Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] B. Ledroit and K. Aulenbacher, “Collimation of Target Induced Halo Following MAGIX at MESA”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3839-3842. doi:10.18429/JACoW-IPAC2019-THPRB019
[n] F. Grespan et al., “High Power RF Conditioning of the ESS DTL1”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 356-359. doi:10.18429/JACoW-LINAC2022-TUPOJO09
[n] G. Moreno et al., “H11(0) end cells for a 750 MHz IH structure”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1699-1702. doi:10.18429/JACoW-IPAC2023-TUPA171
[n] M. Yotsuzuka et al., “Development of Bunch Width Monitor with High Time Resolution for Low Emittance Muon Beam in the J-PARC Muon g-2 / EDM Experiment”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1004-1007. doi:10.18429/JACoW-IPAC2021-MOPAB325
[n] B. Stechauner, C. Rogers, D. Schulte, E. Fol, J. Schieck, and J. Ferreira Somoza, “Thermodynamic characteristics of hydrogen in an ionization cooling channel for muon colliders”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 917-920. doi:10.18429/JACoW-IPAC2023-MOPL163
[n] B. Bellesia et al., “Short Circuit Tests: First Step of LHC Hardware Commissioning Completion”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC103, pp. 304-306.
[n] R. Versteegen and J. Chavanne, “Impact of the insertion devices operation on the ESRF-EBS equilibrium emittance”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 441-444. doi:10.18429/JACoW-IPAC2023-MOPA165
[n] J. Bengtsson and P. Goslawski, “Withdrawn; see below.”, presented at the IPAC'23, Venice, Italy, May 2023, paper MOPA178, unpublished.
[n] B. Riemann et al., “First Considerations Concerning an Optimized Cavity Design for the Main Linac of BERLinPro”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC080, pp. 259-261.
[n] S. Arsenyev and D. Schulte, “Modelling Wake Impedance of a Rough Surface in Application to the FCC-hh Beamscreen”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 157-160. doi:10.18429/JACoW-IPAC2018-MOPMF031
[n] H. Stockhorst et al., “Beam Shaping Using a New Digital Noise Generator”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPB20, pp. 2574-2576.
[n] R. Steerenberg et al., “Design Study for a CERN Short Base-Line Neutrino Facility”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPEA052, pp. 1250-1252.
[n] L. Giannessi et al., “First Lasing of FERMI FEL-2 (1o Stage) and FERMI FEL-1 Recent Results”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper MOOB06, pp. 13-18.
[n] U. Bechstedt et al., “Optical Notch Filter for the Stochastic Cooling System of COSY”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUP96, pp. 1701-1703.
[n] G. Ha, “Imparting arbitrary correlation on longitudinal phase space using transverse wigglers and deflecting cavities”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 844-847. doi:10.18429/JACoW-IPAC2024-MOPS56
[n] F. Asvesta et al., “Resonance Compensation for High Intensity and High Brightness Beams in the CERN PSB”, in Proc. HB'21, Batavia, IL, USA, Oct. 2021, pp. 40-45. doi:10.18429/JACoW-HB2021-MOP06
[n] H. Schlarb et al., “Next Generation Synchronization System for the VUV-FEL at DESY”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper MOPP036, pp. XX-XX.
[n] M. P. Crouch et al., “Dynamic Aperture Studies of the Long-Range Beam-Beam Interaction at the LHC”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3840-3843. doi:10.18429/JACoW-IPAC2017-THPAB056
[n] R. Lindberg and M. Borland, “Fringe field maps for transverse gradient bending magnets with curved poles”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper MOPS01, unpublished.
[n] B. Salvachua et al., “LHC Operational Scenarios During 2017 Run”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 220-223. doi:10.18429/JACoW-IPAC2018-MOPMF051
[n] M. Basten et al., “First heavy ion beam acceleration with a superconducting multi gap CH-cavity”, in Proc. HIAT'18, Lanzhou, China, Oct. 2018, pp. 129-134. doi:10.18429/JACoW-HIAT2018-WEOYA02
[n] G. P. Di Giovanni et al., “Commissioning of a New Digital Transverse Damper System at the PSB”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1050-1053. doi:10.18429/JACoW-IPAC2019-MOPTS085
[n] W. A. Barth et al., “First Acceleration of Heavy Ion Beams with a Superconducting Continuous Wave HIM/GSI CW-linac”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 297-302. doi:10.18429/JACoW-LINAC2018-TU2A01
[n] A. Al Marzouk and P. Piot, “First-principle simulations of a laser-assisted bunch compression scheme”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 852-855. doi:10.18429/JACoW-IPAC2024-MOPS58
[n] M. Neroni et al., “Longitudinal beam coupling impedance of unshielded pumping manifolds at the CERN PS”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 2310-2313. doi:10.18429/JACoW-IPAC2025-WEPS031
[n] G. Penco et al., “Two-Bunch Operation at the FERMI FEL Facility”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2663-2665. doi:10.18429/JACoW-IPAC2017-WEPAB037
[n] F. D. Dziuba et al., “Performance Tests of the Superconducting 217 MHz CH Cavity for the CW Demonstrator”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 440-443. doi:10.18429/JACoW-SRF2017-TUPB024
[n] D. Zhou, “An Alternative 1D Model for CSR with Chamber Shielding”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOOBB03, pp. 52-54.
