Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] G. Geloni, V. Kocharyan, and E. Saldin, “Improvement of the Crossed Undulator Design for Effective Circular Polarization”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper MOPB25, pp. 61-64.
[n] F. Lin, Y. Cai, V. S. Morozov, Y. M. Nosochkov, and Y. Zhang, “Update on the JLEIC Electron Collider Ring Design”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2780-2782. doi:10.18429/JACoW-IPAC2019-WEPGW121
[n] R. J. England et al., “Applications for Optical-Scale Dielectric Laser Accelerators”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPAC28, pp. 129-131.
[n] K. Takahashi et al., “Profile Measurements of Bremsstrahlung Gamma-Rays from Tungsten Plates for Radioactive Isotope Production via Photonuclear Reaction using a 60 MeV Electron Linac”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1766-1768. doi:10.18429/JACoW-IPAC2016-TUPOW011
[n] R. Appleby et al., “The 2mrad Crossing Angle Interaction Region and Extraction Line”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPLS077, pp. 730-732.
[n] J. Kim, M. Kim, I. H. Nam, H. Suk, and M. S. Hur, “Numerical Studies on Tunable Coherent Radiations with a Laser-Plasma Accelerator”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2579-2581. doi:10.18429/JACoW-IPAC2016-WEPMY015
[n] M. Wendt et al., “High Resolution Cavity BPM for the CLIC Test Facility”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper TUPSM032, pp. 189-193.
[n] P. M. McIntyre and W. Shen, “16 Tesla Block-Coil Dipole for Future Hadron Colliders”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAQ31, pp. 1462-1464.
[n] M. Kase, “PRESENT STATUS OF THE RIKEN RING CYCLOTRON”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 18P24, pp. XX-XX.
[n] S. Z. Zhang, Y.-M. Abiven, F. Blache, D. Corruble, C. K. Kheffafa, and S. M. Minolli, “Revolution Project: Progress in the Evolution of Soleil Motion Control Model”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 201-204. doi:10.18429/JACoW-ICALEPCS2015-MOPGF047
[n] D. Leitner, “FIRST RESULTS FOR THE 28 GHZ OPERATION OF THE SUPERCONDUCTING ECR ION SOURCE VENUS”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 19A6, pp. XX-XX.
[n] V. A. Dolgashev, “Traveling Wave Linear Accelerator With RF Power Flow Outside of Accelerating Cavities”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 48-51. doi:10.18429/JACoW-LINAC2016-MOOP04
[n] K. Saito and P. Kneisel, “Temperature Dependence of the Surface Resistance of Niobium at 1300 MHz - Comparison to BCS Theory -”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper TUP031, pp. 277-282.
[n] J. Keintzel et al., “Second Order Dispersion Measurements in LHC”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 496-499. doi:10.18429/JACoW-IPAC2019-MOPMP027
[n] T. Kamps, K. Holldack, and P. Kuske, “Optical Transition Radiation Based Beam Diagnostics at the BESSY Synchrotron Radiation Source and FEL Accelerators”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT027, pp. 2532-2534.
[n] H. Dzitko et al., “Operational Efficiency of the AIRIX Accelerator Since its Commissioning”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPR025, pp. 4017-4019.
[n] P. N. Ostroumov, “Heavy Ion Superconducting Linacs: Status and Upgrade Projects”, in Proc. HIAT'12, Chicago, IL, USA, Jun. 2012, paper THA01, pp. 196-196.
[n] W. J. Gallagher, “Relativistic Multipactoring”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 2008-2010.
[n] J. A. Holmes, S. M. Cousineau, T. V. Gorlov, and M. A. Plum, “Injection of a Self-Consistent Beam at the Spallation Neutron Source”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4516-4518. doi:10.18429/JACoW-IPAC2017-THPVA037
[n] M. Valette, P. A. P. Nghiem, and N. Pichoff, “Core-halo Limits and Beam Halo-formation Dynamic”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3417-3419. doi:10.18429/JACoW-IPAC2016-THPMR014
[n] G. Franzini et al., “Final Design and Features of the B-train System of CNAO”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEB079, pp. 2878-2880.
[n] R. S. Larsen, “Challenges for Emerging New Electronics Standards for Physics”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper TUBAUIO05, pp. 558-562.
[n] S. Federmann, F. Caspers, A. Grudiev, E. Montesinos, and I. Syratchev, “High Temperature Radio Frequency Loads”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPS103, pp. 1783-1785.
[n] N. Akasaka et al., “C-band RF Main Linac System for eE- Linear Collider at 500 GeV to 1 TeV C.M. Energy”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP087G, pp. 792-794.
[n] H.-D. Nuhn et al., “A Longitudinal Multibunch Feedback System for PEP”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1410-1413.
