Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] B. S. Lee et al., “Development of Interface and Diagnostic System for ECR ion source At KBSI”, in Proc. ECRIS'14, Nizhny Novgorod, Russia, Aug. 2014, paper MOPPH011, pp. 61-63.
[n] A. A. Bortsova, H. G. Khodzhibagiyan, and D. Nikiforov, “Thermodynamic Characteristics of the Superconducting Quadrupole Magnets of the NICA Booster Synchrotron”, in Proc. RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, pp. 162-164. doi:10.18429/JACoW-RuPAC2021-MOPSA15
[n] G. Torrisi et al., “Low Power RF Test of a Quadrupole-free X-Band Mode Launcher for High Brightness Applications”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2856-2859. doi:10.18429/JACoW-IPAC2019-WEPRB024
[n] O. O. Andreassen et al., “Turn-key Applications for Accelerators with LabVIEW-RADE”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEMAU007, pp. 670-672.
[n] E. Syresin et al., “Design of a Novel Tubular Electron String Ion Source (TESIS)”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC141, pp. 403-405.
[n] J. Hormes, “Wednesday Welcome by Josef Hormes”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper WETA01, pp. XX-XX.
[n] G. J. Rosaz et al., “Development of Nb3Sn Coatings by Magnetron Sputtering for SRF Cavities”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper TUPB051, pp. 691-694.
[n] A. Blednykh and S. Krinsky, “Preliminary Impedance Budget for the NSLS-II Storage Ring”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMS102, pp. 4321-4323.
[n] G. Burt et al., “Power Coupler for the ILC Crab Cavity”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMN079, pp. 2212-2214.
[n] R. Eichhorn et al., “Cornell's HOM Beamline Absorbers”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWO059, pp. 2441-2443.
[n] J. Galambos et al., “SNS Linac Upgrade Plans for the Second Target Station”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP114, pp. 320-322.
[n] B. K. Popovic, L. Teofili, and C. Vollinger, “Impedance Analysis of New PS Internal Dump Design”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3083-3086. doi:10.18429/JACoW-IPAC2018-THPAF052
[n] A. Sublet et al., “Preliminary Results of Nb Thin Film Coating for HIE-ISOLDE SRF Cavities Obtained by Magnetron Sputtering”, in Proc. SRF'13, Paris, France, Sep. 2013, paper TUP076, pp. 620-622.
[n] W. J. Corbett, “High Level Matlab Applications for SPEAR3”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper WEPL035, pp. 97-99.
[n] M. A. Martens, J. Annala, P. Bauer, V. D. Shiltsev, and G. Velev, “Studies of the Chromaticity, Tune, and Coupling Drift in the Tevatron”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MOPA010, pp. 725-727.
[n] Q. G. Zhou and M. Zhang, “An APPLE-II Type Helical Undulator for SSRF”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THPMA062, pp. 714-716.
[n] E. M?®tral, G. Arduini, F. Arnold Malandain, W. H?Âfle, and D. Manglunki, “Controlled Transverse Emittance Blow-Up in the CERN SPS”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6PFP073, pp. 3871-3873.
[n] C. Piel et al., “Commissioning of the Australian Synchrotron Injector RF Systems”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS012, pp. 3293-3295.
[n] D. Carbajo Perez et al., “Operational Feedback and Analysis of Current and Future Designs of the Injection Protection Absorbers in the Large Hadron Collider at CERN”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3517-3520. doi:10.18429/JACoW-IPAC2017-WEPVA108
[n] M. V. Zdorovets, V. V. Alexandrenko, I. A. Ivanov, M. V. Koloberdin, and Y. K. Sambayev, “Accelerator Complex Based on DC-60 Cyclotron”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper THCA01, pp. 287-289.
[n] A. V. Zlobin, V. V. Kashikhin, and I. Novitski, “Large-Aperture High-Field Nb3Sn Dipole Magnets”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2738-2741. doi:10.18429/JACoW-IPAC2018-WEPML026
[n] G. Velev et al., “Measurements of Sextupole Decay and Snapback in Tevatron Dipole Magnets”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPKF075, pp. 1780-1782.
