JaCoW Logo

Reference Search

Warning
Some papers titles are all uppercase, you must correct this before using this reference.

The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	L. E. Malin et al., “Comparison of Theory, Simulation, and Experiment for Dynamical Extinction of Relativistic Electron Beams Diffracted Through a Si Crystal Membrane”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3924-3927. doi:10.18429/JACoW-IPAC2017-THPAB088
[n]	R. E. Laxdal, Y. Ma, B. Matheson, B. S. Waraich, Z. Y. Yao, and V. Zvyagintsev, “Fundamental Power Coupler Design for a 325 MHz Balloon SSR Cavity”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 252-254. doi:10.18429/JACoW-SRF2019-MOP076
[n]	M. K. Kempkes, M. P. J. Gaudreau, T. H. Hawkey, and K. Schrock, “Solid-State Transmitter for a 2 MW Klystron”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP255, pp. 1304-1306. 
[n]	R. P. Fischer et al., “Generation of Tunable, Monochromatic X-rays in the Laser Synchrotron Source Experiment”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH081, pp. 2644-2646. 
[n]	V. V. Katalev and S. Choroba, “Waveguide Distribution Systems for the European XFEL”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH116, pp. 1286-1288. 
[n]	Y. Zeng et al., “Influence analysis of dipole magnet design and beam collimation in the high-precision energy spectrometry system”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 651-655. doi:10.18429/JACoW-IBIC2025-WEPCO15
[n]	R. Valizadeh et al., “Preparation of the Polycrystalline Copper Photocathodes for the VELA RF Photocathode Gun”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPFI069, pp. 440-442. 
[n]	B. Buonomo, D. G. C. Di Giulio, L. G. Foggetta, and P. Valente, “The Frascati LINAC Beam-Test Facility (BTF) Performance and Upgrades”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 395-398. doi:10.18429/JACoW-IBIC2016-TUPG29
[n]	V. S. Pronskikh, V. Kashikhin, and N. V. Mokhov, “Radiation and Thermal Analysis of Production Solenoid for Mu2e Experimental Setup”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP048, pp. 2208-2210. 
[n]	C. E. Mitchell et al., “RF Injector Beam Dynamics Optimization and Injected Beam Energy Constraints for LCLS-II”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1699-1702. doi:10.18429/JACoW-IPAC2016-TUPOR019
[n]	D. Barna and F. Burkart, “Septum Magnet using a Superconducting Shield”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2402-2404. doi:10.18429/JACoW-IPAC2016-WEPMR056
[n]	F. Wang, W. A. Franklin, C. Tschalaer, D. Wang, and J. van der Laan, “Intrabeam Scattering and Touschek Lifetime for the Optical Stochastic Cooling experiment at the MIT-Bates South Hall Ring”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMS088, pp. 4279-4281. 
[n]	X. Liu, W. Chen, Z. K. Liang, Q. S. Chen, K. F. Liu, and B. Qin, “Design of the Fast Scanning Magnets for HUST Proton Therapy Facility”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 42-44. doi:10.18429/JACoW-Cyclotrons2016-MODM04
[n]	M. Cavellier, W. Beeckman, F. Forest, and J. D. Holzmann, “Turnkey Systems Cost Optimization by Iterative Design of Magnets and Power Supplies”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2239-2240. doi:10.18429/JACoW-IPAC2015-TUPWI001
[n]	T. Obina et al., “Improvement of Photon Factory Advanced Ring Control System”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPE012, pp. 2351-2353. 
[n]	L. Calabretta and D. Rifuggiato, “Status and Future Plans at LNS Catania”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper C-2, pp. XX-XX. 
[n]	Q. Ji, J. W. Kwan, B. A. Ludewigt, and M. J. Regis, “Permanent Magnet Microwave-Driven Ion Source for Neutron Generation”, in Proc. ECRIS'08, Chicago, IL, USA, Sep. 2008, paper MOPO-09, pp. 85-85. 
[n]	S. C. Hutchins, M. Facchini, and E. Tsoulou, “Radiation Tests on Solid State Cameras for Instrumentation”, in Proc. DIPAC'05, Lyon, France, Jun. 2005, paper CTWA02, pp. XX-XX. 
