Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. D. Machalek, E. A. Meyer, and L. S. Price, “The FMIT Accelerator Vacuum System”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3015-3018.
[n] W. Van Herck, B. Bauvir, and G. Ferro, “Automated Operation of ITER Using Behavior Tree Semantics”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 628-630. doi:10.18429/JACoW-ICALEPCS2021-WEPV006
[n] M. A. Furman and A. A. Zholents, “Incoherent Effects Driven by the Electron Cloud”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUP130, pp. 1794-1796.
[n] D. N. Shatilov and A. A. Zholents, “Lifetime and Tail Simulations for Beam-Beam Effects in PEP-II B Factory”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAP05, pp. 2892-2894.
[n] M. E. Conde, K.-J. Kim, S. Chattopadhyay, A. T. Young, K.-N. Leung, and S.-I. Kwon, “Electron Quantum Yields from a Barium Photocathode Illuminated with Polarized Light”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3042-3045.
[n] D. Christian et al., “Results from a helium flowmeter that measures SRF cavity Q0s in situ”, presented at the SRF'25, Tokyo, Japan, Sep. 2025, paper TUP76, unpublished.
[n] K. Deitrick, “Microbunching gain evaluation of bunch compressor designs”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEPS106, unpublished.
[n] M. Yang, F. S. Chen, W. Kang, X. J. Sun, and Y. S. Zhu, “CEPC Collider and Booster Magnets”, in Proc. eeFACT'18, Hong Kong, China, Sep. 2018, pp. 247. doi:10.18429/JACoW-eeFACT2018-WEOBB05
[n] P. P. Goryl, M. Liszcz, A. Gotz, L. Pivetta, and V. H. Hardion, “Towards Specification of Tango V10”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 330. doi:10.18429/JACoW-ICALEPCS2019-MOPHA051
[n] T. Garvey et al., “First Beam Tests of the TTF Injector”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4W003, pp. 2823-2825.
[n] J. Beveridge et al., “Initial Operating Experience with the TRIUMF 300 keV H- Injection System”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1707-1711.
[n] G. A. Krafft, C. H. Kim, and L. Smith, “The LBL Neutralized Beam Focusing Experiment”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2486-2489.
[n] J. John et al., “Harmonic Cascade FEL Designs for LUX, a Facilty for Ultrafast X-ray Science”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper THPOS51, pp. XX-XX.
[n] S. Karabekyan, S. Abeghyan, W. Freund, and L. Froehlich, “Automation of the Undulator Middle Plane Alignment Relative to the Electron Beam Position Using the K-Monochromator”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 374. doi:10.18429/JACoW-ICALEPCS2019-MOPHA069
[n] J. Juanhuix and M. Traveria, “Magnetic Design and light characteristics of the LLS Undulators”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP23G, pp. 2252-2254.
[n] A. Faltens and S. S. Rosenblum, “Investigation of Re-X Glass Ceramic for Accelerator Insulating Columns”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3131-3134.
[n] J. Kang et al., “Design Study of the 30 MeV Cyclotron Magnet”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPLS078, pp. 2559-2561.
[n] M. Napolitano et al., “Status of the High Current Proton Accelerator for the TRASCO Program”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THBLA002, pp. 251-253.
[n] Y.-C. Du, Q. Du, W.-H. Huang, Y. Lin, C.-X. Tang, and S. Zheng, “Preliminary Experiment of the Thomson Scattering X-ray Source at Tsinghua University”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS044, pp. 3386-3388.
[n] T. Bass, E. Johnson, M. Fraser, P. A. Arrutia Sota, S. Gibson, and Y. Dutheil, “Benchmarking simulations of slow extraction driven by RF transverse excitation at the CERN Proton Synchrotron”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2487-2490. doi:10.18429/JACoW-IPAC2023-TUPM116
[n] J. Kewisch, V. Ptitsin, J. Rose, and J. Wei, “RHIC Longitudinal Parameter Revision”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP12C, pp. 377-379.
[n] C. Adolphsen and T. Slaton, “Beam Trajectory Jitter in the SLC Linac”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAB08, pp. 3034-3036.
[n] A. Hoffmann et al., “Optimization of the THz SASE FEL at PITZ”, presented at the IPAC'23, Venice, Italy, May 2023, paper TUPL011, unpublished.
[n] S. H. Shin, E.-S. Kim, and M. Yoon, “Beam-optics Analysis and Periodicity Restoration in the Storage Ring of the Pohang Light Source”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS048, pp. 3395-3397.
[n] D. L. Hall et al., “Nb3Sn Cavities: Material Characterization and Coating Process Optimization”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper TUBA04, pp. 501-504.
[n] W. Chou, “Overview of proton driver studies for neutrino and muon factories”, in Proc. HB'06, Tsukuba, Japan, May-Jun. 2006, paper TUAY01, pp. 64-68.
[n] G. M. Gammel, A. W. Maschke, and R. M. Mobley, “Bunched Beam Neutralization”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3029-3031.
[n] H. O. Moser and C. Z. Diao, “Analytical and Numerical Study of Superconducting Miniundulators”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper TUP14019, pp. XX-XX.
[n] A. L. Hillman, S. J. Pasky, N. Sereno, R. Soliday, and J. Wang, “Injector Power Supplies Reliability Improvements at the Advanced Photon Source”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAE070, pp. 3804-3806.
[n] R. J. Macek et al., “Overview of Progress on the Improvement Projects for the LANSCE Accelerator and Target Facilities”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5W021, pp. 1159-1161.
[n] C. Hovater, H. Dong, J. Musson, G. Lahti, T. Plawski, and A. Hofler, “A New RF System for the CEBAF Normal Conducting Cavities”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper TUP79, pp. 456-458.
