Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] T. Kuerzeder, M. Arnold, L. E. Juergensen, J. Pforr, N. Pietralla, and F. Hug, “Beam Break-up Measurements at the Recirculating Electron Accelerator S-DALINAC”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1714-1716. doi:10.18429/JACoW-IPAC2016-TUPOR025
[n] P. A. Zavodszky, “INNOVATI VE DESIGN PRINCIPLES OF SUSI ÔÇô SUPERCONDUCTING?SOURCE FOR IONS AT NSCL/MSU”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 20B4, pp. XX-XX.
[n] A. J. Gonsalves et al., “Multi-GeV Plasma Acceleration Results at BELLA”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1319-1324. doi:10.18429/JACoW-IPAC2015-TUYC2
[n] G. Riddone et al., “Technical Specification for the CLIC Two-Beam Module”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP028, pp. 607-609.
[n] S. Bauer, M. Pekeler, W. Anders, J. Knobloch, and W.-D. M?Âller, “Vertical and Horizontal Test Results of TESLA Cavities for BESSY”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper TUP13, pp. 267-267.
[n] B. L. Bures et al., “X-ray Pole Figure Analysis on Fiber Textured Epitaxial Niobium Films for SRF Cavities”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper TUPPO080, pp. 418-421.
[n] M. Dach et al., “First Operational Experience with the Digital Beam Position Monitoring System for the Swiss Light Source”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP4A16, pp. 1809-1811.
[n] H. A. Day, M. J. Barnes, and L. M. C. Feliciano, “Impedance Studies of the LHC Injection Kicker Magnets for HL-LHC”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 370-373. doi:10.18429/JACoW-IPAC2015-MOPJE038
[n] J. Bahrdt et al., “Measurements of the Lattice Modifications for the Cryogenic Undulator CPMU17”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 4031-4034. doi:10.18429/JACoW-IPAC2016-THPOW039
[n] G. I. Cancelo et al., “Analysis of DESY-FLASH LLRF Measurements for the ILC Heavy Beam Loading Test”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5PFP077, pp. 2189-2191.
[n] A. Kosicek, P. Leban, and K. B. Scheidt, “Beam Lifetime Measurements with Libera Brilliance”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper TUPSM063, pp. 311-314.
[n] Y. Alexahin, E. Gianfelice-Wendt, and W. L. Marsh, “Tune Evaluation from Phased BPM Turn-by-turn Data”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE084, pp. 1179-1181.
[n] E. Matias, D. Beauregard, R. Berg, D. Chabot, T. Wilson, and G. Wright, “The Canadian Light Source Control System - A Case Study in the Use of Single Board Computers and Industrial PC Equipment for Synchrotron Control”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper WEZ02, pp. 157-158.
[n] E. Barbero et al., “Accuracy Of The LEP Spectrometer Beam Orbit Monitors”, in Proc. DIPAC'01, Grenoble, France, May 2001, paper PM03, pp. XX-XX.
For LaTeX
Use Complete Form
For BibTeX
References
- T. Kuerzeder, M. Arnold, L. E. Juergensen, J. Pforr, N. Pietralla, and F. Hug, “Beam Break-up Measurements at the Recirculating Electron Accelerator S-DALINAC”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1714-1716.
- P. A. Zavodszky, “INNOVATI VE DESIGN PRINCIPLES OF SUSI ÔÇô SUPERCONDUCTING?SOURCE FOR IONS AT NSCL/MSU”, in Proc. 17th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'04), Tokyo, Japan, Oct. 2004, paper 20B4, pp. XX-XX.
- A. J. Gonsalves et al., “Multi-GeV Plasma Acceleration Results at BELLA”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1319-1324.
- G. Riddone et al., “Technical Specification for the CLIC Two-Beam Module”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP028, pp. 607-609.
- S. Bauer, M. Pekeler, W. Anders, J. Knobloch, and W.-D. M?Âller, “Vertical and Horizontal Test Results of TESLA Cavities for BESSY”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper TUP13, pp. 267-267.
- B. L. Bures et al., “X-ray Pole Figure Analysis on Fiber Textured Epitaxial Niobium Films for SRF Cavities”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper TUPPO080, pp. 418-421.
- M. Dach et al., “First Operational Experience with the Digital Beam Position Monitoring System for the Swiss Light Source”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP4A16, pp. 1809-1811.
- H. A. Day, M. J. Barnes, and L. M. C. Feliciano, “Impedance Studies of the LHC Injection Kicker Magnets for HL-LHC”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 370-373.
- J. Bahrdt et al., “Measurements of the Lattice Modifications for the Cryogenic Undulator CPMU17”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 4031-4034.
- G. I. Cancelo et al., “Analysis of DESY-FLASH LLRF Measurements for the ILC Heavy Beam Loading Test”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5PFP077, pp. 2189-2191.
- A. Kosicek, P. Leban, and K. B. Scheidt, “Beam Lifetime Measurements with Libera Brilliance”, in Proc. 14th Beam Instrumentation Workshop (BIW'10), Santa Fe, NM, USA, May 2010, paper TUPSM063, pp. 311-314.
- Y. Alexahin, E. Gianfelice-Wendt, and W. L. Marsh, “Tune Evaluation from Phased BPM Turn-by-turn Data”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPE084, pp. 1179-1181.
- E. Matias, D. Beauregard, R. Berg, D. Chabot, T. Wilson, and G. Wright, “The Canadian Light Source Control System - A Case Study in the Use of Single Board Computers and Industrial PC Equipment for Synchrotron Control”, in Proc. 7th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'08), Ljbuljana, Slovenia, Oct. 2008, paper WEZ02, pp. 157-158.
- E. Barbero et al., “Accuracy Of The LEP Spectrometer Beam Orbit Monitors”, in Proc. 5th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'01), Grenoble, France, May 2001, paper PM03, pp. XX-XX.
Back to search