Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] P. Snopok, M. Berz, and C. Johnstone, “Calculating the Nonlinear Tune Shifts with Amplitude using Measured BPM Data”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMS009, pp. 3889-3891.
[n] D. Doelling et al., “Latest Progress in Insertion Devices at ACCEL Instruments”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC111, pp. 2261-2263.
[n] Y. Jung et al., “Heat Treatment for Jacketed Half-wave Resonator Cavity”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 482-484. doi:10.18429/JACoW-SRF2019-TUP031
[n] J. Flanz, S. Durlacher, M. Goitein, A. Smith, and S. Woods, “Invited Paper: The Northeast Proton Therapy Center at Massachusetts General Hospital”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper J-03, pp. 499-503.
[n] M. Boscolo et al., “SPARC Working Point Optimization for a Bunch with Gaussian Temporal Profile”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAP011, pp. 1248-1250.
[n] J. C. Jan, Y. L. Chu, C.-S. Hwang, and F. H. Tseng, “A Wiggler Magnet Design for the TPS”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4317-4320. doi:10.18429/JACoW-IPAC2018-THPMK013
[n] H. Chen, J. Gao, Q. X. Jin, R. K. Li, and Y. Z. Lin, “The Beam Characteristics of Intensity-modulated Radiotherapy 6MeV Standing Wave Accelerating Tube”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEA016, pp. 97-99.
[n] B. Beaudoin et al., “Novel High Power Sources for the Physics of Ionospheric Modification”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3398-3401. doi:10.18429/JACoW-IPAC2015-WEPTY056
[n] P. Emma et al., “Commissioning of the LCLS Linac and Bunch Compressors”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper FRAAU04, pp. 548-551.
[n] Y.-C. Liu, J. C. Huang, and F. H. Tseng, “Beam-Based Alignment Procedures for Small Gap in-Vacuum Undulators at the Taiwan Photon Source”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4342-4344. doi:10.18429/JACoW-IPAC2018-THPMK020
[n] I. J. Gillingham, M. G. Abbott, T. M. Cobb, and M. T. Heron, “Diverse Uses of Python at Diamond”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper TUP024, pp. 137-139.
[n] G. A. Krafft et al., “Electron-Beam Diagnostics for Jefferson Lab's High Power Free Electron Laser”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 3V045, pp. 912-914.
[n] M. Yoshimoto, H. Hotchi, S. Kato, M. Kinsho, K. Okabe, and K. Yamamoto, “Radio-Activation Caused by Secondary Particles Due to Nuclear Reactions at the Stripper Foil in the J-PARC RCS”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2300-2303. doi:10.18429/JACoW-IPAC2017-TUPVA093
[n] H. Geng et al., “Beam Distribution Transformation with SFMs at 3MeV C-ADS Beamline”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 824-826. doi:10.18429/JACoW-IPAC2014-MOPRI090
[n] S. Scheloske and J. M. Mosthaf, “Overview of the Personnel Safety System at the Heidelberg Ion Therapy Facility”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper TUP005, pp. 88-90.
[n] X. Shen, R. K. Li, X. J. Wang, S. P. Weathersby, and J. Yang, “Ultrafast Mega-electron-volt Gas-Phase Electron Diffraction at SLAC National Accelerator Laboratory”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 556-559. doi:10.18429/JACoW-IPAC2018-MOPML066
[n] A. Streun, M. Aiba, M. B?Âge, M. P. Ehrlichman, and A. Saa Hernandez, “Design Studies for an Upgrade of the SLS Storage Ring”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1724-1727. doi:10.18429/JACoW-IPAC2015-TUPJE047
[n] D. M. Kaplan, “Muon Cooling, Muon Colliders, and the MICE Experiment”, in Proc. COOL'13, Mürren, Switzerland, Jun. 2013, paper MOAM2HA01, pp. 11-15.
[n] C. J. Slominski and M. Bickley, “A MySQL Based EPICS Archiver”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP021, pp. 447-449.
[n] T. L. Larrieu, M. E. Joyce, and C. J. Slominski, “The CEBAF Element Database”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP261, pp. 594-596.
