Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. Justus et al., “Upgrade of the Machine Interlock System for the ELBE Accelerator Facility”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 469-471. doi:10.18429/JACoW-IPAC2014-MOPME044
[n] J. Wu et al., “Peak Current, Energy, and Trajectory Regulation and Feedback for the LCLS Electron Bunch”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5RFP046, pp. 2373-2375.
[n] H. S. Matis, P. Humphreys, A. Ratti, W. C. Turner, R. Miyamoto, and J. Stiller, “Simulations of the LHC High Luminosity Monitors at Beam Energies 3.5 TeV to 7.0 TeV”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP202, pp. 471-473.
[n] S. P. Antipov et al., “Experimental Test of Semiconductor Dechirper”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1932-1934. doi:10.18429/JACoW-IPAC2015-TUPMA043
[n] C. Moore and H. Jostlein, “A Laser Alignment System for Low Beta Quadrupoles”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 631-634.
[n] A. Roy et al., “Status of Superconducting Linac Booster for NSC Pelletron”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97A30, pp. 265-268.
[n] M. Kreider et al., “Launching the FAIR Timing System with CRYRING”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper TCO304, pp. 152-154.
[n] J. N. Bai et al., “First Idea on Bunch to Bucket Transfer for FAIR”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper FPO024, pp. 207-209.
[n] F. Zummack et al., “Status of the Fiber Link Stabilization Units at FLASH”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper MOPC33, pp. 139-142.
[n] F. Epaud, J. M. Koch, and E. Plouviez, “Architecture and Control of the Fast Orbit Correction for the ESRF Storage Ring”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPKS014, pp. 189-191.
[n] J. V. Campelo, “Longitudinal Impedance Characterization of the CERN SPS Vacuum Flanges”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 363-365. doi:10.18429/JACoW-IPAC2015-MOPJE036
[n] S. Petitdemange, L. Claustre, A. Homs, R. Homs Regojo, and E. Papillon, “The LIMA Project Update”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper FRCOAAB08, pp. 1489-1492.
[n] P. F. Dahl, S. Giordano, J. P. Hannwacker, K. Jellett, G. Parzen, and D. E. Young, “Linac Cavity Field Calculations”, in Proc. LINAC'66, Los Alamos, NM, USA, Oct. 1966, paper III-06, pp. 115-118.
[n] L. Sanchez et al., “Design, Fabrication and Tests of the Second Prototype of the Double-Length CLIC PETS”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3887-3889. doi:10.18429/JACoW-IPAC2014-THPRI052
[n] D. J. Newsham, N. Barov, and J. S. Kim, “Rapidly Tunable RF Cavity for FFAG Accelerators”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP016, pp. 843-845.
[n] R. Gerig, C. Moore, and S. Pruss, “Beam Quality Measurements in Fermilab Main Ring”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2177-2180.
[n] R. J. Macek et al., “Electron Cloud Generation and Trapping in a Quadrupole Magnet at the LANL PSR”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUODAB02, pp. 828-830.
[n] P. F. Dahl, R. Christian, and G. Parzen, “Computer Calculations of the Magnetic Field of Alternating Gradient Synchrotron Magnets”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 408-412.
[n] S. G. Anderson, J. B. Rosenzweig, J. Crane, and G. P. Le Sage, “Emittance Measurements of the Space Charge Dominated Thomson Source Photoinjector”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH073, pp. 2260-2262.
[n] W. Chen, C. Cao, C. Shi, and Z. Yin, “End Chamfer Study and Field Measurements of the BEPCII Dipoles”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPT004, pp. 919-921.
[n] L. Solomon, D. Lynch, J. Safranek, and O. Singh, “Chamber Motion Measurements at the NSLS X-RAY Ring”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA167, pp. 2244-2246.
