Favourites
For Word
[n] J. J. Song, R. L. Kustom, and J. H. Zhou, “Aperture Coupling Measurement in a Test Chamber for the Advancecd Photon Source (APS)”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 922-925.
[n] G. Velev et al., “Measurements of Field Decay and Snapback Effect on Tevatron Dipole and Quadrupole Magnets”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPAP029, pp. 2098-2100.
[n] T. Chanwattana, R. Bartolini, A. Seryi, and E. Tsesmelis, “Development of Advanced Fourth Generation Light Sources for the Accelerator Science Laboratory”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1765-1767. doi:10.18429/JACoW-IPAC2015-TUPJE060
[n] T. Iwashita et al., “Acceleration Scheme in the AIA and its Control System”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAN044, pp. 1484-1486.
[n] T. W. Hall, J. T. M. Lyles, A. Poudel, and A. S. Waghmare, “Initial Results of the 201.25 MHz Coaxial Window Test Stand”, in Proc. NAPAC'22, Albuquerque, NM, USA, Aug. 2022, pp. 458-461. doi:10.18429/JACoW-NAPAC2022-TUPA52
[n] N. Tsoupas et al., “Uniform Beam Distributions at the Target of the NSRL Beam Transfer Line”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAS102, pp. 3720-3722.
[n] A. Dudarev et al., “Advanced Studies on New Generation of Electron-positron Accelerators and Colliders for Fundamental and Applied Researches”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPME027, pp. 1631-1633.
[n] S. Ahmadian, F. AbbasiDavani, F. Ghasemi, and M. Shafiee, “A Design of Thermionic Electron Gun for Traveling Wave Electron-linac in order to Inject Beam into Booster Synchrotron Accelerator”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPC066, pp. 286-288.
[n] S. W. Williams, F. J. Humphry, J. M. Potter, and G. W. Rodenz, “Voltage Breakdown Testing for the Radio-Frequency Quadrupole Accelerator”, in Proc. LINAC'79, Montauk, NY, USA, Sep. 1979, paper S3-3, pp. 144-147.
[n] J. A. Einstein-Curtis et al., “Laser Focal Position Correction Using FPGA-Based ML Models”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 262-266. doi:10.18429/JACoW-ICALEPCS2023-TU1BCO04
[n] J. S. Schmidt et al., “The SIS100 RF Systems - Updates and Recent Progress”, in Proc. IPAC'20, Caen, France, May 2020, pp. 26. doi:10.18429/JACoW-IPAC2020-TUVIR14
[n] H.-P. Chang et al., “Resurrection of RESOLVE at NSRRC Prepared for the First Turn Beam Steering of the TPS Commissioning”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPP025, pp. 1665-1667.
[n] L. W. Funk et al., “SSCL Linac Commissioning Diagnostic Cart”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2130-2133.
[n] S. P. Antipov, S. V. Kuzikov, A. Liu, A. V. Savilov, and A. A. Vikharev, “Tapered Flying Radiofrequency Undulator”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4059-4061. doi:10.18429/JACoW-IPAC2018-THPMF012
[n] L. Pocher, I. Haber, T. Antonsen, and P. O'Shea, “Optimizing the discovery of underlying nonlinear beam dynamics and moment evolution”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4503-4506. doi:10.18429/JACoW-IPAC2023-THPL036
[n] G. Vandoni, H. Furci, T. Koettig, A. Macpherson, K. Turaj, and L. Vega Cid, “Thermal Mapping of SRF Cavities by Second Sound Detection With Transition Edge Sensors and Oscillating Superleak Transducers”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 1182-1186. doi:10.18429/JACoW-SRF2019-THP105
[n] M. Shumail, V. A. Dolgashev, and C. M. Markusen, “Design of High Efficiency High Power CW Linacs for Environmental and Industrial Applications”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4974-4976. doi:10.18429/JACoW-IPAC2018-THPML126
[n] T. Sugimoto, K. Fan, K. Ishii, H. Matsumoto, K. Abe, and S. Fukuoka, “Development of a Non-inductive Ceramic Resistor”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWA004, pp. 669-671.
