JaCoW Logo

Reference Search

Warning
Some papers titles are all uppercase, you must correct this before using this reference.

Some papers have malformed authors, please correct this before using these references.

The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	The GANIL Study Group, GANIL, Orsay, France, “GANIL: A proposal for a French Heavy-Ion Laboratory (Invited paper)”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper B-01, pp. 111-116. 
[n]	A. V. Pavlenko, A. M. Batrakov, and I. V. Ilyin, “Electronics for Precise Measurements of Accelerator Pulsed Magnets”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPEA033, pp. 3216-3218. 
[n]	V. Martinelli et al., “High Level Software for Beam 6D Phase Space Characterization”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2522-2525. doi:10.18429/JACoW-IPAC2019-WEPGW025
[n]	W. H. Hwang et al., “Phase Measurement and Compensation System in PLS 2.5 GeV Linac for PAL-XFEL”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH136, pp. 1337-1339. 
[n]	M. Lonza, D. Bulfone, V. Forchi, and G. Gaio, “Commissioning of the ELETTRA Fast Orbit Feedback System”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAN024, pp. 203-205. 
[n]	A. Ando, T. L. Collins, and D. E. Johnson, “Design of an 8-GeV Accumulator Ring for the Fermilab Tevatron I Project”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2031-2033. 
[n]	D. R. Victory, K. Elliott, B. Oja, J. T. Popielarski, and M. S. Wilbur, “First FRIB =0.53 Prototype Coldmasss Build”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 538-540. doi:10.18429/JACoW-LINAC2016-TUPLR030
[n]	L. Dubal, “Non-Computerized, off-axial Tomography with 580-MeV Protons”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper F-15, pp. 471-473. 
[n]	E. E. Wisniewski et al., “Electron Emission Studies in the New High-charge Cs2Te Photoinjector at Argonne National Laboratory”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPFI076, pp. 455-457. 
[n]	I. D. Kaganovich, R. C. Davidson, and E. A. Startsev, “Ionization Cross-Sections in Ion-Atom Collisions for High Energy Ion Beams”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPB023, pp. 1667-1669. 
[n]	Y. Trenikhina, J. Zasadzinski, and A. Romanenko, “Nanostructural TEM/STEM Studies of Hot and Cold Spots in SRF Cavities”, in Proc. SRF'13, Paris, France, Sep. 2013, paper TUP043, pp. 504-507. 
[n]	F. Iazzourene, V. Forchi, and C. Scafuri, “Application Programs for the Elettra Booster Commissioning and Operation”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPP005, pp. 1535-1537. 
[n]	M. Seo, G. Ha, and S. H. Park, “Preliminary computational study on minimizing longitudinal emittance in photoinjector”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 824-828. doi:10.18429/JACoW-NAPAC2025-WEP069
[n]	R. B. Palmer, “Muon Collider Progress”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU1GRI03, pp. 652-656. 
[n]	D. L. Bruhwiler, “Simulating Electron-Ion Dynamics in Relativistic Electron Coolers”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU1PBI02, pp. 635-635. 
[n]	G. G. Voronin, A. S. Ivanov, and M. P. Svinjin, “Research and Applied Neutron Generators”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1849-1852. 
[n]	M. F. Fernandes et al., “Optimized Cryogenic Current Comparator for CERN's Low-Energy Antiproton Facilities”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 161-164. doi:10.18429/JACoW-IBIC2016-MOPG48
[n]	A. Fiebig and R. Hohbach, “Principles and Performance of the Cee Beam Stretching System at CERN SC 2”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper C-09, pp. 175-179. 
[n]	F. Marti, H. Blosser, D. Johnson, D. Lawton, and J. Vincent, “A Separated Sector Cyclotron for the Production of High Intensity Protons”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7W027, pp. 1057-1059. 
[n]	C. Maccani, D. Veres, M. Rakic, and P. Hermes, “Impact of Landau Octupoles on the Transverse Beam Halo Distribution in the LHC”, presented at the IPAC'26, Deauville, France, May 2026, paper WEP5117, unpublished. 
