Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] C. Wiesner et al., “Chopping High Intensity Proton Beams Using a Pulsed Wien Filter”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPP074, pp. 3907-3909.
[n] T. F. Lin et al., “The Control System for the Purification Station at NSRRC”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPME039, pp. 3597-3599.
[n] J. A. Maloney et al., “Studies of the Twin Helix Parametric-resonance Ionization Cooling Channel with COSY INFINITY”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPD011, pp. 1428-1430.
[n] O. K. Kester et al., “The MSU/NSCL Re-Accelerator ReA3”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper MOOCAU05, pp. 57-61.
[n] S. Shchelkunov, S. Kazakov, V. Yakovlev, A. Kanareykin, E. Nenasheva, and J. Hirshfield, “Fast Ferroelectric Phase Shifter Design for ERLs”, in Proc. ERL'09, Ithaca, NY, USA, Jun. 2009, paper WG317, pp. 67-71.
[n] Y. Eidelman and V. Yakimenko, “The Spin Motion Calculation Using Lie Method in Collider Nonlinear Magnetic Field”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 269-272.
[n] V. S. Morozov, Y. S. Derbenev, A. Afanasev, R. P. Johnson, B. Erdelyi, and J. A. Maloney, “Parametric-Resonance Ionization Cooling in Twin-Helix”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPZ009, pp. 2784-2786.
[n] P. Oddo et al., “RHIC Spin Flipper AC Dipole Controller”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP203, pp. 474-476.
[n] E. McCrory, “Longitudinal Emittance from the 400 MeV Fermilab Linac”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper TUP06, pp. 332-334.
[n] W. Kutschera, “Accelerator Mass Spectrometry at VERA”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEYF101, pp. 245-252.
[n] J. D. Kunz, M. Berz, K. Makino, and P. Snopok, “The Advancement of Cooling Absorbers in COSY Infinity”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2655-2657. doi:10.18429/JACoW-IPAC2015-WEPWA066
[n] Y. Senichev, R. Maier, D. Zyuzin, and M. Berz, “Alternating Spin Aberration Electrostatic Lattice for EDM Ring”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPC070, pp. 1332-1334.
[n] G. L. Nicholls and G. A. Voss, “A 475.76 MHz Linac Chopper”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 836-842.
[n] J. D. Kunz, M. Berz, K. Makino, and P. Snopok, “Hybrid Methods for Simulation of Muon Ionization Cooling Channels”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1568-1570. doi:10.18429/JACoW-IPAC2016-TUPMY012
[n] J. Zhou, J. C. McNeur, G. Travish, and R. B. Yoder, “Fabrication of a Prototype Micro-Accelerator Platform”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP086, pp. 259-261.
[n] M. Wiseman, C. K. Sinclair, R. Whitney, M. Zarecky, and R. Vetterlein, “High Power Electron Beam Dumps at CEBAF”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P066, pp. 3761-3763.
[n] N. Solyak et al., “Development of X-Band Accelerating Structures at Fermilab”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAB013, pp. 1210-1212.
[n] W. H?Âfle, P. Baudrenghien, G. Kotzian, and V. Rossi, “Digital Signal Processing for the Multi-bunch LHC Transverse Feedback System”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC122, pp. 3269-3271.
[n] J. Haimson and B. Mecklenburg, “Design and Operating Characteristics of a CW Non-Synchronous Traveling Wave Structure for a 900 MeV Pulse Stretcher Ring”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper MO4-36, pp. 142-144.
[n] W. Liu and W. Gai, “Update on ILC Positron Source Start-to-End Simulation”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR041, pp. 1909-1911.
[n] T. Weiland, N. Holtkamp, P. Schuett, and R. Wanzenberg, “The Resonant Wake Field Transformer (RWT) - Collider”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 31-34.
[n] A. I. Wawrzyniak et al., “Solaris Storage Ring Commissioning”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2895-2897. doi:10.18429/JACoW-IPAC2016-WEPOW029
[n] T. J. Roberts, R. J. Abrams, M. A. Cummings, and Y. Bao, “MuSim, a Graphical User Interface for Multiple Simulation Programs”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3880-3882. doi:10.18429/JACoW-IPAC2017-THPAB074
[n] D. J. Nicklaus et al., “An Erlang-Based Front End Framework for Accelerator Controls”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper THDAUST02, pp. 1264-1266.
[n] J. K. Sekutowicz, W. C. Grabowski, R. Nietubyc, and T. Wasiewicz, “Shape Optimization of a SRF Injector Cavity”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWO007, pp. 2322-2324.