[n] J. M. Kim, K. M. Ha, H.-S. Kang, J. H. Kim, and E.-H. Lee, “Improvement of Web-Based Monitoring of EPICS-IOC for PAL Control System”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper WEPMA075, pp. 428-430.
[n] R. Kazimi, “An extraction scheme for future CEBAF FFA based energy upgrade”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1407-1410. doi:10.18429/JACoW-IPAC2025-TUPM114
[n] M. P. Laverty and K. Fong, “An Iterative Learning Feedforward Controller for the TRIUMF e-linac”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 485-487. doi:10.18429/JACoW-LINAC2016-TUPLR009
[n] M. Schillo et al., “Compact Superconducting 250 MeV Proton Cyclotron for the PSI PROSCAN Proton Therapy Project”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper P3-07, pp. XX-XX.
[n] ?û. Karsli, A. Aksoy, and O. Yavas, “A First Step to Turkish Accelerator Center (TAC): An Infrared Free Electron Laser (IR-FEL) Facility”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper MOPPH019, pp. 39-42.
[n] G. Cox, “A .NET Interface for Channel Access”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper TUP022, pp. 134-136.
[n] A. Aksoy, U. Lehnert, S. Ozkorucuklu, and O. Yavas, “Injector Design for Turkish Accelerator Center Free Electron Laser Facility”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6PFP001, pp. 3687-3689.
[n] S. Kato, H. Harada, H. Hotchi, M. Kinsho, and K. Yamamoto, “The Mitigation System of the Large Angle Foil Scattering Beam Loss caused by the Multi-turn Charge-exchange Injection”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 873-875. doi:10.18429/JACoW-IPAC2014-MOPRI107
[n] R. E. Laxdal et al., “Recent Progress in the Superconducting RF Program at TRIUMF/ISAC”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper MOP06, pp. 128-132.
[n] X. Yang et al., “Experimental Demonstration of Wideband Tunability of an Ultrafast Laser-Seeded Free-Electron Laser”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper TUPB23, pp. 302-305.
[n] L. Zhang et al., “An X-Band Linear Accelerator with Continuously-adjustable Beam Energy”, in Proc. SAP'14, Lanzhou, China, Aug. 2014, paper WEPH22, pp. 68-70.
[n] W. T. Weng, A. Chao, and J. Murray, “Analysis of Orbit Perturbations of the SLC Arcs”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1361-1364.
[n] S. Seletskiy, K. Mernick, L. Nguyen, P. Inacker, and R. Hulsart, “Feedbacks at Low Energy RHIC Electron Cooler”, presented at the IBIC'25, Liverpool, UK, Sep. 2025, paper TUPCO27, unpublished.
[n] CA. Timossi and H. Nishimura, “A .NET Assembly for EPICS Simple Channel Access”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper MOW02, pp. 34-36.
[n] T. Friedrich and M. T?Ârngren, “Surveying Software Technology for Accelerator Control Systems”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper MOY03, pp. 16-18.
[n] J. A. Vasquez, A. Andrighetto, G. P. Prete, and M. Bertocco, “New Control System for the SPES Off-line Laboratory at LNL-INFN using EPICS IOCs based on the Raspberry Pi”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC053, pp. 687-690.
[n] A. U. Luccio and F. Lin, “New Formalism in the Spin Tracking Code Spink”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPP097, pp. 1756-1758.
[n] T. Kamps et al., “Diagnostics Beamline for the SRF Gun Project”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper THPP033, pp. XX-XX.
[n] Y. Jiao, J. Wu, and Q. Qin, “Efficiency Enhancement in a Tapered Free Electron Laser by Varying the Electron Beam Radius”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPP084, pp. 1786-1788.
[n] J.-P. Jensen, B. Conrad, U. Schuetz, F.-R. Ullrich, and A. Wanning, “Hybrid Dry Coolers in Cooling Systems of High Energy Physics Accelerators”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT065, pp. 1996-1998.
[n] F. Tamura et al., “Development of the Beam Chopper Timing System for Multi-Turn Injection to the J-PARC RCS”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMN038, pp. 2125-2127.
[n] G. P. Lawrence, “Transmutation and Energy Production with High Power Accelerators”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FPD03, pp. 35-39.
