Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. J. Barnes, G. Waters, D. Bishop, and G. D. Wait, “A Pulse Sequencer for the KAON Factory Beam Chopper”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1148-1151.
[n] E. Matias et al., “The Canadian Light Source Control System Lessons Learned From Building a Synchratoron and Beamlines Control System”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P1_023.
[n] J.-P. Carneiro, V. Kamerdzhiev, A. Semenov, and R. C. Webber, “Status of the FNAL Digital Tune Monitor”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMS007, pp. 3877-3879.
[n] S. C. Duarte Pinto, O. R. Jones, L. Ropelewski, J. Spanggaard, and G. Tranquille, “Gas Electron Multipliers for the Antiproton Decelerator”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper TUPD63, pp. 449-451.
[n] W. F. Bergan, I. V. Bazarov, C. J. Duncan, D. L. Rubin, D. Liarte, and J. P. Sethna, “Use of Dimension-Reduction Techniques With Multi-Objective Genetic Algorithms to Improve the Vertical Emittance and Orbit at CESR”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1901-1904. doi:10.18429/JACoW-IPAC2018-WEPAF041
[n] U. Krause, W. Panschow, V. R. W. Schaa, W. Schiebel, P. Schuett, and R. Baer, “The New FAIR Accelerator Complex at GSI: Project, Controls Challenges, and First Steps”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper TOAB01, pp. 59-61.
[n] J. Cai et al., “High Level Software for 4.8 Ghz LHC Schottky System”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP218, pp. 507-509.
[n] I. Verstovsek, S. Peggs, T. Satogata, C. G. Trahern, and K. Zagar, “ESS Controls Strategy and Control Box Concept”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper THPL026, pp. 183-185.
[n] O. Capatina et al., “Cryostat for Testing HIE-ISOLDE Superconducting RF Cavities”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC103, pp. 313-315.
[n] C. Charrondiere et al., “RADE - A Rapid Application Development Framework Used for LHC Hardware Commissioning Tools and Other Accelerator Related Applications”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP097, pp. 868-870.
[n] N. M. Fewell and V. LoDestro, “Operation of the Brookhaven 200-MeV Linac”, in Proc. LINAC'79, Montauk, NY, USA, Sep. 1979, paper S2-4, pp. 83-87.
[n] H. S. Song et al., “Development of 1.5 kW RF Driver for Compact Cyclotron”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper TUPPT030, pp. 218-220.
[n] C. X. Yin, D. K. Liu, M. Liu, S. W. Tang, and L. Y. Zhao, “SSRF Fast Orbit Feedback System Design and Commissioning”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP055, pp. XX-XX.
[n] L. Faillace, R. B. Agustsson, P. Frigola, and A. Verma, “Status of the FERMI II RF Gun at Sincrotrone Trieste”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP116, pp. 692-694.
[n] R. Bossart et al., “Multishot and Multichannel Fast Ejection”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 286-291.
[n] P. L. Morton, J.-L. Pellegrin, T. Raubenheimer, L. Rivkin, M. Ross, and W. L. Spence, “A Diagnostic for Dynamic Aperture”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2291-2294.
[n] L. Scibile et al., “The LHC radiation monitoring system for the environment and safety: from design to operation”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPD030, pp. 514-516.
[n] P. Piot, M. B. Andorf, G. Fagerberg, and M. Figora, “Development of Short Undulators for Electron-Beam-Radiation Interaction Studies”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 380-382. doi:10.18429/JACoW-NAPAC2016-TUPOA47
[n] N. Valverde Alonso et al., “RF Dipole Crab Cavity Testing for HL-LHC”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 687. doi:10.18429/JACoW-SRF2021-WEOCAV03
[n] A. Rubini, S. Nellaga, J. D. Gonzalez Cobas, T. Wlostowski, and F. Vaga, “ZIO: The Ultimate Linux I/O Framework”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOMIB09, pp. 77-80.
[n] H. Wiedemann et al., “The 3 GeV Synchrotron Injector for SPEAR”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2688-2691.
[n] F. Micolon and M. Sosin, “Design of a High-Precision Lifting System for the HL-LHC Heavy Components in the Interaction Region”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 255. doi:10.18429/JACoW-MEDSI2020-WEPA13
[n] S. Redaelli et al., “The LHC Collimator Controls Architecture - Design and Beam Tests”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAN081, pp. 344-346.