[n] Y. M. Chang et al., “Test Results of SRRC Pulsed Magnets for 1.5 GeV Injection”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP114G, pp. 2474-2476.
[n] A. V. Aleksandrov et al., “Status of New 2.5 MeV Test Facility at SNS”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper THPP108, pp. 1105-1107.
[n] J. N. Li and A. Mitra, “A 35 MHz Re-Buncher RF Cavity for ISAC at TRIUMF”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP18F, pp. 1790-1792.
[n] A. I. Drozhdin, O. E. Krivosheev, and N. V. Mokhov, “Beam Loss and Collimation in the Fermilab 16 GeV Proton Driver”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH054, pp. 2572-2574.
[n] H. Bluem et al., “Electron Gun and Injector Designs for State-of-the-Art FELs”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper MOPP054, pp. XX-XX.
[n] M. Alabau, P. Bambade, A. Faus-Golfe, A. Latina, and D. Schulte, “Comparison of ILC Fast Beam-Beam Feedback Performance in the e-e- and e+e- Modes of Operation”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN056, pp. 2832-2834.
[n] C. S. Chen et al., “Performance of the New White Circuit in Upgraded 1.5 GeV Booster Synchrotron”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP1B18, pp. 1829-1831.
[n] A. Y. Murokh et al., “Inverse Compton Scattering Experiment in a Bunch Train Regime Using Nonlinear Optical Cavity”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THEPPB008, pp. 3245-3247.
[n] C. Wermelskirchen et al., “The SSRL Injector Control System”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1383-1386.
[n] E. McCrory, “Emittance Measurement Techniques Used in the 1 MeV RFQ for the PET Isotope Linac at Fermilab”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper TUP07, pp. 335-337.
[n] G. A. Voss, “A Personal Perspective of High Energy Accelerators”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FPD01, pp. 27-29.
[n] J. Chen, K. T. Hsu, K. K. Lin, and T. S. Ueng, “Tune Measurement of SRRC Booster during Ramping”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP2B06, pp. 645-647.
[n] B. Yan, “Post-linac beam collimation study at the beam distribution section of SHINE”, presented at the IPAC'23, Venice, Italy, May 2023, paper WEPL064, unpublished.
[n] S. Hirata and S. Sasaki, “Theoretical Examination of Radiation Spectrum from the Quasi-periodic Undulator”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPD025, pp. 3144-3146.
[n] B. T. Loseth, M. Berz, K. Makino, P. Snopok, and H. Zhang, “Space Charge Simulation in COSY using The Fast Multipole Method”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 460-462. doi:10.18429/JACoW-IPAC2014-MOPME038
[n] I. Rutkowski et al., “Improved Vector Modulator Card for MTCA-based LLRF Control System for Linear Accelerators”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPEA030, pp. 3207-3209.
[n] M. K. Grecki et al., “On-Line RF Amplitude and Phase Calibration”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3957-3959. doi:10.18429/JACoW-IPAC2017-THPAB103
[n] M. Schedler, F. Frommberger, N. Heurich, W. Hillert, A. Roth, and R. Zimmermann, “First Measurements with Multibunch Feedback Systems at the Fast Ramping Stretcher Ring ELSA”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPP059, pp. 2840-2842.
[n] N. V. Mokhov, A. I. Drozhdin, and O. E. Krivosheev, “Radiation Shielding of the Fermilab 16 GeV Proton Driver”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH056, pp. 2578-2580.
[n] R. Benaroya, T. K. Khoe, and W. J. Ramler, “Superconducting Plates as Magnetic Shields”, in Proc. Cyclotrons'66, Gatlinburg, TN, USA, Aug. 1966, paper B-010, pp. XX-XX.
[n] A. M. Marendziak et al., “Performance of the Vacuum System for the Solaris 1.5 GeV Electron Storage Ring”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2898-2901. doi:10.18429/JACoW-IPAC2016-WEPOW031
[n] J. Sebek, R. Hettel, R. Matheson, R. Ortiz, and J. Wachter, “SSRL Beam Position Monitor Detection Electronics”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1554-1557.
[n] F. Liu, I. Brown, L. Phillips, G. Biallas, and T. Siggins, “A Method of Producing Surface Conduction on Ceramic Accelerator Components Using Metal Ion Implantation”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P064, pp. 3752-3754.
[n] J. J. Wiechecki et al., “Impact of the DBA Blocks Alignment on the Beam Dynamics of the Storage Ring in Solaris”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2902-2904. doi:10.18429/JACoW-IPAC2016-WEPOW032
[n] A. Kisiel et al., “BPM Based Optics Correction of the Solaris 1.5 GeV Storage Ring”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 836-839. doi:10.18429/JACoW-IBIC2016-WEPG78
[n] G. A. Voss, “Report on DORIS”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1363-1366.
