JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	N. Pichoff et al., “The SARAF-LINAC Project 2017 Status”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2194-2196. doi:10.18429/JACoW-IPAC2017-TUPVA052
[n]	A. B. Sefkow et al., “A Fast Faraday Cup for the Neutralized Drift Compression Experiment”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPAT068, pp. 3765-3767. 
[n]	D. Reggiani, P.-A. Duperrex, R. D?Âlling, D. C. Kiselev, J. Welte, and M. Wohlmuther, “Improving Machine and Target Protection in the SINQ Beam Line at PSI-HIPA”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2337-2340. doi:10.18429/JACoW-IPAC2018-WEPAL068
[n]	D. Bogert, L. J. Chapman, R. J. Ducar, and S. L. Segler, “The Tevatron Control System”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2204-2207. 
[n]	J. M. Coello de Portugal, F. S. Carlier, A. Langner, T. Persson, P. K. Skowronski, and R. Tomas, “OMC Software Improvements in 2014”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 426-429. doi:10.18429/JACoW-IPAC2015-MOPJE056
[n]	S. Hunziker et al., “Reference Distribution and Synchronization System for SwissFEL: Concept and First Results”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper MOCZB2, pp. 29-33. 
[n]	L. Praestegaard et al., “Investigation of the ANKA Injector”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH082, pp. 2284-2286. 
[n]	I. Itoh, K. Saito, H. Inoue, and W. Singer, “Hot Roll Bonding Method for Nb/Cu Clad Seamless SC Cavity”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper TUP40, pp. 412-417. 
[n]	J. Gao et al., “ILC 1.3 GHz Superconducting RF Technology Development Program at IHEP”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP038, pp. 906-908. 
[n]	E. Weihreter et al., “Status of the Superconducting Compact Storage Ring Cosy”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 237-240. 
[n]	N. Ueda, Y. Hirao, A. Mizobuchi, T. Nakanishi, N. Tokuda, and S. Yamada, “Construction of the RFQ TALL""”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3178-3181. 
[n]	L. Scibile et al., “The LHC radiation monitoring system for the environment and safety: from design to operation”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPD030, pp. 514-516. 
[n]	G. J. Caporaso et al., “High Gradient Induction Accelerator”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUYC02, pp. 857-861. 
[n]	K. Klopfer, W. Ackermann, and T. Weiland, “Eigenmode Computation for Ferrite-Loaded Cavity Resonators”, in Proc. ICAP'12, Rostock-Warnemunde, Germany, Aug. 2012, paper THACC2, pp. 250-252. 
[n]	R. Witkover, E. Zitvogel, and R. Michnoff, “RHIC Beam Loss Monitor System Design”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8P067, pp. 2218-2220. 
[n]	G. H. Luo et al., “The Status of Top-up Injection at NSRRC”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper TUM104, pp. XX-XX. 
[n]	X. Yang, K. Ha, V. V. Smaluk, Y. Tian, and L. Yu, “Multi-frequency AC LOCO: A Fast and Precise Technique for Lattice Correction”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 831-834. doi:10.18429/JACoW-IPAC2017-MOPIK125
[n]	Y. Lu, G. Feng, T. Hu, J. Jiang, X. D. Tu, and Y. Q. Xiong, “Design of a Fully Automated Test Bench for Measuring the Field Distribution in Standing Wave Cavity”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 246-249. doi:10.18429/JACoW-LINAC2018-MOPO119
[n]	M. N. Polyanskiy, I. Ben-Zvi, I. Pogorelsky, V. Yakimenko, and Z. Najmudin, “Prospects for Proton Accelerators Driven by the Radiation Pressure from a Sub-PW CO2 Laser”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP154, pp. 379-381. 
[n]	Z. Shen et al., “High Intensity Ion Beam Extraction System for FECR”, presented at the ECRIS'20, East Lansing, MI, USA, Sep. 2020, paper WEXZO01, unpublished. 
