Warning
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] E. Janezic, “Beam Position Monitoring Challenges and Techniques for Recent and Future Lightsources”, presented at the RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, paper WED06, unpublished.
[n] T. Semba et al., “Design and Manufacture of Superconducting Magnet for the Wiggler in SAGA-LS”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEB038, pp. 358-360.
[n] U. Pudasaini, M. J. Kelley, G. V. Eremeev, C. E. Reece, and J. Tuggle, “Studies of Electropolishing and Oxypolishing Treated Diffusion Coated Nb3Sn Surfaces”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3954-3957. doi:10.18429/JACoW-IPAC2018-THPAL131
[n] J. P. Gonzalez-Aguilera, Y.-K. Kim, R. Roussel, A. Edelen, and C. Mayes, “Towards fully differentiable accelerator modeling”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2797-2800. doi:10.18429/JACoW-IPAC2023-WEPA065
[n] M. Jonker et al., “The CLIC Machine Protection”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEB071, pp. 2860-2862.
[n] O. B. Malyshev et al., “SR Power Distribution along Wiggler Section of ILC DR”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPE094, pp. 3569-3571.
[n] J. Kamiya et al., “Measurement of the Extraction Kicker System in J-PARC RCS”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS110, pp. 1759-1761.
[n] Yu. Senichev, T. Korsbjerg, S. P. M, and E. Zaplatine, “Solving the Problem of Heating of RF Contacts in Cavity Tuners”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2P022, pp. 2923-2925.
[n] A. I. Muminov, M. F. Vorogushin and D. V. Efremov, “Parameters, Present State and Application Perspectives of the U-250 Cyclotron”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper I-08, pp. 50-53.
[n] H. Hayano et al., “Development of an L-band RF Gun for High-duty-cycle Operation”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper THP121, pp. 1025-1027.
[n] T. Takayanagi et al., “Experimental Results of the Shift Bump Magnet in the J-PARC 3-GeV RCS”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS111, pp. 1762-1764.
[n] C. M. Jones, “Invited Paper: Large Electrostatic Accelerators”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper K01, pp. 496-503.
[n] P. Gladkikh et al., “Current Status of the Design of the Kharkov Pulse Stretcher Ring PSR-2000”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2057-2059.
[n] T. Takayanagi et al., “New SiC kicker power supply for J-PARC”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3769-3772. doi:10.18429/JACoW-IPAC2023-WEPM084
[n] P. A. McIntosh et al., “Realisation of a prototype superconducting CW cavity and cryomodule for energy recovery”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper WEP33, pp. XX-XX.
[n] J. P. Duke, “Stripping Foil Temperatures in the European Spallation Source”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP105G, pp. 2465-2467.
[n] S. A. Kahn et al., “Incorporating RF into a Muon Helical Cooling Channel”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPE072, pp. 3509-3511.
[n] W. R. Rawnsley, G. H. Mackenzie, and C. J. Oram, “The Production and Measurement of 150 ps Beam Pulses from the TRIUMF Cyclotron”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper E04, pp. 237-240.
[n] R. Kreutz et al., “Design Considerations on the SSC Collider Quadrupole Magnets”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1423-1426.
[n] J. Kasagi, S. Angius, and E. Kashy, “Beam Transport Calculation for K-500 Cyclotron Operation at Michigan State University”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2979-2982.
[n] S. Blanchard et al., “LHC Vacuum Supervisory Application for Run 3”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 459-463. doi:10.18429/JACoW-ICALEPCS2021-TUPV031
[n] G. Mun, J. Hu, H.-S. Kang, C. Kim, G. Kim, and W. W. Lee, “Beam Synchronous Data Acquisition Using the Virtual Event Receiver”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1351. doi:10.18429/JACoW-ICALEPCS2019-WEPHA105
[n] G. H. Mackenzie, R. Lee, and W. R. Rawnsley, “A Demonstration of Beam Intensity Modulation Without Loss of Charge”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper H-08, pp. 466-469.
[n] C. Zhang et al., “Design of the Superconducting Quarter Wave Resonators for HIAF”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 59-60. doi:10.18429/JACoW-SRF2017-MOPB007
[n] G. D. Alton et al., “Absolute Charge State Yields of 20 MeV I Ions Scattered from Argon and Xenon”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1685-1690.
