Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] S. Ghosh, A. Mandal, S. Seth, and S. S. Som, “Bead-pull Measurement using Phase-Shift Technique in Multi-cell Elliptical Cavity”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC088, pp. 280-282.
[n] G. H. Wei, K. Hirano, T. Maruta, A. Miura, and K. Ikegami, “Dependence of Beam Loss on Vacuum Pressure Level in J-PARC Linac”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPS048, pp. 2598-2600.
[n] A. Grudiev and D. Schulte, “The Accelerating Structure for a 500 GeV CLIC”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper MOP023, pp. 100-102.
[n] S. A. Bogacz, A. Latina, D. Schulte, and D. Pellegrini, “LHeC ERL Design and Beam-Dynamics Issues”, in Proc. ERL'15, Stony Brook, NY, USA, Jun. 2015, pp. 15-19. doi:10.18429/JACoW-ERL2015-TUIBLH2026
[n] H. D. Guo et al., “The Optimization Design and Output Characteristic Analysis of Ionization Chamber Dose Monitor in HUST-PTF”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 440-442. doi:10.18429/JACoW-IBIC2017-WEPCF09
[n] I. Pinayev, J. Rose, T. V. Shaftan, and L.-H. Yu, “Injection Simulations for NSLS-II Storage Ring”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMS077, pp. 1350-1352.
[n] S. L. Hoobler et al., “Design and Commissioning Results of MicroTCA Stripline BPM System”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 180-183. doi:10.18429/JACoW-ICALEPCS2015-MOPGF038
[n] A. Abrami, M. De Marco, M. Lonza, and D. Vittor, “YAMS: a Stepper Motor Controller for the FERMI@Elettra Free Electron Laser”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMN034, pp. 958-960.
[n] P. Elleaume, “ESRF Insertion Devices”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1061-1064.
[n] B. Kulke et al., “Test Results from the LLNL 250 GHz CARM Experiment”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 766-769.
[n] V. G. Dudnikov, M. A. Cummings, and R. P. Johnson, “Rapid Surface Microanalysis Using a Low Temperature Plasma”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3440-3442. doi:10.18429/JACoW-IPAC2021-WEPAB328
[n] Z. Wang et al., “Buffered chemical polishing process for SHINE 3.9 GHz cavities”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2798-2801. doi:10.18429/JACoW-IPAC2024-WEPS46
[n] B. Simon, R. Maier, and G. Wuestefeld, “Analysis of the Triple Bend Achromat as a Lattice for BESSY II”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 875-878.
[n] S. V. Kuzikov, S. P. Antipov, E. Gomez, and A. A. Vikharev, “High-Gradient Short Pulse Accelerating Structures”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 500-502. doi:10.18429/JACoW-NAPAC2019-TUPLH07
[n] I. Ben-Zvi et al., “A Superconducting Short Period Undulator for a Harmonic Generation FEL Experiment”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1439-1442.
[n] C. D. Nantista, W. R. Fowkes, N. M. Kroll, and S. G. Tantawi, “Planar Waveguide Hybrids for Very High Power RF”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA153, pp. 1432-1434.
[n] N. V. Markov, A. Golubev, A. V. Kantsyrev, and I. Roudskoy, “Radiobiological Research with Charged Particles Beams in ITEP”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper WECA02, pp. 128-130.
[n] A. G. Ruggiero and J. Wei, “Conversion of Power and Frequency”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 587-590.
[n] V. V. Danilov and Z. Liu, “Studies of the Effect of 2nd Harmonic on the e-p Instability and RF Control of Instabilities”, in Proc. HB'10, Morschach, Switzerland, Sep.-Oct. 2010, paper TUO1C06, pp. 373-376.
[n] G. Decker and O. Singh, “Strategy for Achieving True Sub-Micron Orbit Stabilization at the Advanced Photon Source”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WOPA003, pp. 390-392.
[n] Y.-C. Chao, “Distributed Matching Scheme and a Flexible Deterministic Matching Algorithm for Arbitrary Systems”, in Proc. ICAP'15, Shanghai, China, Oct. 2015, pp. 160-163. doi:10.18429/JACoW-ICAP2015-THCWC3
[n] J. R. Delayen, “RF Properties of Superconducting Pb Electroplated onto Cu”, in Proc. SRF'87, Lemont, IL, USA, Sep. 1987, paper SRF87E02, pp. XX-XX.
[n] K. F. Mulholland, J. Knudstrup, and F. Pellegrin, “A New Communication Interface for the European Southern Observatory (ESO)'s Very Large Telescope Technical Detector Control System Using Aravis, an Open-Source Library for GenICam Cameras”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 443. doi:10.18429/JACoW-ICALEPCS2019-MOPHA098
[n] K. Schrock, M. P. J. Gaudreau, and M. K. Kempkes, “Components of Heating and Fueling of Fusion Plasmas”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWA066, pp. 831-833.
[n] Y. Le Goc et al., “Prototype of a Simple ZeroMQ-Based RPC in Replacement of CORBA in NOMAD”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC042, pp. 654-657.