[n] J. Wieland, A. Romanov, A. Valishev, G. Stancari, and N. Kuklev, “Measured dynamic aperture and detuning of nonlinear integrable optics”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3019-3022. doi:10.18429/JACoW-IPAC2024-THPC21
[n] J. C. Cornell and C. M. Merry, “Proposed Transfer Beamline for the NAC”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3221-3224.
[n] P. Chen, M. Lundquist, R. Yi, and D. Yu, “Synchronizable High Voltage Pulser with Laser-Photocathode Trigger”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUOBC01, pp. 862-864.
[n] A. R. Bainbridge, J. A. Clarke, B. J. A. Shepherd, N. A. Collomb, and M. Modena, “The ZEPTO Dipole: Zero Power Tuneable Optics for CLIC”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4338-4341. doi:10.18429/JACoW-IPAC2017-THPIK105
[n] J. S. Diamond, A. Ibrahim, N. Liu, E. S. M. McCrory, and A. Semenov, “A VME and FPGA Based Data Acquisition System for Intensity Monitors”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 317-319. doi:10.18429/JACoW-NAPAC2016-TUPOA16
[n] J. M. Koch, F. Epaud, E. Plouviez, and K. B. Scheidt, “Fast Orbit Correction for the ESRF Storage Ring”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPKS010, pp. 177-179.
[n] U. Masood et al., “Novel Approach to Utilize Proton Beams from High Power Laser Accelerators for Therapy”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1905-1907. doi:10.18429/JACoW-IPAC2016-TUPOY003
[n] J. V. Campelo et al., “An Extended SPS Longitudinal Impedance Model”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 360-362. doi:10.18429/JACoW-IPAC2015-MOPJE035
[n] K. S. White, “Status and Future Developments in Large Accelerator Control Systems”, in Proc. ICAP'06, Chamonix, Switzerland, Oct. 2006, paper WEA2IS01, pp. 239-244.
[n] I. J. Gillingham, T. Friedrich, S. C. Lay, and R. Mercado, “Experiences and Lessons Learned in Transitioning Beamline Front-Ends from VMEbus to Modular Distributed I/O”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 121-124. doi:10.18429/JACoW-ICALEPCS2015-MOPGF019
[n] S. P. Antipov et al., “Single Crystal Diamond X-ray Lens Development”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3643-3644. doi:10.18429/JACoW-IPAC2016-THPMW041
[n] N. I. Her et al., “Design of The Superconducting Magnet Supporting Post for KSTAR Tokamak”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TH476, pp. 773-775.
[n] A. Fry, E. Hahn, W. Hartung, M. Kuchnir, P. Michelato, and D. Sertore, “Experience at Fermilab with High Quantum Efficiency Photo-Cathodes for RF Electron Guns”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU4101, pp. 642-644.
[n] E. P. Gibbons, M. T. Heron, and N. P. Rees, “GDA and EPICS Working in Unison for Science Driven Data Acquisition and Control at Diamond Light Source”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper TUAAUST01, pp. 529-532.
[n] S. S. Karkare, I. V. Bazarov, L. Cultrera, W. J. Schaff, X. G. Jin, and Y. Takeda, “Photoemission from III-V Semiconductor Cathodes”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 736-738. doi:10.18429/JACoW-IPAC2014-MOPRI057
[n] E. Forest and H. Nishimura, “Vertically Integraged Simulation Tools for Self-Consistent Tracking and Analysis”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1304-1307.
[n] R. Baer, M. Schwickert, U. Weinrich, and T. Fleck, “Experiences with an Industrial Control System: Traceability of Specifications, Commissioning Support and Conclusions from the HICAT Project”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper TPPB39, pp. 247-249.
[n] P. Bambade and R. Erickson, “Beam-Beam Deflections as an Interaction Point Diagnostic for the SLC”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper TH3-16, pp. 475-477.
[n] S. Adam, A. Adelmann, and R. D?Âlling, “Steps to Enhance the Knowledge on Space Charge Effects”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper K-4, pp. XX-XX.
