Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] H. Mainaud Durand et al., “Frequency Scanning Interferometry as New Solution for on-Line Monitoring Inside a Cryostat for the HL-LHC project”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1986-1989. doi:10.18429/JACoW-IPAC2018-WEPAF068
[n] D. Reagan and T. E. Hostetler, “An Electron Beam Spectrum Monitor using Synchrotron Light”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3297-3300.
[n] W. V. Hassenzahl, E. Hoyer, and R. Savoy, “Design and Test of a Model Pole for the ALS U5.0 Undulator”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2736-2739.
[n] M. Liu, K. C. Chu, C. X. Yin, and L. Y. Zhao, “Development Status of SINAP Timing System”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper MOPD23, pp. 199-201.
[n] B. X. Yang, W. E. Norum, S. E. Shoaf, and J. B. Stevens, “Bunch-by-Bunch Diagnostics at the APS Using Time-Correlated Single-Photon Counting Techniques”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper TUPSM044, pp. 238-242.
[n] P. Chu et al., “XAL-Based Applications and Online Model for LCLS”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5REP022, pp. 4811-4813.
[n] K. Zagar, M. Plesko, R. Sabjan, and I. Verstovsek, “Co-sourcing Development of Accelerator Controls”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT097, pp. 758-760.
[n] H. Schmeing et al., “Current Status of the Superconducting Cyclotron at Chalk River”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper D-03, pp. 88-92.
[n] P. Chen and D. Yu, “Simulation Results of RF Coupler Controllable by Dielectric Fluid”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP129, pp. 1073-1075.
[n] M. Kreider and T. Fleck, “FAIR Timing Master”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper WEPL011, pp. 50-52.
[n] G. R. White et al., “Recent Advancements and Deployments of EPICS Version 4”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 589-592. doi:10.18429/JACoW-ICALEPCS2015-WEA3O02
[n] M. Puglisi, “Status of the Synchrotron Light Source ELETTRA”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 478-481.
[n] B. Jeram et al., “The Control System for the Accelerator of ANKA”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP02E, pp. 1691-1693.
[n] CA. Timossi and H. Nishimura, “A .NET Assembly for EPICS Simple Channel Access”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper MOW02, pp. 34-36.
[n] R. Huhmann, G. Froehlich, S. J??licher, and V. RW. Schaa, “GSI Operation Software: Migration from OpenVMS to Linux”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMS014, pp. 351-353.
[n] T. Friedrich and M. T?Ârngren, “Surveying Software Technology for Accelerator Control Systems”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper MOY03, pp. 16-18.
[n] R. B. Agustsson, J. J. Hartzell, and S. Storms, “Inductively Coupled Pulsed Energy Extraction System for 2G Wire-based Magnets”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEOCA2, pp. 725-727.
[n] R. Huhmann, G. Fr?Âhlich, S. J??licher, and V. R. W. Schaa, “GSI Operating Software Migration OpenVMS to Linux”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper MOX02, pp. 4-6.
[n] R. Frankel et al., “The AGS Booster Control System”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1090-1093.
[n] S. Di Mitri and S. Ferry, “Optics Design and Collimation Efficiency of the FERMI@elettra Collimation System”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper WEPB40, pp. 483-485.
[n] R. B. Agustsson et al., “Normal Conducting Radio Frequency x-band Deflecting Cavity Fabrication and Validation”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPC046, pp. 3389-3391.
[n] Z. Insepov, V. Ivanov, S. J. Jokela, and M. Wetstein, “Comparison of Back-scattering Properties of Electron Emission Materials”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP005, pp. 817-819.
[n] H. Eickhoff, Th. Haberer, and R. Steiner, “Accelerator Control for the GSI Cancer Therapy Project”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP06C, pp. 2348-2350.
[n] E. S. Rodger and H. L. Weisberg, “An Improved Copper Septum Magnet Design”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2832-2833.
[n] A. Burov et al., “Status of High Energy Electron Cooling in FNAL Recycler Ring”, in Proc. RuPAC'06, Novosibirsk, Russia, Sep. 2006, paper WEBO02, pp. XX-XX.
[n] S. Di Mitri, M. Bossi, D. Castronovo, I. Cudin, M. Ferianis, and L. Froehlich, “Electron Beam Collimation for Slice Diagnostics and Generation of Femtosecond Soft X-Ray Pulses from a Free Electron Laser”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper MOPC04, pp. 49-52.
[n] T. Tajima et al., “LANSCE Vacuum System Refurbishment Plan and Vacuum Alert System Improvements for Predictive Maintenance”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP150, pp. 3717-3719.
[n] F. Di Maio, L. Abadie, C. S. Kim, K. Mahajan, D. Stepanov, and N. Utzel, “CODAC Core System, the ITER Software Distribution for I&C”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC079, pp. 281-284.
