Favourites
For Word
[n] G. Valentino et al., “First Operational Experience with Embedded Collimator BPMs in the LHC”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2510-2513. doi:10.18429/JACoW-IPAC2016-WEPMW034
[n] H. Euteneuer and H. Sch?Âler, “Experiences in Fabricating and Testing the RF-Sections of the Mainz Microtron”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper TH3-29, pp. 508-511.
[n] J. R. Chen, C. K. Kuan, K. Y. Kuo, and D. J. Wang, “The Mechanical Stability of the Electron Beam Position Monitor at the Taiwan Light Source”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP4B16, pp. 2429-2431.
[n] C. R. Prokop, M. C. Lin, P. Piot, and P. Stoltz, “Start-to-end Simulation of a Compact THz Smith-Purcell FEL”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPD075, pp. 2093-2095.
[n] H. Kim et al., “Fundamental Thermal Analysis for Cryogenic System Design”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2749-2751. doi:10.18429/JACoW-IPAC2014-WEPRI107
[n] A. Bertarelli, G. Arnau-Izquierdo, F. Carra, A. Dallocchio, M. Gil Costa, and N. Mariani, “Research and Development of Novel Advanced Materials for Next-generation Collimators”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THOBB03, pp. 2888-2890.
[n] A. A. Gorzawski et al., “Observation of Fast Losses in the LHC Operation in 2017”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 740-743. doi:10.18429/JACoW-IPAC2018-TUPAF029
[n] M. Yamamoto et al., “High Power Test of MA Cavity for J-PARC RCS”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH131, pp. 1322-1324.
[n] A. C. C. Villari, D. B. Crisp, A. Lapierre, S. Nash, T. Summers, and Q. Zhao, “Energy Calibration of the Rea3 Accelerator by Time-of-Flight Technique”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2760-2762. doi:10.18429/JACoW-IPAC2019-WEPGW112
[n] B. K. Stillwell, J. D. Fuerst, J. Liu, G. J. Waldschmidt, and G. Wu, “Evaluation of VATSEAL Technology to Seal Waveguide Serving High-field Superconducting RF Cavities”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPC040, pp. 2298-2299.
[n] M. Conde et al., “SRRC/ANL High Current L-Band Single Cell Photocathode RF Gun”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP33C, pp. 1441-1443.
[n] L. van Riesen-Haupt, A. Seryi, J. M. Coello de Portugal, E. Fol, and R. Tomas, “K-Modulation Developments via Simultaneous Beam Based Alignment in the LHC”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2159-2162. doi:10.18429/JACoW-IPAC2017-TUPVA042
[n] J. C. Frisch et al., “Femtosecond Operation of the LCLS for User Experiments”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPE066, pp. 2287-2289.
[n] F. S. Carlier, J. M. Coello de Portugal, E. H. Maclean, T. Persson, and R. Tomas, “Observations of Resonance Driving Terms in the LHC during Runs I and II”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3468-3471. doi:10.18429/JACoW-IPAC2016-THPMR037
[n] C. Gaspar, “An Overview of the LHC Experiments' Control Systems”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper WECOAAB01, pp. 982-986.
[n] E. Quaranta et al., “Radiation-induced Effects on LHC Collimator Materials under Extreme Beam Conditions”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2502-2505. doi:10.18429/JACoW-IPAC2016-WEPMW032
[n] K. Endo, Ta. Kubo, Y. Masuzawa, and Y. Ohsawa, “Switching Mode Power Supply for the Synchrotron Magnet”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2341-2344.
[n] L. Garolfi et al., “Beam Dynamics Studies and Instrumentation Tests for Bunch Length Measurements at CLEAR”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 74-77. doi:10.18429/JACoW-LINAC2018-MOPO020
[n] R. L. Lillestol et al., “Wakefield Monitor Experiments with X-Band Accelerating Structures”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 947-949. doi:10.18429/JACoW-IPAC2015-MOPTY004
[n] L. B. Jones, D. P. Juarez-Lopez, B. L. Militsyn, T. C. Q. Noakes, L. A. J. Soomary, and C. P. Welsch, “Developments in Photocathode R&D at STFC Daresbury Laboratory: New Transverse Energy Spread Measurements and the Development of a Multi-Alkali Photocathode Preparation Facility”, in Proc. ERL'19, Berlin, Germany, Sep. 2019, pp. 103-106. doi:10.18429/JACoW-ERL2019-WEPNEC17
[n] V. Judin et al., “Spectral and Temporal Observations of CSR at ANKA”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPP010, pp. 1623-1625.