For LaTeX
Use Complete Form
For BibTeX
References
- J. J. Song, R. L. Kustom, and J. H. Zhou, “Aperture Coupling Measurement in a Test Chamber for the Advancecd Photon Source (APS)”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 922-925.
- G. Velev et al., “Measurements of Field Decay and Snapback Effect on Tevatron Dipole and Quadrupole Magnets”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPAP029, pp. 2098-2100.
- T. Chanwattana, R. Bartolini, A. Seryi, and E. Tsesmelis, “Development of Advanced Fourth Generation Light Sources for the Accelerator Science Laboratory”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1765-1767.
- T. Iwashita et al., “Acceleration Scheme in the AIA and its Control System”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAN044, pp. 1484-1486.
- T. W. Hall, J. T. M. Lyles, A. Poudel, and A. S. Waghmare, “Initial Results of the 201.25 MHz Coaxial Window Test Stand”, in Proc. North American Particle Accelerator Conf. (NAPAC'22), Albuquerque, NM, USA, Aug. 2022, pp. 458-461.
- N. Tsoupas et al., “Uniform Beam Distributions at the Target of the NSRL Beam Transfer Line”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPAS102, pp. 3720-3722.
- A. Dudarev et al., “Advanced Studies on New Generation of Electron-positron Accelerators and Colliders for Fundamental and Applied Researches”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPME027, pp. 1631-1633.
- S. Ahmadian, F. AbbasiDavani, F. Ghasemi, and M. Shafiee, “A Design of Thermionic Electron Gun for Traveling Wave Electron-linac in order to Inject Beam into Booster Synchrotron Accelerator”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPC066, pp. 286-288.
- S. W. Williams, F. J. Humphry, J. M. Potter, and G. W. Rodenz, “Voltage Breakdown Testing for the Radio-Frequency Quadrupole Accelerator”, in Proc. 1979 Linear Accelerator Conf. (LINAC'79), Montauk, NY, USA, Sep. 1979, paper S3-3, pp. 144-147.
- J. A. Einstein-Curtis et al., “Laser Focal Position Correction Using FPGA-Based ML Models”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper TU1BCO04, pp. 262-266.
- J. S. Schmidt et al., “The SIS100 RF Systems - Updates and Recent Progress”, in Proc. 11th Int. Particle Accelerator Conf. (IPAC'20), Caen, France, May 2020, pp. 26.
- H.-P. Chang et al., “Resurrection of RESOLVE at NSRRC Prepared for the First Turn Beam Steering of the TPS Commissioning”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPP025, pp. 1665-1667.
- L. W. Funk et al., “SSCL Linac Commissioning Diagnostic Cart”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2130-2133.
- S. P. Antipov, S. V. Kuzikov, A. Liu, A. V. Savilov, and A. A. Vikharev, “Tapered Flying Radiofrequency Undulator”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4059-4061.
- L. Pocher, I. Haber, T. Antonsen, and P. O'Shea, “Optimizing the discovery of underlying nonlinear beam dynamics and moment evolution”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPL036, pp. 4503-4506.
- G. Vandoni, H. Furci, T. Koettig, A. Macpherson, K. Turaj, and L. Vega Cid, “Thermal Mapping of SRF Cavities by Second Sound Detection With Transition Edge Sensors and Oscillating Superleak Transducers”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 1182-1186.
- M. Shumail, V. A. Dolgashev, and C. M. Markusen, “Design of High Efficiency High Power CW Linacs for Environmental and Industrial Applications”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4974-4976.
- T. Sugimoto, K. Fan, K. Ishii, H. Matsumoto, K. Abe, and S. Fukuoka, “Development of a Non-inductive Ceramic Resistor”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPWA004, pp. 669-671.
Back to search