Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] X. Escaler, D. Juan Garcia, J. J. Casas, C. Colldelram, M. Prieto, and M. Quispe, “Numerical Simulation of the ALBA Synchrotron Light Source Cooling System Response to Pump Start-Up and Shut-Down”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 187-190. doi:10.18429/JACoW-MEDSI2016-TUPE13
[n] R. Veness et al., “Overview of beam intensity issues and mitigations in the CERN-SPS fast wire scanners”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2248-2251. doi:10.18429/JACoW-IPAC2024-WEPG26
[n] W. J. Goscinski et al., “MASSIVE: an HPC Collaboration to Underpin Synchrotron Science”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 640-644. doi:10.18429/JACoW-ICALEPCS2015-WED3O01
[n] L. Maci?â, J. J. Casas, C. Colldelram, and M. Quispe, “Hydraulic Failure Caused by Air in Pipelines of the Experimental Area Ring of ALBA Synchrotron Light Source: Research, Simulations and Solutions”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 105-107. doi:10.18429/JACoW-MEDSI2016-MOPE43
[n] F. Sakamoto et al., “Beam Generation and Acceleration Experiments of X-Band Linac and Monochromatic keV X-Ray Source of the University of Tokyo”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN032, pp. 2784-2786.
[n] C. G. Trahern et al., “Design of the Commissioning Software for the AGS to RHIC Transfer Line”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPR20, pp. 2279-2281.
[n] R. D. Ryne, “Advanced Computing Tools and Models for Accelerator Physics”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THYM03, pp. 2947-2951.
[n] C. Qian et al., “LECR5 Development and Status Report”, in Proc. ECRIS'20, East Lansing, MI, USA, Sep. 2020, pp. 6-9. doi:10.18429/JACoW-ECRIS2020-MOWZO02
[n] M. Audrain et al., “Supervision Software for the Integration of the Beam Interlock System with the CERN Accelerator Complex”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 476-478. doi:10.18429/JACoW-IPAC2014-MOPME046
[n] G. M. Bruhaug and K. Carlson, “The Design and Construction of a Resonance Control System for the IOTA RF Cavity”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 432-434. doi:10.18429/JACoW-NAPAC2016-TUPOA74
[n] G. Dutto et al., “The Upgrading of the TRIUMF Facility to 500 muA Operation”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 326-329.
[n] S. F. Xu, X. Y. He, P. Wang, W. Wang, and Q. Y. Yao, “Analysis of Tidal Effects on Measurement Accuracy of HLS”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPME027, pp. 2989-2991.
[n] R. B. Yoder et al., “First Acceleration in a Resonant Optical-Scale Laser-Powered Structure”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2624-2626. doi:10.18429/JACoW-IPAC2015-WEPWA053
[n] P. Savage, Y. A. Cheng, A. P. Letchford, and J. K. Pozimski, “Mechanical Design and RF Measurement on RFQ for Front-end Test Stand at RAL”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH117, pp. 318-320.
[n] E. M. Laziev and V. M. Tsakanov, “A Few Aspects of Excitation of Wake Waves in Accelerating Structures”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper TH3-54, pp. 578-579.
[n] P. Chevtsov and V. Vrankovic, “Magnet Measurement System Upgrade at PSI”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper WPO032, pp. 111-113.
[n] L. Ahle et al., “Current Status of the Recirculator Project at LLNL”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THP124, pp. 3248-3250.
[n] K. A. Brown et al., “A Scanning Target Profile Monitor for the Slow Extracted Beam at the AGS”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5P046, pp. 2149-2151.
[n] A. Ballarino, “Prospects for the use of HTS in High-field Magnets for Future Accelerator Facilities”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 974-979. doi:10.18429/JACoW-IPAC2014-TUZB02
[n] B. Jeram et al., “The Control System for the Accelerator of ANKA”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP02E, pp. 1691-1693.
[n] A. Matheisen et al., “Investigation on Cavity String Assembly and Repair”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper TUPO041, pp. 472-475.
[n] L. Bertolini et al., “Design of the Linear Non-Evaporable Getter Pump for the PEP-II B-Factory”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4P016, pp. 3622-3624.