[n] J. M. Byrd, P. Kuske, and C. Steier, “Energy Calibration of the Eectron Beam of the ALS using Resonant Depolarization”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP5B03, pp. 1566-1568.
[n] H. J. Kim, H. C. Jung, and W. K. Kim, “Progress on Superconducting Linac for the RAON Heavy Ion Accelerator”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3851-3853. doi:10.18429/JACoW-IPAC2015-THPF074
[n] G. P. Gallerano, A. Doria, E. Giovenale, G. Messina, I. P. Spassovsky, and C. R. Frascati, “Compact THz FELs and Their Potential in Biological Applications”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper TUPP032, pp. XX-XX.
[n] A. Chirkov, N. Doinikov, Yu. Severgin, and S. Sytchevsky, “Harmonic Analysis of Elongated Rectangular Aperture Magnets”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1250-1253.
[n] Y. Torun and A. Moretti, “Grid Window Tests on an 805-MHz Pillbox Cavity”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3393-3394. doi:10.18429/JACoW-IPAC2015-WEPTY054
[n] A. S. Gogolev, S. R. Uglov, and A. M. Taratin, “Method of State and Alignment Monitoring for Crystal Deflectors of Relativistic Ions”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper FRAOR02, pp. 200-202.
[n] C. R. Prior, “Muon Storage Rings for a Neutrino Factory”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6PFP099, pp. 2739-2741.
[n] K. Ammigan et al., “Examination of Beryllium under Intense High Energy Proton Beam at CERN's HiRadMat Facility”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3289-3292. doi:10.18429/JACoW-IPAC2015-WEPTY015
[n] K. Cerff, M. Hagelstein, W. Mexner, and T. Spangenberg, “A Modular Control System Based on ACS for Present and Future ANKA Insertion Devices”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper TUP003, pp. 82-84.
[n] M. G. Giacchini et al., “EPICS applications in the control of SPES Target Laboratory”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper WEPL020, pp. 67-69.
[n] A. Bertarelli et al., “First Results of an Experiment on Advanced Collimator Materials at CERN HiRadMat Facility”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPFI046, pp. 3391-3393.
For LaTeX
Use Complete Form
For BibTeX
References
- P. Snopok, M. Berz, and C. Johnstone, “Calculating the Nonlinear Tune Shifts with Amplitude using Measured BPM Data”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMS009, pp. 3889-3891.
- D. Doelling et al., “Latest Progress in Insertion Devices at ACCEL Instruments”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC111, pp. 2261-2263.
- Y. Jung et al., “Heat Treatment for Jacketed Half-wave Resonator Cavity”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 482-484.
- J. Flanz, S. Durlacher, M. Goitein, A. Smith, and S. Woods, “Invited Paper: The Northeast Proton Therapy Center at Massachusetts General Hospital”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper J-03, pp. 499-503.
- M. Boscolo et al., “SPARC Working Point Optimization for a Bunch with Gaussian Temporal Profile”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAP011, pp. 1248-1250.
- J. C. Jan, Y. L. Chu, C.-S. Hwang, and F. H. Tseng, “A Wiggler Magnet Design for the TPS”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4317-4320.
- H. Chen, J. Gao, Q. X. Jin, R. K. Li, and Y. Z. Lin, “The Beam Characteristics of Intensity-modulated Radiotherapy 6MeV Standing Wave Accelerating Tube”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEA016, pp. 97-99.
- B. Beaudoin et al., “Novel High Power Sources for the Physics of Ionospheric Modification”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3398-3401.
- P. Emma et al., “Commissioning of the LCLS Linac and Bunch Compressors”, in Proc. 30th Int. Free Electron Laser Conf. (FEL'08), Gyeongju, Korea, Aug. 2008, paper FRAAU04, pp. 548-551.
- Y.-C. Liu, J. C. Huang, and F. H. Tseng, “Beam-Based Alignment Procedures for Small Gap in-Vacuum Undulators at the Taiwan Photon Source”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4342-4344.
- I. J. Gillingham, M. G. Abbott, T. M. Cobb, and M. T. Heron, “Diverse Uses of Python at Diamond”, in Proc. 7th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'08), Ljbuljana, Slovenia, Oct. 2008, paper TUP024, pp. 137-139.