[n] M. Kanazawa et al., “Present Status of HIMAC at NIRS”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRBL3, pp. 600-602.
[n] J. S. Schmidt et al., “Functional Integration of the RFQ in the ESS Systems”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 890-893. doi:10.18429/JACoW-IPAC2018-TUPAF068
[n] J. K. Sekutowicz et al., “Feasibility of CW and LP Operation of the XFEL Linac”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper TUOCNO04, pp. 189-192.
[n] A. I. Wawrzyniak et al., “Performance of SOLARIS Storage Ring”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2490-2494. doi:10.18429/JACoW-IPAC2017-WEOCA1
[n] H. Saito et al., “Study on Generation of Variable Polarized Coherent THz Radiation Using a Crossed Undulator”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 157-159. doi:10.18429/JACoW-LINAC2018-MOPO076
[n] R. Hettel, D. Mostowfi, R. Ortiz, and J. Sebek, “Triggers and Timing System for the SSRL 3 GeV Injector”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1478-1481.
[n] G. A. Voss, “The 19 GeV e -- e- Storage Ring PETRA”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 2970-2974.
[n] F. Toral et al., “Manufacturing and Testing of a TBL PETS Prototype”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEA041, pp. 3768-3770.
[n] T. Takahashi, M. Izawa, S. Sakanaka, and K. Umemori, “Renewal of Klystron Power Supply for the Photon Factory Storage Ring at KEK”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP087, pp. 1035-1037.
[n] U. Mavric et al., “Commissioning of the Low-Noise MTCA.4-based Local Oscillator and Clock Generation Module”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 847-849. doi:10.18429/JACoW-IPAC2015-MOPHA030
[n] J. Branlard et al., “European XFEL RF Gun Commissioning and LLRF Linac Installation”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2427-2429. doi:10.18429/JACoW-IPAC2014-WEPME065
[n] H. Schlarb et al., “Bunch-to-Bunch Energy Stability Test of the Nb Prototypes of the TESLA Superstructure”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAB005, pp. 2730-2732.
[n] S. Morioka, S. Ninomiya, H. Saito, Y. Sasaki, K. Sato, and T. Zhang, “An Improved Method for the Dipole and Quadrupole Magnet Design”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP4B10, pp. 2119-2121.
[n] J. C. Lee, T. S. Ueng, and M. H. Wang, “Phenomenon of Chromaticity Effects on the Transverse Instabilities in the SRRC Storage Ring”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP2B05, pp. 1142-1144.
[n] R. Zeng and A. J. Johansson, “Design Considerations for Phase Reference Distribution System at ESS”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPFI042, pp. 3379-3381.
For LaTeX
Use Complete Form
For BibTeX
References
- C. Wiesner et al., “Chopping High Intensity Proton Beams Using a Pulsed Wien Filter”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPP074, pp. 3907-3909.
- T. F. Lin et al., “The Control System for the Purification Station at NSRRC”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPME039, pp. 3597-3599.
- J. A. Maloney et al., “Studies of the Twin Helix Parametric-resonance Ionization Cooling Channel with COSY INFINITY”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPD011, pp. 1428-1430.
- O. K. Kester et al., “The MSU/NSCL Re-Accelerator ReA3”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper MOOCAU05, pp. 57-61.
- S. Shchelkunov, S. Kazakov, V. Yakovlev, A. Kanareykin, E. Nenasheva, and J. Hirshfield, “Fast Ferroelectric Phase Shifter Design for ERLs”, in Proc. 45th ICFA Advanced Beam Dynamics Workshop on Energy Recovery LINAC Workshop (ERL'09), Ithaca, NY, USA, Jun. 2009, paper WG317, pp. 67-71.
- Y. Eidelman and V. Yakimenko, “The Spin Motion Calculation Using Lie Method in Collider Nonlinear Magnetic Field”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 269-272.
- V. S. Morozov, Y. S. Derbenev, A. Afanasev, R. P. Johnson, B. Erdelyi, and J. A. Maloney, “Parametric-Resonance Ionization Cooling in Twin-Helix”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPZ009, pp. 2784-2786.
- P. Oddo et al., “RHIC Spin Flipper AC Dipole Controller”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP203, pp. 474-476.
- E. McCrory, “Longitudinal Emittance from the 400 MeV Fermilab Linac”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper TUP06, pp. 332-334.
- W. Kutschera, “Accelerator Mass Spectrometry at VERA”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEYF101, pp. 245-252.
