Favourites
For Word
[n] V. L. Uvarov et al., “Producing Two-photon Planar Sources at an Electron Accelerator”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2192-2194. doi:10.18429/JACoW-IPAC2014-WEPRO098
[n] C. M. Bhat and F. Zimmermann, “LHC Luminosity Upgrade with Large Piwinski Angle Scheme: A Recent Look”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPZ032, pp. 1879-1881.
[n] P. Desire Valdor, A. Gerbershagen, and A. Latina, “Intrabeam scattering simulation with a novel hybrid-kinetic Monte Carlo method for linear accelerators”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 659-662. doi:10.18429/JACoW-LINAC2024-THPB014
[n] P. Walstrom and E. G. Cook, “A 50 kV Solid State Multipulse Kicker Modulator”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper ROAC004, pp. 544-546.
[n] V. L. Uvarov, A. N. Dovbnya, V. I. Nikiforov, and Z. V. Zhiglo, “Optimization of Electron Linac Operating Conditions for Photonuclear Isotope Production”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC106, pp. 1308-1310.
[n] D. Sertore, J. H. Han, P. Michelato, L. Monaco, C. Pagani, and S. Schreiber, “High QE Photocathode at FLASH”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPLS052, pp. 2496-2498.
[n] J. Steimel et al., “Development and Operation of PIP-II Injector Test, SSR1 Cryomodule, 325 MHz Amplifiers”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 245. doi:10.18429/JACoW-SRF2021-MOPTEV017
[n] A. Schnase, F. J. Etzkorn, and H. Meuth, “An RF-Synthesizer for Fundamental and Precisely Adjusted Higher Harmonics”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1963-1966.
[n] V. V. Mytrochenko, M. I. Ayzatskiy, V. A. Kushnir, A. Opanasenko, S. A. Perezhogin, and V. L. Uvarov, “Intra-Bunch Energy Spread of Electrons in Powerful RF Linacs for Nuclear Physics Research”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPS040, pp. 691-693.
[n] L. E. Boon, A. F. Garfinkel, and K. C. Harkay, “Heat Load for the APS Superconducting Undulator”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC186, pp. 3332-3334.
[n] H. H. Li et al., “The Injection System of the SSRF Storage Ring”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC041, pp. 2076-2078.
[n] Y.-J. Chen and A. Paul, “Compact Proton Accelerator for Cancer Therapy”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAS059, pp. 1787-1789.
[n] R. L. Cassel et al., “The Prototype Solid State Induction Modulator for SLAC NLC”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH033, pp. 3744-3746.
[n] A. Hofmann, K. Hubner, and B. Zotter, “A Computer Code for the Calculation of Beam Stability in Circular Electron Machines”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3514-3517.
[n] S. Busold et al., “The LIGHT Beamline at GSI: Shaping Intense MeV Proton Bunches from a Compact Laser-driven Source”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1419-1421. doi:10.18429/JACoW-IPAC2014-TUPME030
[n] F. M. Velotti et al., “Demonstration of Loss Reduction Using a Thin Bent Crystal to Shadow an Electrostatic Septum During Resonant Slow Extraction”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3399-3403. doi:10.18429/JACoW-IPAC2019-THXXPLM2
[n] S. M. Martin and R. D. Hay, “Estimations of Magnetic Field Distributions in Three Dimensions Using a Two Dimensional Computer Program Trimm”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 907-909.
[n] R. Bachimanchi et al., “CEBAF SRF Performance during Initial 12 GeV Commissioning”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3638-3642. doi:10.18429/JACoW-IPAC2015-THXB1
[n] G. Patel, D. E. Anderson, D. J. Solley, and M. Wezensky, “Droop Compensation for the High Voltage Converter Modulators at the Spallation Neutron Source”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPD081, pp. 3704-3706.
[n] M. Lieuvin and A. R. A. Staff, “S.A.R.A. -- A Low Cost Heavy Ion Accelerator for 10 to 40 MeV/A”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2072-2077.
