Warning
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] V. G. Dudnikov, “Relative Contribution of Volume and Surface-Plasma Generation of Negative Ions in Gas Discharges”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPE037, pp. 2482-2484.
[n] W. X. Cheng, B. Bacha, and O. Singh, “NSLS2 Beam Position Monitor Calibration”, in Proc. BIW'12, Newport News, VA, USA, Apr. 2012, paper MOPG022, pp. 77-79.
[n] M. Dehler, G. Scrimali, M. Lonza, R. Fortunati, S. Dordevic, and F. Marcellini, “Fast kickers for bunch by bunch feedbacks at SLS 2.0 and ELETTRA”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4817-4819. doi:10.18429/JACoW-IPAC2023-THPL149
[n] M. Mansouri, S. L. Birch, A. Nordt, D. Paulic, Y. K. Sin, and A. Toral Diez, “Accelerator Personnel Safety Systems for European Spallation Source”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1884-1886. doi:10.18429/JACoW-IPAC2017-TUPIK080
[n] I. Krouptchenkov and K. Wittenburg, “FPGA based Frame Grabber for Video Beam Diagnostics”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper TUPC12, pp. 174-176.
[n] V. Schoefer, L. A. Ahrens, K. A. Brown, J. W. Glenn, and H. Huang, “Optics Error Measurements in the AGS for Polarized Proton Operation”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP018, pp. 1534-1536.
[n] G. K. Sahoo, K. Balewski, and A. Kling, “Post-Mortem Analysis of BPM-Interlock Triggered Beam Dumps at PETRA-III”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper WEPD22, pp. 43-45.
[n] A. Noda et al., “Low Energy Beam Transport and Matching Section under Space Charge Effect”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2423-2426.
[n] A. Goto et al., “Progress on the Sector Magnets for the RIKEN SRC”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper I-1, pp. XX-XX.
[n] I. Yamada, Y. Hikichi, J. Kamiya, M. Kinsho, and N. Ogiwara, “Development of a Gas Distribution Measuring System for Gas Sheet Beam Profile Monitor”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2567-2570. doi:10.18429/JACoW-IPAC2019-WEPGW041
[n] J. L. Navarro Quirante et al., “High Power RF Transmission Lines of the Light Proton Therapy Linac”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 158-160. doi:10.18429/JACoW-LINAC2022-MOPOGE07
[n] G. A. Loew, “Electron Linac Instabilities”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 529-541.
[n] S. Casalbuoni, “Novel undulators: the long and winding road to brightness”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1-7. doi:10.18429/JACoW-IPAC2024-MOYB2
[n] H. Yi et al., “Physical Design for SASE Beamlines of S3FEL”, presented at the IPAC'23, Venice, Italy, May 2023, paper TUPL046, unpublished.
[n] G. Morpurgo, “The Bom 1000 Turn Display: A Tool to Visualize the Transverse Phase-space Topology at LEP”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP14H, pp. 1571-1573.
[n] S. B. Wibowo, T. Matsumoto, S. Michizono, T. Miura, and F. Qiu, “IF-Mixture Performance During Cavity Conditioning at STF-KEK”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 785-788. doi:10.18429/JACoW-LINAC2016-THPRC009
[n] A. Xiao and M. Borland, “Progress on the Injection Transport Line Design for the APS Upgrade”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 120-123. doi:10.18429/JACoW-NAPAC2019-MOPLM12
[n] D. M. Dykes and D.S.G. Higgins, “Possible Cavity Construction Techniques for the DIAMOND Storage Ring”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPQ18, pp. 1762-1764.
[n] P. Stillman et al., “Neutrino Horn Power Supply Operational Experience”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1746-1749.
[n] L. R. Doolittle, “Low-level RF Control System Design and Architecture”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THYMA05, pp. 559-562.
[n] F. Taft, Y. Fontenla-Barba, J. Giner Navarro, I. Martel, E. Martínez López, and J. Resta-Lopez, “Progress on beam dynamics studies for the ISRS isochronous ring spectrometer”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper MOPS092, unpublished.
[n] Lenkszus F., Laird R., “A High-Precision Pulse-Width Modulator Source”, in Proc. ICALEPCS'99, Trieste, Italy, Oct. 1999, paper MC1P01, pp. XX-XX.
[n] H. Van Der Beken, D. R. Machen, J. H. B. Madsen, and C. Serre, “The Process Control Computer at the CERN Proton Synchrotron: Its Application in the Operation of a Fast Ejected Beam”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 864-866.
[n] A. Carne and P. M. Lapostolle, “Design Equations in an Alvarez-Type Proton Linear Accelerator”, in Proc. LINAC'66, Los Alamos, NM, USA, Oct. 1966, paper V-01, pp. 201-206.
[n] M. R. P. Walive Pathiranage and A. V. Gurevich, “Effect of Mean Free Path on Nonlinear Losses of Trapped Vortices Driven by a RF Field Field”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 67. doi:10.18429/JACoW-SRF2021-SUPFDV003
[n] D. Xie, J. Y. Benitez, C. M. Lyneis, D. S. Todd, and W. Lu, “Recent production of intense high charge ion beams with VENUS”, in Proc. ECRIS'16, Busan, Korea, Aug.-Sep. 2016, pp. 141-145. doi:10.18429/JACoW-ECRIS2016-THAO01
For LaTeX
Use Complete Form
For BibTeX
References
- V. G. Dudnikov, “Relative Contribution of Volume and Surface-Plasma Generation of Negative Ions in Gas Discharges”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPE037, pp. 2482-2484.
