JaCoW Logo

Reference Search

Warning
Some papers have malformed authors, please correct this before using these references.

Favourites


For Word

[n]	Y. Wada, T. Kubota, and A. Ogata, “Neutral Beam Generation by Laser Irradiation of Thin Foils”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPRI013, pp. 1747-1749. 
[n]	A. Gallifa Terricabras et al., “Optimizing the Manufacture of High-Purity Niobium SRF Cavities Using the Forming Limit Diagram: A Case Study of the HL-LHC Crab Cavities RFD Pole”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 627-633. doi:10.18429/JACoW-SRF2023-WEIXA03
[n]	A. Pires, A.-S. Chauchat, M. Collet, V. Le Flanchec, and N. Delerue, “Emittance growth study of an electron beam in a double-alpha magnet compressor used in an Inverse Compton Scattering X-ray source”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2154-2157. doi:10.18429/JACoW-IPAC2023-TUPL172
[n]	R. Esposito et al., “Third-Generation CERN n_TOF Spallation Target: Final Design and Examinations of Irradiated Prototype”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3555-3558. doi:10.18429/JACoW-IPAC2021-WEPAB364
[n]	T. Griesemer et al., “ALS-U accumulator ring raft and dipole installation”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1302-1304. doi:10.18429/JACoW-IPAC2024-TUPG35
[n]	A. Scheinker, “Adaptive Control and Machine Learning for Particle Accelerator Beam Control and Diagnostics”, in Proc. IBIC'21, Pohang, Korea, Sep. 2021, pp. 466-472. doi:10.18429/JACoW-IBIC2021-THOB03
[n]	M. J. Barnes et al., “Mitigation of High Voltage Breakdown of the Beam Screen of a CERN SPS Injection Kicker Magnet”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2868-2871. doi:10.18429/JACoW-IPAC2022-THPOTK043
[n]	B. J. Wang, Y. H. Guo, R. Wang, and N. Xie, “Design of Magnet Measurement System Based on Multi-Hall Sensor”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 653-655. doi:10.18429/JACoW-ICALEPCS2021-WEPV013
[n]	M. Harvey et al., “Realization of a Custom Designed FPGA Based Embedded Controller”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper WPPB25, pp. 451-453. 
[n]	E. G. Parozzi et al., “The ENUBET Multi Momentum Secondary Beamline Design”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3053-3056. doi:10.18429/JACoW-IPAC2021-WEPAB187
[n]	N. Chelidze, R. Ainsworth, and K. J. Hazelwood, “The Effect of the Main Injector Ramp on the Recycler”, in Proc. NAPAC'22, Albuquerque, NM, USA, Aug. 2022, pp. 90-92. doi:10.18429/JACoW-NAPAC2022-MOPA19
[n]	W. Cichalewski and K. Klys, “Software Tools for Hardware Elliptical Cavity Simulator Management and Configuration”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1154. doi:10.18429/JACoW-ICALEPCS2019-WEPHA034
[n]	D. Walz, R. Helm, J. Irwin, and W. R. Nelson, “Conventional Collimation and Linac Protection”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 185-188. 
[n]	S. Morales Vigo et al., “LHC BLM-based beam loss pattern recognition algorithm for off-momentum losses”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 3137-3140. doi:10.18429/JACoW-IPAC2025-THPS084
[n]	A. G. Valentinov, V. Korchuganov, Y. V. Krylov, and Y. L. Yupinov, “Energy Ramping at Siberia-2”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper WEPPD008, pp. 581-583. 
[n]	U. Y. Yilmaz, M. G. P. T, and M. J. A. de Beer, “Driving Behavioural Change of Software Developers in a Global Organisation Assisted by a Paranoid Android”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 25-29. doi:10.18429/JACoW-ICALEPCS2023-MO2BCO01
[n]	D. Rees, M. Lynch, A. Regan, and A. Reass, “The Spallation Neutron Source (SNS) Linac RF System”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper THE01, pp. 965-967. 
[n]	E. Naselli et al., “A novel test-facility for ECRIS plasma diagnostics: optical spectroscopy, X-ray imaging and spectroscopy, mm-wave polarimetry”, presented at the ECRIS'24, Darmstadt, Germany, Sep. 2024, paper TUD2, unpublished. 
[n]	W. A. Frank, B. R. Aljamal, and R. A. Washington, “Digitisation of the Analogue Waveform System at ISIS”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 169-172. doi:10.18429/JACoW-ICALEPCS2021-MOPV020
[n]	M. Fawley, “High Order Calculation of the Multipole Content of Three Dimensional Electrostatic Geometrics”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 3020-3023. 
[n]	V. I. Pershin et al., “Metal-Vapor Vacuum-Arc Ion Source with An Additional Anode”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TH434, pp. 677-679. 
