JaCoW Logo

Reference Search

Warning
Please note that we have recently received feedback indicated that atleast one of these reference may have a problem.

Some papers titles are all uppercase, you must correct this before using this reference.

The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	V. L. Uvarov et al., “Producing Two-photon Planar Sources at an Electron Accelerator”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2192-2194. doi:10.18429/JACoW-IPAC2014-WEPRO098
[n]	C. M. Bhat and F. Zimmermann, “LHC Luminosity Upgrade with Large Piwinski Angle Scheme: A Recent Look”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPZ032, pp. 1879-1881. 
[n]	P. Desire Valdor, A. Gerbershagen, and A. Latina, “Intrabeam scattering simulation with a novel hybrid-kinetic Monte Carlo method for linear accelerators”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 659-662. doi:10.18429/JACoW-LINAC2024-THPB014
[n]	P. Walstrom and E. G. Cook, “A 50 kV Solid State Multipulse Kicker Modulator”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper ROAC004, pp. 544-546. 
[n]	V. L. Uvarov, A. N. Dovbnya, V. I. Nikiforov, and Z. V. Zhiglo, “Optimization of Electron Linac Operating Conditions for Photonuclear Isotope Production”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC106, pp. 1308-1310. 
[n]	D. Sertore, J. H. Han, P. Michelato, L. Monaco, C. Pagani, and S. Schreiber, “High QE Photocathode at FLASH”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPLS052, pp. 2496-2498. 
[n]	J. Steimel et al., “Development and Operation of PIP-II Injector Test, SSR1 Cryomodule, 325 MHz Amplifiers”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 245. doi:10.18429/JACoW-SRF2021-MOPTEV017
[n]	A. Schnase, F. J. Etzkorn, and H. Meuth, “An RF-Synthesizer for Fundamental and Precisely Adjusted Higher Harmonics”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1963-1966. 
[n]	V. V. Mytrochenko, M. I. Ayzatskiy, V. A. Kushnir, A. Opanasenko, S. A. Perezhogin, and V. L. Uvarov, “Intra-Bunch Energy Spread of Electrons in Powerful RF Linacs for Nuclear Physics Research”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPS040, pp. 691-693. 
[n]	L. E. Boon, A. F. Garfinkel, and K. C. Harkay, “Heat Load for the APS Superconducting Undulator”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC186, pp. 3332-3334. 
[n]	H. H. Li et al., “The Injection System of the SSRF Storage Ring”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC041, pp. 2076-2078. 
[n]	Y.-J. Chen and A. Paul, “Compact Proton Accelerator for Cancer Therapy”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAS059, pp. 1787-1789. 
[n]	R. L. Cassel et al., “The Prototype Solid State Induction Modulator for SLAC NLC”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH033, pp. 3744-3746. 
[n]	A. Hofmann, K. Hubner, and B. Zotter, “A Computer Code for the Calculation of Beam Stability in Circular Electron Machines”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3514-3517. 
[n]	S. Busold et al., “The LIGHT Beamline at GSI: Shaping Intense MeV Proton Bunches from a Compact Laser-driven Source”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1419-1421. doi:10.18429/JACoW-IPAC2014-TUPME030
[n]	F. M. Velotti et al., “Demonstration of Loss Reduction Using a Thin Bent Crystal to Shadow an Electrostatic Septum During Resonant Slow Extraction”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3399-3403. doi:10.18429/JACoW-IPAC2019-THXXPLM2
[n]	S. M. Martin and R. D. Hay, “Estimations of Magnetic Field Distributions in Three Dimensions Using a Two Dimensional Computer Program Trimm”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 907-909. 
[n]	R. Bachimanchi et al., “CEBAF SRF Performance during Initial 12 GeV Commissioning”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3638-3642. doi:10.18429/JACoW-IPAC2015-THXB1
[n]	G. Patel, D. E. Anderson, D. J. Solley, and M. Wezensky, “Droop Compensation for the High Voltage Converter Modulators at the Spallation Neutron Source”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPD081, pp. 3704-3706. 
[n]	M. Lieuvin and A. R. A. Staff, “S.A.R.A. -- A Low Cost Heavy Ion Accelerator for 10 to 40 MeV/A”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2072-2077. 
[n]	D. Gudkov, S. Lebet, G. Riddone, F. Rossi, and A. Samoshkin, “Experience on Fabrication and Assembly of the First Clic Two-Beam Module Prototype”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPFI055, pp. 2815-2817. 
