Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] H. Wei and C. Chen, “Control of Chaotic Particle Motion Using Adiabatic Thermal Beams”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP072, pp. 1609-1611.
[n] C. Arcambal et al., “Conditioning of the First Mass Production Power Couplers for the ESS Elliptical Cavities”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 288-292. doi:10.18429/JACoW-SRF2019-MOP086
[n] D. J. Kelliher and S. Machida, “Orbit Distortion and its Correction in a Non-scaling FFAG”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP005, pp. 3383-3385.
[n] B. Franczak, K. Blasche, and K. H. Reich, “A Variable Transition Energy Lattice for SIS 12/18”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2120-2123.
[n] H. Wang et al., “Use of an Injection Locked Magnetron to Drive a Superconducting RF Cavity”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEB067, pp. 4026-4028.
[n] I. Sugai et al., “Performance Characteristics of HBC-foils by 650 KeV H- and DC High Intensity Ion Beam Irradiation”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPS037, pp. 3502-3504.
[n] W. O. Brunk, C. A. Harris, and D. B. Robbins, “Designs, Parameters and Problems in the Associated Cooled Equipment of a High Purity Low Conductivity Water System Rated at 7,500 GPM and 25.5 Megawatts”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 887-890.
[n] P. K. Ambattu et al., “Wakefield Damping for the CLIC Crab Cavity”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP006, pp. 815-817.
[n] J. N. Bai, S. Xiao, T. G. Xu, and L. Zeng, “The Development of Timing Control System for RFQ”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper SUPB037, pp. 89-91.
[n] L. I. Malysheva et al., “The Luminosity for the ILC Travelling Focus Regime with Offsets and Angle Scans”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC004, pp. 991-993.
[n] K. Fukushima, S. M. Lund, and C. Y. Wong, “Multispecies Simulation of the FRIB Frontend Near the ECR Sources with the Warp Code”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 434-437. doi:10.18429/JACoW-LINAC2016-TUPRC010
[n] L. Monaco et al., “In-vacuum Temperature Measurement of Niobium Components using Infrared Pyrometry during Electron Beam Welding Procedure”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWO011, pp. 2334-2336.
[n] S. N. Andrianov, “Some Problems of Optimization Procedure for Beam Lines”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP02J, pp. 1153-1155.
[n] N. A. Ebrahim, “Electron Acceleration by Relativistic Electron Plasma Waves in the Laser Plasma Beatwave Accelerator Concept”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TH-40, pp. 792-794.
[n] U. Bigliani, G. Nassibian, K. H. Reich, and D. Zanaschi, “The RF Accelerating System for the CERN PS Booster”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 233-237.
[n] S. Igarashi et al., “Beam Profile Measurement using Flying Wire Monitors at the J-PARC Main Ring”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC098, pp. 1239-1241.
[n] Y. S. Wong, K.-B. Liu, J. F. Chen, W. C. Hsu, W. C. Hung, and P. H. Tseng, “Design of a Three Legs and Phase Shift AC to DC Converter for Taiwan Photon Light Source”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 511-513. doi:10.18429/JACoW-IPAC2014-MOPME061
[n] E. N. Shaposhnikova, T. Argyropoulos, T. Bohl, J. Esteban Muller, and H. Timko, “Longitudinal Instabilities in the SPS and Beam Dynamics Issues with High Harmonic RF Systems”, in Proc. HB'12, Beijing, China, Sep. 2012, paper WEO1A04, pp. 358-362.
[n] C. Xiao, L. Groening, O. K. Kester, and M. T. Maier, “Decoupling Capabilities Study of the Emittance Transfer Section”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWO009, pp. 1895-1897.
[n] P. K. Saha et al., “Measurement of the Stripping Efficiency for HBC Stripper Foil in the 3-GeV RCS of J-PARC”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPS040, pp. 3511-3513.