[n] D. Gudkov, S. Lebet, G. Riddone, F. Rossi, and A. Samoshkin, “Experience on Fabrication and Assembly of the First Clic Two-Beam Module Prototype”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPFI055, pp. 2815-2817.
[n] W. Bertram et al., “Vacuum Processing and Control on COSY Beam Lines”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1573-1576.
[n] M. Pont, E. Boter, and M. L. Lopes, “Magnets for the Storage Ring ALBA”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPLS080, pp. 2562-2564.
[n] C. Yao, V. Sajaev, N. Sereno, and H. Shang, “Optimization of the Low-emittance Lattice of the APS Booster Synchrotron”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPP057, pp. 690-692.
[n] H. Li et al., “The Status of CSNS Front End”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 771-773. doi:10.18429/JACoW-LINAC2018-THPO039
[n] S. Posen et al., “Flux Expulsion Variation in SRF Cavities”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper MOPB104, pp. 404-408.
[n] K. McDonald, “Beam Dynamics of a Laser-Driven RF Electron Gun”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper TH2-04, pp. 519-519.
[n] Q. Ji, D. P. Grote, A. R. Lambert, D. Li, T. Schenkel, and J. W. Staples, “Beam Dynamics Studies of H- Beam Chopping in a LEBT for Project X”, in Proc. HB'12, Beijing, China, Sep. 2012, paper THO3B04, pp. 546-549.
[n] V. L. Uvarov et al., “Two-channel Mode of Mo-99 Production at an Electron Accelerator”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPS083, pp. 3627-3629.
[n] C. M. Baffes, M. D. Church, J. R. Leibfritz, S. A. Oplt, and I. L. Rakhno, “Mechanical Design of a High Energy Beam Absorber for the Advanced Superconducting Test Accelerator (ASTA) at Fermilab”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPD034, pp. 2582-2584.
[n] B. Puccio, A. Casta??eda, M. Kwiatkowski, I. Romera, and B. Todd, “The CERN Beam Interlock System: Principle and Operational Experience”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEB073, pp. 2866-2868.
[n] M. Roth et al., “Breaking the 70 MeV Proton Energy Threshold in Laser Proton Acceleration and Guiding Beams to Applications”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1886-1889. doi:10.18429/JACoW-IPAC2014-WEXB01
[n] R. S. Mao et al., “Detectors for Slowly Extracted Ions in HIRFL-CSR”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper TUPB21, pp. 211-212.
[n] R. L. Lillestol, S. Doebert, M. Olvegaard, A. Rabiller, G. Sterbini, and E. Adli, “Experimental Verification of the CLIC Decelerator with theTest Beam Line in the CLIC Test Facility 3”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR031, pp. 1885-1887.
[n] B. R. Poole, D. T. Blackfield, and S. D. Nelson, “Particle Simulations of a Linear Proton Dielectric Wall Accelerator”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAS060, pp. 1790-1792.
[n] J. W. Angle, G. V. Eremeev, M. J. Kelley, U. Pudasaini, C. E. Reece, and J. Tuggle, “Crystallographic Characterization of Nb?Sn Coatings and N-Doped Niobium via EBSD and SIMS”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 871-875. doi:10.18429/JACoW-SRF2019-THP017
[n] J. A. Watson et al., “A Solid-State Modulator for High Speed Kickers”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH031, pp. 3738-3740.
[n] D. T. Blackfield, Y.-J. Chen, J. R. Harris, S. D. Nelson, A. Paul, and B. R. Poole, “Injector Particle Simulation and Beam Transport in a Compact Linear Proton Accelerator”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAS057, pp. 1781-1783.
[n] G. K. Brunton et al., “Shot Rate Improvement Strive for the National Ignition Facility (NIF)”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 56-59. doi:10.18429/JACoW-ICALEPCS2015-MOD3O03
[n] B. Biswas, S. Krishnagopal, A. Kumar, S. Lal, and K. K. Pant, “Thermal Simulations of a Photocathode R.F. Gun”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper WEPMA112, pp. 482-484.