[n]	W. Bertram et al., “Vacuum Processing and Control on COSY Beam Lines”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1573-1576. 
[n]	M. Pont, E. Boter, and M. L. Lopes, “Magnets for the Storage Ring ALBA”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPLS080, pp. 2562-2564. 
[n]	C. Yao, V. Sajaev, N. Sereno, and H. Shang, “Optimization of the Low-emittance Lattice of the APS Booster Synchrotron”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPP057, pp. 690-692. 
[n]	H. Li et al., “The Status of CSNS Front End”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 771-773. doi:10.18429/JACoW-LINAC2018-THPO039
[n]	S. Posen et al., “Flux Expulsion Variation in SRF Cavities”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper MOPB104, pp. 404-408. 
[n]	K. McDonald, “Beam Dynamics of a Laser-Driven RF Electron Gun”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper TH2-04, pp. 519-519. 
[n]	Q. Ji, D. P. Grote, A. R. Lambert, D. Li, T. Schenkel, and J. W. Staples, “Beam Dynamics Studies of H- Beam Chopping in a LEBT for Project X”, in Proc. HB'12, Beijing, China, Sep. 2012, paper THO3B04, pp. 546-549. 
[n]	V. L. Uvarov et al., “Two-channel Mode of Mo-99 Production at an Electron Accelerator”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPS083, pp. 3627-3629. 
[n]	C. M. Baffes, M. D. Church, J. R. Leibfritz, S. A. Oplt, and I. L. Rakhno, “Mechanical Design of a High Energy Beam Absorber for the Advanced Superconducting Test Accelerator (ASTA) at Fermilab”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPD034, pp. 2582-2584. 
[n]	B. Puccio, A. Casta??eda, M. Kwiatkowski, I. Romera, and B. Todd, “The CERN Beam Interlock System: Principle and Operational Experience”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEB073, pp. 2866-2868. 
[n]	M. Roth et al., “Breaking the 70 MeV Proton Energy Threshold in Laser Proton Acceleration and Guiding Beams to Applications”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1886-1889. doi:10.18429/JACoW-IPAC2014-WEXB01
[n]	R. S. Mao et al., “Detectors for Slowly Extracted Ions in HIRFL-CSR”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper TUPB21, pp. 211-212. 
[n]	R. L. Lillestol, S. Doebert, M. Olvegaard, A. Rabiller, G. Sterbini, and E. Adli, “Experimental Verification of the CLIC Decelerator with theTest Beam Line in the CLIC Test Facility 3”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR031, pp. 1885-1887. 
[n]	B. R. Poole, D. T. Blackfield, and S. D. Nelson, “Particle Simulations of a Linear Proton Dielectric Wall Accelerator”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAS060, pp. 1790-1792. 
[n]	J. W. Angle, G. V. Eremeev, M. J. Kelley, U. Pudasaini, C. E. Reece, and J. Tuggle, “Crystallographic Characterization of Nb?Sn Coatings and N-Doped Niobium via EBSD and SIMS”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 871-875. doi:10.18429/JACoW-SRF2019-THP017
[n]	J. A. Watson et al., “A Solid-State Modulator for High Speed Kickers”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH031, pp. 3738-3740. 
[n]	D. T. Blackfield, Y.-J. Chen, J. R. Harris, S. D. Nelson, A. Paul, and B. R. Poole, “Injector Particle Simulation and Beam Transport in a Compact Linear Proton Accelerator”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAS057, pp. 1781-1783. 
[n]	G. K. Brunton et al., “Shot Rate Improvement Strive for the National Ignition Facility (NIF)”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 56-59. doi:10.18429/JACoW-ICALEPCS2015-MOD3O03
[n]	B. Biswas, S. Krishnagopal, A. Kumar, S. Lal, and K. K. Pant, “Thermal Simulations of a Photocathode R.F. Gun”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper WEPMA112, pp. 482-484. 
[n]	M. Olvegaard, T. J. C. Ekel?Âf, J. M. Y. Ruber, V. G. Ziemann, and J.-P. Koutchouk, “On the Suitability of a Solenoid Horn for the ESS Neutrino Superbeam”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3873-3875. doi:10.18429/JACoW-IPAC2015-THPF081
[n]	E. I. Simakov et al., “Experimental Study of Wakefields in an X-band Photonic Band Gap Accelerating Structure”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2689-2691. doi:10.18429/JACoW-IPAC2015-WEPJE008
[n]	G. Shvets, N. J. Fisch, A. Pukhov, and J. Meyer-ter-Vehn, “Generation of Phase-Controlled Accelerating Structures in Plasma”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA126, pp. 3675-3677. 