[n] E. R. Harms et al., “Commissioning and First Results from the Fermilab Cryomodule Test Stand”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 185-188. doi:10.18429/JACoW-LINAC2016-MOPLR022
[n] M. Droba et al., “Simulation Studies on Beam Injection into a Figure-8 Type Storage Ring”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1126-1128. doi:10.18429/JACoW-IPAC2014-TUPRO045
[n] M. T. Lynch, D. Keffeler, D. Rees, W. Roybal, and J. Sheikh, “Installation and Test Results of a High-Power, CW Klystrode Amplifier at Los Alamos National Laboratory”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TU-37, pp. 451-453.
[n] P. Musumeci, J. Moody, J. B. Rosenzweig, and C. M. Scoby, “Experimental Generation and Characterization of Uniformly Filled Ellipsoidal Electron Beam Distributions”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP075, pp. 724-726.
[n] V. P. Belov, A. A. Kapustin, M. G. Nagajenko, P. Severgin, and I. A. Shukeilo, “Storage of High-Intensity Proton Bunches in Moscow Meson Facility Isochronous Magnetic Ring”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 873-876.
[n] K. Okabe et al., “H- Injection Studies of FFAG Accelerator at KURRI”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPS074, pp. 2676-2678.
[n] P. A. McIntosh, “A Proposed New HOM Monitoring System on the SRS”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8P051, pp. 2223-2225.
[n] F. He, K. X. Liu, Z. Ni, D. Xie, and Q. Feng, “1010mm2 MgB2 Film Fabricated by HPCVD as a Candidate Material for SRF Cavit”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWO028, pp. 2375-2377.
[n] V. B. Graves et al., “Systems Testing of a Free Hg Jet System for Use in a High-Power Target Experiment”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMS068, pp. 3136-3138.
[n] R. Geng et al., “Experimental Studies of Electron Multipacting in CESR Type Rectangular Waveguide Couplers”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPDO006, pp. 2238-2240.
[n] M. A. Chaudhri, “The Potential and Application of Cyclotrons in Biomedical Fields”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper F-10, pp. 447-456.
[n] J. A. Martin et al., “Invited Paper: Operational Experience for Coupled Operation of the Holifield Tandem Electrostatic Accelerator and Isochronous Cyclotron”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper B-03, pp. 38-45.
[n] C. Feng, D. Wang, and Z. T. Zhao, “Study of the Energy Chirp Effects on Seeded FEL Schemes at SDUV-FEL”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPP056, pp. 1724-1726.
[n] A. Brinkmann, J. I. Iversen, D. Reschke, and J. Ziegler, “Dry-ice Cleaning on SRF Cavities”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH154, pp. 418-420.
[n] G. Solomon, D. Riffelmacher, R. Snyder, M. Tracy, and T. A. Treado, “The VSL3616, CPI's 1.3 GHz, 700 Watt CW, GaN Solid State Power Amplifier”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2302-2304. doi:10.18429/JACoW-IPAC2014-WEPME022
[n] F. Bakkali Taheri, J. Cowley, G. Doucas, S. M. Hooker, I. V. Konoplev, and R. Bartolini, “A Novel Approach in the One-Dimensional Phase Retrieval Problem and its Application to the Time Profile Reconstruction”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 955-957. doi:10.18429/JACoW-IPAC2016-MOPOY048
[n] N. A. Ebrahim, “Review of Current Research in Laser and Plasma-Based Acceleration”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper FR1-01, pp. 825-829.
[n] Yu. Senichev, A. Bogdanov, A. Lehrach, R. Maier, R. T?Âlle, and E. Zaplatin, “Some Features of Beam Dynamics in Superconducting Linac Based on Quarter- and Half-wave Cavities”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPLE107, pp. 1293-1295.
[n] C. Mitsuda et al., “Suppression of Horizontal Beam Oscillation by using Fast Kicker Magnet System in SPring-8 Storage Ring”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEA031, pp. 2552-2554.