For LaTeX
Use Complete Form
For BibTeX
References
- B. S. Lee et al., “Development of Interface and Diagnostic System for ECR ion source At KBSI”, in Proc. 21st Int. Workshop on ECR Ion Sources (ECRIS'14), Nizhny Novgorod, Russia, Aug. 2014, paper MOPPH011, pp. 61-63.
- A. A. Bortsova, H. G. Khodzhibagiyan, and D. Nikiforov, “Thermodynamic Characteristics of the Superconducting Quadrupole Magnets of the NICA Booster Synchrotron”, in Proc. 27th Russian Particle Accelerator Conference (RuPAC2021), Alushta, Crimea, Sep.-Oct. 2021, pp. 162-164.
- G. Torrisi et al., “Low Power RF Test of a Quadrupole-free X-Band Mode Launcher for High Brightness Applications”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2856-2859.
- O. O. Andreassen et al., “Turn-key Applications for Accelerators with LabVIEW-RADE”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEMAU007, pp. 670-672.
- E. Syresin et al., “Design of a Novel Tubular Electron String Ion Source (TESIS)”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPC141, pp. 403-405.
- J. Hormes, “Wednesday Welcome by Josef Hormes”, in Proc. 8th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'10), Saskatoon, Canada, Oct. 2010, paper WETA01, pp. XX-XX.
- G. J. Rosaz et al., “Development of Nb3Sn Coatings by Magnetron Sputtering for SRF Cavities”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper TUPB051, pp. 691-694.
- A. Blednykh and S. Krinsky, “Preliminary Impedance Budget for the NSLS-II Storage Ring”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMS102, pp. 4321-4323.
- G. Burt et al., “Power Coupler for the ILC Crab Cavity”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMN079, pp. 2212-2214.
- R. Eichhorn et al., “Cornell's HOM Beamline Absorbers”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPWO059, pp. 2441-2443.
- J. Galambos et al., “SNS Linac Upgrade Plans for the Second Target Station”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP114, pp. 320-322.
- B. K. Popovic, L. Teofili, and C. Vollinger, “Impedance Analysis of New PS Internal Dump Design”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3083-3086.
- A. Sublet et al., “Preliminary Results of Nb Thin Film Coating for HIE-ISOLDE SRF Cavities Obtained by Magnetron Sputtering”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper TUP076, pp. 620-622.
- W. J. Corbett, “High Level Matlab Applications for SPEAR3”, in Proc. 8th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'10), Saskatoon, Canada, Oct. 2010, paper WEPL035, pp. 97-99.
- M. A. Martens, J. Annala, P. Bauer, V. D. Shiltsev, and G. Velev, “Studies of the Chromaticity, Tune, and Coupling Drift in the Tevatron”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MOPA010, pp. 725-727.
- Q. G. Zhou and M. Zhang, “An APPLE-II Type Helical Undulator for SSRF”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper THPMA062, pp. 714-716.
- E. M?®tral, G. Arduini, F. Arnold Malandain, W. H?Âfle, and D. Manglunki, “Controlled Transverse Emittance Blow-Up in the CERN SPS”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6PFP073, pp. 3871-3873.
- C. Piel et al., “Commissioning of the Australian Synchrotron Injector RF Systems”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPLS012, pp. 3293-3295.
- D. Carbajo Perez et al., “Operational Feedback and Analysis of Current and Future Designs of the Injection Protection Absorbers in the Large Hadron Collider at CERN”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3517-3520.
- M. V. Zdorovets, V. V. Alexandrenko, I. A. Ivanov, M. V. Koloberdin, and Y. K. Sambayev, “Accelerator Complex Based on DC-60 Cyclotron”, in Proc. 24th Russian Particle Accelerator Conf. (RuPAC'14), Obninsk, Russia, Oct. 2014, paper THCA01, pp. 287-289.
- A. V. Zlobin, V. V. Kashikhin, and I. Novitski, “Large-Aperture High-Field Nb3Sn Dipole Magnets”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2738-2741.
- G. Velev et al., “Measurements of Sextupole Decay and Snapback in Tevatron Dipole Magnets”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPKF075, pp. 1780-1782.
Back to search