Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] E. Paoloni, S. Bettoni, M. E. Biagini, P. Raimondi, and M. K. Sullivan, “Advances in the Studies of the Magnetic Design for the Final Focus Quadrupoles of the SuperB”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6PFP045, pp. 238-240.
[n] F. Amman, J. M. Paterson, A. M. Sessler, and B. Zotter, “DISCUSSION: The 'Head-Tail' Instability”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 851-852.
[n] R. Sundelin, “Superconducting RF Activities at Cornell University”, in Proc. SRF'84, Geneva, Switzerland, Jul. 1984, paper SRF84-3, pp. XX-XX.
[n] E. Minehara, R. Nagai, and M. Takeuchi, “Fabrication and RF Properties of High-Tc Superconducting Microwave Passive Elements”, in Proc. SRF'89, Tsukuba, Japan, Aug. 1989, paper SRF89G19, pp. XX-XX.
[n] S. Takeuchi, “Status Report on JAERI Activities”, in Proc. SRF'89, Tsukuba, Japan, Aug. 1989, paper SRF89B03, pp. XX-XX.
[n] L. Butkowski, H. Schlarb, and V. Vogel, “Klystron Measurement and Protection System for XFEL on the MTCA.4 Architecture”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUCOCA09, pp. 937-939.
[n] C. H. Rode and D. Proch, “Cryogenic Optimization for Cavity Systems”, in Proc. SRF'89, Tsukuba, Japan, Aug. 1989, paper SRF89G24, pp. XX-XX.
[n] J. Xu, N. Liu, L. Schultz, G. Ulm, and E. Weihreter, “Local Improvement of the Field Homogeneity for a Light Source Dipole Magnet”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1128-1131.
[n] R. Nussbaumer and G. Waters, “Inexpensive IOCs for GPIB Support in the TRIUMF/ISAC Control System”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP573, pp. XX-XX.
[n] H. Koiso, A. Morita, Y. Ohnishi, and K. Oide, “Lattice Design for SuperKEKB”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6PFP044, pp. 2591-2591.
[n] D. Rifuggiato, L. Calabretta, L. Cosentino, and G. Cuttone, “Variety of Beam Production at the INFN LNS Superconducting Cyclotron”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper MOPPT011, pp. 52-54.
[n] K. Kato et al., “Measurements of Microwave Cavities Made of Bulk Superconductor YBa2Cu3O7-x”, in Proc. SRF'89, Tsukuba, Japan, Aug. 1989, paper SRF89G21, pp. XX-XX.
[n] D. W. Storm, T. Goliak, A. G. Seamster, J. M. Brennan, R. Coughlin, and I. Ben-Zvi, “Tests of Beta = 0.1 and Development of Beta = 0.2 - Lead Plated Quarter Wave Resonators”, in Proc. SRF'84, Geneva, Switzerland, Jul. 1984, paper SRF84-9, pp. XX-XX.
[n] T. Mimashi, M. Kikuchi, A. Tokuchi, and K. Tsuchida, “High-power Switch with SI-thyristor for the Power Supply of Very High Repletion Rate Pulsed Quadrupole Magnet”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPD010, pp. 1452-1454.
[n] C. H. Rivetta, K. J. Bertsche, A. Drago, and M. K. Sullivan, “Longitudinal Bunch Position Control for the Super-B Accelerator”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6PFP050, pp. 2607-2609.
[n] M. Amberg et al., “The Fast Piezo-Based Frequency Tuner for SC CH-Cavities”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP068, pp. 214-216.
[n] R. W. R?Âth et al., “Anomalous Loss Mechanisms in High Purity Nb Cavities”, in Proc. SRF'91, Hamburg, Germany, Aug. 1991, paper SRF91F01, pp. XX-XX.
[n] D. Kiehlmann, U. Klein, M. Peiniger, and H. Vogel, “Development and Industrial Fabrication of Superconducting Accelerator Modules”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1277-1280.
[n] J. W. Kwan, D. Baca, F. M. Bieniosek, and E. Chacon-Golcher, “Development of High Current Surface Ionization Sources for Heavy Ion Fusion”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH012, pp. 2102-2104.
[n] T. Katayama, “Invited Paper: Beam Accumulation and Momentum Cooling at TARN”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper O03, pp. 595-600.
[n] F. D. Dziuba et al., “Performance Tests of the Superconducting 217 MHz CH Cavity for the CW Demonstrator”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 440-443. doi:10.18429/JACoW-SRF2017-TUPB024
[n] S. Verd??-Andr?®s and Q. Wu, “Cavity Design for the Updated eRHIC Crabbing System”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 818-821. doi:10.18429/JACoW-IPAC2019-MOPRB109
[n] J. Kewisch et al., “Model for RHIC Ramp Controls”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1815-1818.
[n] M. Peiniger and H. Piel, “A Superconducting Nb3Sn Coated Multicell Accelerating Cavity”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3610-3613.