[n] K. S. White and K.-U. Kasemir, “Alarms Philosophy”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP022, pp. XX-XX.
[n] J. F. Wagner et al., “Status of Injection Studies into the Figure-8 Storage Ring”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 187-189. doi:10.18429/JACoW-IPAC2015-MOPWA036
[n] I. V. Gonin et al., “Development of 5-Cell =0.9 650 MHz Elliptical Cavities for Project X”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP052, pp. 171-173.
[n] H. Liebermann, H. Podlech, and U. Ratzinger, “Peak Field Optimization for the Superconducting CH Structure”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH153, pp. 415-417.
[n] O. Kugeler, W. Anders, J. Knobloch, and A. Neumann, “CW Adaptation of TESLA Technology in HoBiCaT”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEC004, pp. 2893-2895.
[n] K. Endo, H. Fukuma, and F. Q. Zhang, “Preliminary Orbit Measurement for Beam Based Alignment”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP049L, pp. 1657-1659.
[n] A. Chao, “SLIM - An Early Work Revisited”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPPGM04, pp. 2963-2967.
[n] V. Miltchev, D. Riebesehl, J. Rossbach, M. Trunk, and O. Stein, “SALOME: An Accelerator for the Practical Course in Accelerator Physics”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2235-2237. doi:10.18429/JACoW-IPAC2014-WEPRO114
[n] H.-S. Kang and J. H. Hong, “A Beam Test of Corrugated Structure for Passive Linearizer”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper TUP093, pp. 593-595.
[n] J. W. Kovermann, S. Calatroni, A. Descoeudres, T. Lefevre, and W. Wuensch, “Advanced Experimental Techniques for RF and DC Breakdown Research”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP095, pp. 775-777.
[n] D. Amorim, J.-M. De Conto, and Y. G??mez Mart?¡nez, “Design of an RF Device to Study the Multipactor Phenomenon”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 507-509. doi:10.18429/JACoW-IPAC2016-MOPMW044
[n] W. Y. Yang, M. Yoon, S. Oh, J. S. Chai, and J. H. Ha, “Magnetic Field Calculation for a 13 MeV PET Cyclotron”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP5, pp. 2265-2267.
[n] Z. Y. Guo et al., “Experiment to Measure the Electron Cloud at BEPC”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FOAB003, pp. 676-678.
[n] M. Cavenago, G. Bettega, F. Cavaliere, R. Pozzoli, and M. Rome, “Electron Traps and Advanced Turbulence Diagnostic”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC087, pp. 3191-3193.
[n] S. J. Song, M. J. Park, and K. H. Chung, “Development of Portable DC Electron Accelerator with Air-Core Transformer”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 6D060, pp. 822-824.
[n] S. T. Artikova, R. B. Fiorito, A. G. Shkvarunets, C. P. Welsch, and H. D. Zhang, “Beam Halo Studies for CTF3”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEB075, pp. 2872-2874.
[n] J. Yan, T. L. Allison, and S. D. Witherspoon, “PC/104 Asyn Drivers at Jefferson Lab”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMN012, pp. 898-900.
[n] F. Schillaci, “On the commissioning of the ELIMAIA plasma accelerator and the future medical application using the ELIMED beamline”, presented at the IPAC'23, Venice, Italy, May 2023, paper WEODA2, unpublished.
[n] D. Abler, C. Carli, A. Garonna, and K. J. Peach, “Study of Beam Transport Lines for a Biomedical Research Facility at CERN based on LEIR”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 836-838. doi:10.18429/JACoW-IPAC2014-MOPRI095
[n] Y. C. Zhang, S. P. Li, H. H. Lu, S. C. Sun, and Y. F. Yang, “Preliminary Design of Cooling System for a PrFeB-based Cryogenic Permanent Magnet Undulator Prototype at IHEP”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2743-2745. doi:10.18429/JACoW-IPAC2014-WEPRI105
[n] Z. T. Zhao, “Shanghai Soft X-Ray Free Electron Laser Test Facility”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC053, pp. 3011-3013.