For LaTeX
Use Complete Form
For BibTeX
References
- S. Ghosh, A. Mandal, S. Seth, and S. S. Som, “Bead-pull Measurement using Phase-Shift Technique in Multi-cell Elliptical Cavity”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPC088, pp. 280-282.
- G. H. Wei, K. Hirano, T. Maruta, A. Miura, and K. Ikegami, “Dependence of Beam Loss on Vacuum Pressure Level in J-PARC Linac”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPS048, pp. 2598-2600.
- A. Grudiev and D. Schulte, “The Accelerating Structure for a 500 GeV CLIC”, in Proc. 25th Linear Accelerator Conf. (LINAC'10), Tsukuba, Japan, Sep. 2010, paper MOP023, pp. 100-102.
- S. A. Bogacz, A. Latina, D. Schulte, and D. Pellegrini, “LHeC ERL Design and Beam-Dynamics Issues”, in Proc. 56th Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'15), Stony Brook, NY, USA, Jun. 2015, pp. 15-19.
- H. D. Guo et al., “The Optimization Design and Output Characteristic Analysis of Ionization Chamber Dose Monitor in HUST-PTF”, in Proc. 6th Int. Beam Instrumentation Conf. (IBIC'17), Grand Rapids, MI, USA, Aug. 2017, pp. 440-442.
- I. Pinayev, J. Rose, T. V. Shaftan, and L.-H. Yu, “Injection Simulations for NSLS-II Storage Ring”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPMS077, pp. 1350-1352.
- S. L. Hoobler et al., “Design and Commissioning Results of MicroTCA Stripline BPM System”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 180-183.
- A. Abrami, M. De Marco, M. Lonza, and D. Vittor, “YAMS: a Stepper Motor Controller for the FERMI@Elettra Free Electron Laser”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPMN034, pp. 958-960.
- P. Elleaume, “ESRF Insertion Devices”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1061-1064.
- B. Kulke et al., “Test Results from the LLNL 250 GHz CARM Experiment”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 766-769.
- V. G. Dudnikov, M. A. Cummings, and R. P. Johnson, “Rapid Surface Microanalysis Using a Low Temperature Plasma”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3440-3442.
- Z. Wang et al., “Buffered chemical polishing process for SHINE 3.9 GHz cavities”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPS46, pp. 2798-2801.
- B. Simon, R. Maier, and G. Wuestefeld, “Analysis of the Triple Bend Achromat as a Lattice for BESSY II”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 875-878.
- S. V. Kuzikov, S. P. Antipov, E. Gomez, and A. A. Vikharev, “High-Gradient Short Pulse Accelerating Structures”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 500-502.
- I. Ben-Zvi et al., “A Superconducting Short Period Undulator for a Harmonic Generation FEL Experiment”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1439-1442.
- C. D. Nantista, W. R. Fowkes, N. M. Kroll, and S. G. Tantawi, “Planar Waveguide Hybrids for Very High Power RF”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUA153, pp. 1432-1434.
- N. V. Markov, A. Golubev, A. V. Kantsyrev, and I. Roudskoy, “Radiobiological Research with Charged Particles Beams in ITEP”, in Proc. 24th Russian Particle Accelerator Conf. (RuPAC'14), Obninsk, Russia, Oct. 2014, paper WECA02, pp. 128-130.
- A. G. Ruggiero and J. Wei, “Conversion of Power and Frequency”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 587-590.
- V. V. Danilov and Z. Liu, “Studies of the Effect of 2nd Harmonic on the e-p Instability and RF Control of Instabilities”, in Proc. 46th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'10), Morschach, Switzerland, Sep.-Oct. 2010, paper TUO1C06, pp. 373-376.
- G. Decker and O. Singh, “Strategy for Achieving True Sub-Micron Orbit Stabilization at the Advanced Photon Source”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WOPA003, pp. 390-392.
- Y.-C. Chao, “Distributed Matching Scheme and a Flexible Deterministic Matching Algorithm for Arbitrary Systems”, in Proc. 12th Int. Computational Accelerator Physics Conf. (ICAP'15), Shanghai, China, Oct. 2015, pp. 160-163.
- J. R. Delayen, “RF Properties of Superconducting Pb Electroplated onto Cu”, in Proc. 3rd Int. Conf. RF Superconductivity (SRF'87), Lemont, IL, USA, Sep. 1987, paper SRF87E02, pp. XX-XX.
- K. F. Mulholland, J. Knudstrup, and F. Pellegrin, “A New Communication Interface for the European Southern Observatory (ESO)'s Very Large Telescope Technical Detector Control System Using Aravis, an Open-Source Library for GenICam Cameras”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 443.
- K. Schrock, M. P. J. Gaudreau, and M. K. Kempkes, “Components of Heating and Fueling of Fusion Plasmas”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPWA066, pp. 831-833.
- Y. Le Goc et al., “Prototype of a Simple ZeroMQ-Based RPC in Replacement of CORBA in NOMAD”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC042, pp. 654-657.
Back to search