[n] A. N. Johnson and R. Lange, “Evolutionary Plans For EPICS Version 3”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEA003, pp. 364-366.
[n] U. Wienands et al., “Status of the High Energy Ring of the PEP II B-Factory”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAA04, pp. 530-532.
[n] K. E. Robins et al., “Operating Experience with the Heub Superconducting Dipoles”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1320-1323.
[n] G. Velev et al., “Measurements of Field Decay and Snapback Effect on Tevatron Dipole Magnets”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAE016, pp. 1972-1974.
[n] E. F. Wilson, “Machine History Viewer for the Integrated Computer Control System of the National Ignition Facility”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC128, pp. 883-886.
[n] H. K. Jeong, T. Lee, and M. Yoon, “Measurement of Beta and Dispersion Functions in the PLS Storage ring”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP092G, pp. 1420-1422.
[n] S. Biedron, J. W. Lewellen, and M. Virgo, “High-Average, High-Peak Current Injector Design”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper THPP057, pp. XX-XX.
[n] V. Gubaidulin, A. Gamelin, and R. Nagaoka, “Beam-ion Instabilities and Their Mitigation for SOLEIL II”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2650-2653. doi:10.18429/JACoW-IPAC2023-WEPA004
[n] G. LeMeur and F. Touze, “PRIAM/ANTIGONC:Documents and SettingsSaraMy DocumentsPAC Work a 2D/3D Package for Acclerator Design”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1321-1324.
[n] M. Zach et al., “Auxiliary Accelerating System for TRIUMF Cyclotron”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 973-976.
[n] E. Trakhtenberg, E. Gluskin, P. Den Hartog, T. Klippert, G. Wiemerslage, and S. Xu, “The Vacuum System for Insertion Devices at the Advanced Photon Source”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPP16, pp. 2072-2074.
[n] A. V. Tsakanian et al., “AREAL Solenoid, Dipole and Steering Magnets Design and Performance”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1223-1225. doi:10.18429/JACoW-IPAC2014-TUPRO078
[n] S. Adam, W. Joho, and C. J. Kost, “Longitudinal Space-Charge-Effects in the SIN Injector II and the SIN Ring Cyclotron”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper EP-40, pp. 529-531.
[n] P. Catravas et al., “Beam Profile Measurement at 30 GeV using Optical Transition Radiation”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA100, pp. 2111-2113.
[n] T. Lee and M. Yoon, “Measurement and Control of Linear Coupling in the PLS Storage Ring”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP093G, pp. 1423-1425.
[n] M. Plesko and G. Tkacik, “Where and What Exactly is 'Knowledge' in Control Systems”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WE101, pp. XX-XX.
[n] M. A. Brubaker, C. A. Ekdahl, and C. P. Yakymyshyn, “Electro-Optic Beam Position and Pulsed Power Monitors for the Second Axis of DARHT”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper ROAB007, pp. 534-538.
[n] F. Furuta et al., “Updates of Vertical Electropolishing Studies at Cornell with KEK and Marui Galvanizing Co. Ltd .”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 208-210. doi:10.18429/JACoW-NAPAC2016-MOPOB61
[n] K. T. Kim, J. J. Bellister, K. H. Kim, E. Williams, and S. Zelazny, “Integrate EPICS 7 with MATLAB Using PVAccess for Python (P4P) Module”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1580-1584. doi:10.18429/JACoW-ICALEPCS2023-THSDSC03
[n] G. Gaitan et al., “Development of a CVD System for Next-Generation SRF Cavities”, in Proc. NAPAC'22, Albuquerque, NM, USA, Aug. 2022, pp. 372-374. doi:10.18429/JACoW-NAPAC2022-TUPA15
[n] T. Watanabe, N. Fukunishi, O. Kamigaito, M. Kase, and Y. Sasaki, “Improvement of Beam Current Monitor with High Tc Current Sensor and SQUID at the RIBF”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC105, pp. 1260-1262.
[n] G. V. Stupakov and S. A. Heifets, “Model of the CSR Induced Bursts in Slicing Experiments”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS097, pp. 3502-3504.