[n]	S. Lederer et al., “XPS Investigations on Cs2Te Photocathodes of FLASH and PITZ”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6RFP054, pp. 482-484. 
[n]	J. A. Clarke, H. L. Owen, M. W. Poole, S. L. Smith, and N. G. Wyles, “Prospects for a 4th Generation Light Source for the UK”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TOPA011, pp. 253-255. 
[n]	A. Roth, F. Frommberger, N. Heurich, W. Hillert, M. Schedler, and R. Zimmermann, “Commissioning of Multibunch Feedback Systems at the Fast Ramping Stretcher Ring ELSA”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC077, pp. 250-252. 
[n]	A. Schempp et al., “Status of the Frankfurt Zero-Mode Proton RFQ”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3536-3539. 
[n]	J. B?ñhr et al., “Diagnostics for the Photon Injector Test Facility in Desy Zeuthen”, in Proc. DIPAC'01, Grenoble, France, May 2001, paper PS21, pp. XX-XX. 
[n]	A. C. Crawford, V. Kashikhin, A. Makarov, S. Nagaitsev, A. Shemyakin, and V. Vostrikov, “Cooling Section Solenoid for the 5 MeV Fermilab Electron Cooling Project”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP3A01, pp. 2447-2449. 
[n]	C. K. Kuan et al., “Heat Transfer Analysis of a Water-cooled Channel for the TPS Front End Components”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPFI072, pp. 3466-3468. 
[n]	C. I. Briegel, R. Neswold, and M. Z. Sliczniak, “A Protocol for Streaming Large Messages with UDP”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 693-696. doi:10.18429/JACoW-ICALEPCS2015-WEPGF002
[n]	J. Keil, I. V. Agapov, and R. Brinkmann, “A Lattice for PETRA IV Based on the Combination of Different Arc Cell Designs”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 399-402. doi:10.18429/JACoW-IPAC2021-MOPAB109
[n]	J. Nguyen Xuan, B. Copy, and M. Donszelmann, “A C/C++ Build System Based on Maven for the LHC Controls System”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPKS026, pp. 848-851. 
[n]	J. L. Gonzalez, T. B. Bogey, C. Deplano, and J.-J. Savioz, “Development of a High Dynamic Range Beam Position Measurement System Using Logarithmic Amplifiers for the SPS at CERN”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper MOPC18, pp. 89-92. 
[n]	H. V. Smith, P. Allison, and J. Sherman, “Pulsed H Beams from Penning SPS Sources Equipped with Circular Emitters”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper MO3-47, pp. 164-166. 
[n]	R. Hajima and M. Fujiwara, “Generation of GeV Photons from X-ray Free Electron Laser Oscillators”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 751-753. doi:10.18429/JACoW-IPAC2016-MOPOW017
[n]	A. Bosotti, D. Corti, C. Pagani, G. Varisco, F. Zibra, and M. Di Giacomo, “High Sensitivity Electronic System for the Phase Probes of the LNS/MILANO Superconducting Cyclotron”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper IXD-05, pp. 483-486. 
[n]	K. Fransson, K. J. Gajewski, M. Jacewicz, M. Jobs, J. M. Y. Ruber, and V. G. Ziemann, “The EPICS Based Control System at the FREIA Laboratory”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1890-1892. doi:10.18429/JACoW-IPAC2017-TUPIK084
[n]	G. Thomas, K. Azarov, R. Barill?¿re, S. Cabaret, N. Kulman, and J. Rochez, “LHC GCS A model-driven approach for automatic PLC and SCADA code generation”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper O5_007. 
[n]	D. Trbojevic, M. Blaskiewicz, E. D. Courant, and A. A. Garren, “Fixed Field Alternating Gradient Lattice Design without Opposite Bend”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPLE051, pp. 1199-1201. 
[n]	S. O. Brauer et al., “Design and Testing of a High Power, Ultra-High Vacuum, Dual-Directional Coupler for the Advanced Photon Source (APS) Linear Accelerator”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPE09, pp. 2020-2022. 