[n] J. W. Kwan, D. Baca, F. M. Bieniosek, and E. Chacon-Golcher, “Development of High Current Surface Ionization Sources for Heavy Ion Fusion”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH012, pp. 2102-2104.
[n] G. Vismara, “Thhe New Front-end Narrow-band Electronics for the LEP Beam Orbit Measurement System”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1548-1551.
[n] A. Afanasev, Y. S. Derbenev, V. S. Morozov, V. Ivanov, and R. P. Johnson, “Epicyclic Twin-Helix Ionization Cooling Simulations”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP036, pp. 163-165.
[n] J. Seeman et al., “Progress of the PEP-II B-Factory”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAG015, pp. 2297-2299.
[n] W. J. Leonhardt, “A Radiation Hard Dipole Magnet Coils Using Aluminum Clad Copper Conductors”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 366-369.
[n] T. J. Roberts, R. J. Abrams, H. J. Frisch, and V. Ivanov, “Simulations of Picosecond Timing Using Large-Area Photodetectors”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5RFP079, pp. 3630-3632.
[n] L. Corner, L. J. Nevay, and R. Walczak, “Photonic Crystal Fibre Laser for Electron Beam Emittance Measurement”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPO042, pp. 577-579.
[n] A. Rhyder, R. N. Fernandes, and A. C. Starritt, “Qt Based GUI System for EPICS Control Systems”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper WECC03, pp. 10-11.
[n] M. P. Kope?é, L. J. Dudek, A. Kisiel, M. A. Knafel, A. I. Wawrzyniak, and M. Zajac, “Universal Digital Aggregator for in-Line Signal Processing”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 352-354. doi:10.18429/JACoW-IPAC2017-MOPAB096
[n] R. L. Warnock and J. C. Bergstrom, “Coherent Radiation in Whispering Gallery Modes”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP119, pp. 1710-1712.
[n] L. Y. Zhao, D. K. Liu, and C. X. Yin, “The SSRF Timing System”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC162, pp. 3369-3371.
For LaTeX
Use Complete Form
For BibTeX
References
- H. Mainaud Durand et al., “Frequency Scanning Interferometry as New Solution for on-Line Monitoring Inside a Cryostat for the HL-LHC project”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1986-1989.
- D. Reagan and T. E. Hostetler, “An Electron Beam Spectrum Monitor using Synchrotron Light”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3297-3300.
- W. V. Hassenzahl, E. Hoyer, and R. Savoy, “Design and Test of a Model Pole for the ALS U5.0 Undulator”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2736-2739.
- M. Liu, K. C. Chu, C. X. Yin, and L. Y. Zhao, “Development Status of SINAP Timing System”, in Proc. 3rd Int. Beam Instrumentation Conf. (IBIC'14), Monterey, CA, USA, Sep. 2014, paper MOPD23, pp. 199-201.
- B. X. Yang, W. E. Norum, S. E. Shoaf, and J. B. Stevens, “Bunch-by-Bunch Diagnostics at the APS Using Time-Correlated Single-Photon Counting Techniques”, in Proc. 14th Beam Instrumentation Workshop (BIW'10), Santa Fe, NM, USA, May 2010, paper TUPSM044, pp. 238-242.
- P. Chu et al., “XAL-Based Applications and Online Model for LCLS”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5REP022, pp. 4811-4813.
- K. Zagar, M. Plesko, R. Sabjan, and I. Verstovsek, “Co-sourcing Development of Accelerator Controls”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPLT097, pp. 758-760.
- H. Schmeing et al., “Current Status of the Superconducting Cyclotron at Chalk River”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper D-03, pp. 88-92.
- P. Chen and D. Yu, “Simulation Results of RF Coupler Controllable by Dielectric Fluid”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP129, pp. 1073-1075.
- M. Kreider and T. Fleck, “FAIR Timing Master”, in Proc. 8th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'10), Saskatoon, Canada, Oct. 2010, paper WEPL011, pp. 50-52.
- G. R. White et al., “Recent Advancements and Deployments of EPICS Version 4”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 589-592.
- M. Puglisi, “Status of the Synchrotron Light Source ELETTRA”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 478-481.
- B. Jeram et al., “The Control System for the Accelerator of ANKA”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP02E, pp. 1691-1693.
- CA. Timossi and H. Nishimura, “A .NET Assembly for EPICS Simple Channel Access”, in Proc. 7th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'08), Ljbuljana, Slovenia, Oct. 2008, paper MOW02, pp. 34-36.
- R. Huhmann, G. Froehlich, S. J??licher, and V. RW. Schaa, “GSI Operation Software: Migration from OpenVMS to Linux”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPMS014, pp. 351-353.