[n]	P. Musumeci, J. B. Rosenzweig, and R. Yoder, “Velocity Bunching Experiment at the Neptune Laboratory”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAB037, pp. 2117-2119. 
[n]	L. Spallino et al., “Vacuum Facility at LNF-INFN for Present and Future Accelerators”, presented at the IPAC'26, Deauville, France, May 2026, paper MOP7094, unpublished. 
[n]	M. J. Boland, D. J. Peake, and R. P. Rassool, “Preliminary Studies for Top-up Operations at the Australian Synchrotron”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMN002, pp. 3856-3858. 
[n]	Z. Li et al., “Normal Conducting CW Transverse Crab Cavity For Producing Short Pulses In SPEAR3”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2840-2843. doi:10.18429/JACoW-IPAC2017-WEPAB115
[n]	J. M. Brennan et al., “Operation of the RHIC RF Systems”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper ROAA006, pp. 476-478. 
[n]	M. Kwiatkowski and B. Todd, “Dependable Design Flow for Protection Systems using Programmable Logic Devices”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEMMU010, pp. 706-709. 
[n]	I. Shin, S. Ahmed, T. Satogata, and B. C. Yunn, “Comparison of RF Cavity Transport Models for BBU Simulations”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP048, pp. 1582-1584. 
[n]	G. Strangolino, G. Gaio, and R. Passuello, “New Generation Qt Control Components for Hi Level Software”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1291-1294. doi:10.18429/JACoW-ICALEPCS2023-THPDP001
[n]	D. J. Liska et al., “Modular Design Aspects of the FMIT Drift-Tube Linac”, in Proc. LINAC'79, Montauk, NY, USA, Sep. 1979, paper S7-6, pp. 396-400. 
[n]	S. V. Tolmachev, A. A. Varfolomeev, and A. Varfolomeev Jr, “STRONG TAPERED UNDULATOR PROVIDING HIGH ENERGY GAIN”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper THAP02, pp. XX-XX. 
[n]	Y. Trenikhina, A. Grassellino, and A. Romanenko, “Chemical Structure of Niobium Samples Vacuum Treated in Nitrogen in Parallel With Very High Q0 Cavities”, in Proc. SRF'13, Paris, France, Sep. 2013, paper TUP065, pp. 583-585. 
[n]	R. Kammering and J. Carwardine, “An orbit feedback for the Free Electron Laser in Hamburg (FLASH)”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper WEPL015, pp. 58-60. 
[n]	M. Seo, G. Ha, and S. H. Park, “Preliminary computational study on minimizing longitudinal emittance in photoinjector”, presented at the NAPAC'25, Sacramento, California, USA, Aug. 2025, paper SUP030, unpublished. 
[n]	D. Luo et al., “Solenoid/Magnetic Shielding Test Results in FRIB-1&2 Cryomodules”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 607-609. doi:10.18429/JACoW-LINAC2016-TUPLR067
[n]	S. G. Arutunian et al., “Vibrating Wire as a Miniature Scanner for Thin Beams Profiling in Accelerators”, presented at the RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, paper WEPSC46, unpublished. 
[n]	D. Bulfone, V. Forchi, M. Lonza, L. Zambon, and M. Dehler, “The ELETTRA Digital Multi-Bunch Feedback Systems”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPRI035, pp. 2061-2063. 
[n]	G. Travish, G. Andonian, P. Frigola, S. Reiche, J. B. Rosenzweig, and S. Telfer, “The UCLA Pegasus Plane-Wave Transformer Photoinjector”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAB031, pp. 2112-2113. 
[n]	S. M. Liuzzo et al., “Update on the EBS Storage Ring Beam Dynamics Digital Twin”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1306-1311. doi:10.18429/JACoW-ICALEPCS2023-THPDP010
[n]	L. Pauwels et al., “Modelling beam losses in CERN’s Super Proton Synchrotron with Xsuite”, presented at the IPAC'26, Deauville, France, May 2026, paper THP4103, unpublished. 
[n]	Y. Trenikhina, S. Posen, A. Romanenko, D. L. Hall, and M. Liepe, “Characterization of Nb3Sn Coated Nb Samples”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper TUPB056, pp. 708-711. 
[n]	A. Angelovski et al., “Realization and Measurements of Cone-shaped Pickups for Bunch Arrival-time Monitors for FLASH and XFEL”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper MOPA46, pp. 165-167. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search