[n] Z. Parsa and L. Young, “On Design and Analysis of a High Brightness Electron Source”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 679-682.
[n] A. Abrami, M. De Marco, M. Lonza, and D. Vittor, “YAMS: a Stepper Motor Controller for the FERMI@Elettra Free Electron Laser”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMN034, pp. 958-960.
[n] J. Qiang, R. D. Ryne, and Y. Hao, “Benchmark of Strong-Strong Beam-Beam Simulation of the Kink Instability in an Electron Ion Collider Design”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 628-631. doi:10.18429/JACoW-NAPAC2016-TUPOB62
[n] T. Enegren, R. L. Poirier, and W. R. Smythe, “Coupled Transmission Line Higher Order Mode Damper”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 979-982.
[n] S. Ramamoorthy, P. Pearson, and J. Smith, “Error Handling in the NSLS Control System”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPR07, pp. 2250-2252.
[n] S. Yamada et al., “HIMAC and Medical Accelerator Projects in Japan”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 7C001, pp. 885-889.
[n] R. Kato, G. I. Isoyama, S. K. Kashiwagi, S. Suemine, and T. Yamamoto, “Upgrade of the L-Band Linac at ISIR, Osaka University for a Far-Infrared FEL”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper TUPOS26, pp. XX-XX.
[n] M. Tigner and P. Dahl, “The SSC Status Outlook”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 2003-2008.
[n] T. Sieber et al., “Bunch Shape Measurements at the GSI CW-Linac Prototype”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2091-2094. doi:10.18429/JACoW-IPAC2018-WEPAK006
[n] D. Reggiani et al., “A Macro-Pulsed 1.2 MW Proton Beam for the PSI Ultra Cold Neutron Source”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6RFP086, pp. 1748-1750.
[n] D. T. Abell, G. I. Bell, I. Ben-Zvi, D. L. Bruhwiler, J. Kewisch, and R. D. Ryne, “Modeling of Non-linear Effects in RF Cavities”, in Proc. HB'06, Tsukuba, Japan, May-Jun. 2006, paper WEBX03, pp. XX-XX.
[n] R. I. Saban et al., “Coordination of the Commissioning of the LHC Technical Systems”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC118, pp. 340-342.
[n] A. V. Tollestrup, R. H. Flora, K. Koepke, and R. E. Peters, “Coil Extension, Deformation and Compression during Excitation in Superconducting Accelerator Dipole Magnets”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1331-1334.
[n] K. Gross et al., “Bunch-by-Bunch Longitudinal RF Feedback for Beam Stabilization at FAIR”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 820-822. doi:10.18429/JACoW-IPAC2015-MOPHA021
[n] S. H. Kim, K. Kim, K. M. Thompson, and L. R. Turner, “Design and Measurement of the Sextupole Magnet for the APS Storage Ring”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2814-2817.
[n] T. Ebeling et al., “Processing of TTF Cavities at DESY”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper TUP07, pp. 293-296.
[n] H.-W. Glock et al., “Design of the Beamline Elements in the BESSY VSR Cold String”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4123-4126. doi:10.18429/JACoW-IPAC2018-THPMF033
[n] E. Hoyt, M. Hoyt, R. Kirby, C. Perkins, D. Wright, and A. Farvid, “Processing of O.F.E. Copper Beam Chambers for PEP-II High Energy Ring”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPP09, pp. 2054-2056.
[n] T. S. Paik, E. F. Wilson, and E. A. Tekle, “CAD Model and Visual Assisted Control System for NIF Target Area Positioners”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper WOAB02, pp. 293-295.
[n] J. Qiang, R. D. Ryne, M. Venturini, and A. Zholents, “Billion Particle Linac Simulations for Future Light Sources”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper FR105, pp. 1110-1113.
[n] X. Wu, Y. C. He, J. Liu, C. H. Wang, and J. C. Wang, “Design and Implementation of the Remote Control System of the Digital Magnet Power Supply of China Spallation Neutron Source”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPEA010, pp. 3167-3169.
