Warning
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] K. Saito, “Recent Developments in SRF Cavity Cleaning Techniques at KEK”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper TUA010, pp. 118-123.
[n] H. A. Thiessen, “A Review of Kaon Factory Proposals”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1601-1607.
[n] K. Saito, “Q-Slope Analysis of Niobium SC RF Cavities”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper THP17, pp. 643-651.
[n] N. P. Sobenin, “HOM Damping in SBLC Accelerating Section Using Input Coupler”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper THP66, pp. 824-826.
[n] J. P. Blewett, “Bunchers”, in Proc. LINAC'62, Long Island, NY, USA, Aug. 1962, paper C-04, pp. 261-266.
[n] R. R. Johnson, W. Z. Gelbart, F. M. Nortier, N. R. Stevenson, J. Orzechowski, and F. Cifarelli, “High Current Radioisotope Production with Solid Target System”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3099-3102.
[n] A. Rhyder, R. N. Fernandes, and A. C. Starritt, “Qt Based GUI System for EPICS Control Systems”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper WECC03, pp. 10-11.
[n] G. De Ninno, E. Allaria, and M. Trovo, “Start-to-end Time-Dependent Study of FEL Output Sensitivity to Electron-beam Jitters for the First Stage of the FERMI@Elettra Project”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper MOPPH058, pp. 178-181.
[n] H. Y. Barminova, “Nonlinear Oscillations of a Sheet Electron Beam”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3113-3115. doi:10.18429/JACoW-IPAC2014-THPRO096
[n] K. Hasegawa, A. Ueno, and Y. Kondo, “Fabrication and Low-Power Measurements of the J-PARC 50-mA RFQ Prototype”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper THP072, pp. 749-751.
[n] H. Ma, J. Rose, and C. Sorrentino, “Radio Frequency System of the NSLS-II Injector LINAC for Multi-Bunch-Mode Beams”, in Proc. NAPAC'22, Albuquerque, NM, USA, Aug. 2022, pp. 813-815. doi:10.18429/JACoW-NAPAC2022-WEPA76
[n] J. Mnich, “The Future of High-energy Accelerators”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4856-4860. doi:10.18429/JACoW-IPAC2017-FRYCA1
[n] S. Kersten et al., “Development of a Detector Control System for the ATLAS Pixel Detector”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper THBT002, pp. XX-XX.
[n] W. R. Smythe et al., “RF Cavities with Transversely Biased Ferrite Tuning”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2951-2954.
[n] K. Akasaka and S. Kamada, “Experimental Study of Head-Tail Damping and Nonlinear Filamentation Based on Precise Analysis of Coherent Betatron Oscillations in Electron Storage Rings”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP049L, pp. 1141-1143.
[n] D. Liska, S. J. Black, J. N. DiMarco, J. Ledford, and G. Spalek, “Design Features of a Seven-Cell High-Gradient Superconducting Cavity”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper MO4-43, pp. 163-165.
[n] Y. Kim, C. Kim, and W.-K. Lau, “Report on the hands-on training with the ELEGANT code at ISBA24”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEPS126, unpublished.
[n] L.M.Onischenko, E.V.Samsonov, “EXTERNAL INJECTION INTO JINR PHASOTRON - COMPUTER SIMULATION II”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper P4-04, pp. XX-XX.
[n] R. MacGill and R. Yourd, “Mechanical Design of a Heavy Ion RFQ”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3004-3007.
[n] Ja. N. Rascvetalov, G. I. Krupny, M. A. Maslov, and V. N. Peleshko, “Installation for Irradiation of Thin Foils by Halo Proton Beam on IHEP Accelerator”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 249-252. doi:10.18429/JACoW-RUPAC2018-TUPSA49
For LaTeX
Use Complete Form
For BibTeX
References
- K. Saito, “Recent Developments in SRF Cavity Cleaning Techniques at KEK”, in Proc. 9th Int. Conf. RF Superconductivity (SRF'99), Santa Fe, NM, USA, Nov. 1999, paper TUA010, pp. 118-123.
- H. A. Thiessen, “A Review of Kaon Factory Proposals”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1601-1607.
- K. Saito, “Q-Slope Analysis of Niobium SC RF Cavities”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper THP17, pp. 643-651.
- N. P. Sobenin, “HOM Damping in SBLC Accelerating Section Using Input Coupler”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper THP66, pp. 824-826.
- J. P. Blewett, “Bunchers”, in Proc. 1962 Conf. on Linear Accelerators for High Energies (LINAC'62), Long Island, NY, USA, Aug. 1962, paper C-04, pp. 261-266.
- R. R. Johnson, W. Z. Gelbart, F. M. Nortier, N. R. Stevenson, J. Orzechowski, and F. Cifarelli, “High Current Radioisotope Production with Solid Target System”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3099-3102.
- A. Rhyder, R. N. Fernandes, and A. C. Starritt, “Qt Based GUI System for EPICS Control Systems”, in Proc. 9th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'12), Kolkata, India, Dec. 2012, paper WECC03, pp. 10-11.
- G. De Ninno, E. Allaria, and M. Trovo, “Start-to-end Time-Dependent Study of FEL Output Sensitivity to Electron-beam Jitters for the First Stage of the FERMI@Elettra Project”, in Proc. 28th Int. Free Electron Laser Conf. (FEL'06), Berlin, Germany, Aug.-Sep. 2006, paper MOPPH058, pp. 178-181.
- H. Y. Barminova, “Nonlinear Oscillations of a Sheet Electron Beam”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3113-3115.
- K. Hasegawa, A. Ueno, and Y. Kondo, “Fabrication and Low-Power Measurements of the J-PARC 50-mA RFQ Prototype”, in Proc. 23rd Linear Accelerator Conf. (LINAC'06), Knoxville, TN, USA, Aug. 2006, paper THP072, pp. 749-751.
- H. Ma, J. Rose, and C. Sorrentino, “Radio Frequency System of the NSLS-II Injector LINAC for Multi-Bunch-Mode Beams”, in Proc. North American Particle Accelerator Conf. (NAPAC'22), Albuquerque, NM, USA, Aug. 2022, pp. 813-815.
- J. Mnich, “The Future of High-energy Accelerators”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4856-4860.
- S. Kersten et al., “Development of a Detector Control System for the ATLAS Pixel Detector”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper THBT002, pp. XX-XX.
- W. R. Smythe et al., “RF Cavities with Transversely Biased Ferrite Tuning”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2951-2954.
- K. Akasaka and S. Kamada, “Experimental Study of Head-Tail Damping and Nonlinear Filamentation Based on Precise Analysis of Coherent Betatron Oscillations in Electron Storage Rings”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP049L, pp. 1141-1143.
- D. Liska, S. J. Black, J. N. DiMarco, J. Ledford, and G. Spalek, “Design Features of a Seven-Cell High-Gradient Superconducting Cavity”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper MO4-43, pp. 163-165.
- Y. Kim, C. Kim, and W.-K. Lau, “Report on the hands-on training with the ELEGANT code at ISBA24”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPS126, this conference.
- L.M.Onischenko, E.V.Samsonov, “EXTERNAL INJECTION INTO JINR PHASOTRON - COMPUTER SIMULATION II”, in Proc. 16th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'01), East Lansing, MI, USA, May 2001, paper P4-04, pp. XX-XX.
- R. MacGill and R. Yourd, “Mechanical Design of a Heavy Ion RFQ”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3004-3007.
- Ja. N. Rascvetalov, G. I. Krupny, M. A. Maslov, and V. N. Peleshko, “Installation for Irradiation of Thin Foils by Halo Proton Beam on IHEP Accelerator”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 249-252.
Back to search