- J. D. Kunz, M. Berz, K. Makino, and P. Snopok, “The Advancement of Cooling Absorbers in COSY Infinity”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2655-2657.
- Y. Senichev, R. Maier, D. Zyuzin, and M. Berz, “Alternating Spin Aberration Electrostatic Lattice for EDM Ring”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPC070, pp. 1332-1334.
- G. L. Nicholls and G. A. Voss, “A 475.76 MHz Linac Chopper”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 836-842.
- J. D. Kunz, M. Berz, K. Makino, and P. Snopok, “Hybrid Methods for Simulation of Muon Ionization Cooling Channels”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1568-1570.
- J. Zhou, J. C. McNeur, G. Travish, and R. B. Yoder, “Fabrication of a Prototype Micro-Accelerator Platform”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP086, pp. 259-261.
- M. Wiseman, C. K. Sinclair, R. Whitney, M. Zarecky, and R. Vetterlein, “High Power Electron Beam Dumps at CEBAF”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9P066, pp. 3761-3763.
- N. Solyak et al., “Development of X-Band Accelerating Structures at Fermilab”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAB013, pp. 1210-1212.
- W. H?Âfle, P. Baudrenghien, G. Kotzian, and V. Rossi, “Digital Signal Processing for the Multi-bunch LHC Transverse Feedback System”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPC122, pp. 3269-3271.
- J. Haimson and B. Mecklenburg, “Design and Operating Characteristics of a CW Non-Synchronous Traveling Wave Structure for a 900 MeV Pulse Stretcher Ring”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper MO4-36, pp. 142-144.
- W. Liu and W. Gai, “Update on ILC Positron Source Start-to-End Simulation”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPR041, pp. 1909-1911.
- T. Weiland, N. Holtkamp, P. Schuett, and R. Wanzenberg, “The Resonant Wake Field Transformer (RWT) - Collider”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 31-34.
- A. I. Wawrzyniak et al., “Solaris Storage Ring Commissioning”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2895-2897.
- T. J. Roberts, R. J. Abrams, M. A. Cummings, and Y. Bao, “MuSim, a Graphical User Interface for Multiple Simulation Programs”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3880-3882.
- D. J. Nicklaus et al., “An Erlang-Based Front End Framework for Accelerator Controls”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper THDAUST02, pp. 1264-1266.
- J. K. Sekutowicz, W. C. Grabowski, R. Nietubyc, and T. Wasiewicz, “Shape Optimization of a SRF Injector Cavity”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPWO007, pp. 2322-2324.
- Y. M. Chang et al., “Test Results of SRRC Pulsed Magnets for 1.5 GeV Injection”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP114G, pp. 2474-2476.
- A. V. Aleksandrov et al., “Status of New 2.5 MeV Test Facility at SNS”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper THPP108, pp. 1105-1107.
- J. N. Li and A. Mitra, “A 35 MHz Re-Buncher RF Cavity for ISAC at TRIUMF”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP18F, pp. 1790-1792.
- A. I. Drozhdin, O. E. Krivosheev, and N. V. Mokhov, “Beam Loss and Collimation in the Fermilab 16 GeV Proton Driver”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPPH054, pp. 2572-2574.
- H. Bluem et al., “Electron Gun and Injector Designs for State-of-the-Art FELs”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper MOPP054, pp. XX-XX.
- M. Alabau, P. Bambade, A. Faus-Golfe, A. Latina, and D. Schulte, “Comparison of ILC Fast Beam-Beam Feedback Performance in the e-e- and e+e- Modes of Operation”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMN056, pp. 2832-2834.
- C. S. Chen et al., “Performance of the New White Circuit in Upgraded 1.5 GeV Booster Synchrotron”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP1B18, pp. 1829-1831.
- A. Y. Murokh et al., “Inverse Compton Scattering Experiment in a Bunch Train Regime Using Nonlinear Optical Cavity”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THEPPB008, pp. 3245-3247.
- C. Wermelskirchen et al., “The SSRL Injector Control System”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1383-1386.
- E. McCrory, “Emittance Measurement Techniques Used in the 1 MeV RFQ for the PET Isotope Linac at Fermilab”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper TUP07, pp. 335-337.
- G. A. Voss, “A Personal Perspective of High Energy Accelerators”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper FPD01, pp. 27-29.
- J. Chen, K. T. Hsu, K. K. Lin, and T. S. Ueng, “Tune Measurement of SRRC Booster during Ramping”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP2B06, pp. 645-647.
