Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] H. P. Kindermann, W. Herdrich, and W. Sinclair, “The rf Power Plant of the SPS”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3414-3417.
[n] G. Ciovati et al., “Development of a Prototype Superconducting Radio-Frequency Cavity for Conduction-Cooled Accelerators”, presented at the SRF'23, Grand Rapids, MI, USA, Jun. 2023, paper THIXA04, unpublished.
[n] I. Miura, E. Minehara, Y. Mashima, S. Yoshizawa, R. Nagai, and M. Takeuchi, “Measurements of the Microwave Surface Resistance of Bi2Sr2CaCu2Ox Superconductor on Silver Substrate Using a Half-wave Coaxial Cavity Resonator”, in Proc. SRF'91, Hamburg, Germany, Aug. 1991, paper SRF91G01, pp. XX-XX.
[n] C. Pira et al., “Progress of application and surface enhancement by Plasma Electrolytic Polishing as a new treatment for SRF substrates and accelerator components preparation”, presented at the IPAC'23, Venice, Italy, May 2023, paper THPM036, unpublished.
[n] M. T. Crofford, T. W. Hardek, K.-U. Kasemir, and M. F. Piller, “Status of the Spallation Neutron Source Prototype Accumulator Ring Low Level Radio Frequency Control System”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5PFP091, pp. 2225-2227.
[n] R. Garoby et al., “Upgrade Plans for the LHC Injector Complex”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUXA02, pp. 1010-1014.
[n] C. Gough and M. Mailand, “Septum and Kicker Systems for the SLS”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH032, pp. 3741-3743.
[n] D. J. Silvester, “Applications of Cyclotrons in Medical Diagnosis (Invited paper)”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper F-02, pp. 408-413.
[n] M. F. Piller, M. T. Crofford, and T. W. Hardek, “High Intensity Beam Performance of the SNS Accumulator Ring LLRF Control System”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5PFP093, pp. 2228-2230.
[n] S. Sakanaka et al., “Design of an RF System for the ATF Damping Ring”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPR03, pp. 1791-1793.
[n] J. Tamura et al., “Progress of the spoke cavity prototyping for the JAEA-ADS linac”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 496-498. doi:10.18429/JACoW-LINAC2024-TUPB078
[n] M. Omet et al., “Efforts to Suppress Field Emission in SRF Cavities at KEK”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 167-171. doi:10.18429/JACoW-SRF2023-MOPMB033
[n] P. Dhakal, G. Ciovati, and G. R. Myneni, “A Path to Higher Q0 with Large Grain Niobium Cavities”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPC091, pp. 2426-2428.
[n] B. Mikulec et al., “Commissioning and Results of the Half-Sector Test Installation with 160 MeV H- beam from Linac4”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 619-622. doi:10.18429/JACoW-IPAC2017-MOPIK047
[n] C. Pira et al., “Nb3Sn on Cu Coating By Magnetron Sputtering From Target Synthesized via Liquid Tin Diffusion”, presented at the IPAC'23, Venice, Italy, May 2023, paper WEPA174, unpublished.
[n] S. T. Giordano and J. Hannwacker, “Field Measurements of Variable Multi-Stem Accelerating Structure”, in Proc. LINAC'68, Long Island, NY, USA, May 1968, paper F-12, pp. 565-569.
[n] G. Flanagan et al., “Evaluation and Implementation of High Performance Real-Time Signal Processing For Rayleigh Scattering Based Quench Detection for High Field Superconducting Magnets”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPD041, pp. 3602-3604.
For LaTeX
Use Complete Form
For BibTeX
References
- H. P. Kindermann, W. Herdrich, and W. Sinclair, “The rf Power Plant of the SPS”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3414-3417.
- G. Ciovati et al., “Development of a Prototype Superconducting Radio-Frequency Cavity for Conduction-Cooled Accelerators”, presented at the 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper THIXA04, unpublished.
- I. Miura, E. Minehara, Y. Mashima, S. Yoshizawa, R. Nagai, and M. Takeuchi, “Measurements of the Microwave Surface Resistance of Bi2Sr2CaCu2Ox Superconductor on Silver Substrate Using a Half-wave Coaxial Cavity Resonator”, in Proc. 5th Int. Conf. RF Superconductivity (SRF'91), Hamburg, Germany, Aug. 1991, paper SRF91G01, pp. XX-XX.
- C. Pira et al., “Progress of application and surface enhancement by Plasma Electrolytic Polishing as a new treatment for SRF substrates and accelerator components preparation”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPM036, unpublished.
- M. T. Crofford, T. W. Hardek, K.-U. Kasemir, and M. F. Piller, “Status of the Spallation Neutron Source Prototype Accumulator Ring Low Level Radio Frequency Control System”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5PFP091, pp. 2225-2227.
- R. Garoby et al., “Upgrade Plans for the LHC Injector Complex”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUXA02, pp. 1010-1014.
- C. Gough and M. Mailand, “Septum and Kicker Systems for the SLS”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FPAH032, pp. 3741-3743.
- D. J. Silvester, “Applications of Cyclotrons in Medical Diagnosis (Invited paper)”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper F-02, pp. 408-413.
- M. F. Piller, M. T. Crofford, and T. W. Hardek, “High Intensity Beam Performance of the SNS Accumulator Ring LLRF Control System”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5PFP093, pp. 2228-2230.
- S. Sakanaka et al., “Design of an RF System for the ATF Damping Ring”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WPR03, pp. 1791-1793.
- J. Tamura et al., “Progress of the spoke cavity prototyping for the JAEA-ADS linac”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 496-498.
- M. Omet et al., “Efforts to Suppress Field Emission in SRF Cavities at KEK”, in Proc. 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper MOPMB033, pp. 167-171.
- P. Dhakal, G. Ciovati, and G. R. Myneni, “A Path to Higher Q0 with Large Grain Niobium Cavities”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPC091, pp. 2426-2428.
- B. Mikulec et al., “Commissioning and Results of the Half-Sector Test Installation with 160 MeV H- beam from Linac4”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 619-622.
- C. Pira et al., “Nb3Sn on Cu Coating By Magnetron Sputtering From Target Synthesized via Liquid Tin Diffusion”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA174, unpublished.
- S. T. Giordano and J. Hannwacker, “Field Measurements of Variable Multi-Stem Accelerating Structure”, in Proc. 1968 Proton Linear Accelerator Conf. (LINAC'68), Long Island, NY, USA, May 1968, paper F-12, pp. 565-569.
- G. Flanagan et al., “Evaluation and Implementation of High Performance Real-Time Signal Processing For Rayleigh Scattering Based Quench Detection for High Field Superconducting Magnets”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPD041, pp. 3602-3604.
Back to search