[n] K. Hock et al., “Status of AC-Dipole Project at RHIC Injectors for Polarized Helions”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 669-671. doi:10.18429/JACoW-IPAC2018-TUPAF005
[n] H. J. Kim, H. J. Cha, M. O. Hyun, H. C. Jung, Y. J. K. Kim, and M. Lee, “Superconducting Linac for RISP”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP082, pp. 245-247.
[n] A. Faus-Golfe, J. Velasco, and M. Haguenauer, “Luminosity Determination Using Coulomb Scattering at the LHC”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPLE028, pp. 320-322.
[n] M. Dal Forno et al., “Measurements of RF Breakdowns in Beam Driven mm-Wave Accelerating Structures”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 497-500. doi:10.18429/JACoW-IPAC2016-MOPMW041
[n] R. Gobin, O. Delferriere, F. Harrault, B. Pottin, and O. Tuske, “High Intensity Helium Beam at CEA/Saclay”, in Proc. ECRIS'08, Chicago, IL, USA, Sep. 2008, paper MOPO-20, pp. 115-115.
[n] H. Saugnac et al., “Spoke Cryomodule Prototyping for the MINERVA Project”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 315-319. doi:10.18429/JACoW-SRF2019-MOP098
[n] R. L. Sheffield and B. E. Carlsten, “Pre-Conceptual Design Requirements For The MaRIE Facility At LANL And The Resulting X-Ray Free Electron Laser Baseline Design”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC133, pp. 3197-3199.
[n] M. Bai et al., “RHIC Spin Flipper Status and Simulation Studies”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP191, pp. 447-449.
[n] F. Perez, “First Year Operation of the ALBA Synchrotron Light Source”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPEA055, pp. 202-204.
[n] R. K. Cooper and K. C. D. Chan, “Summary of 1990 Code Conference”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TH201, pp. 565-567.
[n] T. Sakai et al., “Low-Temperature Properties of 2.6-Cell Cryogenic C-Band RF-Gun Cold Model Cavity”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 462-464. doi:10.18429/JACoW-LINAC2016-TUPRC021
[n] E. Fol, J. M. Coello de Portugal, G. Franchetti, and R. Tom?ís, “Application of Machine Learning to Beam Diagnostics”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 311-317. doi:10.18429/JACoW-FEL2019-WEB03
For LaTeX
Use Complete Form
For BibTeX
References
- G. Valentino et al., “First Operational Experience with Embedded Collimator BPMs in the LHC”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2510-2513.
- H. Euteneuer and H. Sch?Âler, “Experiences in Fabricating and Testing the RF-Sections of the Mainz Microtron”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper TH3-29, pp. 508-511.
- J. R. Chen, C. K. Kuan, K. Y. Kuo, and D. J. Wang, “The Mechanical Stability of the Electron Beam Position Monitor at the Taiwan Light Source”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP4B16, pp. 2429-2431.
- C. R. Prokop, M. C. Lin, P. Piot, and P. Stoltz, “Start-to-end Simulation of a Compact THz Smith-Purcell FEL”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPD075, pp. 2093-2095.
- H. Kim et al., “Fundamental Thermal Analysis for Cryogenic System Design”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2749-2751.
- A. Bertarelli, G. Arnau-Izquierdo, F. Carra, A. Dallocchio, M. Gil Costa, and N. Mariani, “Research and Development of Novel Advanced Materials for Next-generation Collimators”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THOBB03, pp. 2888-2890.
- A. A. Gorzawski et al., “Observation of Fast Losses in the LHC Operation in 2017”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 740-743.
- M. Yamamoto et al., “High Power Test of MA Cavity for J-PARC RCS”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPCH131, pp. 1322-1324.
- A. C. C. Villari, D. B. Crisp, A. Lapierre, S. Nash, T. Summers, and Q. Zhao, “Energy Calibration of the Rea3 Accelerator by Time-of-Flight Technique”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2760-2762.
