Favourites
For Word
[n] P. Cameron et al., “RHIC Third Generation PLL Tune System”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper ROAB009, pp. 524-526.
[n] M. A. Furman, “Studies of e-cloud build up for the FNAL main injector and for the LHC”, in Proc. HB'06, Tsukuba, Japan, May-Jun. 2006, paper TUAX05, pp. 102-106.
[n] Y. Otake, T. Asaka, and T. Inagaki, “Design of a 100 kW Solid-State RF Pulse Amplifier with a TE011 Mode RF Combiner at 476 MHz”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4180-4183. doi:10.18429/JACoW-IPAC2017-THPIK038
[n] D. Beavis et al., “A CCD Beam Profile Monitor for 14.6 GeV/amu
[n] S. Miura et al., “Mass Production Report of C-band Choke Mode Accelerating Structure and RF Pulse Compressor”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPS085, pp. 1737-1739.
[n] D. Stratakis and D. V. Neuffer, “Theoretical Framework to Predict Efficiency of Ionization Cooling Lattices”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1392-1394. doi:10.18429/JACoW-IPAC2014-TUPME021
[n] Y. Igarashi et al., “High-Gradient Tests on S-Band 2m-Long Accelerating Structures for KEKB Injector Linac”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAB050, pp. 2838-2840.
[n] Y. Zhang et al., “Design Status of MEIC at JLab”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP093, pp. 2306-2308.
[n] N. N. Alexeev, S. L. Bereznitsky, and A. E. Bolshakov, “Perturbation of Relevant Resonance for Slow Extraction Efficiency Increase”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8P017, pp. 261-263.
[n] A. Schempp, H. Klein, P. Schastok, K. H. Pape, and S. H. Wang, “Status of the HERA-RFQ Injector”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper WE3-5, pp. 254-256.
[n] J. Q. Li et al., “Development of an All Permanent Magnet ECR Ion Source for Low and Medium Charge State Ions Production”, in Proc. HIAT'18, Lanzhou, China, Oct. 2018, pp. 53-56. doi:10.18429/JACoW-HIAT2018-MOPB10
[n] D. Stratakis, J. S. Berg, H. K. Sayed, D. V. Neuffer, and P. Snopok, “Overview of a muon capture section for muon accelerators”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1398-1400. doi:10.18429/JACoW-IPAC2014-TUPME023
[n] R. P. Fliller et al., “Design of the NSLS-II Top Off Safety System”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1986-1988. doi:10.18429/JACoW-IPAC2015-TUPHA010
[n] B. Beaudoin, D. R. Edstrom, A. H. Lumpkin, J. Ruan, and J. C. T. Thangaraj, “Longitudinal Bunch Shaping at Picosecond Scales using Alpha-BBO Crystals at the Advanced Superconducting Test Accelerator”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 643-645. doi:10.18429/JACoW-IPAC2015-MOPMA043
[n] C. Mitsuda et al., “Suppression of Horizontal Beam Oscillation by using Fast Kicker Magnet System in SPring-8 Storage Ring”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEA031, pp. 2552-2554.
[n] C. Evain, F. Briquez, M.-E. Couprie, M. Labat, A. Loulergue, and V. Malka, “Seeding Schemes on the French FEL Project LUNEX5”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper TUPA06, pp. 198-201.
[n] Y. Shobuda, Y. H. Chin, S. Machida, F. Noda, K. Takata, and T. Toyama, “SIMPSONS with Wake Field Effects”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH054, pp. 2910-2912.
[n] B. Jones, D. J. Adams, B. S. Drumm, M. C. Hughes, A. J. McFarland, and C. M. Warsop, “Progress on Designs for 180 MeV Injection into the ISIS Synchrotron”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPFI063, pp. 428-430.
[n] D. Li et al., “Progress on MICE RFCC Module”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPP093, pp. 3954-3956.
[n] S. Fu et al., “Chinese Plan for ADS and CSNS”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper FRIOB03, pp. 977-982.
[n] Y. Shobuda, P. K. Saha, M. Yamamoto, Y. H. Chin, Y. Irie, and T. Toyama, “The Kicker Impedance and its Effect on the RCS in J-PARC”, in Proc. HB'14, East Lansing, MI, USA, Nov. 2014, paper THO2AB02, pp. 369-373.
[n] M. Siano et al., “Two-dimensional electron beam size measurements with X-ray Heterodyne Near Field Speckles”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2594-2598. doi:10.18429/JACoW-IPAC2023-WEYD1
[n] S. P. Virostek, M. A. Green, T. O. Niinikoski, H. Pan, S. Prestemon, and R. Preece, “Final Assembly and Testing of the MICE Superconducting Spectrometer Solenoids”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPC035, pp. 3362-3364.