[n]	J. Seeman, “Second-Generation B-Factory Proposals and Lessons Learned from B-Factory Operation”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO3RAI02, pp. 28-32. 
[n]	H. Wu et al., “Control System Integration of the PETRA III BPM System based on Libera Brilliance”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP073, pp. 543-545. 
[n]	X. W. Wu, H. B. Chen, J. Shi, T. Higo, S. Matsumoto, and W. Wuensch, “High Gradient Properties of a CLIC Prototype Accelerating Structure made by Tsinghua University”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3874-3877. doi:10.18429/JACoW-IPAC2016-THPOR041
[n]	T. Ohata et al., “Design of an XFEL Beamline DAQ System”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP017, pp. 438-440. 
[n]	O. K. Kester et al., “Status of the FAIR Accelerator Facility”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2084-2087. doi:10.18429/JACoW-IPAC2014-WEPRO060
[n]	J. Li, J. Feikes, P. Goslawski, and M. Ries, “Particle Swarm Optimization Algorithm Applied in Online Commissioning at the MLS and BESSY II”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3700-3703. doi:10.18429/JACoW-IPAC2017-THPAB008
[n]	B. Feng, V. K. Decyk, C. Huang, T. C. Katsouleas, W. B. Mori, and P. Muggli, “Long Time Electron Cloud Instability Simulation Using QuickPIC With Pipelining Algorithm”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAS055, pp. 3615-3617. 
[n]	I. N. Meshkov, “Beam Cooling, Past, Present and Future”, in Proc. COOL'13, Mürren, Switzerland, Jun. 2013, paper MOAM1HA01, pp. XX-XX. 
[n]	J. Staples, S. Abbott, R. Caylor, R. Gough, D. Howard, and R. MacGill, “A Compact Proton RFQ Injector for the Bevalac”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper MO3-05, pp. 48-50. 
[n]	I. K. Sedlyarov et al., “Upgrade of the RF System of Siberia-2 Electron Storage Ring / SR Source”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5PFP015, pp. 2018-2020. 
[n]	J. G. Neumann et al., “Simulations and Experiments of Electron Beams Pre-Modulated at the Photocathode”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MOPB010, pp. 704-706. 
[n]	N. Kuklev, Y. K. Kim, S. Nagaitsev, A. L. Romanov, and A. Valishev, “IOTA Run 2 Beam Dynamics Studies in Nonlinear Integrable Systems”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1964-1967. doi:10.18429/JACoW-IPAC2021-TUPAB228
[n]	M. Pedrozzi et al., “SwissFEL Injector Test Facility ÔÇô Test and Plans”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper THPB30, pp. 625-628. 
[n]	K. Oide, “Overview of High Energy e+e- Factories”, in Proc. eeFACT'16, Daresbury, UK, Oct. 2016, pp. 1-3. doi:10.18429/JACoW-eeFACT2016-MOOTH1
[n]	M. Preger, “Review of Studies of Electron-Positron Factories”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 385-390. 
[n]	T. Watanabe, T. Ikeda, M. Kase, T. Katayama, S. Watanabe, and T. Kawaguchi, “Design of Highly-Sensitive Current Monitor with HTS SQUID and HTS Magnetic Shield”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPRI117, pp. 1995-1997. 
[n]	Z. K. Liang, W. Chen, X. Liu, J. Zha, K. F. Liu, and B. Qin, “Design of the Energy Selection System for Proton Therapy Based on GEANT4”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 30-32. doi:10.18429/JACoW-Cyclotrons2016-MOD01
[n]	V. K. Decyk, S. A. Friedman, and T. V. Singh, “Graphical Processing Unit-Based Particle-In-Cell Simulations”, in Proc. ICAP'09, San Francisco, CA, USA, Aug.-Sep. 2009, paper WE2IOPK03, pp. 96-100. 
[n]	U. Bechstedt et al., “The Stochastic Cooling System and its Application to Internal Experiments at the Cooler Synchrotron COSY”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP13F, pp. 553-555. 
[n]	H. T. Edwards et al., “Comparison of Buffered Chemical Polished and Electropolished 3.9 GHz Cavities”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper TUPPO063, pp. 379-383. 
[n]	D. Vandeplassche, J.-L. Biarrotte, H. Klein, and H. Podlech, “The Myrrha Linear Accelerator”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPS090, pp. 2718-2720. 