[n] M. G. Zeitlin and A. N. Fedorova, “Nonlinear Dynamics of High-Brightness Beams”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPAH070, pp. 3006-3008.
[n] S.-C. Kim et al., “Low Current Bipolar Magnet Power Supply System at the PLS-II Storage Ring”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPD054, pp. 3635-3637.
[n] W. Radloff, “The Intensity Monitor Device for PETRA”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3370-3373.
[n] R. Rybaniec et al., “Real-time Estimation of Superconducting Cavities Parameters”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2456-2458. doi:10.18429/JACoW-IPAC2014-WEPME075
[n] N. Thompson and C. Hill, “High gradient hybrid halbach quadrupoles with a novel 3-Bit gradient tuning system”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3621-3623. doi:10.18429/JACoW-IPAC2023-WEPM031
[n] D. J. Scott et al., “Design Considerations for a Helical Undulator for the Production of Polarised Positrons for TESLA”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPKF064, pp. 458-460.
[n] M. Jaussi et al., “A Digital System for Longitudinal Emittance Blow-Up in the LHC”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPKS024, pp. 215-218.
[n] S.-C. Kim et al., “High Current Unipolar Magnet Power Supply System at the PLS-II Storage Ring”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPD055, pp. 3638-3640.
[n] H. Timko et al., “Longitudinal Beam Loss Studies of the CERN PS-to-SPS Transfer”, in Proc. HB'12, Beijing, China, Sep. 2012, paper WEO1C03, pp. 439-443.
[n] S. Stevenson, “A simulation of the Fermilab Main Injector dual power amplifier cavities”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 698-701. doi:10.18429/JACoW-NAPAC2025-WEP007
[n] K. Saito et al., “Superconducting RF Development for FRIB at MSU”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper THIOA02, pp. 790-794.
[n] D. Okamoto, Y. Honda, T. Sanuki, and T. Tauchi, “First Beam Test of the Tilt Monitor in the ATF2 Beam Line”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEOCMH01, pp. 2402-2404.
[n] Y. Li, J. V. Conway, X. Liu, and M. A. Palmer, “Electron Cloud Diagnostic Chambers with Various EC-suppression Coatings”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPFI088, pp. 3496-3498.
[n] H. Okuno et al., “Recent Achievements and Upgrade Programs at RIKEN Radioactive Isotope Beam Factory”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPD029, pp. 430-432.
For LaTeX
Use Complete Form
For BibTeX
References
- H. Wei and C. Chen, “Control of Chaotic Particle Motion Using Adiabatic Thermal Beams”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP072, pp. 1609-1611.
- C. Arcambal et al., “Conditioning of the First Mass Production Power Couplers for the ESS Elliptical Cavities”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 288-292.
- D. J. Kelliher and S. Machida, “Orbit Distortion and its Correction in a Non-scaling FFAG”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPP005, pp. 3383-3385.
- B. Franczak, K. Blasche, and K. H. Reich, “A Variable Transition Energy Lattice for SIS 12/18”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2120-2123.
- H. Wang et al., “Use of an Injection Locked Magnetron to Drive a Superconducting RF Cavity”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEB067, pp. 4026-4028.
- I. Sugai et al., “Performance Characteristics of HBC-foils by 650 KeV H- and DC High Intensity Ion Beam Irradiation”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPS037, pp. 3502-3504.
- W. O. Brunk, C. A. Harris, and D. B. Robbins, “Designs, Parameters and Problems in the Associated Cooled Equipment of a High Purity Low Conductivity Water System Rated at 7,500 GPM and 25.5 Megawatts”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 887-890.
- P. K. Ambattu et al., “Wakefield Damping for the CLIC Crab Cavity”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5PFP006, pp. 815-817.