[n]	W. Hartung et al., “20 MV/m Accelerating Gradient with Heat Treatment of a Six Cell, 1.5 GHz Cavity for TESLA”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 921-924. 
[n]	G. A. Karamysheva, Yu. N. Denisov, and O. Karamyshev, “Acceleration of Low Charge Krypton Ions in the CYTRACK Cyclotron”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper WEPPD041, pp. 632-634. 
[n]	C. Su, X. Chen, and Z. Wang, “Reinforcement learning-based beam tuning for CiADS room temperature front-end prototype”, presented at the LINAC'24, Chicago, IL, USA, Aug. 2024, paper TUPB056, unpublished. 
[n]	T. Knuth, D. Krämer, E. Weihreter, I. Chertok, S. Michailov, and B. Sukhina, “The Magnet System for the BESSY II Injector Synchrotron”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPE09, pp. 1316-1318. 
[n]	S. L. Andrianov, M. F. Moisio, and C. R. Roncolato, “The First Design of Medium Resolution Mass Spectrometer (MRMS) High Voltage Platform in a SPES Project”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper TUPSA27, pp. 94-96. 
[n]	X. R. Resende, M. B. Alves, L. Liu, A. C. S. Oliveira, J. V. Quentino, and F. H. de S?í, “Sirius Injection Optimization”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2672-2674. doi:10.18429/JACoW-IPAC2022-THPOPT038
[n]	N. A. Wilkinson and D. Dohan, “Synchronous Message-Based Communication for Distributed Heterogeneous Systems”, in Proc. ICALEPCS'91, Tsukuba, Japan, Nov. 1991, pp. 302-305. doi:10.18429/JACoW-ICALEPCS1991-S08NC04
[n]	M. Slupecki, “Future challenges for CERN’s ion injector complex”, in Proc. HIAT'25, East Lansing, MI, USA, Jun. 2025, pp. 68-73. doi:10.18429/JACoW-HIAT2025-TUX01
[n]	T. Kondoh, S. Tagawa, J. Yang, and Y. Yoshida, “Electron Beam Pulse Processing toward the Intensity Modified Radiation Therapy (IMRT)”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH172, pp. 2334-2336. 
[n]	H. Padamsee, J. Kirchgessner, P. Barnes, D. Metzger, and A. Helser, “Test Results and Design Considerations for a 500 MHz, 500 kW Vacuum Window for CESR-B”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1399-1402. 
[n]	D. Rees and W. Roybal, “Collector Failures on 350-MHz, 1.2-MW CW Klystrons at the Low-Energy Demonstration Accelerator (LEDA)”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper THE12, pp. 998-1000. 
[n]	X. Liu et al., “Optical cavity status for SSMB at Tsinghua”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper TUPG71, unpublished. 
[n]	C. Hovjat, M. Joy, and R. C. Webber, “Stripping Foils for Multiturn Charge Exchange Injection into the Fermilab Booster”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 4009-4012. 
[n]	M. Yi, Z. Wang, and S. Liu, “Beam dynamics design of the superconductiong section of a 100 mA superconducting linac”, presented at the HIAT'25, East Lansing, MI, USA, Jun. 2025, paper WEP22, unpublished. 
[n]	M. Luong, B. Bonin, H. Long, and H. Safa, “Role of Adsorbates on Current Fluctuations in DC Field Emission”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper SRF95C27, pp. 509-511. 
[n]	J. Cheng et al., “Initial Operation of a High Power, K-Band, Harmonic Gyroklystron for Accelerator Applications”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2667-2670. 
[n]	S. R. Marques et al., “Improvements on Sirius Beam Stability”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 226-229. doi:10.18429/JACoW-IPAC2022-MOPOPT002
[n]	S. Richter et al., “New compact modular in-vacuum undulators for SLS 2.0”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper TUPM069, unpublished. 
[n]	A. Sen, S. Brandenburg, M. A. Hofstee, and M. J. van Goethem, “Vacuum Simulation for Heavy Ion Beams in the AGOR-Cyclotron”, in Proc. Cyclotrons'10, Lanzhou, China, Sep. 2010, paper MOPCP083, pp. 221-223. 
[n]	G. K. Deyu, R. H. Blick, I. González Díaz-Palacio, W. Hillert, M. Wenskat, and R. Zierold, “Successful Al₂O₃ Coating of Superconducting Niobium Cavities by Thermal ALD”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 104-108. doi:10.18429/JACoW-SRF2023-MOPMB016
[n]	S. Richter et al., “First magnetic experience with APPLE X knot undulators for SLS 2.0”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1315-1318. doi:10.18429/JACoW-IPAC2025-TUPM068
[n]	P. Kruyt, D. Gamba, and G. Franchetti, “Measurements and simulations of the e-cooling performance in ELENA”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 836-839. doi:10.18429/JACoW-IPAC2024-MOPS51

For LaTeX

Use Complete Form

For BibTeX

References

Back to search