Favourites
For Word
[n] E. Schneidmiller and M. V. Yurkov, “Investigation of the Coherence Properties of the Radiation at FLASH”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2879-2881. doi:10.18429/JACoW-IPAC2014-THPRO011
[n] K. Fan, S. Igarashi, K. Ishii, T. Koseki, and M. Uota, “Possibility Study of High Repetition Rate Operation of JPARC Main Ring”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPEA015, pp. 2528-2530.
[n] X. P. Ding, D. B. Cline, J. S. Berg, H. G. Kirk, and A. A. Garren, “Status of Studies of Achromat-based 6D Ionization Cooling Rings for Muons”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPZ030, pp. 865-867.
[n] A. Murata et al., “Improvement of an S-band RF-gun cavity with a Cs-Te Photo-cathode”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP074, pp. 721-723.
[n] J. Lesrel, C. Joly, E. Plechov, A. Schnase, G. Schreiber, and W. Vinzenz, “RF Power Systems for the FAIR Proton Linac”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP078, pp. 236-238.
[n] D. Huang, W. Fang, D. Gu, Q. Gu, G. Q. Lin, and M. Zhang, “Design Study of the LINAC of the Shanghai Soft X-ray Free Electron Laser Facility”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper MOPD46, pp. 141-143.
[n] S. Doebert, “Status of Very High-Gradient Cavity Tests”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TU202, pp. 274-278.
[n] S. A. Veitzer and P. Stoltz, “Fluid Models of Inductively Coupled Plasma Sources for Negative Hydrogen Ion Sources”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2147-2149. doi:10.18429/JACoW-IPAC2019-TUPTS096
[n] E. Schneidmiller and M. V. Yurkov, “Analysis of Operation of Harmonic Lasing Self-seeded FEL”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2876-2878. doi:10.18429/JACoW-IPAC2014-THPRO010
[n] S. Schnepp, S. Setzer, and T. Weiland, “Investigation of Numerical Noise in PIC-Codes”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT037, pp. 2562-2564.
[n] Y. C. Yang et al., “Development of the TPS Vacuum Interlock and Monitor Systems”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2387-2389. doi:10.18429/JACoW-IPAC2014-WEPME051
[n] Ch. Schmidt et al., “Performance of the MTCA.4 Based LLRF System at FLASH”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2433-2435. doi:10.18429/JACoW-IPAC2014-WEPME067
[n] S. Doebert, “Integration of the PHIN RF Gun into the CLIC Test Facility”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPLS129, pp. 861-863.
[n] M. Song, H. X. Deng, B. Liu, and D. Wang, “Deflecting Cavity Dynamics for Time-Resolved Machine Studies of SXFEL User Facility”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 169-172. doi:10.18429/JACoW-IBIC2016-MOPG50
[n] J. Sekutowicz et al., “Superstructures: First Cold Test and Future Applications”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper TUO05, pp. 234-238.
[n] J. Ruan, M. D. Church, and J. K. Santucci, “Design and Commission of the Driven Laser System for Advanced Superconducting Test Accelerator”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper MOPD56, pp. 169-172.
[n] A. Bosotti et al., “Vertical Tests of ESS Medium Beta Prototype Cavities at LASA”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1015-1018. doi:10.18429/JACoW-IPAC2017-MOPVA063
[n] T. Furuya et al., “Superconducting Accelerating Cavity for KEK B-Factory”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper SRF95F35, pp. 729-733.
[n] L. Monaco et al., “Fabrication and Treatment of the ESS Medium Beta Prototype Cavities”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1003-1006. doi:10.18429/JACoW-IPAC2017-MOPVA060
[n] K. Rehlich, “Status of the Control System for the European XFEL”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper TUDAUST04, pp. 597-599.
[n] F. A. Emanov, D. Bolkhovityanov, P. B. Cheblakov, and Ya. V. Pisarev, “Present Status of VEPP-5 Injection Complex IT Infrastructure”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 429-431. doi:10.18429/JACoW-RUPAC2018-THPSC11
[n] A. Kitagawa, S. Biri, R. R?ícz, Y. Kato, M. Muramatsu, and W. Takasugi, “Practical Comparison of Two-Frequency Heating Phenomena in Different ECR Ion Sources”, in Proc. ECRIS'16, Busan, Korea, Aug.-Sep. 2016, pp. 55-58. doi:10.18429/JACoW-ECRIS2016-WEAO03
[n] M. Muramatsu et al., “Design of Compact ECR Ion Source for C5+ Production”, in Proc. ECRIS'16, Busan, Korea, Aug.-Sep. 2016, pp. 64-66. doi:10.18429/JACoW-ECRIS2016-WEBO02
For LaTeX
Use Complete Form
For BibTeX
References
- E. Schneidmiller and M. V. Yurkov, “Investigation of the Coherence Properties of the Radiation at FLASH”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2879-2881.