- J. N. Bai, S. Xiao, T. G. Xu, and L. Zeng, “The Development of Timing Control System for RFQ”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper SUPB037, pp. 89-91.
- L. I. Malysheva et al., “The Luminosity for the ILC Travelling Focus Regime with Offsets and Angle Scans”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC004, pp. 991-993.
- K. Fukushima, S. M. Lund, and C. Y. Wong, “Multispecies Simulation of the FRIB Frontend Near the ECR Sources with the Warp Code”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 434-437.
- L. Monaco et al., “In-vacuum Temperature Measurement of Niobium Components using Infrared Pyrometry during Electron Beam Welding Procedure”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPWO011, pp. 2334-2336.
- S. N. Andrianov, “Some Problems of Optimization Procedure for Beam Lines”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THP02J, pp. 1153-1155.
- N. A. Ebrahim, “Electron Acceleration by Relativistic Electron Plasma Waves in the Laser Plasma Beatwave Accelerator Concept”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TH-40, pp. 792-794.
- U. Bigliani, G. Nassibian, K. H. Reich, and D. Zanaschi, “The RF Accelerating System for the CERN PS Booster”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 233-237.
- S. Igarashi et al., “Beam Profile Measurement using Flying Wire Monitors at the J-PARC Main Ring”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC098, pp. 1239-1241.
- Y. S. Wong, K.-B. Liu, J. F. Chen, W. C. Hsu, W. C. Hung, and P. H. Tseng, “Design of a Three Legs and Phase Shift AC to DC Converter for Taiwan Photon Light Source”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 511-513.
- E. N. Shaposhnikova, T. Argyropoulos, T. Bohl, J. Esteban Muller, and H. Timko, “Longitudinal Instabilities in the SPS and Beam Dynamics Issues with High Harmonic RF Systems”, in Proc. 52nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'12), Beijing, China, Sep. 2012, paper WEO1A04, pp. 358-362.
- C. Xiao, L. Groening, O. K. Kester, and M. T. Maier, “Decoupling Capabilities Study of the Emittance Transfer Section”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPWO009, pp. 1895-1897.
- P. K. Saha et al., “Measurement of the Stripping Efficiency for HBC Stripper Foil in the 3-GeV RCS of J-PARC”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPS040, pp. 3511-3513.
- E. R. Harms et al., “Commissioning and First Results from the Fermilab Cryomodule Test Stand”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 185-188.
- M. Droba et al., “Simulation Studies on Beam Injection into a Figure-8 Type Storage Ring”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1126-1128.
- M. T. Lynch, D. Keffeler, D. Rees, W. Roybal, and J. Sheikh, “Installation and Test Results of a High-Power, CW Klystrode Amplifier at Los Alamos National Laboratory”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TU-37, pp. 451-453.
- P. Musumeci, J. Moody, J. B. Rosenzweig, and C. M. Scoby, “Experimental Generation and Characterization of Uniformly Filled Ellipsoidal Electron Beam Distributions”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP075, pp. 724-726.
- V. P. Belov, A. A. Kapustin, M. G. Nagajenko, P. Severgin, and I. A. Shukeilo, “Storage of High-Intensity Proton Bunches in Moscow Meson Facility Isochronous Magnetic Ring”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 873-876.
- K. Okabe et al., “H- Injection Studies of FFAG Accelerator at KURRI”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPS074, pp. 2676-2678.
- P. A. McIntosh, “A Proposed New HOM Monitoring System on the SRS”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 8P051, pp. 2223-2225.
- F. He, K. X. Liu, Z. Ni, D. Xie, and Q. Feng, “1010mm2 MgB2 Film Fabricated by HPCVD as a Candidate Material for SRF Cavit”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPWO028, pp. 2375-2377.
- V. B. Graves et al., “Systems Testing of a Free Hg Jet System for Use in a High-Power Target Experiment”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMS068, pp. 3136-3138.