[n]	L. Leduc, G. Corti, and R. Veness, “Design of a Highly Optimised Vacuum Chamber Support for the LHCb Experiment”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPS025, pp. 1581-1583. 
[n]	K. X. Gu, X. Chen, T. M. Huang, Q. Ma, and W. M. Pan, “Design and Simulation of High Power Input Coupler for C-ADS Linac 5-Cell Elliptical Cavities”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper THPB087, pp. 1343-1345. 
[n]	J. Staples, S. M. Lidia, R. A. Rimmer, and S. Virostek, “The LBNL Femtosource 10 kHz Photoinjector”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAB023, pp. 2092-2094. 
[n]	J. Dolique, “Wakefield Driven by the Strongly Accelerated Beam of an RF Photoinjector”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1306-1309. 
[n]	R. C. Davidson, H. Qin, and G. Shvets, “Instability Driven by Wall Impedance in Intense Charged Particle Beams”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPPB051, pp. 3117-3119. 
[n]	G. Chen et al., “Research and Development of RF System for SC200 Cyclotron”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3616-3618. doi:10.18429/JACoW-IPAC2018-THPAL004
[n]	G. Marcus et al., “Regenerative Amplification for a Hard X-Ray Free-Electron Laser”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 118-121. doi:10.18429/JACoW-FEL2019-TUP032
[n]	P. Di Marcantonio, R. Cirami, I. Coretti, G. Chiozzi, and M. Kiekebusch, “Evaluation of Software and Electronics Technologies for the Control of the E-ELT Instruments: a Case Study”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPKS025, pp. 844-847. 
[n]	C. Hovater et al., “Operational Experience With CW High Gradient and High QL Cryomodules”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper THIOC03, pp. 834-838. 
[n]	C. Johnstone et al., “A Proposed 100-400 MeV Beam Facility at Fermilab”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAG06, pp. 86-88. 
[n]	Z. Wang et al., “Progress on Coupled RFQ-SFRFQ Accelerator for Materials Irradiation Research”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPC013, pp. 3302-3304. 
[n]	X. W. Wu, H. B. Chen, L. Zhang, N. Catalan-Lasheras, B. J. Woolley, and W. Wuensch, “Calorimetric Power Measurements in X-band High Power RF”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2967-2969. doi:10.18429/JACoW-IPAC2015-WEPMN019
[n]	M. Yamamoto et al., “Longitudinal Particle Simulation for J-PARC RCS”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5PFP028, pp. 3254-3256. 
[n]	Y. Bao, C. Blume, A. Caldwell, and D. Greenwald, “Frictional Cooling Demonstration at MPP”, in Proc. COOL'09, Lanzhou, China, Aug.-Sep. 2009, paper TUM1MCCO03, pp. 55-58. 
[n]	Y. W. An et al., “The Operation Status of CSNS Front End”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2024-2026. doi:10.18429/JACoW-IPAC2019-TUPTS038
[n]	M. Znidarcic and M. Cargnelutti, “Compact Beam Position Monitor for Electron and Proton Machines”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 161-164. doi:10.18429/JACoW-LINAC2016-MOPLR012
[n]	L. Tkachenko et al., “Dipole with Coil Based on High Temperature Superconductor”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH309, pp. 3624-3626. 
[n]	T. Winkelmann, R. Cee, Th. Haberer, B. Naas, A. Peters, and S. Scheloske, “Experience at the Ion Beam Therapy Center (HIT) with 2 Years of Continuous ECR Ion Source Operation”, in Proc. ECRIS'08, Chicago, IL, USA, Sep. 2008, paper MOPO-10, pp. 86-88. 
[n]	C. Steier et al., “Status of the Low Emittance Upgrade of the Advanced Light Source”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEA070, pp. 2645-2647. 
[n]	C. M. Bhat, “A New Beam Injection Scheme for the Fermilab Booster”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3976-3978. doi:10.18429/JACoW-IPAC2015-THPF112
[n]	V. V. Mytrochenko et al., “Performance of Compact Electron Injector on Evanescent Oscillations”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP100, pp. 790-792. 
