Favourites
For Word
[n] L. Hendrickson, N. Phinney, and L. Sanchez-Chopitea, “Correlation Plot Facility in the SLC Control System”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1317-1320.
[n] P. Emma and W. Spence, “Grid Scans: A Transfer Map Diagnostic”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1549-1552.
[n] B. Cheymol, “Effects of Energy Deposition Models and Conductive Cooling on Wire Scanner Thermal Load, Analytical and Finite Element Analysis Approach”, in Proc. HB'16, Malmö, Sweden, Jul. 2016, pp. 221-225. doi:10.18429/JACoW-HB2016-MOPL016
[n] S. Huang, B. Jia, J. Y. Li, and Y. K. Wu, “Calibration of Spectrometers with Undulator Radiation”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP152, pp. 2402-2404.
[n] S. L. Smith et al., “Progress of the DIAMOND Storage Ring and Injector Design.”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPKF067, pp. 2418-2420.
[n] Y. I. Kim et al., “Cavity Beam Position Monitor at Interaction Point Region of Accelerator Test Facility 2”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWA058, pp. 807-809.
[n] L. Ives et al., “Development of Improved Cathodes for High Power RF Sources”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAE016, pp. 1113-1115.
[n] B. J. King, “Discussion on Muon Collider Parameters at Center of Mass Energies from 0.1 TeV to 100 TeV”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP05G, pp. 841-843.
[n] M. G. Abbott and T. M. Cobb, “An EPICS IOC Builder”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMU032, pp. 506-509.
[n] M. J. Furseman et al., “Adopting and Adapting Control System Studio at Diamond Light Source”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 1032-1035. doi:10.18429/JACoW-ICALEPCS2015-WEPGF137
[n] L. Sanchez-Chopitea, P. Emma, and D. Van Olst, “Orbit Monitoring in the SLC”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1284-1287.
[n] M. M. Al Shehab and M. Quispe, “Overview of Sesame Water Cooling System Design & Operation”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 108-110. doi:10.18429/JACoW-MEDSI2018-TUPH32
[n] M. McCarthy, “LLRF Requirements for APT”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH010, pp. 788-790.
[n] T. L. He, H. Xu, W. Xu, and S. C. Zhang, “Design of the Magnets of the Far-Infrared FEL Project at NSRL”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3269-3271. doi:10.18429/JACoW-IPAC2016-THPMB021
For LaTeX
Use Complete Form
For BibTeX
References
- L. Hendrickson, N. Phinney, and L. Sanchez-Chopitea, “Correlation Plot Facility in the SLC Control System”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1317-1320.
- P. Emma and W. Spence, “Grid Scans: A Transfer Map Diagnostic”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1549-1552.
- B. Cheymol, “Effects of Energy Deposition Models and Conductive Cooling on Wire Scanner Thermal Load, Analytical and Finite Element Analysis Approach”, in Proc. 57th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'16), Malmö, Sweden, Jul. 2016, pp. 221-225.
- S. Huang, B. Jia, J. Y. Li, and Y. K. Wu, “Calibration of Spectrometers with Undulator Radiation”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper THP152, pp. 2402-2404.
- S. L. Smith et al., “Progress of the DIAMOND Storage Ring and Injector Design.”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPKF067, pp. 2418-2420.
- Y. I. Kim et al., “Cavity Beam Position Monitor at Interaction Point Region of Accelerator Test Facility 2”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPWA058, pp. 807-809.
- L. Ives et al., “Development of Improved Cathodes for High Power RF Sources”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAE016, pp. 1113-1115.
- B. J. King, “Discussion on Muon Collider Parameters at Center of Mass Energies from 0.1 TeV to 100 TeV”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP05G, pp. 841-843.
- M. G. Abbott and T. M. Cobb, “An EPICS IOC Builder”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPMU032, pp. 506-509.
- M. J. Furseman et al., “Adopting and Adapting Control System Studio at Diamond Light Source”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 1032-1035.
- L. Sanchez-Chopitea, P. Emma, and D. Van Olst, “Orbit Monitoring in the SLC”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1284-1287.
- M. M. Al Shehab and M. Quispe, “Overview of Sesame Water Cooling System Design & Operation”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 108-110.
- M. McCarthy, “LLRF Requirements for APT”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH010, pp. 788-790.
- T. L. He, H. Xu, W. Xu, and S. C. Zhang, “Design of the Magnets of the Far-Infrared FEL Project at NSRL”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3269-3271.
Back to search
