Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] A. Caruette, M. Fouaidy, T. Junquera, A. Le Goff, J. Lesrel, and S. Maissa, “Field Emission Investigation in a SCRF Cavity Contaminated with Alumina Particles”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP044L, pp. 2115-2117.
[n] E. Nebot Del Busto et al., “Measurement of Beam Losses Using Optical Fibers at the Australian Synchrotron”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper WECZB3, pp. 515-520.
[n] N. S. Ginzburg et al., “Production of Powerful Spatially Coherent Radiation in Free Electron Lasers Based on Two-Dimensional Distributed Feedback”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper TUOD04, pp. 455-458.
[n] M. F. Fernandes, J. Tan, and C. P. Welsch, “A Cryogenic Current Comparator for the Low Energy Antiproton Facitities at CERN”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper WEPF04, pp. 530-535.
[n] K. Balewski, W. Brefeld, W. Decking, Y. L. Li, G. K. Sahoo, and R. Wanzenberg, “PETRA III: A New High Brilliance Synchrotron Radiation Source at DESY”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPKF019, pp. 2302-2304.
[n] P. Bellomo et al., “SPEAR 3 DC Magnet Power Supplies - An Overview”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOP10004, pp. XX-XX.
[n] C. Antoine et al., “A New Fabrication and Stiffening Method of SRF Cavities”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP01D, pp. 1849-1851.
[n] S. Sierra, C. Lievin, P. Rouillon, H. Guler, W. Kaabi, and A. Verguet, “Automatic RF Conditioning Test Bench of Fundamental Power Couplers for the European XFEL Accelerator”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper THPB095, pp. 1367-1369.
[n] J. L. Boles, L. Ahle, S. Reyes, and W. Stein, “Neutronics Assessments for a RIA Fragmentation Line Beam Dump Concept”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAE053, pp. 3227-3229.
[n] M. Hostettler and G. Papotti, “Luminosity Lifetime at the LHC in 2012 Proton Physics Operation”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPFI029, pp. 1403-1405.
[n] M. Krasilnikov et al., “Recent Developments at PITZ”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAP006, pp. 1012-1014.
[n] M. K. Craddock, G. H. Mackenzie, and P. W. Schmor, “Depolarization of H- Ions in the TRIUMF Cyclotron”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper EP-22, pp. 457-460.
[n] M. Platz et al., “Latest Developments at the S-DALINAC”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPRI111, pp. 2700-2702.
[n] S. O. Schriber, “50th Anniversary: Accelerator Conferences in the U.S.”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3668-3672. doi:10.18429/JACoW-IPAC2015-THSMS2
[n] H. Sakaki et al., “Calculation of Radiation Shielding for Laser-driven Hadron Beams Therapeutic Instrument”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEA015, pp. 94-96.
[n] J. E. Griffin, J. F. Bridges, and J. A. MacLachlan, “Review of the Fermilab Main Ring Accelerator Study Program as Directed to the PPbar Program”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2040-2043.
[n] A. M. Sessler, “Collective Phenomena in Accelerators”, in Proc. LINAC'72, Los Alamos, NM, USA, Oct. 1972, paper K02, pp. 291-299.
[n] F. Naito, T. Kato, E. Takasaki, and Y. Yamazaki, “Development of the DTL for the JHP”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TH439, pp. 695-697.
[n] S. N. Sedykh et al., “Experiment on RF Heating of the Copper Cavity - the Imitator of the CLIC High-Gradient Accelerating Structure”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper TUPSA006, pp. 47-49.
[n] A. Batrakov et al., “Beam Position Monitor with the Digital Signal Processing”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP008L, pp. 1579-1581.
[n] T. Junquera et al., “Study of Luminous Spots Observed on Metallic Surfaces Subjected to High RF Fields”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPP09, pp. 1632-1635.
[n] C. Fortgang et al., “Longitudinal Beam Dynamics of a 5 MeV DTL - A Comparison of Theory and Experiment”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper MO3-48, pp. 167-169.
[n] S. Liu et al., “Generation and Acceleration of High Brightness Electron Bunch Train in ATF of KEK”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAN038, pp. 3312-3314.
[n] M. Hostettler, K. Fuchsberger, and G. Papotti, “Operational Experience with Luminosity Scans for Beam Size Estimation in 2016 LHC Proton Physics Operation”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 374-376. doi:10.18429/JACoW-IPAC2017-MOPAB109
[n] H. Gassot and C. Commeaux, “Simulations for Mechanical Design of Nozzle for Extrude of Windowless Solid Hydrogen Cryogenic Target”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPFI005, pp. 3297-3299.