[n] J. Branlard et al., “Highlights of the XM-3 Cryomodule Tests at DESY”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 388-390. doi:10.18429/JACoW-LINAC2018-TUPO029
For LaTeX
Use Complete Form
For BibTeX
References
- B. Ledroit and K. Aulenbacher, “Collimation of Target Induced Halo Following MAGIX at MESA”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3839-3842.
- F. Grespan et al., “High Power RF Conditioning of the ESS DTL1”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 356-359.
- G. Moreno et al., “H11(0) end cells for a 750 MHz IH structure”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPA171, pp. 1699-1702.
- M. Yotsuzuka et al., “Development of Bunch Width Monitor with High Time Resolution for Low Emittance Muon Beam in the J-PARC Muon g-2 / EDM Experiment”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1004-1007.
- B. Stechauner, C. Rogers, D. Schulte, E. Fol, J. Schieck, and J. Ferreira Somoza, “Thermodynamic characteristics of hydrogen in an ionization cooling channel for muon colliders”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPL163, pp. 917-920.
- B. Bellesia et al., “Short Circuit Tests: First Step of LHC Hardware Commissioning Completion”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPC103, pp. 304-306.
- R. Versteegen and J. Chavanne, “Impact of the insertion devices operation on the ESRF-EBS equilibrium emittance”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPA165, pp. 441-444.
- J. Bengtsson and P. Goslawski, “Withdrawn; see below.”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPA178, unpublished.
- B. Riemann et al., “First Considerations Concerning an Optimized Cavity Design for the Main Linac of BERLinPro”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPC080, pp. 259-261.
- S. Arsenyev and D. Schulte, “Modelling Wake Impedance of a Rough Surface in Application to the FCC-hh Beamscreen”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 157-160.
- H. Stockhorst et al., “Beam Shaping Using a New Digital Noise Generator”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TPB20, pp. 2574-2576.
- R. Steerenberg et al., “Design Study for a CERN Short Base-Line Neutrino Facility”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPEA052, pp. 1250-1252.
- L. Giannessi et al., “First Lasing of FERMI FEL-2 (1o Stage) and FERMI FEL-1 Recent Results”, in Proc. 34th Int. Free Electron Laser Conf. (FEL'12), Nara, Japan, Aug. 2012, paper MOOB06, pp. 13-18.
- U. Bechstedt et al., “Optical Notch Filter for the Stochastic Cooling System of COSY”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUP96, pp. 1701-1703.
- G. Ha, “Imparting arbitrary correlation on longitudinal phase space using transverse wigglers and deflecting cavities”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPS56, pp. 844-847.
- F. Asvesta et al., “Resonance Compensation for High Intensity and High Brightness Beams in the CERN PSB”, in Proc. 64th Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'21), Batavia, IL, USA, Oct. 2021, paper MOP06, pp. 40-45.
- H. Schlarb et al., “Next Generation Synchronization System for the VUV-FEL at DESY”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper MOPP036, pp. XX-XX.
- M. P. Crouch et al., “Dynamic Aperture Studies of the Long-Range Beam-Beam Interaction at the LHC”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3840-3843.
- R. Lindberg and M. Borland, “Fringe field maps for transverse gradient bending magnets with curved poles”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPS01, unpublished.
- B. Salvachua et al., “LHC Operational Scenarios During 2017 Run”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 220-223.
- M. Basten et al., “First heavy ion beam acceleration with a superconducting multi gap CH-cavity”, in Proc. 14th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'18), Lanzhou, China, Oct. 2018, pp. 129-134.
- G. P. Di Giovanni et al., “Commissioning of a New Digital Transverse Damper System at the PSB”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1050-1053.
- W. A. Barth et al., “First Acceleration of Heavy Ion Beams with a Superconducting Continuous Wave HIM/GSI CW-linac”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 297-302.
- A. Al Marzouk and P. Piot, “First-principle simulations of a laser-assisted bunch compression scheme”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPS58, pp. 852-855.
- M. Neroni et al., “Longitudinal beam coupling impedance of unshielded pumping manifolds at the CERN PS”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPS031, pp. 2310-2313.
- G. Penco et al., “Two-Bunch Operation at the FERMI FEL Facility”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2663-2665.
- F. D. Dziuba et al., “Performance Tests of the Superconducting 217 MHz CH Cavity for the CW Demonstrator”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 440-443.
- D. Zhou, “An Alternative 1D Model for CSR with Chamber Shielding”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOOBB03, pp. 52-54.
- J. Branlard et al., “Highlights of the XM-3 Cryomodule Tests at DESY”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 388-390.
Back to search