JaCoW Logo

Reference Search

Warning
Some papers titles are all uppercase, you must correct this before using this reference.

The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	M. Borland, T. G. Berenc, R. R. Lindberg, V. Sajaev, and Y. P. Sun, “Lower Emittance Lattice for the Advanced Photon Source Upgrade Using Reverse Bending Magnets”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 877-880. doi:10.18429/JACoW-NAPAC2016-WEPOB01
[n]	M. Q. Barton, “Application of an On-Line Computer to Accelerator Studies”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 335-336. 
[n]	W. P. Lysenko, V. W. Hughes, S. Ohnuma, P. A. Thompson, and H. F. Vogel, “Beam Calculations for LAMPF Muon Channel”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1593-1598. 
[n]	B. Shin, C.-K. Sung, C. Kim, I. Nam, and M. Chung, “Electron beam test to the multi-stripline-based non-destructive energy spread monitor for the PAL-XFEL”, presented at the IPAC'23, Venice, Italy, May 2023, paper THPA007, unpublished. 
[n]	B. C. Kuske et al., “Incorporation of a MESA Linac Modules into BERLinPro”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1449-1452. doi:10.18429/JACoW-IPAC2019-TUPGW023
[n]	R. Gebel, “NEGATIVE ION SOURCES AT THE INJECTOR CYCLOTRON FOR THE COOLER SYNCHROTRON COSY/J?£LICH”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 19P16, pp. XX-XX. 
[n]	X. Wu et al., “Installation, operations, and upgrade of a CS-30 cyclotron for the production of alpha emitters At-211 and Ac-225 at the Ionetix TAT facility”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper TUPB048, unpublished. 
[n]	D. Baca, E. Chacon-Golcher, J. Kwan, and J. K. Wu, “Fabrication of Large Diameter Alumino-Silicate K+ Sources”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FPAB005, pp. 3294-3296. 
[n]	Y. P. Sun, “Multi-Objective Online Optimization of Beam Lifetime at APS”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 913-915. doi:10.18429/JACoW-NAPAC2016-WEPOB12
[n]	A. Yamaguchi et al., “2D TRACKING CODE FOR DRIFT TUBE LINAC”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3482-3484. doi:10.18429/JACoW-IPAC2019-THPMP014
[n]	J. Stackhouse et al., “Optimization of laser coupling into optically field ionized plasma channels for laser-plasma acceleration”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper MOPR52, unpublished. 
[n]	A. Hillman, J. Carwardine, and G. Sprau, “Magnet Power Supply Reliability at the Advanced Photon Source”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH002, pp. 3657-3659. 
[n]	A. Dick et al., “Coupling of codes for modeling high-energy-density conditions in fourth generation light sources”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper MOPS076, unpublished. 
[n]	R. Perry, “Some Thoughts Related to Cryogenic Linacs”, in Proc. LINAC'62, Long Island, NY, USA, Aug. 1962, paper B-15, pp. 206-208. 
[n]	M. Nomura et al., “Status of High Power CW Linac at PNC”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 745-748. 
[n]	H. Yang, C. H. Shim, I. Nam, and M. Cho, “Electron bunch spacing for the FEL generation with a laser heater and collimators at PAL-XFEL”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper MOPG41, unpublished. 
[n]	S. Hashimoto et al., “First Observation of Quasiperiodic Undulator Radiation”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP061G, pp. 2549-2551. 
[n]	Y. P. Sun, M. Borland, R. R. Lindberg, and V. Sajaev, “APS-U Lattice Design for Off-Axis Accumulation”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 920-923. doi:10.18429/JACoW-NAPAC2016-WEPOB14
[n]	P. Manwani et al., “Excitation of Very High Gradient Plasma Wakefields From Nanometer Scale Beams”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1806-1809. doi:10.18429/JACoW-IPAC2022-WEPOST048
[n]	R. Schmitz, “What's behind an Accelerator-Control-System?”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper WECOMA04, pp. 13-15. 
[n]	S. Humphries, “Xenos: X-Ray Monte Carlo Code Suite”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2766-2768. doi:10.18429/JACoW-IPAC2021-WEPAB075
[n]	T. Stengler, K. Aulenbacher, F. Hug, and S. D. W. Thomas, “SRF testing for Mainz Energy Recovering Superconducting Accelerator MESA”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 508-512. doi:10.18429/JACoW-SRF2019-TUP041
[n]	F. Brinker, “Precision Alignment of BPM's with Quadrupole Magnets”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper TUP67, pp. 502-504. 
[n]	J. R. Zagel, V. K. Bharadwaj, J. M. Smolucha, and T. M. Watts, “Tuning Loop Control System for the Fermilab Debuncher DRF1 Cavities”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 794-797. 
[n]	S. Kawatsu et al., “Feasibility Study on Superconducting System for Intense CW Ion Linac”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP092L, pp. 2132-2136. 
