JaCoW Logo

Reference Search

Warning
Some papers titles are all uppercase, you must correct this before using this reference.

The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	H. Huang et al., “First High Spin-Flip Efficiency for High Energy Polarized Protons”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 84-86. doi:10.18429/JACoW-IPAC2021-MOPAB014
[n]	Y. M. Nosochkov et al., “Dark Sector Experiments at LCLS-II (DASEL) Accelerator Design”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2008-2011. doi:10.18429/JACoW-IPAC2017-TUPIK121
[n]	E. A. Savin, S. V. Matsievskiy, N. P. Sobenin, and A. A. Zavadtsev, “Beam Dynamics Calculations in the Multi-Beam Generator Cavity”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper TUPSA09, pp. 54-56. 
[n]	S. M. Polozov and T. V. Bondarenko, “Beam Dynamics Simulation in Two Versions of New Photogun for FCC-ee Electron Injector Linac”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1326-1329. doi:10.18429/JACoW-IPAC2017-TUPAB011
[n]	M. Lee and S. Kleban, “SLC Beam Line Error Analysis Using a Model-Based Expert System”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 767-770. 
[n]	E. L. Saldin, E. A. Schneidmiller, and M. V. Yurkov, “Design Formulas for VUV and X-Ray FELs”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper MOPOS15, pp. XX-XX. 
[n]	A. Ravichandran and B. Mustapha, “Machine-learning-assisted rapid beam energy change at the ATLAS heavy ion linac”, in Proc. HIAT'25, East Lansing, MI, USA, Jun. 2025, pp. 248-250. doi:10.18429/JACoW-HIAT2025-WEP10
[n]	E. L. Saldin, E. A. Schneidmiller, and M. V. Yurkov, “Sub-Terawatt Mode of Operation of X-ray SASE FEL”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper MOPOS14, pp. XX-XX. 
[n]	R. M. Thurman-Keup, C. E. Lundberg, D. Slimmer, and J. R. Zagel, “A Study of the Gain of Microchannel Plates in the Ionization Profile Monitors at Fermilab”, in Proc. IBIC'23, Saskatoon, Canada, Sep. 2023, pp. 405-409. doi:10.18429/JACoW-IBIC2023-WEP025
[n]	A. V. Otboev et al., “Feasibility Study of the Erlangen Synchrotron Light Source”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPLE012, pp. 724-726. 
[n]	A. M. Fadeev, V. N. Belyaev, S. M. Polozov, and E. A. Perelstein, “Cylindrical Phased Dipoles Array for Hyperthermia of Deep-Situated Tumors”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper WEPPC037, pp. 521-523. 
[n]	V. E. Akimov et al., “High-Power X-Ban Pulse Magnicon”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1000-1003. 
[n]	L. Feigin, A. Gover, and A. Nause, “Tapering enhanced superradiance - tapering rate optimization using analytical magnetic field maps”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 98-101. doi:10.18429/JACoW-IPAC2025-MOPB015
[n]	E. A. Savin, S. V. Matsievskiy, N. P. Sobenin, and A. A. Zavadtsev, “Multi-beam Generator Cavity for the Proton Linear Accelerator Feeding System on 991 MHz Frequency Geometry Optimization”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper WEPSB08, pp. 171-173. 
[n]	J. M. De Conto, “GENEPI: A High Intensity Deuteron Accelerator for Pulsed Neutron Production”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP08F, pp. 685-687. 
[n]	M. V. Lalayan, A. A. Kalashnikova, and S. E. Toporkov, “H-Cavity Based Accelerating Structure for Proton Accelerator”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper WEPPC010, pp. 464-465. 
[n]	D. Di Croce, M. Giovannozzi, T. Pieloni, M. Seidel, and F. Van der Veken, “Accelerating dynamic aperture evaluation using deep neural networks”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2870-2873. doi:10.18429/JACoW-IPAC2023-WEPA097
[n]	M. P. Kelly et al., “Microphonics in the ATLAS Upgrade Cryomodule”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper TUPPO031, pp. 269-272. 
[n]	M. V. Lalayan, V. A. Makarov, N. P. Sobenin, V. I. Shvedunov, A. A. Krasnov, and A. A. Zavadtsev, “POWER  COUPLER FIELD ASYMMETRY INFLUENCE ON PARTICLE BEAMS DYNAMICS IN ACCELERATORS WITH SUPERCONDUCTING CAVITIES”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper MOAPH06, pp. XX-XX. 
[n]	V. S. Dyubkov, “Room Temperature Folding Segment for a Transfer of Multiple Charge States Uranium Ions  Between Sections of Linac-100”, in Proc. RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, pp. 153-155. doi:10.18429/JACoW-RuPAC2021-MOPSA11
[n]	P. Plutecki, B. Bielawski, and A. C. Butterworth, “Code Generation Tools and Editor for Memory Maps”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 494. doi:10.18429/JACoW-ICALEPCS2019-MOPHA115
[n]	C. D. Johnson, “Antiproton Yield Optimization in the CERN Antiproton Accumulator”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2821-2824. 
[n]	K. W. Shepard, Z. A. Conway, J. D. Fuerst, M. Kedzie, and M. P. Kelly, “Prototype Superconducting Triple-Spoke Cavity for Beta = 0.63”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPT099, pp. 4338-4340. 
[n]	J. D. Fuerst, K. W. Shepard, M. P. Kelly, S. M. Gerbick, Z. A. Conway, and G. P. Zinkann, “Progress on Cavity Fabrication for the ATLAS Energy Upgrade”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper TUP75, pp. XX-XX. 
[n]	C. D. Johnson, S. Maury, T. R. Sherwood, and A. H. Sullivan, “Injection into the New CERN Antiproton Collector Ring”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3000-3003. 
[n]	A. V. Savilov, I. V. Bandurkin, S. V. Kuzikov, and A. A. Vikharev, “Flying RF Undulator”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper TUP040, pp. 474-477. 
[n]	L. Rybarcyk, K. F. Johnson, and B. Blind, “Transport of LANSCE-Linac Beam to Proposed Materials Test Station”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper MOP055, pp. 171-173. 
[n]	M. Dehler and D. Bulfone, “Orbit Feedbacks for Synchrotron Light Sources”, in Proc. DIPAC'01, Grenoble, France, May 2001, paper DS01, pp. XX-XX. 
[n]	F. Zhou et al., “Recent Understanding and Improvements of the LCLS Injector”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 592-596. doi:10.18429/JACoW-FEL2015-WEP003
[n]	R. Ischebeck et al., “Overview of Beam Instrumentation Activities for SwissFEL”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper MOPF31, pp. 119-123. 
[n]	F. J. Sacherer and T. R. Sherwood, “The Effect of Space Charge in Beam Transport Lines”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 1066-1068. 
[n]	A. Shalnov, B.Yu. Bogdanovich, A. Ignatyev, and V. Senyukov, “Application of Accelerated Electron Beams for Rubber and Polymer Modification”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAB13, pp. 125-127. 
[n]	S. Nakamura, T. Adachi, T. Oki, and N. Tokuda, “SuperKEKB Main Ring Power Supply System”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3531-3533. doi:10.18429/JACoW-IPAC2016-THPMW001
[n]	R. M. Ronningen, T. Baumann, and M. A. Kostin, “Materials under Irradiation by Heavy Ions and Perspectives for FRIB”, in Proc. HB'10, Morschach, Switzerland, Sep.-Oct. 2010, paper THO2C03, pp. 662-666. 
[n]	E. A. Savin and A. A. Zavadtsev, “Beam Dynamics Calculation in the Induction Linear Accelerator”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper TUPSA06, pp. 48-50. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search