- R. Geng et al., “Experimental Studies of Electron Multipacting in CESR Type Rectangular Waveguide Couplers”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPDO006, pp. 2238-2240.
- M. A. Chaudhri, “The Potential and Application of Cyclotrons in Biomedical Fields”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper F-10, pp. 447-456.
- J. A. Martin et al., “Invited Paper: Operational Experience for Coupled Operation of the Holifield Tandem Electrostatic Accelerator and Isochronous Cyclotron”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper B-03, pp. 38-45.
- C. Feng, D. Wang, and Z. T. Zhao, “Study of the Energy Chirp Effects on Seeded FEL Schemes at SDUV-FEL”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPP056, pp. 1724-1726.
- A. Brinkmann, J. I. Iversen, D. Reschke, and J. Ziegler, “Dry-ice Cleaning on SRF Cavities”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH154, pp. 418-420.
- G. Solomon, D. Riffelmacher, R. Snyder, M. Tracy, and T. A. Treado, “The VSL3616, CPI's 1.3 GHz, 700 Watt CW, GaN Solid State Power Amplifier”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2302-2304.
- F. Bakkali Taheri, J. Cowley, G. Doucas, S. M. Hooker, I. V. Konoplev, and R. Bartolini, “A Novel Approach in the One-Dimensional Phase Retrieval Problem and its Application to the Time Profile Reconstruction”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 955-957.
- N. A. Ebrahim, “Review of Current Research in Laser and Plasma-Based Acceleration”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper FR1-01, pp. 825-829.
- Yu. Senichev, A. Bogdanov, A. Lehrach, R. Maier, R. T?Âlle, and E. Zaplatin, “Some Features of Beam Dynamics in Superconducting Linac Based on Quarter- and Half-wave Cavities”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPLE107, pp. 1293-1295.
- C. Mitsuda et al., “Suppression of Horizontal Beam Oscillation by using Fast Kicker Magnet System in SPring-8 Storage Ring”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEA031, pp. 2552-2554.
- K. S. White and K.-U. Kasemir, “Alarms Philosophy”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper TUP022, pp. XX-XX.
- J. F. Wagner et al., “Status of Injection Studies into the Figure-8 Storage Ring”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 187-189.
- I. V. Gonin et al., “Development of 5-Cell =0.9 650 MHz Elliptical Cavities for Project X”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP052, pp. 171-173.
- H. Liebermann, H. Podlech, and U. Ratzinger, “Peak Field Optimization for the Superconducting CH Structure”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH153, pp. 415-417.
- O. Kugeler, W. Anders, J. Knobloch, and A. Neumann, “CW Adaptation of TESLA Technology in HoBiCaT”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEC004, pp. 2893-2895.
- K. Endo, H. Fukuma, and F. Q. Zhang, “Preliminary Orbit Measurement for Beam Based Alignment”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP049L, pp. 1657-1659.
- A. Chao, “SLIM - An Early Work Revisited”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPPGM04, pp. 2963-2967.
- V. Miltchev, D. Riebesehl, J. Rossbach, M. Trunk, and O. Stein, “SALOME: An Accelerator for the Practical Course in Accelerator Physics”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2235-2237.
- H.-S. Kang and J. H. Hong, “A Beam Test of Corrugated Structure for Passive Linearizer”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper TUP093, pp. 593-595.
- J. W. Kovermann, S. Calatroni, A. Descoeudres, T. Lefevre, and W. Wuensch, “Advanced Experimental Techniques for RF and DC Breakdown Research”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP095, pp. 775-777.
- D. Amorim, J.-M. De Conto, and Y. G??mez Mart?¡nez, “Design of an RF Device to Study the Multipactor Phenomenon”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 507-509.
- W. Y. Yang, M. Yoon, S. Oh, J. S. Chai, and J. H. Ha, “Magnetic Field Calculation for a 13 MeV PET Cyclotron”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEP5, pp. 2265-2267.