- K. Fan, S. Igarashi, K. Ishii, T. Koseki, and M. Uota, “Possibility Study of High Repetition Rate Operation of JPARC Main Ring”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPEA015, pp. 2528-2530.
- X. P. Ding, D. B. Cline, J. S. Berg, H. G. Kirk, and A. A. Garren, “Status of Studies of Achromat-based 6D Ionization Cooling Rings for Muons”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPZ030, pp. 865-867.
- A. Murata et al., “Improvement of an S-band RF-gun cavity with a Cs-Te Photo-cathode”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP074, pp. 721-723.
- J. Lesrel, C. Joly, E. Plechov, A. Schnase, G. Schreiber, and W. Vinzenz, “RF Power Systems for the FAIR Proton Linac”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP078, pp. 236-238.
- D. Huang, W. Fang, D. Gu, Q. Gu, G. Q. Lin, and M. Zhang, “Design Study of the LINAC of the Shanghai Soft X-ray Free Electron Laser Facility”, in Proc. 34th Int. Free Electron Laser Conf. (FEL'12), Nara, Japan, Aug. 2012, paper MOPD46, pp. 141-143.
- S. Doebert, “Status of Very High-Gradient Cavity Tests”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TU202, pp. 274-278.
- S. A. Veitzer and P. Stoltz, “Fluid Models of Inductively Coupled Plasma Sources for Negative Hydrogen Ion Sources”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2147-2149.
- E. Schneidmiller and M. V. Yurkov, “Analysis of Operation of Harmonic Lasing Self-seeded FEL”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2876-2878.
- S. Schnepp, S. Setzer, and T. Weiland, “Investigation of Numerical Noise in PIC-Codes”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPLT037, pp. 2562-2564.
- Y. C. Yang et al., “Development of the TPS Vacuum Interlock and Monitor Systems”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2387-2389.
- Ch. Schmidt et al., “Performance of the MTCA.4 Based LLRF System at FLASH”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2433-2435.
- S. Doebert, “Integration of the PHIN RF Gun into the CLIC Test Facility”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPLS129, pp. 861-863.
- M. Song, H. X. Deng, B. Liu, and D. Wang, “Deflecting Cavity Dynamics for Time-Resolved Machine Studies of SXFEL User Facility”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 169-172.
- J. Sekutowicz et al., “Superstructures: First Cold Test and Future Applications”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper TUO05, pp. 234-238.
- J. Ruan, M. D. Church, and J. K. Santucci, “Design and Commission of the Driven Laser System for Advanced Superconducting Test Accelerator”, in Proc. 34th Int. Free Electron Laser Conf. (FEL'12), Nara, Japan, Aug. 2012, paper MOPD56, pp. 169-172.
- A. Bosotti et al., “Vertical Tests of ESS Medium Beta Prototype Cavities at LASA”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1015-1018.
- T. Furuya et al., “Superconducting Accelerating Cavity for KEK B-Factory”, in Proc. 7th Int. Conf. RF Superconductivity (SRF'95), Gif-sur-Yvette, France, Oct. 1995, paper SRF95F35, pp. 729-733.
- L. Monaco et al., “Fabrication and Treatment of the ESS Medium Beta Prototype Cavities”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1003-1006.
- K. Rehlich, “Status of the Control System for the European XFEL”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper TUDAUST04, pp. 597-599.
- F. A. Emanov, D. Bolkhovityanov, P. B. Cheblakov, and Ya. V. Pisarev, “Present Status of VEPP-5 Injection Complex IT Infrastructure”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 429-431.
- A. Kitagawa, S. Biri, R. R?ícz, Y. Kato, M. Muramatsu, and W. Takasugi, “Practical Comparison of Two-Frequency Heating Phenomena in Different ECR Ion Sources”, in Proc. 22nd Int. Workshop on ECR Ion Sources (ECRIS'16), Busan, Korea, Aug.-Sep. 2016, pp. 55-58.
- M. Muramatsu et al., “Design of Compact ECR Ion Source for C5+ Production”, in Proc. 22nd Int. Workshop on ECR Ion Sources (ECRIS'16), Busan, Korea, Aug.-Sep. 2016, pp. 64-66.
Back to search