[n] M. Olvegaard, T. J. C. Ekel?Âf, J. M. Y. Ruber, V. G. Ziemann, and J.-P. Koutchouk, “On the Suitability of a Solenoid Horn for the ESS Neutrino Superbeam”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3873-3875. doi:10.18429/JACoW-IPAC2015-THPF081
[n] E. I. Simakov et al., “Experimental Study of Wakefields in an X-band Photonic Band Gap Accelerating Structure”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2689-2691. doi:10.18429/JACoW-IPAC2015-WEPJE008
[n] G. Shvets, N. J. Fisch, A. Pukhov, and J. Meyer-ter-Vehn, “Generation of Phase-Controlled Accelerating Structures in Plasma”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA126, pp. 3675-3677.
[n] L. Leduc, G. Corti, and R. Veness, “Design of a Highly Optimised Vacuum Chamber Support for the LHCb Experiment”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPS025, pp. 1581-1583.
[n] K. X. Gu, X. Chen, T. M. Huang, Q. Ma, and W. M. Pan, “Design and Simulation of High Power Input Coupler for C-ADS Linac 5-Cell Elliptical Cavities”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper THPB087, pp. 1343-1345.
[n] J. Staples, S. M. Lidia, R. A. Rimmer, and S. Virostek, “The LBNL Femtosource 10 kHz Photoinjector”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAB023, pp. 2092-2094.
[n] J. Dolique, “Wakefield Driven by the Strongly Accelerated Beam of an RF Photoinjector”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1306-1309.
[n] R. C. Davidson, H. Qin, and G. Shvets, “Instability Driven by Wall Impedance in Intense Charged Particle Beams”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPPB051, pp. 3117-3119.
[n] G. Chen et al., “Research and Development of RF System for SC200 Cyclotron”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3616-3618. doi:10.18429/JACoW-IPAC2018-THPAL004
[n] G. Marcus et al., “Regenerative Amplification for a Hard X-Ray Free-Electron Laser”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 118-121. doi:10.18429/JACoW-FEL2019-TUP032
[n] P. Di Marcantonio, R. Cirami, I. Coretti, G. Chiozzi, and M. Kiekebusch, “Evaluation of Software and Electronics Technologies for the Control of the E-ELT Instruments: a Case Study”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPKS025, pp. 844-847.
[n] C. Hovater et al., “Operational Experience With CW High Gradient and High QL Cryomodules”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper THIOC03, pp. 834-838.
[n] C. Johnstone et al., “A Proposed 100-400 MeV Beam Facility at Fermilab”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAG06, pp. 86-88.
[n] Z. Wang et al., “Progress on Coupled RFQ-SFRFQ Accelerator for Materials Irradiation Research”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPC013, pp. 3302-3304.
[n] X. W. Wu, H. B. Chen, L. Zhang, N. Catalan-Lasheras, B. J. Woolley, and W. Wuensch, “Calorimetric Power Measurements in X-band High Power RF”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2967-2969. doi:10.18429/JACoW-IPAC2015-WEPMN019
[n] M. Yamamoto et al., “Longitudinal Particle Simulation for J-PARC RCS”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5PFP028, pp. 3254-3256.
[n] Y. Bao, C. Blume, A. Caldwell, and D. Greenwald, “Frictional Cooling Demonstration at MPP”, in Proc. COOL'09, Lanzhou, China, Aug.-Sep. 2009, paper TUM1MCCO03, pp. 55-58.
[n] Y. W. An et al., “The Operation Status of CSNS Front End”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2024-2026. doi:10.18429/JACoW-IPAC2019-TUPTS038
[n] M. Znidarcic and M. Cargnelutti, “Compact Beam Position Monitor for Electron and Proton Machines”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 161-164. doi:10.18429/JACoW-LINAC2016-MOPLR012
[n] L. Tkachenko et al., “Dipole with Coil Based on High Temperature Superconductor”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH309, pp. 3624-3626.