- W. X. Cheng, B. Bacha, and O. Singh, “NSLS2 Beam Position Monitor Calibration”, in Proc. 15th Beam Instrumentation Workshop (BIW'12), Newport News, VA, USA, Apr. 2012, paper MOPG022, pp. 77-79.
- M. Dehler, G. Scrimali, M. Lonza, R. Fortunati, S. Dordevic, and F. Marcellini, “Fast kickers for bunch by bunch feedbacks at SLS 2.0 and ELETTRA”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPL149, pp. 4817-4819.
- M. Mansouri, S. L. Birch, A. Nordt, D. Paulic, Y. K. Sin, and A. Toral Diez, “Accelerator Personnel Safety Systems for European Spallation Source”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1884-1886.
- I. Krouptchenkov and K. Wittenburg, “FPGA based Frame Grabber for Video Beam Diagnostics”, in Proc. 8th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'07), Venice, Italy, May 2007, paper TUPC12, pp. 174-176.
- V. Schoefer, L. A. Ahrens, K. A. Brown, J. W. Glenn, and H. Huang, “Optics Error Measurements in the AGS for Polarized Proton Operation”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP018, pp. 1534-1536.
- G. K. Sahoo, K. Balewski, and A. Kling, “Post-Mortem Analysis of BPM-Interlock Triggered Beam Dumps at PETRA-III”, in Proc. 9th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'12), Kolkata, India, Dec. 2012, paper WEPD22, pp. 43-45.
- A. Noda et al., “Low Energy Beam Transport and Matching Section under Space Charge Effect”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2423-2426.
- A. Goto et al., “Progress on the Sector Magnets for the RIKEN SRC”, in Proc. 16th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'01), East Lansing, MI, USA, May 2001, paper I-1, pp. XX-XX.
- I. Yamada, Y. Hikichi, J. Kamiya, M. Kinsho, and N. Ogiwara, “Development of a Gas Distribution Measuring System for Gas Sheet Beam Profile Monitor”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2567-2570.
- J. L. Navarro Quirante et al., “High Power RF Transmission Lines of the Light Proton Therapy Linac”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 158-160.
- G. A. Loew, “Electron Linac Instabilities”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 529-541.
- S. Casalbuoni, “Novel undulators: the long and winding road to brightness”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOYB2, pp. 1-7.
- H. Yi et al., “Physical Design for SASE Beamlines of S3FEL”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPL046, unpublished.
- G. Morpurgo, “The Bom 1000 Turn Display: A Tool to Visualize the Transverse Phase-space Topology at LEP”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP14H, pp. 1571-1573.
- S. B. Wibowo, T. Matsumoto, S. Michizono, T. Miura, and F. Qiu, “IF-Mixture Performance During Cavity Conditioning at STF-KEK”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 785-788.
- A. Xiao and M. Borland, “Progress on the Injection Transport Line Design for the APS Upgrade”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 120-123.
- D. M. Dykes and D.S.G. Higgins, “Possible Cavity Construction Techniques for the DIAMOND Storage Ring”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WPQ18, pp. 1762-1764.
- P. Stillman et al., “Neutrino Horn Power Supply Operational Experience”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1746-1749.
- L. R. Doolittle, “Low-level RF Control System Design and Architecture”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper THYMA05, pp. 559-562.
- F. Taft, Y. Fontenla-Barba, J. Giner Navarro, I. Martel, E. Martínez López, and J. Resta-Lopez, “Progress on beam dynamics studies for the ISRS isochronous ring spectrometer”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPS092, this conference.
- Lenkszus F., Laird R., “A High-Precision Pulse-Width Modulator Source”, in Proc. 7th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'99), Trieste, Italy, Oct. 1999, paper MC1P01, pp. XX-XX.
- H. Van Der Beken, D. R. Machen, J. H. B. Madsen, and C. Serre, “The Process Control Computer at the CERN Proton Synchrotron: Its Application in the Operation of a Fast Ejected Beam”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 864-866.
- A. Carne and P. M. Lapostolle, “Design Equations in an Alvarez-Type Proton Linear Accelerator”, in Proc. 1966 Linear Accelerator Conf. (LINAC'66), Los Alamos, NM, USA, Oct. 1966, paper V-01, pp. 201-206.
- M. R. P. Walive Pathiranage and A. V. Gurevich, “Effect of Mean Free Path on Nonlinear Losses of Trapped Vortices Driven by a RF Field Field”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 67.
- D. Xie, J. Y. Benitez, C. M. Lyneis, D. S. Todd, and W. Lu, “Recent production of intense high charge ion beams with VENUS”, in Proc. 22nd Int. Workshop on ECR Ion Sources (ECRIS'16), Busan, Korea, Aug.-Sep. 2016, pp. 141-145.
Back to search