[n]	V. Sajaev, M. Borland, Y. P. Sun, and A. Xiao, “Simulation Study of the Helical Superconducting Undulator Installation at the Advanced Photon Source”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 907-909. doi:10.18429/JACoW-NAPAC2016-WEPOB10
[n]	R. S. Livingston, “A Survey of Methods of Accelerating Heavy Ions”, in Proc. Cyclotrons'69, Oxford, UK, Sep. 1969, paper CYC69E01, pp. XX-XX. 
[n]	H. J. Choi, K. H. Gil, H.-S. Kang, S. H. Kim, and K. W. Seo, “Introduction to BINP HLS to Measure Vertical Changes on PAL-XFEL Buildings and Ground”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 994-997. doi:10.18429/JACoW-IPAC2015-MOPTY028
[n]	R. F. Lambiase, B. Oerter, and J. Smith, “Power Supply Control for the Spallation Neutron Source”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP2B17, pp. 2211-2213. 
[n]	Y. Senichev et al., “Electron Cooled Beam Losses Phenomena in COSY”, in Proc. HB'10, Morschach, Switzerland, Sep.-Oct. 2010, paper THO1C06, pp. 649-653. 
[n]	Y. L. Wang, T. Emoto, M. Nomura, I. Sato, and S. Toyama, “A Novel Chopper System with Very Little Emittance Growth”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1373-1376. 
[n]	M. Sessler, C. Turner, and S. Wurtele, “Control of Longitudinal Collective Behavior in the Muon Collider Rings”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4W033, pp. 422-424. 
[n]	Y. Ma, A. N. Koveshnikov, D. Lang, R. E. Laxdal, and N. Muller, “Thermosiphon Cooling Loops for ARIEL Cryomodules”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 309-311. doi:10.18429/JACoW-SRF2017-MOPB105
[n]	R. Jiang and Y. B. Leng, “Application of Clustering by Fast Search and Find of Density Peaks to Beam Diagnostics at SSRF”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2581-2583. doi:10.18429/JACoW-IPAC2019-WEPGW045
[n]	Y. P. Sun, “Online Minimization of Vertical Beam Sizes at APS”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 916-919. doi:10.18429/JACoW-NAPAC2016-WEPOB13
[n]	S. Hashimoto, K. Kobayashi, Y. Miyahara, S. Sasaki, T. Shimada, and M. Takao, “Design Study of Quasi-Periodic Undulator”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP056G, pp. 2546-2548. 
[n]	M. C. Wilson, K. A. R. Baker, E. V. Buckley, M. T. Heron, and J. R. Alexander, “Diamond Personnel Safety System”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP515, pp. XX-XX. 
[n]	Y. L. Wang, T. Emoto, M. Nomura, S. T??yama, and I. Sato, “A Novel Chopper System for High Power CW Linac”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper MO-61, pp. 205-207. 
[n]	M. T. Heron, K. A. R. Baker, S. Lay, and P. D. Woods, “Use of Industrial Control Solutions in the Diamond Project”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP548, pp. XX-XX. 
[n]	L. N. Blumberg, J. B. Murphy, and M. F. Reusch, “Lattice Properties of the Phase I BNL X-Ray Lithography Source Obtained from Fits to Magnetic Measurement Data”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2664-2667. 
[n]	P. Baudrenghien et al., “The New RF Control System for the CERN SPS Accelerator”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP015L, pp. 1757-1759. 
[n]	Y. K. Batygin, V. K. Bharadwaj, D. C. Schultz, and J. C. Sheppard, “Design Studies of Positron Collection for the NLC”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH056, pp. 3804-3806. 
[n]	D. Arnold et al., “Power Couplers Design for Third Harmonic and Spoke Cavities at Fermilab”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper THP50, pp. 580-582. 
[n]	I. J. Gillingham et al., “Diamond's transition from VME to fieldbus based distributed control”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper THCOAA04, pp. 124-126. 
[n]	Y. Kato, T. Iida, and F. Sato, “Large Bore ECR Ion Source with Cylindorically Comb-Shaped Magnetic Fields Configuration”, in Proc. HIAT'09, Venice, Italy, Jun. 2009, paper E-03, pp. 326-330. 
[n]	M. Kreider and T. Fleck, “FAIR Timing Master”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper WEPL011, pp. 50-52. 
[n]	J. Cuperus, “An Interactive Alarm System for the CERN PS Accelerator Complex”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2337-2340. 
[n]	R. Baer, M. Schwickert, and T. Fleck, “Requirements and Coherent Realization of the HICAT Control System Functionality for Test, Commissioning, and Operation”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper RPPB29, pp. 674-676. 
[n]	D. Li, S. Amano, K. Horikawa, K. Imasaki, S. Miyamoto, and T. Mochizuki, “Experiment on Iodine Transmutation through High-Energy Gamma Ray”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper WEPC26, pp. 558-560. 
[n]	C. F. Chan and J. W. Staples, “A Compact Double Einzel Lens LEBT with Steering for H+ Beams”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TU-98, pp. 594-596. 