[n]	C. Swain, ?û. Apsimon, A. Salehilashkajani, C. P. Welsch, J. Wolfenden, and H. D. Zhang, “Improvements on the Modified Nomarski Interferometer for Measurements of Supersonic Gas Jet Density Profiles”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 235-238. doi:10.18429/JACoW-LINAC2022-MOPORI06
[n]	A. Lueangaramwong et al., “Numerical Study of Beam Dynamics in PITZ Bunch Compressor”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3285-3288. doi:10.18429/JACoW-IPAC2021-WEPAB274
[n]	Q. Z. Xing et al., “CPHS Linac Status at Tsinghua University”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3268-3270. doi:10.18429/JACoW-IPAC2014-THPME023
[n]	P. Savage, Y. A. Cheng, A. P. Letchford, and J. K. Pozimski, “Mechanical Design and RF Measurement on RFQ for Front-end Test Stand at RAL”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH117, pp. 318-320. 
[n]	L. Yang et al., “Low Q Cavity BPM Study for the Beam Position Measurement of Nanosecond Spaced Electron Bunches”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1881-1883. doi:10.18429/JACoW-IPAC2018-WEPAF027
[n]	T. Furuya et al., “Superconducting Accelerating Cavity for KEK B-Factory”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper SRF95F35, pp. 729-733. 
[n]	K. K. Jain, B. N. Ding, and M. J. Rhee, “Scaling Study of Pseudospark Produced Electron Beam”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1972-1975. 
[n]	M. G. Atanasov et al., “Upgrade of the TCDQ Diluters for the LHC Beam Dump System”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3079-3082. doi:10.18429/JACoW-IPAC2015-WEPMN067
[n]	M. Knott, G. Gunderson, F. Lenkszus, and W. McDowell, “Control System Features of the Argonne 6 GeV Synchrotron Light Source”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2014-2017. 
[n]	K. Nakamura et al., “Experimental Study of Self-Trapping in Capillary Discharge Guided Laser Wakefield Acceleration”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6RFP076, pp. 2973-2975. 
[n]	D. Banerjee et al., “Studies for the K12 High-Intensity Kaon Beam at CERN”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3049-3052. doi:10.18429/JACoW-IPAC2021-WEPAB186
[n]	S. Schreiber et al., “Improved Operation of the TTF Photoinjector for FEL Operation”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPRI052, pp. 1804-1806. 
[n]	L. Bertolini et al., “Design of the Linear Non-Evaporable Getter Pump for the PEP-II B-Factory”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4P016, pp. 3622-3624. 
[n]	G. Thomas, K. Azarov, R. Barill?¿re, S. Cabaret, N. Kulman, and J. Rochez, “LHC GCS A framework for the production of 23 homogeneous control systems”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P1_042. 
[n]	M. Yu, D. J. Harding, and G. Velev, “Dipole Corrector Magnets for the LBNE Beam Line”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP152, pp. 1115-1117. 
[n]	M. T. Rooney, C. J. Densham, and Y. Yamada, “A FEA Study of the Stress Waves Generated in the T2K Beam Window from the Interaction with a High Power Pulsed Proton Beam”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6RFP038, pp. 2875-2877. 
[n]	M. Galonska et al., “Data Supply of Accelerator Devices - Data Management of Device Process Data at a Medical Accelerator”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 477-480. doi:10.18429/JACoW-IPAC2018-MOPML033
[n]	Q. Ji, S. S. Bulanov, E. Esarey, W. Leemans, T. Schenkel, and S. Steinke, “Design of a Compact ion Beam Transport System for the BELLA Ion Accelerator”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3391-3393. doi:10.18429/JACoW-IPAC2016-THPMR004
[n]	Yu. A. Satov et al., “Development of Injector for ITEP Heavy Ion Synchrotron Based on Laser Plasma Generator”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper TUPSA020, pp. 86-88. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search