[n] Z. Yin, Y. Wu, and J. F. Zhang, “Design and Experiment of the BEPCII IR Conventional Dual Aperture Quadrupole”, presented at the PAC'05, Knoxville, TN, USA, May 2005, paper MPPT002, unpublished.
[n] M. Kim and M. Kwon, “LabVIEW-EPICS Interfaces in KSTAR Control System”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper MP519, pp. XX-XX.
[n] J. E. Baader, “Development and Commissioning of a Flip Coil System for Measuring Field Integrals”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 484-487. doi:10.18429/JACoW-FEL2019-WEP067
[n] P. Asboe-Hansen et al., “Acceleration and Stacking of Deuterons in the CERN PS and ISR”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1557-1561.
[n] S. Barbanotti et al., “Connection of EU-XFEL Cryomodules, Caps, Boxes in EU-XFEL Main Linac and Injector: Welding of Cryo-Pipes and Assembly of Beam-Line Absorbers Under Requirements of PED Regulation”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper TUPB108, pp. 883-887.
[n] S. C. Joshi et al., “R&D Activities on High Intensity Superconducting Proton Linac at RRCAT”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper THPB003, pp. 843-845.
[n] S. Roy Chaudhuri, A. S. Banerjee, P. Patwari, and L. Van den Heever, “Data Driven Simulation Framework”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 749-752. doi:10.18429/JACoW-ICALEPCS2015-WEPGF025
[n] A. Lasheen et al., “Synchrotron Frequency Shift as a Probe of the CERN SPS Reactive Impedance”, in Proc. HB'14, East Lansing, MI, USA, Nov. 2014, paper THO4LR02, pp. 409-413.
[n] N. Dobeck et al., “Precision, 32 Channel Power Supply System”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TU465, pp. 490-492.
[n] L. Hechler, “Converting Equipment Control Software from Pascal to C/C++”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper WEAP034, pp. XX-XX.
[n] P. Jines and B. Craft, “PLC Based Upgrades for the CAMD Linac and Storage Ring Control System”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper WEAP037, pp. XX-XX.
[n] J. Dorfan, W. A. Barletta, A. Hutton, and M. S. Zisman, “PEP-II Asymmetric B. Factory: R & D Results”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 459-462.
[n] M. H. Burt et al., “An Improved Polarisation Analyser for the I16 Beamline at Diamond”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 346-348. doi:10.18429/JACoW-MEDSI2018-THPH05
For LaTeX
Use Complete Form
For BibTeX
References
- M. Justus et al., “Upgrade of the Machine Interlock System for the ELBE Accelerator Facility”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 469-471.
- J. Wu et al., “Peak Current, Energy, and Trajectory Regulation and Feedback for the LCLS Electron Bunch”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5RFP046, pp. 2373-2375.
- H. S. Matis, P. Humphreys, A. Ratti, W. C. Turner, R. Miyamoto, and J. Stiller, “Simulations of the LHC High Luminosity Monitors at Beam Energies 3.5 TeV to 7.0 TeV”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP202, pp. 471-473.
- S. P. Antipov et al., “Experimental Test of Semiconductor Dechirper”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1932-1934.
- C. Moore and H. Jostlein, “A Laser Alignment System for Low Beta Quadrupoles”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 631-634.
- A. Roy et al., “Status of Superconducting Linac Booster for NSC Pelletron”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97A30, pp. 265-268.
- M. Kreider et al., “Launching the FAIR Timing System with CRYRING”, in Proc. 10th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'14), Karlsruhe, Germany, Oct. 2014, paper TCO304, pp. 152-154.
- J. N. Bai et al., “First Idea on Bunch to Bucket Transfer for FAIR”, in Proc. 10th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'14), Karlsruhe, Germany, Oct. 2014, paper FPO024, pp. 207-209.
- F. Zummack et al., “Status of the Fiber Link Stabilization Units at FLASH”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper MOPC33, pp. 139-142.