[n] C. Adolphsen et al., “Pulse to Pulse Stability Issues in the SLC”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAG11, pp. 646-648.
[n] G. Lanfranco et al., “Development of Ultra-High Quality Surface Finish Undulator Vacuum Chambers for the FERMI@Elettra Project”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPD023, pp. 3138-3140.
[n] F. Yan et al., “The investigation of cavity frequency instability induced by vibrations”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 184-186. doi:10.18429/JACoW-IPAC2023-MOPA068
For LaTeX
Use Complete Form
For BibTeX
References
- X. Escaler, D. Juan Garcia, J. J. Casas, C. Colldelram, M. Prieto, and M. Quispe, “Numerical Simulation of the ALBA Synchrotron Light Source Cooling System Response to Pump Start-Up and Shut-Down”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 187-190.
- R. Veness et al., “Overview of beam intensity issues and mitigations in the CERN-SPS fast wire scanners”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPG26, pp. 2248-2251.
- W. J. Goscinski et al., “MASSIVE: an HPC Collaboration to Underpin Synchrotron Science”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 640-644.
- L. Maci?â, J. J. Casas, C. Colldelram, and M. Quispe, “Hydraulic Failure Caused by Air in Pipelines of the Experimental Area Ring of ALBA Synchrotron Light Source: Research, Simulations and Solutions”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 105-107.
- F. Sakamoto et al., “Beam Generation and Acceleration Experiments of X-Band Linac and Monochromatic keV X-Ray Source of the University of Tokyo”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMN032, pp. 2784-2786.
- C. G. Trahern et al., “Design of the Commissioning Software for the AGS to RHIC Transfer Line”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPR20, pp. 2279-2281.
- R. D. Ryne, “Advanced Computing Tools and Models for Accelerator Physics”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THYM03, pp. 2947-2951.
- C. Qian et al., “LECR5 Development and Status Report”, in Proc. 24th International Workshop on ECR Ion Sources (ECRIS'20), East Lansing, MI, USA, Sep. 2020, paper MOWZO02, pp. 6-9.
- M. Audrain et al., “Supervision Software for the Integration of the Beam Interlock System with the CERN Accelerator Complex”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 476-478.
- G. M. Bruhaug and K. Carlson, “The Design and Construction of a Resonance Control System for the IOTA RF Cavity”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 432-434.
- G. Dutto et al., “The Upgrading of the TRIUMF Facility to 500 muA Operation”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 326-329.
- S. F. Xu, X. Y. He, P. Wang, W. Wang, and Q. Y. Yao, “Analysis of Tidal Effects on Measurement Accuracy of HLS”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPME027, pp. 2989-2991.
- R. B. Yoder et al., “First Acceleration in a Resonant Optical-Scale Laser-Powered Structure”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2624-2626.
- P. Savage, Y. A. Cheng, A. P. Letchford, and J. K. Pozimski, “Mechanical Design and RF Measurement on RFQ for Front-end Test Stand at RAL”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH117, pp. 318-320.
- E. M. Laziev and V. M. Tsakanov, “A Few Aspects of Excitation of Wake Waves in Accelerating Structures”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper TH3-54, pp. 578-579.
- P. Chevtsov and V. Vrankovic, “Magnet Measurement System Upgrade at PSI”, in Proc. 10th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'14), Karlsruhe, Germany, Oct. 2014, paper WPO032, pp. 111-113.
- L. Ahle et al., “Current Status of the Recirculator Project at LLNL”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THP124, pp. 3248-3250.
- K. A. Brown et al., “A Scanning Target Profile Monitor for the Slow Extracted Beam at the AGS”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 5P046, pp. 2149-2151.
- A. Ballarino, “Prospects for the use of HTS in High-field Magnets for Future Accelerator Facilities”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 974-979.
- B. Jeram et al., “The Control System for the Accelerator of ANKA”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP02E, pp. 1691-1693.
- A. Matheisen et al., “Investigation on Cavity String Assembly and Repair”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper TUPO041, pp. 472-475.
- L. Bertolini et al., “Design of the Linear Non-Evaporable Getter Pump for the PEP-II B-Factory”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 4P016, pp. 3622-3624.