[n] T. Winkelmann, R. Cee, Th. Haberer, B. Naas, A. Peters, and S. Scheloske, “Experience at the Ion Beam Therapy Center (HIT) with 2 Years of Continuous ECR Ion Source Operation”, in Proc. ECRIS'08, Chicago, IL, USA, Sep. 2008, paper MOPO-10, pp. 86-88.
[n] C. Steier et al., “Status of the Low Emittance Upgrade of the Advanced Light Source”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEA070, pp. 2645-2647.
[n] C. M. Bhat, “A New Beam Injection Scheme for the Fermilab Booster”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3976-3978. doi:10.18429/JACoW-IPAC2015-THPF112
[n] V. V. Mytrochenko et al., “Performance of Compact Electron Injector on Evanescent Oscillations”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP100, pp. 790-792.
[n] T. Kobilarcik, J. DeVoy, and C. Moore, “Automatic Beamline Correction”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAG020, pp. 2934-2935.
[n] L. Monaco, P. Michelato, C. Pagani, and N. Panzeri, “Experimental and Theoretical Analysis of the Tesla-like SRF Cavity Flanges”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH170, pp. 463-465.
[n] Y.-J. Chen, D. T. Blackfield, S. D. Nelson, and B. R. Poole, “Beam Transport in a Dielectric Wall Accelerator for Intensity Modulated Proton Therapy”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC043, pp. 2106-2108.
[n] S. Lal et al., “Development and Commissioning of the CUTE-FEL Injector”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEC005, pp. 1716-1718.
[n] S. Karabekyan, S. Abeghyan, J. Pflueger, and M. Yakopov, “Experience Gained during the Commissioning of the Undulator Control System at the European XFEL”, in Proc. PCaPAC'16, Campinas, Brazil, Oct. 2016, pp. 148-150. doi:10.18429/JACoW-PCAPAC2016-FRITPLCO04
[n] T. Houck, M. Garcia, and S. Sampayan, “Faraday Cup Measurements of the Plasma Plume Produced at an X-ray Converter”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper MO4102, pp. 311-313.
[n] S. Pei, X. Li, H. F. Ouyang, and J. R. Zhang, “325 MHz CW Room Temperature High Power Bunching Cavity for the China ADS MEBT1”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper THPB025, pp. 903-905.
[n] R. Joshel, S. Childress, C. Crawford, W. Kissel, and S. Lackey, “Automated Beam Position and Split Control for the Fermilab Switchyard”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 515-516.
[n] L. Zhang et al., “An X-Band Linac with Tunable Beam Energy”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1644-1646. doi:10.18429/JACoW-IPAC2015-TUPJE014
[n] Y. J. Yuan et al., “Present Status of HIRFL Complex in Lanzhou”, in Proc. HIAT'18, Lanzhou, China, Oct. 2018, pp. 18-22. doi:10.18429/JACoW-HIAT2018-MOZBA01
For LaTeX
Use Complete Form
For BibTeX
References
- V. L. Uvarov et al., “Producing Two-photon Planar Sources at an Electron Accelerator”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2192-2194.
- C. M. Bhat and F. Zimmermann, “LHC Luminosity Upgrade with Large Piwinski Angle Scheme: A Recent Look”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPZ032, pp. 1879-1881.
- P. Desire Valdor, A. Gerbershagen, and A. Latina, “Intrabeam scattering simulation with a novel hybrid-kinetic Monte Carlo method for linear accelerators”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 659-662.
- P. Walstrom and E. G. Cook, “A 50 kV Solid State Multipulse Kicker Modulator”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper ROAC004, pp. 544-546.
- V. L. Uvarov, A. N. Dovbnya, V. I. Nikiforov, and Z. V. Zhiglo, “Optimization of Electron Linac Operating Conditions for Photonuclear Isotope Production”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPC106, pp. 1308-1310.
- D. Sertore, J. H. Han, P. Michelato, L. Monaco, C. Pagani, and S. Schreiber, “High QE Photocathode at FLASH”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPLS052, pp. 2496-2498.
- J. Steimel et al., “Development and Operation of PIP-II Injector Test, SSR1 Cryomodule, 325 MHz Amplifiers”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 245.
