Warning
Some papers titles are all uppercase, you must correct this before using this reference.
Favourites
For Word
[n] J. Upadhyay et al., “Experiment and Results on Plasma Etching of SRF Cavities”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3581-3583. doi:10.18429/JACoW-IPAC2015-WEPWI040
[n] X. Yang, X. Huang, and J. A. Safranek, “LOCO Application to NSLS2 SR Dispersion and Beta Beating Correction”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1989-1992. doi:10.18429/JACoW-IPAC2015-TUPHA012
[n] R. Zeng and A. J. Johansson, “Design Considerations for Phase Reference Distribution System at ESS”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPFI042, pp. 3379-3381.
[n] S. W. Lee, M. S. Champion, and Y. W. Kang, “Study of Pretuning and High Power Test of DTL Iris Waveguide Couplers Using a Single Cell Cavity”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 522-524. doi:10.18429/JACoW-IPAC2016-MOPMY005
[n] T. Lamb et al., “Characterization of the Engineered Photodiode-based Fiber Link Stabilization Scheme for Optical Synchronization Systems”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPD049, pp. 2627-2629.
[n] L. B. Jones et al., “Gallium Arsenide Photocathode Research at Daresbury Laboratory”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC129, pp. 3185-3187.
[n] A. S. Setty et al., “A New Buncher for the ESRF Linac Injector”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 389-391. doi:10.18429/JACoW-IPAC2016-MOPMW001
[n] A. E. Wheelhouse et al., “The Commissioning of the EBTF S-band Photoinjector Gun at Daresbury Laboratory”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPFI065, pp. 2845-2847.
[n] J. K. Jones, K. D. Dumbell, A. J. Moss, and E. W. Snedden, “Model Independent Analysis of Beam Jitter on VELA”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1806-1809. doi:10.18429/JACoW-IPAC2016-TUPOW027
[n] Y. T. Ding, P. Baxevanis, Y. Cai, Z. Huang, and R. D. Ruth, “High-gain X-ray FELs using a Transverse Gradient Undulator in an Ultimate Storage Ring”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWA075, pp. 2286-2288.
[n] I. Chaikovska, C. Bruni, S. Chanc?®, A. R. Gamelin, H. Monard, and A. Loulergue, “Status of the Preparation to the Commissioning of the ThomX Storage Ring”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 833-836. doi:10.18429/JACoW-IPAC2016-MOPOW052
[n] H. Niewiadomski, H. Burkhardt, and F. J. Nemes, “LHC Optics Determination with Proton Tracks Measured in the Roman Pots Detectors of the TOTEM Experiment”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPC008, pp. 136-138.
[n] H. J. Burckhart et al., “Some Ideas Towards Energy Optimization at CERN”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPFI050, pp. 3400-3402.
[n] Y. C. Jing, Y. Hao, and V. Litvinenko, “Bunch Compressor Design for Potential FEL Operation at eRHIC”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPP088, pp. 1795-1797.
[n] P. Hopchev et al., “A Beam Gas Vertex Detector for Beam Size Measurement in the LHC”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3680-3683. doi:10.18429/JACoW-IPAC2014-THPME175
[n] L. Liu, L. Kang, X. J. Nie, and H. Qu, “STUDY ON STRUCTURE AND THERMAL ANALYSIS OF CSNS R BEAM DUMP”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPFI027, pp. 3356-3357.
For LaTeX
Use Complete Form
For BibTeX
References
- J. Upadhyay et al., “Experiment and Results on Plasma Etching of SRF Cavities”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3581-3583.
- X. Yang, X. Huang, and J. A. Safranek, “LOCO Application to NSLS2 SR Dispersion and Beta Beating Correction”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1989-1992.
- R. Zeng and A. J. Johansson, “Design Considerations for Phase Reference Distribution System at ESS”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPFI042, pp. 3379-3381.
- S. W. Lee, M. S. Champion, and Y. W. Kang, “Study of Pretuning and High Power Test of DTL Iris Waveguide Couplers Using a Single Cell Cavity”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 522-524.
- T. Lamb et al., “Characterization of the Engineered Photodiode-based Fiber Link Stabilization Scheme for Optical Synchronization Systems”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPD049, pp. 2627-2629.
- L. B. Jones et al., “Gallium Arsenide Photocathode Research at Daresbury Laboratory”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPC129, pp. 3185-3187.
- A. S. Setty et al., “A New Buncher for the ESRF Linac Injector”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 389-391.
- A. E. Wheelhouse et al., “The Commissioning of the EBTF S-band Photoinjector Gun at Daresbury Laboratory”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPFI065, pp. 2845-2847.
- J. K. Jones, K. D. Dumbell, A. J. Moss, and E. W. Snedden, “Model Independent Analysis of Beam Jitter on VELA”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1806-1809.
- Y. T. Ding, P. Baxevanis, Y. Cai, Z. Huang, and R. D. Ruth, “High-gain X-ray FELs using a Transverse Gradient Undulator in an Ultimate Storage Ring”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPWA075, pp. 2286-2288.
- I. Chaikovska, C. Bruni, S. Chanc?®, A. R. Gamelin, H. Monard, and A. Loulergue, “Status of the Preparation to the Commissioning of the ThomX Storage Ring”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 833-836.
- H. Niewiadomski, H. Burkhardt, and F. J. Nemes, “LHC Optics Determination with Proton Tracks Measured in the Roman Pots Detectors of the TOTEM Experiment”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPC008, pp. 136-138.
- H. J. Burckhart et al., “Some Ideas Towards Energy Optimization at CERN”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPFI050, pp. 3400-3402.
- Y. C. Jing, Y. Hao, and V. Litvinenko, “Bunch Compressor Design for Potential FEL Operation at eRHIC”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPP088, pp. 1795-1797.
- P. Hopchev et al., “A Beam Gas Vertex Detector for Beam Size Measurement in the LHC”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3680-3683.
- L. Liu, L. Kang, X. J. Nie, and H. Qu, “STUDY ON STRUCTURE AND THERMAL ANALYSIS OF CSNS R BEAM DUMP”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPFI027, pp. 3356-3357.
Back to search