[n] S. O. Schriber, “Preliminary Design Study of a 60 MeV CW Electron Accelerator Using a Conventional Standing Wave Linac”, in Proc. LINAC'76, Chalk River, Canada, Sep. 1976, paper PUB12, pp. 405-408.
[n] J. P. Schapira, R. Brizzi, and A. Le Goff, “AGOR Central Region Design”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper F6-02, pp. 335-338.
[n] N. Li et al., “SPEAR3 Gradient Dipole Core Fabrication”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAB061, pp. 2174-2176.
[n] V. Tympel et al., “Creation of the First High-Inductance Sensor of the New CCC-Sm Series”, in Proc. IBIC'22, Kraków, Poland, Sep. 2022, pp. 469-472. doi:10.18429/JACoW-IBIC2022-WEP30
[n] M. Tilmont et al., “Cryo-Ready Undulator U15: Passing SOLEIL's 2 Meters Threshold in Useful Magnetic Length”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 249-250. doi:10.18429/JACoW-MEDSI2016-TUPE40
[n] W. A. Reass et al., “Design, Status, and First Operations of the Spallation Neutron Source Polyphase Resonant Converter Modulator System”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper ROAC007, pp. 553-557.
[n] R. D?Âlling, “Beam Diagnostics for Cyclotrons”, in Proc. Cyclotrons'10, Lanzhou, China, Sep. 2010, paper WEM2CIO04, pp. 344-350.
[n] F. Naito et al., “New Engineering Techniques used in a High-Power Model of the 432 MHz DTL”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper MO-36, pp. 134-136.
[n] E. Zimoch et al., “SwissFEL Control System - Overview, Status, and Lessons Learned”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 19-21. doi:10.18429/JACoW-ICALEPCS2017-MOAPL04
[n] A. Schmidt, R. Bandelmann, H. Brueck, A. Matheisen, and J. Schaffran, “Studies on Transportation of Superconducting Resonators and Beam Position Monitors - Quadrupol Units for the XFEL Project”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper TUPO050, pp. 504-507.
For LaTeX
Use Complete Form
For BibTeX
References
- A. Caruette, M. Fouaidy, T. Junquera, A. Le Goff, J. Lesrel, and S. Maissa, “Field Emission Investigation in a SCRF Cavity Contaminated with Alumina Particles”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP044L, pp. 2115-2117.
- E. Nebot Del Busto et al., “Measurement of Beam Losses Using Optical Fibers at the Australian Synchrotron”, in Proc. 3rd Int. Beam Instrumentation Conf. (IBIC'14), Monterey, CA, USA, Sep. 2014, paper WECZB3, pp. 515-520.
- N. S. Ginzburg et al., “Production of Powerful Spatially Coherent Radiation in Free Electron Lasers Based on Two-Dimensional Distributed Feedback”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper TUOD04, pp. 455-458.
- M. F. Fernandes, J. Tan, and C. P. Welsch, “A Cryogenic Current Comparator for the Low Energy Antiproton Facitities at CERN”, in Proc. 3rd Int. Beam Instrumentation Conf. (IBIC'14), Monterey, CA, USA, Sep. 2014, paper WEPF04, pp. 530-535.
- K. Balewski, W. Brefeld, W. Decking, Y. L. Li, G. K. Sahoo, and R. Wanzenberg, “PETRA III: A New High Brilliance Synchrotron Radiation Source at DESY”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPKF019, pp. 2302-2304.
- P. Bellomo et al., “SPEAR 3 DC Magnet Power Supplies - An Overview”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper MOP10004, pp. XX-XX.
- C. Antoine et al., “A New Fabrication and Stiffening Method of SRF Cavities”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP01D, pp. 1849-1851.
- S. Sierra, C. Lievin, P. Rouillon, H. Guler, W. Kaabi, and A. Verguet, “Automatic RF Conditioning Test Bench of Fundamental Power Couplers for the European XFEL Accelerator”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper THPB095, pp. 1367-1369.
- J. L. Boles, L. Ahle, S. Reyes, and W. Stein, “Neutronics Assessments for a RIA Fragmentation Line Beam Dump Concept”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAE053, pp. 3227-3229.
- M. Hostettler and G. Papotti, “Luminosity Lifetime at the LHC in 2012 Proton Physics Operation”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPFI029, pp. 1403-1405.