- F. Epaud, J. M. Koch, and E. Plouviez, “Architecture and Control of the Fast Orbit Correction for the ESRF Storage Ring”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPKS014, pp. 189-191.
- J. V. Campelo, “Longitudinal Impedance Characterization of the CERN SPS Vacuum Flanges”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 363-365.
- S. Petitdemange, L. Claustre, A. Homs, R. Homs Regojo, and E. Papillon, “The LIMA Project Update”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper FRCOAAB08, pp. 1489-1492.
- P. F. Dahl, S. Giordano, J. P. Hannwacker, K. Jellett, G. Parzen, and D. E. Young, “Linac Cavity Field Calculations”, in Proc. 1966 Linear Accelerator Conf. (LINAC'66), Los Alamos, NM, USA, Oct. 1966, paper III-06, pp. 115-118.
- L. Sanchez et al., “Design, Fabrication and Tests of the Second Prototype of the Double-Length CLIC PETS”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3887-3889.
- D. J. Newsham, N. Barov, and J. S. Kim, “Rapidly Tunable RF Cavity for FFAG Accelerators”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5PFP016, pp. 843-845.
- R. Gerig, C. Moore, and S. Pruss, “Beam Quality Measurements in Fermilab Main Ring”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2177-2180.
- R. J. Macek et al., “Electron Cloud Generation and Trapping in a Quadrupole Magnet at the LANL PSR”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUODAB02, pp. 828-830.
- P. F. Dahl, R. Christian, and G. Parzen, “Computer Calculations of the Magnetic Field of Alternating Gradient Synchrotron Magnets”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 408-412.
- S. G. Anderson, J. B. Rosenzweig, J. Crane, and G. P. Le Sage, “Emittance Measurements of the Space Charge Dominated Thomson Source Photoinjector”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH073, pp. 2260-2262.
- W. Chen, C. Cao, C. Shi, and Z. Yin, “End Chamfer Study and Field Measurements of the BEPCII Dipoles”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPT004, pp. 919-921.
- L. Solomon, D. Lynch, J. Safranek, and O. Singh, “Chamber Motion Measurements at the NSLS X-RAY Ring”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEA167, pp. 2244-2246.
- J. Wieland, A. Romanov, A. Valishev, G. Stancari, and N. Kuklev, “Measured dynamic aperture and detuning of nonlinear integrable optics”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPC21, pp. 3019-3022.
- J. C. Cornell and C. M. Merry, “Proposed Transfer Beamline for the NAC”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3221-3224.
- P. Chen, M. Lundquist, R. Yi, and D. Yu, “Synchronizable High Voltage Pulser with Laser-Photocathode Trigger”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUOBC01, pp. 862-864.
- A. R. Bainbridge, J. A. Clarke, B. J. A. Shepherd, N. A. Collomb, and M. Modena, “The ZEPTO Dipole: Zero Power Tuneable Optics for CLIC”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4338-4341.
- J. S. Diamond, A. Ibrahim, N. Liu, E. S. M. McCrory, and A. Semenov, “A VME and FPGA Based Data Acquisition System for Intensity Monitors”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 317-319.
- J. M. Koch, F. Epaud, E. Plouviez, and K. B. Scheidt, “Fast Orbit Correction for the ESRF Storage Ring”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPKS010, pp. 177-179.
- U. Masood et al., “Novel Approach to Utilize Proton Beams from High Power Laser Accelerators for Therapy”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1905-1907.
- J. V. Campelo et al., “An Extended SPS Longitudinal Impedance Model”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 360-362.
- K. S. White, “Status and Future Developments in Large Accelerator Control Systems”, in Proc. 9th Int. Computational Accelerator Physics Conf. (ICAP'06), Chamonix, Switzerland, Oct. 2006, paper WEA2IS01, pp. 239-244.
- I. J. Gillingham, T. Friedrich, S. C. Lay, and R. Mercado, “Experiences and Lessons Learned in Transitioning Beamline Front-Ends from VMEbus to Modular Distributed I/O”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 121-124.