- A. Schnase, F. J. Etzkorn, and H. Meuth, “An RF-Synthesizer for Fundamental and Precisely Adjusted Higher Harmonics”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1963-1966.
- V. V. Mytrochenko, M. I. Ayzatskiy, V. A. Kushnir, A. Opanasenko, S. A. Perezhogin, and V. L. Uvarov, “Intra-Bunch Energy Spread of Electrons in Powerful RF Linacs for Nuclear Physics Research”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPS040, pp. 691-693.
- L. E. Boon, A. F. Garfinkel, and K. C. Harkay, “Heat Load for the APS Superconducting Undulator”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPC186, pp. 3332-3334.
- H. H. Li et al., “The Injection System of the SSRF Storage Ring”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC041, pp. 2076-2078.
- Y.-J. Chen and A. Paul, “Compact Proton Accelerator for Cancer Therapy”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAS059, pp. 1787-1789.
- R. L. Cassel et al., “The Prototype Solid State Induction Modulator for SLAC NLC”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FPAH033, pp. 3744-3746.
- A. Hofmann, K. Hubner, and B. Zotter, “A Computer Code for the Calculation of Beam Stability in Circular Electron Machines”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3514-3517.
- S. Busold et al., “The LIGHT Beamline at GSI: Shaping Intense MeV Proton Bunches from a Compact Laser-driven Source”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1419-1421.
- F. M. Velotti et al., “Demonstration of Loss Reduction Using a Thin Bent Crystal to Shadow an Electrostatic Septum During Resonant Slow Extraction”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3399-3403.
- S. M. Martin and R. D. Hay, “Estimations of Magnetic Field Distributions in Three Dimensions Using a Two Dimensional Computer Program Trimm”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 907-909.
- R. Bachimanchi et al., “CEBAF SRF Performance during Initial 12 GeV Commissioning”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3638-3642.
- G. Patel, D. E. Anderson, D. J. Solley, and M. Wezensky, “Droop Compensation for the High Voltage Converter Modulators at the Spallation Neutron Source”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPD081, pp. 3704-3706.
- M. Lieuvin and A. R. A. Staff, “S.A.R.A. -- A Low Cost Heavy Ion Accelerator for 10 to 40 MeV/A”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2072-2077.
- D. Gudkov, S. Lebet, G. Riddone, F. Rossi, and A. Samoshkin, “Experience on Fabrication and Assembly of the First Clic Two-Beam Module Prototype”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPFI055, pp. 2815-2817.
- W. Bertram et al., “Vacuum Processing and Control on COSY Beam Lines”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1573-1576.
- M. Pont, E. Boter, and M. L. Lopes, “Magnets for the Storage Ring ALBA”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPLS080, pp. 2562-2564.
- C. Yao, V. Sajaev, N. Sereno, and H. Shang, “Optimization of the Low-emittance Lattice of the APS Booster Synchrotron”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPP057, pp. 690-692.
- H. Li et al., “The Status of CSNS Front End”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 771-773.
- S. Posen et al., “Flux Expulsion Variation in SRF Cavities”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper MOPB104, pp. 404-408.
- K. McDonald, “Beam Dynamics of a Laser-Driven RF Electron Gun”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper TH2-04, pp. 519-519.
- Q. Ji, D. P. Grote, A. R. Lambert, D. Li, T. Schenkel, and J. W. Staples, “Beam Dynamics Studies of H- Beam Chopping in a LEBT for Project X”, in Proc. 52nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'12), Beijing, China, Sep. 2012, paper THO3B04, pp. 546-549.
- V. L. Uvarov et al., “Two-channel Mode of Mo-99 Production at an Electron Accelerator”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPS083, pp. 3627-3629.
- C. M. Baffes, M. D. Church, J. R. Leibfritz, S. A. Oplt, and I. L. Rakhno, “Mechanical Design of a High Energy Beam Absorber for the Advanced Superconducting Test Accelerator (ASTA) at Fermilab”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPD034, pp. 2582-2584.