- M. Krasilnikov et al., “Recent Developments at PITZ”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAP006, pp. 1012-1014.
- M. K. Craddock, G. H. Mackenzie, and P. W. Schmor, “Depolarization of H- Ions in the TRIUMF Cyclotron”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper EP-22, pp. 457-460.
- M. Platz et al., “Latest Developments at the S-DALINAC”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPRI111, pp. 2700-2702.
- S. O. Schriber, “50th Anniversary: Accelerator Conferences in the U.S.”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3668-3672.
- H. Sakaki et al., “Calculation of Radiation Shielding for Laser-driven Hadron Beams Therapeutic Instrument”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEA015, pp. 94-96.
- J. E. Griffin, J. F. Bridges, and J. A. MacLachlan, “Review of the Fermilab Main Ring Accelerator Study Program as Directed to the PPbar Program”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2040-2043.
- A. M. Sessler, “Collective Phenomena in Accelerators”, in Proc. 1972 Proton Linear Accelerator Conf. (LINAC'72), Los Alamos, NM, USA, Oct. 1972, paper K02, pp. 291-299.
- F. Naito, T. Kato, E. Takasaki, and Y. Yamazaki, “Development of the DTL for the JHP”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TH439, pp. 695-697.
- S. N. Sedykh et al., “Experiment on RF Heating of the Copper Cavity - the Imitator of the CLIC High-Gradient Accelerating Structure”, in Proc. 22nd Russian Particle Accelerator Conf. (RuPAC'10), Protvino, Russia, Sep.-Oct. 2010, paper TUPSA006, pp. 47-49.
- A. Batrakov et al., “Beam Position Monitor with the Digital Signal Processing”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP008L, pp. 1579-1581.
- T. Junquera et al., “Study of Luminous Spots Observed on Metallic Surfaces Subjected to High RF Fields”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TPP09, pp. 1632-1635.
- C. Fortgang et al., “Longitudinal Beam Dynamics of a 5 MeV DTL - A Comparison of Theory and Experiment”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper MO3-48, pp. 167-169.
- S. Liu et al., “Generation and Acceleration of High Brightness Electron Bunch Train in ATF of KEK”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPAN038, pp. 3312-3314.
- M. Hostettler, K. Fuchsberger, and G. Papotti, “Operational Experience with Luminosity Scans for Beam Size Estimation in 2016 LHC Proton Physics Operation”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 374-376.
- H. Gassot and C. Commeaux, “Simulations for Mechanical Design of Nozzle for Extrude of Windowless Solid Hydrogen Cryogenic Target”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPFI005, pp. 3297-3299.
- S. O. Schriber, “Preliminary Design Study of a 60 MeV CW Electron Accelerator Using a Conventional Standing Wave Linac”, in Proc. 1976 Proton Linear Accelerator Conf. (LINAC'76), Chalk River, Canada, Sep. 1976, paper PUB12, pp. 405-408.
- J. P. Schapira, R. Brizzi, and A. Le Goff, “AGOR Central Region Design”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper F6-02, pp. 335-338.
- N. Li et al., “SPEAR3 Gradient Dipole Core Fabrication”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPAB061, pp. 2174-2176.
- V. Tympel et al., “Creation of the First High-Inductance Sensor of the New CCC-Sm Series”, in Proc. 11th Int. Beam Instrumentation Conference (IBIC'22), Kraków, Poland, Sep. 2022, pp. 469-472.
- M. Tilmont et al., “Cryo-Ready Undulator U15: Passing SOLEIL's 2 Meters Threshold in Useful Magnetic Length”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 249-250.
- W. A. Reass et al., “Design, Status, and First Operations of the Spallation Neutron Source Polyphase Resonant Converter Modulator System”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper ROAC007, pp. 553-557.
- R. D?Âlling, “Beam Diagnostics for Cyclotrons”, in Proc. 19th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'10), Lanzhou, China, Sep. 2010, paper WEM2CIO04, pp. 344-350.
- F. Naito et al., “New Engineering Techniques used in a High-Power Model of the 432 MHz DTL”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper MO-36, pp. 134-136.
- E. Zimoch et al., “SwissFEL Control System - Overview, Status, and Lessons Learned”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 19-21.
- A. Schmidt, R. Bandelmann, H. Brueck, A. Matheisen, and J. Schaffran, “Studies on Transportation of Superconducting Resonators and Beam Position Monitors - Quadrupol Units for the XFEL Project”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper TUPO050, pp. 504-507.
Back to search