- A. N. Johnson and R. Lange, “Evolutionary Plans For EPICS Version 3”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEA003, pp. 364-366.
- U. Wienands et al., “Status of the High Energy Ring of the PEP II B-Factory”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RAA04, pp. 530-532.
- K. E. Robins et al., “Operating Experience with the Heub Superconducting Dipoles”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1320-1323.
- G. Velev et al., “Measurements of Field Decay and Snapback Effect on Tevatron Dipole Magnets”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPAE016, pp. 1972-1974.
- E. F. Wilson, “Machine History Viewer for the Integrated Computer Control System of the National Ignition Facility”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC128, pp. 883-886.
- H. K. Jeong, T. Lee, and M. Yoon, “Measurement of Beta and Dispersion Functions in the PLS Storage ring”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP092G, pp. 1420-1422.
- S. Biedron, J. W. Lewellen, and M. Virgo, “High-Average, High-Peak Current Injector Design”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper THPP057, pp. XX-XX.
- V. Gubaidulin, A. Gamelin, and R. Nagaoka, “Beam-ion Instabilities and Their Mitigation for SOLEIL II”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA004, pp. 2650-2653.
- G. LeMeur and F. Touze, “PRIAM/ANTIGONC:Documents and SettingsSaraMy DocumentsPAC Work a 2D/3D Package for Acclerator Design”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1321-1324.
- M. Zach et al., “Auxiliary Accelerating System for TRIUMF Cyclotron”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 973-976.
- E. Trakhtenberg, E. Gluskin, P. Den Hartog, T. Klippert, G. Wiemerslage, and S. Xu, “The Vacuum System for Insertion Devices at the Advanced Photon Source”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPP16, pp. 2072-2074.
- A. V. Tsakanian et al., “AREAL Solenoid, Dipole and Steering Magnets Design and Performance”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1223-1225.
- S. Adam, W. Joho, and C. J. Kost, “Longitudinal Space-Charge-Effects in the SIN Injector II and the SIN Ring Cyclotron”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper EP-40, pp. 529-531.
- P. Catravas et al., “Beam Profile Measurement at 30 GeV using Optical Transition Radiation”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEA100, pp. 2111-2113.
- T. Lee and M. Yoon, “Measurement and Control of Linear Coupling in the PLS Storage Ring”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP093G, pp. 1423-1425.
- M. Plesko and G. Tkacik, “Where and What Exactly is 'Knowledge' in Control Systems”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper WE101, pp. XX-XX.
- M. A. Brubaker, C. A. Ekdahl, and C. P. Yakymyshyn, “Electro-Optic Beam Position and Pulsed Power Monitors for the Second Axis of DARHT”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper ROAB007, pp. 534-538.
- F. Furuta et al., “Updates of Vertical Electropolishing Studies at Cornell with KEK and Marui Galvanizing Co. Ltd .”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 208-210.
- K. T. Kim, J. J. Bellister, K. H. Kim, E. Williams, and S. Zelazny, “Integrate EPICS 7 with MATLAB Using PVAccess for Python (P4P) Module”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper THSDSC03, pp. 1580-1584.
- G. Gaitan et al., “Development of a CVD System for Next-Generation SRF Cavities”, in Proc. North American Particle Accelerator Conf. (NAPAC'22), Albuquerque, NM, USA, Aug. 2022, pp. 372-374.
- T. Watanabe, N. Fukunishi, O. Kamigaito, M. Kase, and Y. Sasaki, “Improvement of Beam Current Monitor with High Tc Current Sensor and SQUID at the RIBF”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC105, pp. 1260-1262.
- G. V. Stupakov and S. A. Heifets, “Model of the CSR Induced Bursts in Slicing Experiments”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPLS097, pp. 3502-3504.
- Z. Parsa and L. Young, “On Design and Analysis of a High Brightness Electron Source”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 679-682.
- A. Abrami, M. De Marco, M. Lonza, and D. Vittor, “YAMS: a Stepper Motor Controller for the FERMI@Elettra Free Electron Laser”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPMN034, pp. 958-960.