- B. Puccio, A. Casta??eda, M. Kwiatkowski, I. Romera, and B. Todd, “The CERN Beam Interlock System: Principle and Operational Experience”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEB073, pp. 2866-2868.
- M. Roth et al., “Breaking the 70 MeV Proton Energy Threshold in Laser Proton Acceleration and Guiding Beams to Applications”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1886-1889.
- R. S. Mao et al., “Detectors for Slowly Extracted Ions in HIRFL-CSR”, in Proc. 9th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'09), Basel, Switzerland, May 2009, paper TUPB21, pp. 211-212.
- R. L. Lillestol, S. Doebert, M. Olvegaard, A. Rabiller, G. Sterbini, and E. Adli, “Experimental Verification of the CLIC Decelerator with theTest Beam Line in the CLIC Test Facility 3”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPR031, pp. 1885-1887.
- B. R. Poole, D. T. Blackfield, and S. D. Nelson, “Particle Simulations of a Linear Proton Dielectric Wall Accelerator”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAS060, pp. 1790-1792.
- J. W. Angle, G. V. Eremeev, M. J. Kelley, U. Pudasaini, C. E. Reece, and J. Tuggle, “Crystallographic Characterization of Nb?Sn Coatings and N-Doped Niobium via EBSD and SIMS”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 871-875.
- J. A. Watson et al., “A Solid-State Modulator for High Speed Kickers”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FPAH031, pp. 3738-3740.
- D. T. Blackfield, Y.-J. Chen, J. R. Harris, S. D. Nelson, A. Paul, and B. R. Poole, “Injector Particle Simulation and Beam Transport in a Compact Linear Proton Accelerator”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAS057, pp. 1781-1783.
- G. K. Brunton et al., “Shot Rate Improvement Strive for the National Ignition Facility (NIF)”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 56-59.
- B. Biswas, S. Krishnagopal, A. Kumar, S. Lal, and K. K. Pant, “Thermal Simulations of a Photocathode R.F. Gun”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper WEPMA112, pp. 482-484.
- M. Olvegaard, T. J. C. Ekel?Âf, J. M. Y. Ruber, V. G. Ziemann, and J.-P. Koutchouk, “On the Suitability of a Solenoid Horn for the ESS Neutrino Superbeam”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3873-3875.
- E. I. Simakov et al., “Experimental Study of Wakefields in an X-band Photonic Band Gap Accelerating Structure”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2689-2691.
- G. Shvets, N. J. Fisch, A. Pukhov, and J. Meyer-ter-Vehn, “Generation of Phase-Controlled Accelerating Structures in Plasma”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA126, pp. 3675-3677.
- L. Leduc, G. Corti, and R. Veness, “Design of a Highly Optimised Vacuum Chamber Support for the LHCb Experiment”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPS025, pp. 1581-1583.
- K. X. Gu, X. Chen, T. M. Huang, Q. Ma, and W. M. Pan, “Design and Simulation of High Power Input Coupler for C-ADS Linac 5-Cell Elliptical Cavities”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper THPB087, pp. 1343-1345.
- J. Staples, S. M. Lidia, R. A. Rimmer, and S. Virostek, “The LBNL Femtosource 10 kHz Photoinjector”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPAB023, pp. 2092-2094.
- J. Dolique, “Wakefield Driven by the Strongly Accelerated Beam of an RF Photoinjector”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1306-1309.
- R. C. Davidson, H. Qin, and G. Shvets, “Instability Driven by Wall Impedance in Intense Charged Particle Beams”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPPB051, pp. 3117-3119.
- G. Chen et al., “Research and Development of RF System for SC200 Cyclotron”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3616-3618.
- G. Marcus et al., “Regenerative Amplification for a Hard X-Ray Free-Electron Laser”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 118-121.
- P. Di Marcantonio, R. Cirami, I. Coretti, G. Chiozzi, and M. Kiekebusch, “Evaluation of Software and Electronics Technologies for the Control of the E-ELT Instruments: a Case Study”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPKS025, pp. 844-847.