- T. Friedrich and M. T?Ârngren, “Surveying Software Technology for Accelerator Control Systems”, in Proc. 7th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'08), Ljbuljana, Slovenia, Oct. 2008, paper MOY03, pp. 16-18.
- R. B. Agustsson, J. J. Hartzell, and S. Storms, “Inductively Coupled Pulsed Energy Extraction System for 2G Wire-based Magnets”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper WEOCA2, pp. 725-727.
- R. Huhmann, G. Fr?Âhlich, S. J??licher, and V. R. W. Schaa, “GSI Operating Software Migration OpenVMS to Linux”, in Proc. 7th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'08), Ljbuljana, Slovenia, Oct. 2008, paper MOX02, pp. 4-6.
- R. Frankel et al., “The AGS Booster Control System”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1090-1093.
- S. Di Mitri and S. Ferry, “Optics Design and Collimation Efficiency of the FERMI@elettra Collimation System”, in Proc. 32nd Int. Free Electron Laser Conf. (FEL'10), Malmö, Sweden, Aug. 2010, paper WEPB40, pp. 483-485.
- R. B. Agustsson et al., “Normal Conducting Radio Frequency x-band Deflecting Cavity Fabrication and Validation”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPC046, pp. 3389-3391.
- Z. Insepov, V. Ivanov, S. J. Jokela, and M. Wetstein, “Comparison of Back-scattering Properties of Electron Emission Materials”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP005, pp. 817-819.
- H. Eickhoff, Th. Haberer, and R. Steiner, “Accelerator Control for the GSI Cancer Therapy Project”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP06C, pp. 2348-2350.
- E. S. Rodger and H. L. Weisberg, “An Improved Copper Septum Magnet Design”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2832-2833.
- A. Burov et al., “Status of High Energy Electron Cooling in FNAL Recycler Ring”, in Proc. 20th Russian Particle Accelerator Conf. on Charged Particle Accelerators (RuPAC'06), Novosibirsk, Russia, Sep. 2006, paper WEBO02, pp. XX-XX.
- S. Di Mitri, M. Bossi, D. Castronovo, I. Cudin, M. Ferianis, and L. Froehlich, “Electron Beam Collimation for Slice Diagnostics and Generation of Femtosecond Soft X-Ray Pulses from a Free Electron Laser”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper MOPC04, pp. 49-52.
- T. Tajima et al., “LANSCE Vacuum System Refurbishment Plan and Vacuum Alert System Improvements for Predictive Maintenance”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPP150, pp. 3717-3719.
- F. Di Maio, L. Abadie, C. S. Kim, K. Mahajan, D. Stepanov, and N. Utzel, “CODAC Core System, the ITER Software Distribution for I&C”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC079, pp. 281-284.
- J. W. Kwan, D. Baca, F. M. Bieniosek, and E. Chacon-Golcher, “Development of High Current Surface Ionization Sources for Heavy Ion Fusion”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH012, pp. 2102-2104.
- G. Vismara, “Thhe New Front-end Narrow-band Electronics for the LEP Beam Orbit Measurement System”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1548-1551.
- A. Afanasev, Y. S. Derbenev, V. S. Morozov, V. Ivanov, and R. P. Johnson, “Epicyclic Twin-Helix Ionization Cooling Simulations”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP036, pp. 163-165.
- J. Seeman et al., “Progress of the PEP-II B-Factory”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPAG015, pp. 2297-2299.
- W. J. Leonhardt, “A Radiation Hard Dipole Magnet Coils Using Aluminum Clad Copper Conductors”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 366-369.
- T. J. Roberts, R. J. Abrams, H. J. Frisch, and V. Ivanov, “Simulations of Picosecond Timing Using Large-Area Photodetectors”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH5RFP079, pp. 3630-3632.
- L. Corner, L. J. Nevay, and R. Walczak, “Photonic Crystal Fibre Laser for Electron Beam Emittance Measurement”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPO042, pp. 577-579.
- A. Rhyder, R. N. Fernandes, and A. C. Starritt, “Qt Based GUI System for EPICS Control Systems”, in Proc. 9th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'12), Kolkata, India, Dec. 2012, paper WECC03, pp. 10-11.
- M. P. Kope?é, L. J. Dudek, A. Kisiel, M. A. Knafel, A. I. Wawrzyniak, and M. Zajac, “Universal Digital Aggregator for in-Line Signal Processing”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 352-354.
- R. L. Warnock and J. C. Bergstrom, “Coherent Radiation in Whispering Gallery Modes”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP119, pp. 1710-1712.
- L. Y. Zhao, D. K. Liu, and C. X. Yin, “The SSRF Timing System”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPC162, pp. 3369-3371.
Back to search