- G. A. Krafft et al., “Electron-Beam Diagnostics for Jefferson Lab's High Power Free Electron Laser”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 3V045, pp. 912-914.
- M. Yoshimoto, H. Hotchi, S. Kato, M. Kinsho, K. Okabe, and K. Yamamoto, “Radio-Activation Caused by Secondary Particles Due to Nuclear Reactions at the Stripper Foil in the J-PARC RCS”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2300-2303.
- H. Geng et al., “Beam Distribution Transformation with SFMs at 3MeV C-ADS Beamline”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 824-826.
- S. Scheloske and J. M. Mosthaf, “Overview of the Personnel Safety System at the Heidelberg Ion Therapy Facility”, in Proc. 7th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'08), Ljbuljana, Slovenia, Oct. 2008, paper TUP005, pp. 88-90.
- X. Shen, R. K. Li, X. J. Wang, S. P. Weathersby, and J. Yang, “Ultrafast Mega-electron-volt Gas-Phase Electron Diffraction at SLAC National Accelerator Laboratory”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 556-559.
- A. Streun, M. Aiba, M. B?Âge, M. P. Ehrlichman, and A. Saa Hernandez, “Design Studies for an Upgrade of the SLS Storage Ring”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1724-1727.
- D. M. Kaplan, “Muon Cooling, Muon Colliders, and the MICE Experiment”, in Proc. 9th Workshop on Beam Cooling and Related Topics (COOL'13), Mürren, Switzerland, Jun. 2013, paper MOAM2HA01, pp. 11-15.
- C. J. Slominski and M. Bickley, “A MySQL Based EPICS Archiver”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEP021, pp. 447-449.
- T. L. Larrieu, M. E. Joyce, and C. J. Slominski, “The CEBAF Element Database”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP261, pp. 594-596.
- J. M. Kim, K. M. Ha, H.-S. Kang, J. H. Kim, and E.-H. Lee, “Improvement of Web-Based Monitoring of EPICS-IOC for PAL Control System”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper WEPMA075, pp. 428-430.
- R. Kazimi, “An extraction scheme for future CEBAF FFA based energy upgrade”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPM114, pp. 1407-1410.
- M. P. Laverty and K. Fong, “An Iterative Learning Feedforward Controller for the TRIUMF e-linac”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 485-487.
- M. Schillo et al., “Compact Superconducting 250 MeV Proton Cyclotron for the PSI PROSCAN Proton Therapy Project”, in Proc. 16th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'01), East Lansing, MI, USA, May 2001, paper P3-07, pp. XX-XX.
- ?û. Karsli, A. Aksoy, and O. Yavas, “A First Step to Turkish Accelerator Center (TAC): An Infrared Free Electron Laser (IR-FEL) Facility”, in Proc. 30th Int. Free Electron Laser Conf. (FEL'08), Gyeongju, Korea, Aug. 2008, paper MOPPH019, pp. 39-42.
- G. Cox, “A .NET Interface for Channel Access”, in Proc. 7th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'08), Ljbuljana, Slovenia, Oct. 2008, paper TUP022, pp. 134-136.
- A. Aksoy, U. Lehnert, S. Ozkorucuklu, and O. Yavas, “Injector Design for Turkish Accelerator Center Free Electron Laser Facility”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6PFP001, pp. 3687-3689.
- S. Kato, H. Harada, H. Hotchi, M. Kinsho, and K. Yamamoto, “The Mitigation System of the Large Angle Foil Scattering Beam Loss caused by the Multi-turn Charge-exchange Injection”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 873-875.
- R. E. Laxdal et al., “Recent Progress in the Superconducting RF Program at TRIUMF/ISAC”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper MOP06, pp. 128-132.
- X. Yang et al., “Experimental Demonstration of Wideband Tunability of an Ultrafast Laser-Seeded Free-Electron Laser”, in Proc. 32nd Int. Free Electron Laser Conf. (FEL'10), Malmö, Sweden, Aug. 2010, paper TUPB23, pp. 302-305.
- L. Zhang et al., “An X-Band Linear Accelerator with Continuously-adjustable Beam Energy”, in Proc. 12th Symposium on Accelerator Physics (SAP'14), Lanzhou, China, Aug. 2014, paper WEPH22, pp. 68-70.