[n] N. I. Bolibruch, R. Igarashi, and J. M. Vogt, “Photodiode Calibration using an Electrical Substitution Radiometer in the Hard X-ray Region”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper TUPD83, pp. 500-502.
[n] K. D. Jacobs et al., “The Beam Profile Measuring System at the Bates Linac”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1523-1526.
[n] M. Pezzetti, P. Arpaia, M. Girone, and M. Hubatka, “Active Magnetic Bearings System Upgrade for LHC Cryogenic Cold Compressor, Radiations Mitigation Project (R2E)”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 480-484. doi:10.18429/JACoW-ICALEPCS2015-MOPGF171
[n] S. C. Duarte Pinto and J. Spanggaard, “Gas Electron Multipliers Versus Multi Wire Proportional Chambers”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper TUCL3, pp. 342-345.
[n] H. Reymond, M. F. Gomez De La Cruz, I. T. Matasaho, and A. Rijllart, “The Control System of the CERN Platform for the Test of the High Luminosity LHC Superconducting Magnets”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 918-922. doi:10.18429/JACoW-ICALEPCS2017-TUPHA202
[n] R. Hettel et al., “Design and Characterization of the SSRL Orbit Feedback System”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1580-1583.
[n] G. Gelato and L. Magnani, “Better Dynamic Closed Loop control of the PSB RF Accelerating System”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1536-1539.
[n] E. Matias et al., “ScienceStudio: A Project Status Update”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP105, pp. 880-882.
[n] E. Matias et al., “CLS: A Fully Open-Source Control System”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper ROPA002, pp. 136-139.
[n] S. Mallon Amerigo, P. Martel, S. Petit, and D. Widegren, “CERN's Global Equipment Data Repository”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUB004, pp. 72-74.
[n] H. W. Isch, A. Dupaquier, K. Fischer, F. Forrest, J. Pett, and P. Proudlock, “Switch Mode Power Converters: Present and Future”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1151-1154.
[n] E. S. M. McCrory, N. Eddy, F. G. G. Garcia, S. U. Hansen, T. Kiper, and M. Z. Sliczniak, “BPM Electronics Upgrade for the Fermilab H- Linac Based Upon Custom Downconverter Electronics”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper TUPC15, pp. 396-398.
[n] G. T. Danby and J. W. Jackson, “Theory, Design and Measurement of the Brookhaven Narrow Quadrupoles”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 414-420.
[n] F. Varenne et al., “SPIRAL Facility: Beam Dynamics and Experimental Tests with Stable Ions”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper P2-23, pp. XX-XX.
[n] L. Perrot, P. Blache, and S. Rousselot, “The DESIR Facility at GANIL-SPIRAL2: The Transfer Beam Lines”, in Proc. HB'16, Malmö, Sweden, Jul. 2016, pp. 179-183. doi:10.18429/JACoW-HB2016-MOPL002
[n] D. Boussard, P. Brown, and J. T??ckmantel, “Electroacoustic Instabilities in the LEP2 Superconducting Cavities”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper SRF95F19, pp. 641-645.
[n] C.-Y. Liu, D.-G. Huang, K.-B. Liu, and B. S. Wang, “The Cable Engineering Project for the TPS Power Supply”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWA048, pp. 780-782.
[n] E. Molina Marinas, A. Guirao, L. M. Martinez Fresno, I. Podadera, V. Villamayor, and A. Marqueta, “Status of the LIPAc MEBT Local Control System”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1489-1491. doi:10.18429/JACoW-ICALEPCS2017-THPHA053
[n] L. M. Onischenko et al., “DEVELOPMENT OF COMPACT CYCLOTRON FOR EXPLOSIVES DETECTION BY NUCLEAR RESONANCE ABSORPTION OF GAMMA-RAYS IN NITROGEN”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper WENO02, pp. XX-XX.
[n] T.-Y. Lee, “Feasibility of Non-Metal Vacuum Chamber for Storage Rings”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3411-3413. doi:10.18429/JACoW-IPAC2018-THPAK077
[n] H. Huck, R. Burek, G. Schmidt, and K. Wille, “Improvement and Recent Results of the DELTA Storage Ring FEL”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC011, pp. 88-90.