- S. P. Antipov et al., “Single Crystal Diamond X-ray Lens Development”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3643-3644.
- N. I. Her et al., “Design of The Superconducting Magnet Supporting Post for KSTAR Tokamak”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TH476, pp. 773-775.
- A. Fry, E. Hahn, W. Hartung, M. Kuchnir, P. Michelato, and D. Sertore, “Experience at Fermilab with High Quantum Efficiency Photo-Cathodes for RF Electron Guns”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TU4101, pp. 642-644.
- E. P. Gibbons, M. T. Heron, and N. P. Rees, “GDA and EPICS Working in Unison for Science Driven Data Acquisition and Control at Diamond Light Source”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper TUAAUST01, pp. 529-532.
- S. S. Karkare, I. V. Bazarov, L. Cultrera, W. J. Schaff, X. G. Jin, and Y. Takeda, “Photoemission from III-V Semiconductor Cathodes”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 736-738.
- E. Forest and H. Nishimura, “Vertically Integraged Simulation Tools for Self-Consistent Tracking and Analysis”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1304-1307.
- R. Baer, M. Schwickert, U. Weinrich, and T. Fleck, “Experiences with an Industrial Control System: Traceability of Specifications, Commissioning Support and Conclusions from the HICAT Project”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper TPPB39, pp. 247-249.
- P. Bambade and R. Erickson, “Beam-Beam Deflections as an Interaction Point Diagnostic for the SLC”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper TH3-16, pp. 475-477.
- S. Adam, A. Adelmann, and R. D?Âlling, “Steps to Enhance the Knowledge on Space Charge Effects”, in Proc. 16th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'01), East Lansing, MI, USA, May 2001, paper K-4, pp. XX-XX.
- Z. Yin, Y. Wu, and J. F. Zhang, “Design and Experiment of the BEPCII IR Conventional Dual Aperture Quadrupole”, presented at the 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPT002, unpublished.
- M. Kim and M. Kwon, “LabVIEW-EPICS Interfaces in KSTAR Control System”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper MP519, pp. XX-XX.
- J. E. Baader, “Development and Commissioning of a Flip Coil System for Measuring Field Integrals”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 484-487.
- P. Asboe-Hansen et al., “Acceleration and Stacking of Deuterons in the CERN PS and ISR”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1557-1561.
- S. Barbanotti et al., “Connection of EU-XFEL Cryomodules, Caps, Boxes in EU-XFEL Main Linac and Injector: Welding of Cryo-Pipes and Assembly of Beam-Line Absorbers Under Requirements of PED Regulation”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper TUPB108, pp. 883-887.
- S. C. Joshi et al., “R&D Activities on High Intensity Superconducting Proton Linac at RRCAT”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper THPB003, pp. 843-845.
- S. Roy Chaudhuri, A. S. Banerjee, P. Patwari, and L. Van den Heever, “Data Driven Simulation Framework”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 749-752.
- A. Lasheen et al., “Synchrotron Frequency Shift as a Probe of the CERN SPS Reactive Impedance”, in Proc. 54th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'14), East Lansing, MI, USA, Nov. 2014, paper THO4LR02, pp. 409-413.
- N. Dobeck et al., “Precision, 32 Channel Power Supply System”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TU465, pp. 490-492.
- L. Hechler, “Converting Equipment Control Software from Pascal to C/C++”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper WEAP034, pp. XX-XX.
- P. Jines and B. Craft, “PLC Based Upgrades for the CAMD Linac and Storage Ring Control System”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper WEAP037, pp. XX-XX.
- J. Dorfan, W. A. Barletta, A. Hutton, and M. S. Zisman, “PEP-II Asymmetric B. Factory: R & D Results”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 459-462.
- M. H. Burt et al., “An Improved Polarisation Analyser for the I16 Beamline at Diamond”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 346-348.
Back to search