- J. Qiang, R. D. Ryne, and Y. Hao, “Benchmark of Strong-Strong Beam-Beam Simulation of the Kink Instability in an Electron Ion Collider Design”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 628-631.
- T. Enegren, R. L. Poirier, and W. R. Smythe, “Coupled Transmission Line Higher Order Mode Damper”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 979-982.
- S. Ramamoorthy, P. Pearson, and J. Smith, “Error Handling in the NSLS Control System”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPR07, pp. 2250-2252.
- S. Yamada et al., “HIMAC and Medical Accelerator Projects in Japan”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 7C001, pp. 885-889.
- R. Kato, G. I. Isoyama, S. K. Kashiwagi, S. Suemine, and T. Yamamoto, “Upgrade of the L-Band Linac at ISIR, Osaka University for a Far-Infrared FEL”, in Proc. 26th Int. Free Electron Laser Conf. & 11th FEL Users Workshop (FEL'04), Trieste, Italy, Aug.-Sep. 2004, paper TUPOS26, pp. XX-XX.
- M. Tigner and P. Dahl, “The SSC Status Outlook”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 2003-2008.
- T. Sieber et al., “Bunch Shape Measurements at the GSI CW-Linac Prototype”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2091-2094.
- D. Reggiani et al., “A Macro-Pulsed 1.2 MW Proton Beam for the PSI Ultra Cold Neutron Source”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6RFP086, pp. 1748-1750.
- D. T. Abell, G. I. Bell, I. Ben-Zvi, D. L. Bruhwiler, J. Kewisch, and R. D. Ryne, “Modeling of Non-linear Effects in RF Cavities”, in Proc. 39th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'06), Tsukuba, Japan, May-Jun. 2006, paper WEBX03, pp. XX-XX.
- R. I. Saban et al., “Coordination of the Commissioning of the LHC Technical Systems”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPC118, pp. 340-342.
- A. V. Tollestrup, R. H. Flora, K. Koepke, and R. E. Peters, “Coil Extension, Deformation and Compression during Excitation in Superconducting Accelerator Dipole Magnets”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1331-1334.
- K. Gross et al., “Bunch-by-Bunch Longitudinal RF Feedback for Beam Stabilization at FAIR”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 820-822.
- S. H. Kim, K. Kim, K. M. Thompson, and L. R. Turner, “Design and Measurement of the Sextupole Magnet for the APS Storage Ring”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2814-2817.
- T. Ebeling et al., “Processing of TTF Cavities at DESY”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper TUP07, pp. 293-296.
- H.-W. Glock et al., “Design of the Beamline Elements in the BESSY VSR Cold String”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4123-4126.
- E. Hoyt, M. Hoyt, R. Kirby, C. Perkins, D. Wright, and A. Farvid, “Processing of O.F.E. Copper Beam Chambers for PEP-II High Energy Ring”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPP09, pp. 2054-2056.
- T. S. Paik, E. F. Wilson, and E. A. Tekle, “CAD Model and Visual Assisted Control System for NIF Target Area Positioners”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper WOAB02, pp. 293-295.
- J. Qiang, R. D. Ryne, M. Venturini, and A. Zholents, “Billion Particle Linac Simulations for Future Light Sources”, in Proc. 24th Linear Accelerator Conf. (LINAC'08), Victoria, Canada, Sep.-Oct. 2008, paper FR105, pp. 1110-1113.
- X. Wu, Y. C. He, J. Liu, C. H. Wang, and J. C. Wang, “Design and Implementation of the Remote Control System of the Digital Magnet Power Supply of China Spallation Neutron Source”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPEA010, pp. 3167-3169.
- C. Adolphsen et al., “Pulse to Pulse Stability Issues in the SLC”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WAG11, pp. 646-648.
- G. Lanfranco et al., “Development of Ultra-High Quality Surface Finish Undulator Vacuum Chambers for the FERMI@Elettra Project”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPD023, pp. 3138-3140.
- F. Yan et al., “The investigation of cavity frequency instability induced by vibrations”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPA068, pp. 184-186.
Back to search