[n] R. Heine et al., “Thresholds of longitudinal multi-bunch instabilities in double harmonic RF systems”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 2398-2401. doi:10.18429/JACoW-IPAC2025-WEPS076
For LaTeX
Use Complete Form
For BibTeX
References
- M. J. Barnes, G. Waters, D. Bishop, and G. D. Wait, “A Pulse Sequencer for the KAON Factory Beam Chopper”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1148-1151.
- E. Matias et al., “The Canadian Light Source Control System Lessons Learned From Building a Synchratoron and Beamlines Control System”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper P1_023.
- J.-P. Carneiro, V. Kamerdzhiev, A. Semenov, and R. C. Webber, “Status of the FNAL Digital Tune Monitor”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMS007, pp. 3877-3879.
- S. C. Duarte Pinto, O. R. Jones, L. Ropelewski, J. Spanggaard, and G. Tranquille, “Gas Electron Multipliers for the Antiproton Decelerator”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper TUPD63, pp. 449-451.
- W. F. Bergan, I. V. Bazarov, C. J. Duncan, D. L. Rubin, D. Liarte, and J. P. Sethna, “Use of Dimension-Reduction Techniques With Multi-Objective Genetic Algorithms to Improve the Vertical Emittance and Orbit at CESR”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1901-1904.
- U. Krause, W. Panschow, V. R. W. Schaa, W. Schiebel, P. Schuett, and R. Baer, “The New FAIR Accelerator Complex at GSI: Project, Controls Challenges, and First Steps”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper TOAB01, pp. 59-61.
- J. Cai et al., “High Level Software for 4.8 Ghz LHC Schottky System”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP218, pp. 507-509.
- I. Verstovsek, S. Peggs, T. Satogata, C. G. Trahern, and K. Zagar, “ESS Controls Strategy and Control Box Concept”, in Proc. 8th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'10), Saskatoon, Canada, Oct. 2010, paper THPL026, pp. 183-185.
- O. Capatina et al., “Cryostat for Testing HIE-ISOLDE Superconducting RF Cavities”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPC103, pp. 313-315.
- C. Charrondiere et al., “RADE - A Rapid Application Development Framework Used for LHC Hardware Commissioning Tools and Other Accelerator Related Applications”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper THP097, pp. 868-870.
- N. M. Fewell and V. LoDestro, “Operation of the Brookhaven 200-MeV Linac”, in Proc. 1979 Linear Accelerator Conf. (LINAC'79), Montauk, NY, USA, Sep. 1979, paper S2-4, pp. 83-87.
- H. S. Song et al., “Development of 1.5 kW RF Driver for Compact Cyclotron”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper TUPPT030, pp. 218-220.
- C. X. Yin, D. K. Liu, M. Liu, S. W. Tang, and L. Y. Zhao, “SSRF Fast Orbit Feedback System Design and Commissioning”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper THP055, pp. XX-XX.
- L. Faillace, R. B. Agustsson, P. Frigola, and A. Verma, “Status of the FERMI II RF Gun at Sincrotrone Trieste”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP116, pp. 692-694.
- R. Bossart et al., “Multishot and Multichannel Fast Ejection”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 286-291.
- P. L. Morton, J.-L. Pellegrin, T. Raubenheimer, L. Rivkin, M. Ross, and W. L. Spence, “A Diagnostic for Dynamic Aperture”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2291-2294.
- L. Scibile et al., “The LHC radiation monitoring system for the environment and safety: from design to operation”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPD030, pp. 514-516.
- P. Piot, M. B. Andorf, G. Fagerberg, and M. Figora, “Development of Short Undulators for Electron-Beam-Radiation Interaction Studies”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 380-382.
- N. Valverde Alonso et al., “RF Dipole Crab Cavity Testing for HL-LHC”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 687.
- A. Rubini, S. Nellaga, J. D. Gonzalez Cobas, T. Wlostowski, and F. Vaga, “ZIO: The Ultimate Linux I/O Framework”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOMIB09, pp. 77-80.
- H. Wiedemann et al., “The 3 GeV Synchrotron Injector for SPEAR”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2688-2691.
- F. Micolon and M. Sosin, “Design of a High-Precision Lifting System for the HL-LHC Heavy Components in the Interaction Region”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 255.