- W. T. Weng, A. Chao, and J. Murray, “Analysis of Orbit Perturbations of the SLC Arcs”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1361-1364.
- S. Seletskiy, K. Mernick, L. Nguyen, P. Inacker, and R. Hulsart, “Feedbacks at Low Energy RHIC Electron Cooler”, presented at the 14th International Beam Instrumentation Conference (IBIC'25), Liverpool, UK, Sep. 2025, paper TUPCO27, unpublished.
- CA. Timossi and H. Nishimura, “A .NET Assembly for EPICS Simple Channel Access”, in Proc. 7th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'08), Ljbuljana, Slovenia, Oct. 2008, paper MOW02, pp. 34-36.
- T. Friedrich and M. T?Ârngren, “Surveying Software Technology for Accelerator Control Systems”, in Proc. 7th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'08), Ljbuljana, Slovenia, Oct. 2008, paper MOY03, pp. 16-18.
- J. A. Vasquez, A. Andrighetto, G. P. Prete, and M. Bertocco, “New Control System for the SPES Off-line Laboratory at LNL-INFN using EPICS IOCs based on the Raspberry Pi”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC053, pp. 687-690.
- A. U. Luccio and F. Lin, “New Formalism in the Spin Tracking Code Spink”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPP097, pp. 1756-1758.
- T. Kamps et al., “Diagnostics Beamline for the SRF Gun Project”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper THPP033, pp. XX-XX.
- Y. Jiao, J. Wu, and Q. Qin, “Efficiency Enhancement in a Tapered Free Electron Laser by Varying the Electron Beam Radius”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPP084, pp. 1786-1788.
- J.-P. Jensen, B. Conrad, U. Schuetz, F.-R. Ullrich, and A. Wanning, “Hybrid Dry Coolers in Cooling Systems of High Energy Physics Accelerators”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPLT065, pp. 1996-1998.
- F. Tamura et al., “Development of the Beam Chopper Timing System for Multi-Turn Injection to the J-PARC RCS”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMN038, pp. 2125-2127.
- G. P. Lawrence, “Transmutation and Energy Production with High Power Accelerators”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper FPD03, pp. 35-39.
- J. M. Byrd, P. Kuske, and C. Steier, “Energy Calibration of the Eectron Beam of the ALS using Resonant Depolarization”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP5B03, pp. 1566-1568.
- H. J. Kim, H. C. Jung, and W. K. Kim, “Progress on Superconducting Linac for the RAON Heavy Ion Accelerator”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3851-3853.
- G. P. Gallerano, A. Doria, E. Giovenale, G. Messina, I. P. Spassovsky, and C. R. Frascati, “Compact THz FELs and Their Potential in Biological Applications”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper TUPP032, pp. XX-XX.
- A. Chirkov, N. Doinikov, Yu. Severgin, and S. Sytchevsky, “Harmonic Analysis of Elongated Rectangular Aperture Magnets”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1250-1253.
- Y. Torun and A. Moretti, “Grid Window Tests on an 805-MHz Pillbox Cavity”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3393-3394.
- A. S. Gogolev, S. R. Uglov, and A. M. Taratin, “Method of State and Alignment Monitoring for Crystal Deflectors of Relativistic Ions”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper FRAOR02, pp. 200-202.
- C. R. Prior, “Muon Storage Rings for a Neutrino Factory”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6PFP099, pp. 2739-2741.
- K. Ammigan et al., “Examination of Beryllium under Intense High Energy Proton Beam at CERN's HiRadMat Facility”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3289-3292.
- K. Cerff, M. Hagelstein, W. Mexner, and T. Spangenberg, “A Modular Control System Based on ACS for Present and Future ANKA Insertion Devices”, in Proc. 7th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'08), Ljbuljana, Slovenia, Oct. 2008, paper TUP003, pp. 82-84.
- M. G. Giacchini et al., “EPICS applications in the control of SPES Target Laboratory”, in Proc. 8th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'10), Saskatoon, Canada, Oct. 2010, paper WEPL020, pp. 67-69.
- A. Bertarelli et al., “First Results of an Experiment on Advanced Collimator Materials at CERN HiRadMat Facility”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPFI046, pp. 3391-3393.
Back to search