[n] T. Hara, “Innovative Ideas for Single-pass FELs”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 12-16. doi:10.18429/JACoW-IPAC2014-MOYAA01
[n] N. Li, C. Chen, H. J. Hu, J. Jin, W. Y. Wen, and L. Yin, “Accurately Determining the Parameters of a Magnet Coil by 3D CAD Design”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPD019, pp. 3539-3541.
[n] G. Prior, I. Efthymiopoulos, D. V. Neuffer, P. Snopok, C. T. Rogers, and D. Stratakis, “Magnet Misalignment Studies for the Front-end of the Neutrino Factory”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPFI019, pp. 1373-1375.
[n] J. A. Clarke et al., “The Conceptual Design of CLARA, A Novel FEL Test Facility for Ultrashort Pulse Generation”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPEA058, pp. 1265-1267.
[n] S. Pordes, J. L. Crisp, B. J. Fellenz, R. H. Flora, A. Para, and A. V. Tollestrup, “Signal Processing for Longitudinal Parameters of the Tevatron Beam”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAT013, pp. 1362-1364.
[n] L. Popielarski, L. J. Dubbs, K. Elliott, I. M. Malloch, R. Oweiss, and J. Popielarski, “Buffered Chemical Polishing Development for the =0.53 Half-Wave Resonator at Michigan State University”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper TUPO057, pp. 526-529.
[n] X. Wu, X. C. Kong, Q. Le, S. Sun, and Y. Zou, “Control System for BEPCII Linac Power Sub-system”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3156-3158. doi:10.18429/JACoW-IPAC2014-THPRO111
[n] L. Piersanti et al., “Technology Developments for ELI-NP Gamma Beam System”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 13-18. doi:10.18429/JACoW-LINAC2018-MO2A03
[n] H. Deitinghoff, H. Klein, and A. Schempp, “Calculations on Beam Formation with Two Coupled RFQs for the EHF Injection Scheme”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper MO3-15, pp. 76-78.
[n] L. S. Nadolski, P. Brunelle, J.-P. Lavieville, P. Lebasque, A. Nadji, and M.-A. Tordeux, “First Frequency Maps for Probing the Non-linear Dynamics of SOLEIL”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC063, pp. 3128-3130.
[n] B. S. Drumm, A. P. Letchford, R. E. Williamson, and M. Keelan, “A New Debunching Cavity for the ISIS H- Injector”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3899-3901. doi:10.18429/JACoW-IPAC2014-THPRI056
[n] A. J. Baltz, C. Chasman, and C. E. Thorn, “Spiral Design and Beam Dynamics for a Variable Energy Cyclotron”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2098-2101.
[n] B. Podobedov, “Short-Range Wakefields of Slowly Tapered Structures”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPR100, pp. 3174-3176.
For LaTeX
Use Complete Form
For BibTeX
References
- P. Cameron et al., “RHIC Third Generation PLL Tune System”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper ROAB009, pp. 524-526.
- M. A. Furman, “Studies of e-cloud build up for the FNAL main injector and for the LHC”, in Proc. 39th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'06), Tsukuba, Japan, May-Jun. 2006, paper TUAX05, pp. 102-106.
- Y. Otake, T. Asaka, and T. Inagaki, “Design of a 100 kW Solid-State RF Pulse Amplifier with a TE011 Mode RF Combiner at 476 MHz”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4180-4183.
- D. Beavis et al., “A CCD Beam Profile Monitor for 14.6 GeV/amu
- S. Miura et al., “Mass Production Report of C-band Choke Mode Accelerating Structure and RF Pulse Compressor”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPS085, pp. 1737-1739.
- D. Stratakis and D. V. Neuffer, “Theoretical Framework to Predict Efficiency of Ionization Cooling Lattices”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1392-1394.
- Y. Igarashi et al., “High-Gradient Tests on S-Band 2m-Long Accelerating Structures for KEKB Injector Linac”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPAB050, pp. 2838-2840.
- Y. Zhang et al., “Design Status of MEIC at JLab”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper THP093, pp. 2306-2308.
- N. N. Alexeev, S. L. Bereznitsky, and A. E. Bolshakov, “Perturbation of Relevant Resonance for Slow Extraction Efficiency Increase”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 8P017, pp. 261-263.
- A. Schempp, H. Klein, P. Schastok, K. H. Pape, and S. H. Wang, “Status of the HERA-RFQ Injector”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper WE3-5, pp. 254-256.
- J. Q. Li et al., “Development of an All Permanent Magnet ECR Ion Source for Low and Medium Charge State Ions Production”, in Proc. 14th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'18), Lanzhou, China, Oct. 2018, pp. 53-56.
- D. Stratakis, J. S. Berg, H. K. Sayed, D. V. Neuffer, and P. Snopok, “Overview of a muon capture section for muon accelerators”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1398-1400.