- S. Redaelli et al., “The LHC Collimator Controls Architecture - Design and Beam Tests”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAN081, pp. 344-346.
- N. I. Bolibruch, R. Igarashi, and J. M. Vogt, “Photodiode Calibration using an Electrical Substitution Radiometer in the Hard X-ray Region”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper TUPD83, pp. 500-502.
- K. D. Jacobs et al., “The Beam Profile Measuring System at the Bates Linac”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1523-1526.
- M. Pezzetti, P. Arpaia, M. Girone, and M. Hubatka, “Active Magnetic Bearings System Upgrade for LHC Cryogenic Cold Compressor, Radiations Mitigation Project (R2E)”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 480-484.
- S. C. Duarte Pinto and J. Spanggaard, “Gas Electron Multipliers Versus Multi Wire Proportional Chambers”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper TUCL3, pp. 342-345.
- H. Reymond, M. F. Gomez De La Cruz, I. T. Matasaho, and A. Rijllart, “The Control System of the CERN Platform for the Test of the High Luminosity LHC Superconducting Magnets”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 918-922.
- R. Hettel et al., “Design and Characterization of the SSRL Orbit Feedback System”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1580-1583.
- G. Gelato and L. Magnani, “Better Dynamic Closed Loop control of the PSB RF Accelerating System”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1536-1539.
- E. Matias et al., “ScienceStudio: A Project Status Update”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper THP105, pp. 880-882.
- E. Matias et al., “CLS: A Fully Open-Source Control System”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper ROPA002, pp. 136-139.
- S. Mallon Amerigo, P. Martel, S. Petit, and D. Widegren, “CERN's Global Equipment Data Repository”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper TUB004, pp. 72-74.
- H. W. Isch, A. Dupaquier, K. Fischer, F. Forrest, J. Pett, and P. Proudlock, “Switch Mode Power Converters: Present and Future”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1151-1154.
- E. S. M. McCrory, N. Eddy, F. G. G. Garcia, S. U. Hansen, T. Kiper, and M. Z. Sliczniak, “BPM Electronics Upgrade for the Fermilab H- Linac Based Upon Custom Downconverter Electronics”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper TUPC15, pp. 396-398.
- G. T. Danby and J. W. Jackson, “Theory, Design and Measurement of the Brookhaven Narrow Quadrupoles”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 414-420.
- F. Varenne et al., “SPIRAL Facility: Beam Dynamics and Experimental Tests with Stable Ions”, in Proc. 16th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'01), East Lansing, MI, USA, May 2001, paper P2-23, pp. XX-XX.
- L. Perrot, P. Blache, and S. Rousselot, “The DESIR Facility at GANIL-SPIRAL2: The Transfer Beam Lines”, in Proc. 57th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'16), Malmö, Sweden, Jul. 2016, pp. 179-183.
- D. Boussard, P. Brown, and J. T??ckmantel, “Electroacoustic Instabilities in the LEP2 Superconducting Cavities”, in Proc. 7th Int. Conf. RF Superconductivity (SRF'95), Gif-sur-Yvette, France, Oct. 1995, paper SRF95F19, pp. 641-645.
- C.-Y. Liu, D.-G. Huang, K.-B. Liu, and B. S. Wang, “The Cable Engineering Project for the TPS Power Supply”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPWA048, pp. 780-782.
- E. Molina Marinas, A. Guirao, L. M. Martinez Fresno, I. Podadera, V. Villamayor, and A. Marqueta, “Status of the LIPAc MEBT Local Control System”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1489-1491.
- L. M. Onischenko et al., “DEVELOPMENT OF COMPACT CYCLOTRON FOR EXPLOSIVES DETECTION BY NUCLEAR RESONANCE ABSORPTION OF GAMMA-RAYS IN NITROGEN”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper WENO02, pp. XX-XX.
- T.-Y. Lee, “Feasibility of Non-Metal Vacuum Chamber for Storage Rings”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3411-3413.
- H. Huck, R. Burek, G. Schmidt, and K. Wille, “Improvement and Recent Results of the DELTA Storage Ring FEL”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPC011, pp. 88-90.
- R. Heine et al., “Thresholds of longitudinal multi-bunch instabilities in double harmonic RF systems”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPS076, pp. 2398-2401.
Back to search