[n]	J. Shi et al., “New Quantity Describing the Pulse Shape Dependence of the High Gradient Limit in Single Cell Standing-Wave Accelerating Structures”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3878-3880. doi:10.18429/JACoW-IPAC2016-THPOR042
[n]	Y. Filatov, V. A. Mikhaylov, A. V. Butenko, A. D. Kovalenko, A. M. Kondratenko, and M. A. Kondratenko, “Solenoid Siberian Snake Without Compensation of Betatron Oscillation Coupling in Nuclotron@JINR”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1162-1164. doi:10.18429/JACoW-IPAC2014-TUPRO057
[n]	J. Karn, B. Dunham, and M. Tiefenback, “Operational Monitoring of the CEBAF RF System”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPR15, pp. 2271-2272. 
[n]	H. T. Li and Q. K. Jia, “Numerical Investigation of Longitudinal Coherence in a Linear Tapered SASE FEL”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper MOPC10, pp. 118-120. 
[n]	J. E. Spencer et al., “Fast Neutron Radioactivity and Damage Studies on Materials”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAS066, pp. 581-583. 
[n]	P. Chitnis and K. A. Brown, “Bayesian Reliability Model for Beam Permit System of RHIC at BNL”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 46-50. doi:10.18429/JACoW-ICALEPCS2015-MOD3I01
[n]	V. Kamerdzhiev, Y. Alexahin, D. N. Shatilov, V. D. Shiltsev, A. Valishev, and X. Zhang, “Experimental and Simulation Studies of Beam-Beam Compensation with Tevatron Electron Lenses”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAS024, pp. 1703-1705. 
[n]	A. M. Kolano, R. J. Barlow, A. Adelmann, and C. Baumgarten, “A Precise Beam Dynamics Model of the PSI Injector 2”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWO057, pp. 1020-1021. 
[n]	A. Caruso, “CHOPPER 500 STATUS REPORT”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 20P27, pp. XX-XX. 
[n]	T. Tanabe et al., “Electron Cooling Experiments at TARN II”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1571-1574. 
[n]	R. Huang, Q. K. Jia, H. T. Li, and Z. Zhao, “The Preliminary Study of a Pre-Bunched Terahertz Free Electron Laser by a Velocity Bunching Scheme”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 477-480. doi:10.18429/JACoW-FEL2019-WEP063
[n]	K. Saito et al., “Degassing Effect in Water - Sterilizing Effect -”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97C27, pp. 655-661. 
[n]	Z. J. Wang et al., “The Status of CiADS Superconducting LINAC”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 994-997. doi:10.18429/JACoW-IPAC2019-MOPTS059
[n]	J. R. Harris et al., “Longitudinal Dynamics in the University of Maryland Electron Ring”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MOPC010, pp. 713-715. 
[n]	O. Grimm, J. Feldhaus, J. Rossbach, E. Saldin, E. Schneidmiller, and M. V. Yurkov, “The Infrared Undulator Project at the VUV-FEL”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper MOPP055, pp. XX-XX. 
[n]	B. Aune et al., “ALS II :  The Saclay Proposal for a 2-GeV, cw Electron Facility”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3296-3299. 
[n]	P. W. Huang et al., “SINGLE SHOT CATHODE TRANSVERSE MOMENTUM IMAGING IN PHOTOINJECTORS”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1964-1967. doi:10.18429/JACoW-IPAC2019-TUPTS014
[n]	P. K. Saha et al., “Beam Commissioning of Two Horizontal Pulse Steering Magnets for Changing Injection Painting Area from MLF to MR in the 3-GeV RCS of J-PARC”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPME022, pp. 518-520. 
[n]	L. Groening et al., “Upgrade of the Unilac for Fair”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1281-1285. doi:10.18429/JACoW-IPAC2015-TUXB2
[n]	E. Molina Marinas et al., “European XFEL Phase Shifter: PC-based Control System”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPKN010, pp. 731-734. 
[n]	J. H. Shao et al., “Experiment of High Resolution Field Emission Imaging in an rf Photocathode Gun”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1772-1774. doi:10.18429/JACoW-IPAC2016-TUPOW015

For LaTeX

Use Complete Form

For BibTeX

References

Back to search