For LaTeX
Use Complete Form
For BibTeX
References
- E. Janezic, “Beam Position Monitoring Challenges and Techniques for Recent and Future Lightsources”, presented at the 27th Russian Particle Accelerator Conference (RuPAC2021), Alushta, Crimea, Sep.-Oct. 2021, paper WED06, unpublished.
- T. Semba et al., “Design and Manufacture of Superconducting Magnet for the Wiggler in SAGA-LS”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEB038, pp. 358-360.
- U. Pudasaini, M. J. Kelley, G. V. Eremeev, C. E. Reece, and J. Tuggle, “Studies of Electropolishing and Oxypolishing Treated Diffusion Coated Nb3Sn Surfaces”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3954-3957.
- J. P. Gonzalez-Aguilera, Y.-K. Kim, R. Roussel, A. Edelen, and C. Mayes, “Towards fully differentiable accelerator modeling”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA065, pp. 2797-2800.
- M. Jonker et al., “The CLIC Machine Protection”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEB071, pp. 2860-2862.
- O. B. Malyshev et al., “SR Power Distribution along Wiggler Section of ILC DR”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPE094, pp. 3569-3571.
- J. Kamiya et al., “Measurement of the Extraction Kicker System in J-PARC RCS”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPLS110, pp. 1759-1761.
- Yu. Senichev, T. Korsbjerg, S. P. M, and E. Zaplatine, “Solving the Problem of Heating of RF Contacts in Cavity Tuners”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 2P022, pp. 2923-2925.
- A. I. Muminov, M. F. Vorogushin and D. V. Efremov, “Parameters, Present State and Application Perspectives of the U-250 Cyclotron”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper I-08, pp. 50-53.
- H. Hayano et al., “Development of an L-band RF Gun for High-duty-cycle Operation”, in Proc. 25th Linear Accelerator Conf. (LINAC'10), Tsukuba, Japan, Sep. 2010, paper THP121, pp. 1025-1027.
- T. Takayanagi et al., “Experimental Results of the Shift Bump Magnet in the J-PARC 3-GeV RCS”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPLS111, pp. 1762-1764.
- C. M. Jones, “Invited Paper: Large Electrostatic Accelerators”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper K01, pp. 496-503.
- P. Gladkikh et al., “Current Status of the Design of the Kharkov Pulse Stretcher Ring PSR-2000”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2057-2059.
- T. Takayanagi et al., “New SiC kicker power supply for J-PARC”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPM084, pp. 3769-3772.
- P. A. McIntosh et al., “Realisation of a prototype superconducting CW cavity and cryomodule for energy recovery”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper WEP33, pp. XX-XX.
- J. P. Duke, “Stripping Foil Temperatures in the European Spallation Source”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP105G, pp. 2465-2467.
- S. A. Kahn et al., “Incorporating RF into a Muon Helical Cooling Channel”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPE072, pp. 3509-3511.
- W. R. Rawnsley, G. H. Mackenzie, and C. J. Oram, “The Production and Measurement of 150 ps Beam Pulses from the TRIUMF Cyclotron”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper E04, pp. 237-240.
- R. Kreutz et al., “Design Considerations on the SSC Collider Quadrupole Magnets”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1423-1426.
- J. Kasagi, S. Angius, and E. Kashy, “Beam Transport Calculation for K-500 Cyclotron Operation at Michigan State University”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2979-2982.
- S. Blanchard et al., “LHC Vacuum Supervisory Application for Run 3”, in Proc. 18th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'21), Shanghai, China, Oct. 2021, pp. 459-463.
- G. Mun, J. Hu, H.-S. Kang, C. Kim, G. Kim, and W. W. Lee, “Beam Synchronous Data Acquisition Using the Virtual Event Receiver”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 1351.
- G. H. Mackenzie, R. Lee, and W. R. Rawnsley, “A Demonstration of Beam Intensity Modulation Without Loss of Charge”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper H-08, pp. 466-469.
- C. Zhang et al., “Design of the Superconducting Quarter Wave Resonators for HIAF”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 59-60.
- G. D. Alton et al., “Absolute Charge State Yields of 20 MeV I Ions Scattered from Argon and Xenon”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1685-1690.
Back to search