[n] Y. Y. Du et al., “The Design and Optimization of Digital Beam Position Monitor Processor in HEPS”, presented at the IBIC'23, Saskatoon, Canada, Sep. 2023, paper MOP024, unpublished.
[n] B. D. Muratori and D. J. Holder, “Matching with Space Charge”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC085, pp. 2192-2194.
[n] J. Alessi et al., “The AGS H RFQ Preinjector”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper MO3-59, pp. 196-198.
[n] S. K. Sharma, C. Amundsen, F. A. DePaola, and J. L. Tuozzolo, “Frontend Slits for Closely-Spaced Wiggler Beams”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 424-426. doi:10.18429/JACoW-MEDSI2018-THPH41
[n] A. V. Smirnov, “On the Characterization of a CCR Source”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1926-1928. doi:10.18429/JACoW-IPAC2015-TUPMA041
[n] L. R. Evans, “The Large Hadron Collider”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FPD04, pp. 40-44.
[n] D. Trbojevic, Y. Papaphilippou, S. Peggs, and R. de Maria, “Lattice without Transition Energy for the Future PS2”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC129, pp. 370-372.
[n] G. Sterbini, D. Schulte, and E. Adli, “A Comparative Study for the CLIC Drive Beam Decelerator Optics”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR035, pp. 1897-1899.
[n] Y. Takeda and M. A. Plum, “Thermal Simulations of Charge-exchange Stripper Foils for High-melting-point Materials”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPFI011, pp. 3312-3314.
[n] T. Shirai, “Performance of the 100 MeV Injector Linac for the Electron Storage Ring at Kyoto University”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper MOP74, pp. 240-242.
[n] G. Arduini, H. Burkhardt, K. Cornelis, Y. Papaphilippou, F. Zimmermann, and M. P. Zorzano, “Measurements of Coherent Tune Shifts and Head-Tail Growth Rates at the CERN SPS”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP7B09, pp. 1447-1452.
[n] X. Shen et al., “AC Dipole Based Optics Measurement and Correction at RHIC”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPBA04, pp. 526-528.
[n] D. R. Bett, A. Boccardi, M. Krupa, and M. Wendt, “Simulation of the Signal Processing for the New Interaction Region BPMs of the High Luminosity LHC”, in Proc. IBIC'20, Santos, Brazil, Sep. 2020, pp. 120-123. doi:10.18429/JACoW-IBIC2020-WEPP12
[n] M. Schaer et al., “Optimization Studies for the SwissFEL RF-Gun”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPFI062, pp. 425-427.
For LaTeX
Use Complete Form
For BibTeX
References
- G. Geloni, V. Kocharyan, and E. Saldin, “Improvement of the Crossed Undulator Design for Effective Circular Polarization”, in Proc. 33rd Int. Free Electron Laser Conf. (FEL'11), Shanghai, China, Aug. 2011, paper MOPB25, pp. 61-64.
- F. Lin, Y. Cai, V. S. Morozov, Y. M. Nosochkov, and Y. Zhang, “Update on the JLEIC Electron Collider Ring Design”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2780-2782.
- R. J. England et al., “Applications for Optical-Scale Dielectric Laser Accelerators”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPAC28, pp. 129-131.
- K. Takahashi et al., “Profile Measurements of Bremsstrahlung Gamma-Rays from Tungsten Plates for Radioactive Isotope Production via Photonuclear Reaction using a 60 MeV Electron Linac”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1766-1768.
- R. Appleby et al., “The 2mrad Crossing Angle Interaction Region and Extraction Line”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPLS077, pp. 730-732.
- J. Kim, M. Kim, I. H. Nam, H. Suk, and M. S. Hur, “Numerical Studies on Tunable Coherent Radiations with a Laser-Plasma Accelerator”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2579-2581.
- M. Wendt et al., “High Resolution Cavity BPM for the CLIC Test Facility”, in Proc. 14th Beam Instrumentation Workshop (BIW'10), Santa Fe, NM, USA, May 2010, paper TUPSM032, pp. 189-193.
- P. M. McIntyre and W. Shen, “16 Tesla Block-Coil Dipole for Future Hadron Colliders”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper FAQ31, pp. 1462-1464.
- M. Kase, “PRESENT STATUS OF THE RIKEN RING CYCLOTRON”, in Proc. 17th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'04), Tokyo, Japan, Oct. 2004, paper 18P24, pp. XX-XX.
- S. Z. Zhang, Y.-M. Abiven, F. Blache, D. Corruble, C. K. Kheffafa, and S. M. Minolli, “Revolution Project: Progress in the Evolution of Soleil Motion Control Model”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 201-204.
- D. Leitner, “FIRST RESULTS FOR THE 28 GHZ OPERATION OF THE SUPERCONDUCTING ECR ION SOURCE VENUS”, in Proc. 17th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'04), Tokyo, Japan, Oct. 2004, paper 19A6, pp. XX-XX.