For LaTeX
Use Complete Form
For BibTeX
References
- M. D. Machalek, E. A. Meyer, and L. S. Price, “The FMIT Accelerator Vacuum System”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3015-3018.
- W. Van Herck, B. Bauvir, and G. Ferro, “Automated Operation of ITER Using Behavior Tree Semantics”, in Proc. 18th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'21), Shanghai, China, Oct. 2021, pp. 628-630.
- M. A. Furman and A. A. Zholents, “Incoherent Effects Driven by the Electron Cloud”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUP130, pp. 1794-1796.
- D. N. Shatilov and A. A. Zholents, “Lifetime and Tail Simulations for Beam-Beam Effects in PEP-II B Factory”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RAP05, pp. 2892-2894.
- M. E. Conde, K.-J. Kim, S. Chattopadhyay, A. T. Young, K.-N. Leung, and S.-I. Kwon, “Electron Quantum Yields from a Barium Photocathode Illuminated with Polarized Light”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3042-3045.
- D. Christian et al., “Results from a helium flowmeter that measures SRF cavity Q0s in situ”, presented at the 22st International Conference on RF Superconductivity (SRF'25), Tokyo, Japan, Sep. 2025, paper TUP76, unpublished.
- K. Deitrick, “Microbunching gain evaluation of bunch compressor designs”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPS106, unpublished.
- M. Yang, F. S. Chen, W. Kang, X. J. Sun, and Y. S. Zhu, “CEPC Collider and Booster Magnets”, in Proc. 62nd ICFA Advanced Beam Dynamics Workshop on High Luminosity Circular e+e- Colliders (eeFACT'18), Hong Kong, China, Sep. 2018, pp. 247.
- P. P. Goryl, M. Liszcz, A. Gotz, L. Pivetta, and V. H. Hardion, “Towards Specification of Tango V10”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 330.
- T. Garvey et al., “First Beam Tests of the TTF Injector”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 4W003, pp. 2823-2825.
- J. Beveridge et al., “Initial Operating Experience with the TRIUMF 300 keV H- Injection System”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1707-1711.
- G. A. Krafft, C. H. Kim, and L. Smith, “The LBL Neutralized Beam Focusing Experiment”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2486-2489.
- J. John et al., “Harmonic Cascade FEL Designs for LUX, a Facilty for Ultrafast X-ray Science”, in Proc. 26th Int. Free Electron Laser Conf. & 11th FEL Users Workshop (FEL'04), Trieste, Italy, Aug.-Sep. 2004, paper THPOS51, pp. XX-XX.
- S. Karabekyan, S. Abeghyan, W. Freund, and L. Froehlich, “Automation of the Undulator Middle Plane Alignment Relative to the Electron Beam Position Using the K-Monochromator”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 374.
- J. Juanhuix and M. Traveria, “Magnetic Design and light characteristics of the LLS Undulators”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP23G, pp. 2252-2254.
- A. Faltens and S. S. Rosenblum, “Investigation of Re-X Glass Ceramic for Accelerator Insulating Columns”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3131-3134.
- J. Kang et al., “Design Study of the 30 MeV Cyclotron Magnet”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPLS078, pp. 2559-2561.
- M. Napolitano et al., “Status of the High Current Proton Accelerator for the TRASCO Program”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THBLA002, pp. 251-253.
- Y.-C. Du, Q. Du, W.-H. Huang, Y. Lin, C.-X. Tang, and S. Zheng, “Preliminary Experiment of the Thomson Scattering X-ray Source at Tsinghua University”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPLS044, pp. 3386-3388.
- T. Bass, E. Johnson, M. Fraser, P. A. Arrutia Sota, S. Gibson, and Y. Dutheil, “Benchmarking simulations of slow extraction driven by RF transverse excitation at the CERN Proton Synchrotron”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPM116, pp. 2487-2490.
- J. Kewisch, V. Ptitsin, J. Rose, and J. Wei, “RHIC Longitudinal Parameter Revision”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP12C, pp. 377-379.
- C. Adolphsen and T. Slaton, “Beam Trajectory Jitter in the SLC Linac”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WAB08, pp. 3034-3036.
- A. Hoffmann et al., “Optimization of the THz SASE FEL at PITZ”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPL011, unpublished.
- S. H. Shin, E.-S. Kim, and M. Yoon, “Beam-optics Analysis and Periodicity Restoration in the Storage Ring of the Pohang Light Source”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPLS048, pp. 3395-3397.
- D. L. Hall et al., “Nb3Sn Cavities: Material Characterization and Coating Process Optimization”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper TUBA04, pp. 501-504.
- W. Chou, “Overview of proton driver studies for neutrino and muon factories”, in Proc. 39th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'06), Tsukuba, Japan, May-Jun. 2006, paper TUAY01, pp. 64-68.
- G. M. Gammel, A. W. Maschke, and R. M. Mobley, “Bunched Beam Neutralization”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3029-3031.
- H. O. Moser and C. Z. Diao, “Analytical and Numerical Study of Superconducting Miniundulators”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper TUP14019, pp. XX-XX.
- A. L. Hillman, S. J. Pasky, N. Sereno, R. Soliday, and J. Wang, “Injector Power Supplies Reliability Improvements at the Advanced Photon Source”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAE070, pp. 3804-3806.
- R. J. Macek et al., “Overview of Progress on the Improvement Projects for the LANSCE Accelerator and Target Facilities”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 5W021, pp. 1159-1161.
- C. Hovater, H. Dong, J. Musson, G. Lahti, T. Plawski, and A. Hofler, “A New RF System for the CEBAF Normal Conducting Cavities”, in Proc. 22nd Linear Accelerator Conf. (LINAC'04), Lübeck, Germany, Aug. 2004, paper TUP79, pp. 456-458.
Back to search