For LaTeX
Use Complete Form
For BibTeX
References
- E. Paoloni, S. Bettoni, M. E. Biagini, P. Raimondi, and M. K. Sullivan, “Advances in the Studies of the Magnetic Design for the Final Focus Quadrupoles of the SuperB”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6PFP045, pp. 238-240.
- F. Amman, J. M. Paterson, A. M. Sessler, and B. Zotter, “DISCUSSION: The 'Head-Tail' Instability”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 851-852.
- R. Sundelin, “Superconducting RF Activities at Cornell University”, in Proc. 2nd Int. Conf. RF Superconductivity (SRF'84), Geneva, Switzerland, Jul. 1984, paper SRF84-3, pp. XX-XX.
- E. Minehara, R. Nagai, and M. Takeuchi, “Fabrication and RF Properties of High-Tc Superconducting Microwave Passive Elements”, in Proc. 4th Int. Conf. RF Superconductivity (SRF'89), Tsukuba, Japan, Aug. 1989, paper SRF89G19, pp. XX-XX.
- S. Takeuchi, “Status Report on JAERI Activities”, in Proc. 4th Int. Conf. RF Superconductivity (SRF'89), Tsukuba, Japan, Aug. 1989, paper SRF89B03, pp. XX-XX.
- L. Butkowski, H. Schlarb, and V. Vogel, “Klystron Measurement and Protection System for XFEL on the MTCA.4 Architecture”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUCOCA09, pp. 937-939.
- C. H. Rode and D. Proch, “Cryogenic Optimization for Cavity Systems”, in Proc. 4th Int. Conf. RF Superconductivity (SRF'89), Tsukuba, Japan, Aug. 1989, paper SRF89G24, pp. XX-XX.
- J. Xu, N. Liu, L. Schultz, G. Ulm, and E. Weihreter, “Local Improvement of the Field Homogeneity for a Light Source Dipole Magnet”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1128-1131.
- R. Nussbaumer and G. Waters, “Inexpensive IOCs for GPIB Support in the TRIUMF/ISAC Control System”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper WP573, pp. XX-XX.
- H. Koiso, A. Morita, Y. Ohnishi, and K. Oide, “Lattice Design for SuperKEKB”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6PFP044, pp. 2591-2591.
- D. Rifuggiato, L. Calabretta, L. Cosentino, and G. Cuttone, “Variety of Beam Production at the INFN LNS Superconducting Cyclotron”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper MOPPT011, pp. 52-54.
- K. Kato et al., “Measurements of Microwave Cavities Made of Bulk Superconductor YBa2Cu3O7-x”, in Proc. 4th Int. Conf. RF Superconductivity (SRF'89), Tsukuba, Japan, Aug. 1989, paper SRF89G21, pp. XX-XX.
- D. W. Storm, T. Goliak, A. G. Seamster, J. M. Brennan, R. Coughlin, and I. Ben-Zvi, “Tests of Beta = 0.1 and Development of Beta = 0.2 - Lead Plated Quarter Wave Resonators”, in Proc. 2nd Int. Conf. RF Superconductivity (SRF'84), Geneva, Switzerland, Jul. 1984, paper SRF84-9, pp. XX-XX.
- T. Mimashi, M. Kikuchi, A. Tokuchi, and K. Tsuchida, “High-power Switch with SI-thyristor for the Power Supply of Very High Repletion Rate Pulsed Quadrupole Magnet”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPD010, pp. 1452-1454.
- C. H. Rivetta, K. J. Bertsche, A. Drago, and M. K. Sullivan, “Longitudinal Bunch Position Control for the Super-B Accelerator”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6PFP050, pp. 2607-2609.
- M. Amberg et al., “The Fast Piezo-Based Frequency Tuner for SC CH-Cavities”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP068, pp. 214-216.
- R. W. R?Âth et al., “Anomalous Loss Mechanisms in High Purity Nb Cavities”, in Proc. 5th Int. Conf. RF Superconductivity (SRF'91), Hamburg, Germany, Aug. 1991, paper SRF91F01, pp. XX-XX.
- D. Kiehlmann, U. Klein, M. Peiniger, and H. Vogel, “Development and Industrial Fabrication of Superconducting Accelerator Modules”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1277-1280.
- J. W. Kwan, D. Baca, F. M. Bieniosek, and E. Chacon-Golcher, “Development of High Current Surface Ionization Sources for Heavy Ion Fusion”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH012, pp. 2102-2104.
- T. Katayama, “Invited Paper: Beam Accumulation and Momentum Cooling at TARN”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper O03, pp. 595-600.
- F. D. Dziuba et al., “Performance Tests of the Superconducting 217 MHz CH Cavity for the CW Demonstrator”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 440-443.
- S. Verd??-Andr?®s and Q. Wu, “Cavity Design for the Updated eRHIC Crabbing System”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 818-821.
- J. Kewisch et al., “Model for RHIC Ramp Controls”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1815-1818.
- M. Peiniger and H. Piel, “A Superconducting Nb3Sn Coated Multicell Accelerating Cavity”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3610-3613.
Back to search