- Z. Y. Guo et al., “Experiment to Measure the Electron Cloud at BEPC”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FOAB003, pp. 676-678.
- M. Cavenago, G. Bettega, F. Cavaliere, R. Pozzoli, and M. Rome, “Electron Traps and Advanced Turbulence Diagnostic”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPC087, pp. 3191-3193.
- S. J. Song, M. J. Park, and K. H. Chung, “Development of Portable DC Electron Accelerator with Air-Core Transformer”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 6D060, pp. 822-824.
- S. T. Artikova, R. B. Fiorito, A. G. Shkvarunets, C. P. Welsch, and H. D. Zhang, “Beam Halo Studies for CTF3”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEB075, pp. 2872-2874.
- J. Yan, T. L. Allison, and S. D. Witherspoon, “PC/104 Asyn Drivers at Jefferson Lab”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPMN012, pp. 898-900.
- F. Schillaci, “On the commissioning of the ELIMAIA plasma accelerator and the future medical application using the ELIMED beamline”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEODA2, unpublished.
- D. Abler, C. Carli, A. Garonna, and K. J. Peach, “Study of Beam Transport Lines for a Biomedical Research Facility at CERN based on LEIR”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 836-838.
- Y. C. Zhang, S. P. Li, H. H. Lu, S. C. Sun, and Y. F. Yang, “Preliminary Design of Cooling System for a PrFeB-based Cryogenic Permanent Magnet Undulator Prototype at IHEP”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2743-2745.
- Z. T. Zhao, “Shanghai Soft X-Ray Free Electron Laser Test Facility”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPC053, pp. 3011-3013.
- M. G. Zeitlin and A. N. Fedorova, “Nonlinear Dynamics of High-Brightness Beams”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPAH070, pp. 3006-3008.
- S.-C. Kim et al., “Low Current Bipolar Magnet Power Supply System at the PLS-II Storage Ring”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPD054, pp. 3635-3637.
- W. Radloff, “The Intensity Monitor Device for PETRA”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3370-3373.
- R. Rybaniec et al., “Real-time Estimation of Superconducting Cavities Parameters”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2456-2458.
- N. Thompson and C. Hill, “High gradient hybrid halbach quadrupoles with a novel 3-Bit gradient tuning system”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPM031, pp. 3621-3623.
- D. J. Scott et al., “Design Considerations for a Helical Undulator for the Production of Polarised Positrons for TESLA”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPKF064, pp. 458-460.
- M. Jaussi et al., “A Digital System for Longitudinal Emittance Blow-Up in the LHC”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPKS024, pp. 215-218.
- S.-C. Kim et al., “High Current Unipolar Magnet Power Supply System at the PLS-II Storage Ring”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPD055, pp. 3638-3640.
- H. Timko et al., “Longitudinal Beam Loss Studies of the CERN PS-to-SPS Transfer”, in Proc. 52nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'12), Beijing, China, Sep. 2012, paper WEO1C03, pp. 439-443.
- S. Stevenson, “A simulation of the Fermilab Main Injector dual power amplifier cavities”, in Proc. 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, pp. 698-701.
- K. Saito et al., “Superconducting RF Development for FRIB at MSU”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper THIOA02, pp. 790-794.
- D. Okamoto, Y. Honda, T. Sanuki, and T. Tauchi, “First Beam Test of the Tilt Monitor in the ATF2 Beam Line”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEOCMH01, pp. 2402-2404.
- Y. Li, J. V. Conway, X. Liu, and M. A. Palmer, “Electron Cloud Diagnostic Chambers with Various EC-suppression Coatings”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPFI088, pp. 3496-3498.
- H. Okuno et al., “Recent Achievements and Upgrade Programs at RIKEN Radioactive Isotope Beam Factory”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPD029, pp. 430-432.
Back to search