- B. K. Stillwell, J. D. Fuerst, J. Liu, G. J. Waldschmidt, and G. Wu, “Evaluation of VATSEAL Technology to Seal Waveguide Serving High-field Superconducting RF Cavities”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPC040, pp. 2298-2299.
- M. Conde et al., “SRRC/ANL High Current L-Band Single Cell Photocathode RF Gun”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP33C, pp. 1441-1443.
- L. van Riesen-Haupt, A. Seryi, J. M. Coello de Portugal, E. Fol, and R. Tomas, “K-Modulation Developments via Simultaneous Beam Based Alignment in the LHC”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2159-2162.
- J. C. Frisch et al., “Femtosecond Operation of the LCLS for User Experiments”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPE066, pp. 2287-2289.
- F. S. Carlier, J. M. Coello de Portugal, E. H. Maclean, T. Persson, and R. Tomas, “Observations of Resonance Driving Terms in the LHC during Runs I and II”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3468-3471.
- C. Gaspar, “An Overview of the LHC Experiments' Control Systems”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper WECOAAB01, pp. 982-986.
- E. Quaranta et al., “Radiation-induced Effects on LHC Collimator Materials under Extreme Beam Conditions”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2502-2505.
- K. Endo, Ta. Kubo, Y. Masuzawa, and Y. Ohsawa, “Switching Mode Power Supply for the Synchrotron Magnet”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2341-2344.
- L. Garolfi et al., “Beam Dynamics Studies and Instrumentation Tests for Bunch Length Measurements at CLEAR”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 74-77.
- R. L. Lillestol et al., “Wakefield Monitor Experiments with X-Band Accelerating Structures”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 947-949.
- L. B. Jones, D. P. Juarez-Lopez, B. L. Militsyn, T. C. Q. Noakes, L. A. J. Soomary, and C. P. Welsch, “Developments in Photocathode R&D at STFC Daresbury Laboratory: New Transverse Energy Spread Measurements and the Development of a Multi-Alkali Photocathode Preparation Facility”, in Proc. 63rd Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'19), Berlin, Germany, Sep. 2019, pp. 103-106.
- V. Judin et al., “Spectral and Temporal Observations of CSR at ANKA”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPP010, pp. 1623-1625.
- K. Hock et al., “Status of AC-Dipole Project at RHIC Injectors for Polarized Helions”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 669-671.
- H. J. Kim, H. J. Cha, M. O. Hyun, H. C. Jung, Y. J. K. Kim, and M. Lee, “Superconducting Linac for RISP”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP082, pp. 245-247.
- A. Faus-Golfe, J. Velasco, and M. Haguenauer, “Luminosity Determination Using Coulomb Scattering at the LHC”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPLE028, pp. 320-322.
- M. Dal Forno et al., “Measurements of RF Breakdowns in Beam Driven mm-Wave Accelerating Structures”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 497-500.
- R. Gobin, O. Delferriere, F. Harrault, B. Pottin, and O. Tuske, “High Intensity Helium Beam at CEA/Saclay”, in Proc. 18th Int. Workshop on ECR Ion Sources (ECRIS'08), Chicago, IL, USA, Sep. 2008, paper MOPO-20, pp. 115-115.
- H. Saugnac et al., “Spoke Cryomodule Prototyping for the MINERVA Project”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 315-319.
- R. L. Sheffield and B. E. Carlsten, “Pre-Conceptual Design Requirements For The MaRIE Facility At LANL And The Resulting X-Ray Free Electron Laser Baseline Design”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPC133, pp. 3197-3199.
- M. Bai et al., “RHIC Spin Flipper Status and Simulation Studies”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP191, pp. 447-449.
- F. Perez, “First Year Operation of the ALBA Synchrotron Light Source”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPEA055, pp. 202-204.
- R. K. Cooper and K. C. D. Chan, “Summary of 1990 Code Conference”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TH201, pp. 565-567.
- T. Sakai et al., “Low-Temperature Properties of 2.6-Cell Cryogenic C-Band RF-Gun Cold Model Cavity”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 462-464.
- E. Fol, J. M. Coello de Portugal, G. Franchetti, and R. Tom?ís, “Application of Machine Learning to Beam Diagnostics”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 311-317.
Back to search