[n]	T. Kobilarcik, J. DeVoy, and C. Moore, “Automatic Beamline Correction”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAG020, pp. 2934-2935. 
[n]	L. Monaco, P. Michelato, C. Pagani, and N. Panzeri, “Experimental and Theoretical Analysis of the Tesla-like SRF Cavity Flanges”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH170, pp. 463-465. 
[n]	Y.-J. Chen, D. T. Blackfield, S. D. Nelson, and B. R. Poole, “Beam Transport in a Dielectric Wall Accelerator for Intensity Modulated Proton Therapy”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC043, pp. 2106-2108. 
[n]	S. Lal et al., “Development and Commissioning of the CUTE-FEL Injector”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEC005, pp. 1716-1718. 
[n]	S. Karabekyan, S. Abeghyan, J. Pflueger, and M. Yakopov, “Experience Gained during the Commissioning of the Undulator Control System at the European XFEL”, in Proc. PCaPAC'16, Campinas, Brazil, Oct. 2016, pp. 148-150. doi:10.18429/JACoW-PCAPAC2016-FRITPLCO04
[n]	T. Houck, M. Garcia, and S. Sampayan, “Faraday Cup Measurements of the Plasma Plume Produced at an X-ray Converter”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper MO4102, pp. 311-313. 
[n]	S. Pei, X. Li, H. F. Ouyang, and J. R. Zhang, “325 MHz CW Room Temperature High Power Bunching Cavity for the China ADS MEBT1”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper THPB025, pp. 903-905. 
[n]	R. Joshel, S. Childress, C. Crawford, W. Kissel, and S. Lackey, “Automated Beam Position and Split Control for the Fermilab Switchyard”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 515-516. 
[n]	L. Zhang et al., “An X-Band Linac with Tunable Beam Energy”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1644-1646. doi:10.18429/JACoW-IPAC2015-TUPJE014
[n]	Y. J. Yuan et al., “Present Status of HIRFL Complex in Lanzhou”, in Proc. HIAT'18, Lanzhou, China, Oct. 2018, pp. 18-22. doi:10.18429/JACoW-HIAT2018-MOZBA01
[n]	U. Pudasaini, J. W. Angle, G. V. Eremeev, M. J. Kelley, C. E. Reece, and J. Tuggle, “Nb?Sn Films for SRF Cavities: Genesis and RF Properties”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 810-817. doi:10.18429/JACoW-SRF2019-THFUA6
[n]	L. Zhang, “Solid Pulse Transforming Line for DWA”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPZ004, pp. 2769-2771. 
[n]	P. Shcherbakov et al., “MINIMIZATION OF CABLE LOSSES IN FAST-CYCLING DIPOLE FOR THE SIS300 RING”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper THFP05, pp. XX-XX. 
[n]	M. Pari, M. A. Fraser, B. Goddard, V. Kain, L. S. Stoel, and F. M. Velotti, “Model and Measurements of CERN-SPS Slow Extraction Spill Re-Shaping - the Burst Mode Slow Extraction”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2406-2409. doi:10.18429/JACoW-IPAC2019-WEPMP035
[n]	D. Sertore, D. Favia, P. Michelato, L. Monaco, and P. Pierini, “Cesium Telluride and Metals Photoelectron Thermal Emittance Measurements Using a Time-of-flight Spectrometer”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPKF045, pp. 408-410. 
[n]	D. Gonnella et al., “Industrial Cavity Production: Lessons Learned to Push the Boundaries of Nitrogen-Doping”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 1199-1205. doi:10.18429/JACoW-SRF2019-FRCAA3
[n]	S. Valeri et al., “Spectroscopic Investigation of in situ Prepared Mulialkali-Based Photocathodesvaleri”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1459-1462. 
[n]	D. Angal-Kalinin et al., “Status of CLARA Front End Commissioning”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 98-101. doi:10.18429/JACoW-LINAC2018-MOPO035
[n]	P. Shcherbakov et al., “COMPARATIVE ANALYSIS OF WIDE APERTURE DIPOLE DESIGNS FOR THE SIS300 RING”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper THFP04, pp. XX-XX. 
[n]	P. Barbier et al., “RF System Develpments for High Current Accumulation in the ESRF Storage Ring”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1859-1862. 
[n]	P. Michelato, C. Pagani, D. Sertore, and S. Valeri, “Multialkali Thin Photocathodes for High Brightness Guns”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1456-1459. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search