- C. Hovater et al., “Operational Experience With CW High Gradient and High QL Cryomodules”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper THIOC03, pp. 834-838.
- C. Johnstone et al., “A Proposed 100-400 MeV Beam Facility at Fermilab”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper FAG06, pp. 86-88.
- Z. Wang et al., “Progress on Coupled RFQ-SFRFQ Accelerator for Materials Irradiation Research”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPC013, pp. 3302-3304.
- X. W. Wu, H. B. Chen, L. Zhang, N. Catalan-Lasheras, B. J. Woolley, and W. Wuensch, “Calorimetric Power Measurements in X-band High Power RF”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2967-2969.
- M. Yamamoto et al., “Longitudinal Particle Simulation for J-PARC RCS”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH5PFP028, pp. 3254-3256.
- Y. Bao, C. Blume, A. Caldwell, and D. Greenwald, “Frictional Cooling Demonstration at MPP”, in Proc. 7th Workshop on Beam Cooling and Related Topics (COOL'09), Lanzhou, China, Aug.-Sep. 2009, paper TUM1MCCO03, pp. 55-58.
- Y. W. An et al., “The Operation Status of CSNS Front End”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2024-2026.
- M. Znidarcic and M. Cargnelutti, “Compact Beam Position Monitor for Electron and Proton Machines”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 161-164.
- L. Tkachenko et al., “Dipole with Coil Based on High Temperature Superconductor”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH309, pp. 3624-3626.
- T. Winkelmann, R. Cee, Th. Haberer, B. Naas, A. Peters, and S. Scheloske, “Experience at the Ion Beam Therapy Center (HIT) with 2 Years of Continuous ECR Ion Source Operation”, in Proc. 18th Int. Workshop on ECR Ion Sources (ECRIS'08), Chicago, IL, USA, Sep. 2008, paper MOPO-10, pp. 86-88.
- C. Steier et al., “Status of the Low Emittance Upgrade of the Advanced Light Source”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEA070, pp. 2645-2647.
- C. M. Bhat, “A New Beam Injection Scheme for the Fermilab Booster”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3976-3978.
- V. V. Mytrochenko et al., “Performance of Compact Electron Injector on Evanescent Oscillations”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP100, pp. 790-792.
- T. Kobilarcik, J. DeVoy, and C. Moore, “Automatic Beamline Correction”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPAG020, pp. 2934-2935.
- L. Monaco, P. Michelato, C. Pagani, and N. Panzeri, “Experimental and Theoretical Analysis of the Tesla-like SRF Cavity Flanges”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH170, pp. 463-465.
- Y.-J. Chen, D. T. Blackfield, S. D. Nelson, and B. R. Poole, “Beam Transport in a Dielectric Wall Accelerator for Intensity Modulated Proton Therapy”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPC043, pp. 2106-2108.
- S. Lal et al., “Development and Commissioning of the CUTE-FEL Injector”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEC005, pp. 1716-1718.
- S. Karabekyan, S. Abeghyan, J. Pflueger, and M. Yakopov, “Experience Gained during the Commissioning of the Undulator Control System at the European XFEL”, in Proc. 11th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'16), Campinas, Brazil, Oct. 2016, pp. 148-150.
- T. Houck, M. Garcia, and S. Sampayan, “Faraday Cup Measurements of the Plasma Plume Produced at an X-ray Converter”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper MO4102, pp. 311-313.
- S. Pei, X. Li, H. F. Ouyang, and J. R. Zhang, “325 MHz CW Room Temperature High Power Bunching Cavity for the China ADS MEBT1”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper THPB025, pp. 903-905.
- R. Joshel, S. Childress, C. Crawford, W. Kissel, and S. Lackey, “Automated Beam Position and Split Control for the Fermilab Switchyard”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 515-516.
- L. Zhang et al., “An X-Band Linac with Tunable Beam Energy”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1644-1646.
- Y. J. Yuan et al., “Present Status of HIRFL Complex in Lanzhou”, in Proc. 14th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'18), Lanzhou, China, Oct. 2018, pp. 18-22.
Back to search