- R. P. Fliller et al., “Design of the NSLS-II Top Off Safety System”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1986-1988.
- B. Beaudoin, D. R. Edstrom, A. H. Lumpkin, J. Ruan, and J. C. T. Thangaraj, “Longitudinal Bunch Shaping at Picosecond Scales using Alpha-BBO Crystals at the Advanced Superconducting Test Accelerator”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 643-645.
- C. Mitsuda et al., “Suppression of Horizontal Beam Oscillation by using Fast Kicker Magnet System in SPring-8 Storage Ring”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEA031, pp. 2552-2554.
- C. Evain, F. Briquez, M.-E. Couprie, M. Labat, A. Loulergue, and V. Malka, “Seeding Schemes on the French FEL Project LUNEX5”, in Proc. 33rd Int. Free Electron Laser Conf. (FEL'11), Shanghai, China, Aug. 2011, paper TUPA06, pp. 198-201.
- Y. Shobuda, Y. H. Chin, S. Machida, F. Noda, K. Takata, and T. Toyama, “SIMPSONS with Wake Field Effects”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPCH054, pp. 2910-2912.
- B. Jones, D. J. Adams, B. S. Drumm, M. C. Hughes, A. J. McFarland, and C. M. Warsop, “Progress on Designs for 180 MeV Injection into the ISIS Synchrotron”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPFI063, pp. 428-430.
- D. Li et al., “Progress on MICE RFCC Module”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPP093, pp. 3954-3956.
- S. Fu et al., “Chinese Plan for ADS and CSNS”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper FRIOB03, pp. 977-982.
- Y. Shobuda, P. K. Saha, M. Yamamoto, Y. H. Chin, Y. Irie, and T. Toyama, “The Kicker Impedance and its Effect on the RCS in J-PARC”, in Proc. 54th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'14), East Lansing, MI, USA, Nov. 2014, paper THO2AB02, pp. 369-373.
- M. Siano et al., “Two-dimensional electron beam size measurements with X-ray Heterodyne Near Field Speckles”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEYD1, pp. 2594-2598.
- S. P. Virostek, M. A. Green, T. O. Niinikoski, H. Pan, S. Prestemon, and R. Preece, “Final Assembly and Testing of the MICE Superconducting Spectrometer Solenoids”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPC035, pp. 3362-3364.
- T. Hara, “Innovative Ideas for Single-pass FELs”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 12-16.
- N. Li, C. Chen, H. J. Hu, J. Jin, W. Y. Wen, and L. Yin, “Accurately Determining the Parameters of a Magnet Coil by 3D CAD Design”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPD019, pp. 3539-3541.
- G. Prior, I. Efthymiopoulos, D. V. Neuffer, P. Snopok, C. T. Rogers, and D. Stratakis, “Magnet Misalignment Studies for the Front-end of the Neutrino Factory”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPFI019, pp. 1373-1375.
- J. A. Clarke et al., “The Conceptual Design of CLARA, A Novel FEL Test Facility for Ultrashort Pulse Generation”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPEA058, pp. 1265-1267.
- S. Pordes, J. L. Crisp, B. J. Fellenz, R. H. Flora, A. Para, and A. V. Tollestrup, “Signal Processing for Longitudinal Parameters of the Tevatron Beam”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAT013, pp. 1362-1364.
- L. Popielarski, L. J. Dubbs, K. Elliott, I. M. Malloch, R. Oweiss, and J. Popielarski, “Buffered Chemical Polishing Development for the =0.53 Half-Wave Resonator at Michigan State University”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper TUPO057, pp. 526-529.
- X. Wu, X. C. Kong, Q. Le, S. Sun, and Y. Zou, “Control System for BEPCII Linac Power Sub-system”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3156-3158.
- L. Piersanti et al., “Technology Developments for ELI-NP Gamma Beam System”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 13-18.
- H. Deitinghoff, H. Klein, and A. Schempp, “Calculations on Beam Formation with Two Coupled RFQs for the EHF Injection Scheme”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper MO3-15, pp. 76-78.
- L. S. Nadolski, P. Brunelle, J.-P. Lavieville, P. Lebasque, A. Nadji, and M.-A. Tordeux, “First Frequency Maps for Probing the Non-linear Dynamics of SOLEIL”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPC063, pp. 3128-3130.
- B. S. Drumm, A. P. Letchford, R. E. Williamson, and M. Keelan, “A New Debunching Cavity for the ISIS H- Injector”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3899-3901.
- A. J. Baltz, C. Chasman, and C. E. Thorn, “Spiral Design and Beam Dynamics for a Variable Energy Cyclotron”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2098-2101.
- B. Podobedov, “Short-Range Wakefields of Slowly Tapered Structures”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPR100, pp. 3174-3176.
Back to search