Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] K. Ko, “Computer Codes for RF Cavity Design”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TU1-01, pp. 253-257.
[n] Y. Takeuchi, Y. Iwashita, and H. Tongu, “Development of Real-Time Mass Analysis System with Permanent Magnet for Ion Beam”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2236-2238. doi:10.18429/JACoW-IPAC2018-WEPAL033
[n] J. N. Galayda, L. N. Blumberg, R. N. Heese, and H. C. H. Hsieh, “Beam Optical Properties of the NSLS Dipoles”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2593-2596.
[n] S. H. Kim, Y. H. Kim, H. S. Kim, K. O. Lee, and K. H. Chung, “Design of the Superconducting Linac for KOMAC”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4E203, pp. 295-297.
[n] J. N. Galayda, “The LCLS-II: A High Power Upgrade to the LCLS”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 18-23. doi:10.18429/JACoW-IPAC2018-MOYGB2
[n] V. A. Alexandrof et al., “Results of Final Focus Test Beam”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAG01, pp. 2742-2746.
[n] N. Thompson, K.-J. Boller, D. J. Dunning, J. G. Karssenberg, B. W. J. McNeil, and P. J. M. van der Slot, “A 3D Model of the 4GLS VUV-FEL Conceptual Design Including Improved Modelling of the Optical Cavity”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper TUPPH001, pp. 304-307.
[n] A. Erko and A. Firsov, “Reflection Zone Plates for Free Electron Laser Optics”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper TUPPH062, pp. XX-XX.
[n] R. Armenta and E. A. Paiser, “LCLS Pulse Selector, A Multifunction Shutter for the LCLS-I 120 Hz FEL”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 336-339. doi:10.18429/JACoW-MEDSI2018-THPH02
[n] C. J. Spataro, F. C. Lincoln, and S. K. Sharma, “NSLS-II Vibration Studies to Characterize Beamline Stability”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 267-269. doi:10.18429/JACoW-MEDSI2018-WEPH29
[n] M. Vretenar et al., “Conceptual design of a compact synchrotron-based facility for cancer therapy and biomedical research with helium and proton beams”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 5024-5027. doi:10.18429/JACoW-IPAC2023-THPM058
[n] F. Hinode et al., “Present Status of Thermionic RF-Gun for Terahertz Source Project at Tohoku University”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper MOPD45, pp. 137-139.
For LaTeX
Use Complete Form
For BibTeX
References
- K. Ko, “Computer Codes for RF Cavity Design”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TU1-01, pp. 253-257.
- Y. Takeuchi, Y. Iwashita, and H. Tongu, “Development of Real-Time Mass Analysis System with Permanent Magnet for Ion Beam”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2236-2238.
- J. N. Galayda, L. N. Blumberg, R. N. Heese, and H. C. H. Hsieh, “Beam Optical Properties of the NSLS Dipoles”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2593-2596.
- S. H. Kim, Y. H. Kim, H. S. Kim, K. O. Lee, and K. H. Chung, “Design of the Superconducting Linac for KOMAC”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 4E203, pp. 295-297.
- J. N. Galayda, “The LCLS-II: A High Power Upgrade to the LCLS”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 18-23.
- V. A. Alexandrof et al., “Results of Final Focus Test Beam”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAG01, pp. 2742-2746.
- N. Thompson, K.-J. Boller, D. J. Dunning, J. G. Karssenberg, B. W. J. McNeil, and P. J. M. van der Slot, “A 3D Model of the 4GLS VUV-FEL Conceptual Design Including Improved Modelling of the Optical Cavity”, in Proc. 28th Int. Free Electron Laser Conf. (FEL'06), Berlin, Germany, Aug.-Sep. 2006, paper TUPPH001, pp. 304-307.
- A. Erko and A. Firsov, “Reflection Zone Plates for Free Electron Laser Optics”, in Proc. 28th Int. Free Electron Laser Conf. (FEL'06), Berlin, Germany, Aug.-Sep. 2006, paper TUPPH062, pp. XX-XX.
- R. Armenta and E. A. Paiser, “LCLS Pulse Selector, A Multifunction Shutter for the LCLS-I 120 Hz FEL”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 336-339.
- C. J. Spataro, F. C. Lincoln, and S. K. Sharma, “NSLS-II Vibration Studies to Characterize Beamline Stability”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 267-269.
- M. Vretenar et al., “Conceptual design of a compact synchrotron-based facility for cancer therapy and biomedical research with helium and proton beams”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPM058, pp. 5024-5027.
- F. Hinode et al., “Present Status of Thermionic RF-Gun for Terahertz Source Project at Tohoku University”, in Proc. 34th Int. Free Electron Laser Conf. (FEL'12), Nara, Japan, Aug. 2012, paper MOPD45, pp. 137-139.
Back to search