- B. Yan, “Post-linac beam collimation study at the beam distribution section of SHINE”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPL064, unpublished.
- S. Hirata and S. Sasaki, “Theoretical Examination of Radiation Spectrum from the Quasi-periodic Undulator”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPD025, pp. 3144-3146.
- B. T. Loseth, M. Berz, K. Makino, P. Snopok, and H. Zhang, “Space Charge Simulation in COSY using The Fast Multipole Method”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 460-462.
- I. Rutkowski et al., “Improved Vector Modulator Card for MTCA-based LLRF Control System for Linear Accelerators”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPEA030, pp. 3207-3209.
- M. K. Grecki et al., “On-Line RF Amplitude and Phase Calibration”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3957-3959.
- M. Schedler, F. Frommberger, N. Heurich, W. Hillert, A. Roth, and R. Zimmermann, “First Measurements with Multibunch Feedback Systems at the Fast Ramping Stretcher Ring ELSA”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPP059, pp. 2840-2842.
- N. V. Mokhov, A. I. Drozhdin, and O. E. Krivosheev, “Radiation Shielding of the Fermilab 16 GeV Proton Driver”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPPH056, pp. 2578-2580.
- R. Benaroya, T. K. Khoe, and W. J. Ramler, “Superconducting Plates as Magnetic Shields”, in Proc. Int. Conf. on Isochronous Cyclotrons (Cyclotrons'66), Gatlinburg, TN, USA, Aug. 1966, paper B-010, pp. XX-XX.
- A. M. Marendziak et al., “Performance of the Vacuum System for the Solaris 1.5 GeV Electron Storage Ring”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2898-2901.
- J. Sebek, R. Hettel, R. Matheson, R. Ortiz, and J. Wachter, “SSRL Beam Position Monitor Detection Electronics”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1554-1557.
- F. Liu, I. Brown, L. Phillips, G. Biallas, and T. Siggins, “A Method of Producing Surface Conduction on Ceramic Accelerator Components Using Metal Ion Implantation”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9P064, pp. 3752-3754.
- J. J. Wiechecki et al., “Impact of the DBA Blocks Alignment on the Beam Dynamics of the Storage Ring in Solaris”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2902-2904.
- A. Kisiel et al., “BPM Based Optics Correction of the Solaris 1.5 GeV Storage Ring”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 836-839.
- G. A. Voss, “Report on DORIS”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1363-1366.
- M. Kanazawa et al., “Present Status of HIMAC at NIRS”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRBL3, pp. 600-602.
- J. S. Schmidt et al., “Functional Integration of the RFQ in the ESS Systems”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 890-893.
- J. K. Sekutowicz et al., “Feasibility of CW and LP Operation of the XFEL Linac”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper TUOCNO04, pp. 189-192.
- A. I. Wawrzyniak et al., “Performance of SOLARIS Storage Ring”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2490-2494.
- H. Saito et al., “Study on Generation of Variable Polarized Coherent THz Radiation Using a Crossed Undulator”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 157-159.
- R. Hettel, D. Mostowfi, R. Ortiz, and J. Sebek, “Triggers and Timing System for the SSRL 3 GeV Injector”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1478-1481.
- G. A. Voss, “The 19 GeV e -- e- Storage Ring PETRA”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 2970-2974.
- F. Toral et al., “Manufacturing and Testing of a TBL PETS Prototype”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEA041, pp. 3768-3770.
- T. Takahashi, M. Izawa, S. Sakanaka, and K. Umemori, “Renewal of Klystron Power Supply for the Photon Factory Storage Ring at KEK”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5PFP087, pp. 1035-1037.
- U. Mavric et al., “Commissioning of the Low-Noise MTCA.4-based Local Oscillator and Clock Generation Module”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 847-849.
- J. Branlard et al., “European XFEL RF Gun Commissioning and LLRF Linac Installation”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2427-2429.
- H. Schlarb et al., “Bunch-to-Bunch Energy Stability Test of the Nb Prototypes of the TESLA Superstructure”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPAB005, pp. 2730-2732.
- S. Morioka, S. Ninomiya, H. Saito, Y. Sasaki, K. Sato, and T. Zhang, “An Improved Method for the Dipole and Quadrupole Magnet Design”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP4B10, pp. 2119-2121.
- J. C. Lee, T. S. Ueng, and M. H. Wang, “Phenomenon of Chromaticity Effects on the Transverse Instabilities in the SRRC Storage Ring”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP2B05, pp. 1142-1144.
- R. Zeng and A. J. Johansson, “Design Considerations for Phase Reference Distribution System at ESS”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPFI042, pp. 3379-3381.
Back to search