[n]	M. Kelly et al., “Installation and commissioning of the APS-U bunch lengthening system”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2713-2716. doi:10.18429/JACoW-IPAC2024-WEPS10
[n]	G. S. Levine and G. W. Bennett, “The Brookhaven AGS Radiation Monitoring Systems”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 734-736. 
[n]	D. Winklehner, J. R. Alonso, J. M. Conrad, and R. W. Hamm, “An RFQ Direct Injection Scheme for the IsoDAR High Intensity H2+ Cyclotron”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3384-3386. doi:10.18429/JACoW-IPAC2015-WEPTY048
[n]	E. Jones, F. Rohner, J. C. Schnuriger, T. R. Sherwood, and S. van der Meer, “Antiproton Production and Collection for the CERN Antiproton Accumulator”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2778-2781. 
[n]	H. Ohtsuka et al., “Research and Development for the 8 GeV Booster Synchrotron”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 412-415. 
[n]	J. Olivares Herrador, A. Latina, B. Gimeno-Martinez, D. Esperante Pereira, N. Fuster-Martinez, and Y. Zhao, “Simulation of beam loading compensation with RF-Track”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3136-3139. doi:10.18429/JACoW-IPAC2024-THPC56
[n]	J. Norem, M. Knott, and A. Rauchas, “Beam Stabillity in a 6 GeV Synchrotron Light Source”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1883-1886. 
[n]	P. J. Channell, “The Moment Approach to Charged Particle Beam Dynamics”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2607-2610. 
[n]	M. K. Dey, P. R. Sarma, and R. K. Bhandari, “A Group of Codes for Finding the Pole Profile in Quadrupoles With High Field Quality”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper P3-23, pp. XX-XX. 
[n]	D. Winklehner, “Updated Physics Design of the DAEALUS and IsoDAR Coupled Cyclotrons for High Intensity H2+ Beam Production”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 137-139. doi:10.18429/JACoW-Cyclotrons2016-TUB02
[n]	Y. Nakazawa et al., “Development of Inter-Digital H-Mode Drift-Tube Linac Prototype with Alternative Phase Focusing for a Muon Linac in the J-PARC Muon G-2/EDM Experiment”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 606-609. doi:10.18429/JACoW-IPAC2019-MOPRB017
[n]	F. Trinkel, F. Hinder, D. Shergelashvili, and H. Soltner, “Beam Based Calibration of a Rogowski Coil Used as a Horizontal and Vertical Beam Position Monitor”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 302-306. doi:10.18429/JACoW-IBIC2016-TUPG01
[n]	H. Y. He, H. Song, J. M. Liu, R. H. Liu, and G. Y. Wang, “Design of Remote Helium Mass Spectrometer Leak Detector”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 123. doi:10.18429/JACoW-MEDSI2020-TUPA02
[n]	R. Jiang, J. Chen, and Y. B. Leng, “High-Accuracy Diagnostic Tool for Beam Position Monitor Troubleshooting in SSRF Based on Clustering Analysis”, in Proc. IBIC'20, Santos, Brazil, Sep. 2020, pp. 166-169. doi:10.18429/JACoW-IBIC2020-WEPP28
[n]	M. Kelly, “Status of superconducting spoke cavity development”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper WE302, pp. XX-XX. 
[n]	Ph. Lebrun, O. Pagano, T. M. Taylor, and L. Walckiers, “Operational Experience with the LEP Low-Beta Superconducting Quadrupoles”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1641-1644. 
[n]	P. Shrivastava, S. Krishnagopal, P. N. Prakash, and S. Som, “Progress of Recent SRF Activities in India”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp.. doi:10.18429/JACoW-SRF2021-THOTEV03
[n]	M. Yadav et al., “Radiation Diagnostics for AWA and FACET-II Flat Beams in Plasma”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1791-1794. doi:10.18429/JACoW-IPAC2022-WEPOST042
[n]	B. Odegard, D. Stuart, and P. Freeman, “Development of a Modular X-ray Detector for Beamline Diagnostics at Los Alamos National Lab”, presented at the IPAC'23, Venice, Italy, May 2023, paper THPA008, unpublished. 
[n]	P. Manwani et al., “Beam Matching in an Elliptical Plasma Blowout Driven by Highly Asymmetric Flat Beams”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1802-1805. doi:10.18429/JACoW-IPAC2022-WEPOST046
[n]	S. Giordano, “Model Measurements and Correction of Beam Loading Effects in Proton Linacs”, in Proc. LINAC'64, Madison, WI, USA, Jul. 1964, paper PART3-2, pp. 252-265. 
[n]	D. R. Elo, A. R. Carneiro, F. Bierlein, and J. L. Wong, “Mechanical Design of a Regenerative Deflector for the Berkeley 88 - Inch Cyclotron”, in Proc. Cyclotrons'66, Gatlinburg, TN, USA, Aug. 1966, paper B-007, pp. XX-XX. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search