- V. A. Dolgashev, “Traveling Wave Linear Accelerator With RF Power Flow Outside of Accelerating Cavities”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 48-51.
- K. Saito and P. Kneisel, “Temperature Dependence of the Surface Resistance of Niobium at 1300 MHz - Comparison to BCS Theory -”, in Proc. 9th Int. Conf. RF Superconductivity (SRF'99), Santa Fe, NM, USA, Nov. 1999, paper TUP031, pp. 277-282.
- J. Keintzel et al., “Second Order Dispersion Measurements in LHC”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 496-499.
- T. Kamps, K. Holldack, and P. Kuske, “Optical Transition Radiation Based Beam Diagnostics at the BESSY Synchrotron Radiation Source and FEL Accelerators”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPLT027, pp. 2532-2534.
- H. Dzitko et al., “Operational Efficiency of the AIRIX Accelerator Since its Commissioning”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPR025, pp. 4017-4019.
- P. N. Ostroumov, “Heavy Ion Superconducting Linacs: Status and Upgrade Projects”, in Proc. 12th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'12), Chicago, IL, USA, Jun. 2012, paper THA01, pp. 196-196.
- W. J. Gallagher, “Relativistic Multipactoring”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 2008-2010.
- J. A. Holmes, S. M. Cousineau, T. V. Gorlov, and M. A. Plum, “Injection of a Self-Consistent Beam at the Spallation Neutron Source”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4516-4518.
- M. Valette, P. A. P. Nghiem, and N. Pichoff, “Core-halo Limits and Beam Halo-formation Dynamic”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3417-3419.
- G. Franzini et al., “Final Design and Features of the B-train System of CNAO”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEB079, pp. 2878-2880.
- R. S. Larsen, “Challenges for Emerging New Electronics Standards for Physics”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper TUBAUIO05, pp. 558-562.
- S. Federmann, F. Caspers, A. Grudiev, E. Montesinos, and I. Syratchev, “High Temperature Radio Frequency Loads”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPS103, pp. 1783-1785.
- N. Akasaka et al., “C-band RF Main Linac System for eE- Linear Collider at 500 GeV to 1 TeV C.M. Energy”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP087G, pp. 792-794.
- H.-D. Nuhn et al., “A Longitudinal Multibunch Feedback System for PEP”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1410-1413.
- Y. Y. Du et al., “The Design and Optimization of Digital Beam Position Monitor Processor in HEPS”, presented at the 12th International Beam Instrumentation Conference (IBIC'23), Saskatoon, Canada # e.g. "Barcelona, Spain" or "San Francisco, CA, USA", Sep. 2023, paper MOP024, unpublished.
- B. D. Muratori and D. J. Holder, “Matching with Space Charge”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC085, pp. 2192-2194.
- J. Alessi et al., “The AGS H RFQ Preinjector”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper MO3-59, pp. 196-198.
- S. K. Sharma, C. Amundsen, F. A. DePaola, and J. L. Tuozzolo, “Frontend Slits for Closely-Spaced Wiggler Beams”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 424-426.
- A. V. Smirnov, “On the Characterization of a CCR Source”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1926-1928.
- L. R. Evans, “The Large Hadron Collider”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper FPD04, pp. 40-44.
- D. Trbojevic, Y. Papaphilippou, S. Peggs, and R. de Maria, “Lattice without Transition Energy for the Future PS2”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPC129, pp. 370-372.
- G. Sterbini, D. Schulte, and E. Adli, “A Comparative Study for the CLIC Drive Beam Decelerator Optics”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPR035, pp. 1897-1899.
- Y. Takeda and M. A. Plum, “Thermal Simulations of Charge-exchange Stripper Foils for High-melting-point Materials”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPFI011, pp. 3312-3314.
- T. Shirai, “Performance of the 100 MeV Injector Linac for the Electron Storage Ring at Kyoto University”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper MOP74, pp. 240-242.
- G. Arduini, H. Burkhardt, K. Cornelis, Y. Papaphilippou, F. Zimmermann, and M. P. Zorzano, “Measurements of Coherent Tune Shifts and Head-Tail Growth Rates at the CERN SPS”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP7B09, pp. 1447-1452.
- X. Shen et al., “AC Dipole Based Optics Measurement and Correction at RHIC”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPBA04, pp. 526-528.
- D. R. Bett, A. Boccardi, M. Krupa, and M. Wendt, “Simulation of the Signal Processing for the New Interaction Region BPMs of the High Luminosity LHC”, in Proc. 9th Int. Beam Instrumentation Conf. (IBIC'20), Santos, Brazil, Sep. 2020, pp. 120-123.
- M. Schaer et al., “Optimization Studies for the SwissFEL RF-Gun”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPFI062, pp. 425-427.
Back to search