Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. Kirchgessner et al., “Superconducting RF Activities at Cornell University”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper SRF95A05, pp. 35-37.
[n] M. Palm, F. Moser, M. Benedikt, and A. Fabich, “Dose-homogeneity Driven Beam Delivery System Performance Requirements for MedAustron”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPS082, pp. 3624-3626.
[n] R. Ursic et al., “Beam Position Monitoring Using Intelligent Front-Ends and High Speed Interconnect Technologies”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WE614, pp. XX-XX.
[n] M. W. Poole and E. A. Seddon, “4GLS and the Prototype Energy Recovery Linac Project at Daresbury”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPKF063, pp. 455-457.
[n] F. Zimmermann, M. Benedikt, D. Schulte, and J. Wenninger, “Challenges for Highest Energy Circular Colliders”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. XX-XX. doi:10.18429/JACoW-IPAC2014-MOXAA01
[n] M. Palm, M. Benedikt, and A. Fabich, “Design Choices of the MedAustron Nozzles and Proton Gantry based on Modeling of Particle Scattering”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPS081, pp. 3621-3623.
[n] M. Giovannozzi, W. Scandale, and E. Todesco, “Evaluation of Dynamic Aperture in the Presence of Phase Space Distortions”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP080L, pp. 977-979.
[n] S. J. Brooks, J. Cintorino, A. K. Jain, and G. J. Mahler, “Production of Low Cost, High Field Quality Halbach Magnets”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4118-4120. doi:10.18429/JACoW-IPAC2017-THPIK007
[n] J. Roensch-Schulenburg et al., “Short SASE-FEL Pulses at FLASH”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper TUPSO64, pp. 379-382.
[n] A. Penirschke et al., “Grounded Coplanar Waveguide Transmission Lines as Pickups for Beam Position Monitoring in Particle Accelerators”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper TUPC29, pp. 438-441.
[n] J. M. Peterson et al., “Dynamic Aperture Measurements at the Tevatron”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 266-269.
[n] C. R. Dunnam, “Hall Effect Magnetic Field Regulation Systems for the CESR Injector”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 357-360.
[n] M. Pisharody et al., “High Power Window Tests on a 500 MHz Planar Window for the CESR Upgrade”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPQ02, pp. 1720-1722.
[n] Ch. Carli, S. Maury, and D. M, “Combined Longitudinal and Transverse Multiturn Injection in a Heavy Ion Accumulator”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9W008, pp. 976-978.
For LaTeX
Use Complete Form
For BibTeX
References
- J. Kirchgessner et al., “Superconducting RF Activities at Cornell University”, in Proc. 7th Int. Conf. RF Superconductivity (SRF'95), Gif-sur-Yvette, France, Oct. 1995, paper SRF95A05, pp. 35-37.
- M. Palm, F. Moser, M. Benedikt, and A. Fabich, “Dose-homogeneity Driven Beam Delivery System Performance Requirements for MedAustron”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPS082, pp. 3624-3626.
- R. Ursic et al., “Beam Position Monitoring Using Intelligent Front-Ends and High Speed Interconnect Technologies”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper WE614, pp. XX-XX.
- M. W. Poole and E. A. Seddon, “4GLS and the Prototype Energy Recovery Linac Project at Daresbury”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPKF063, pp. 455-457.
- F. Zimmermann, M. Benedikt, D. Schulte, and J. Wenninger, “Challenges for Highest Energy Circular Colliders”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. XX-XX.
- M. Palm, M. Benedikt, and A. Fabich, “Design Choices of the MedAustron Nozzles and Proton Gantry based on Modeling of Particle Scattering”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPS081, pp. 3621-3623.
- M. Giovannozzi, W. Scandale, and E. Todesco, “Evaluation of Dynamic Aperture in the Presence of Phase Space Distortions”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP080L, pp. 977-979.
- S. J. Brooks, J. Cintorino, A. K. Jain, and G. J. Mahler, “Production of Low Cost, High Field Quality Halbach Magnets”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4118-4120.
- J. Roensch-Schulenburg et al., “Short SASE-FEL Pulses at FLASH”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper TUPSO64, pp. 379-382.
- A. Penirschke et al., “Grounded Coplanar Waveguide Transmission Lines as Pickups for Beam Position Monitoring in Particle Accelerators”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper TUPC29, pp. 438-441.
- J. M. Peterson et al., “Dynamic Aperture Measurements at the Tevatron”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 266-269.
- C. R. Dunnam, “Hall Effect Magnetic Field Regulation Systems for the CESR Injector”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 357-360.
- M. Pisharody et al., “High Power Window Tests on a 500 MHz Planar Window for the CESR Upgrade”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WPQ02, pp. 1720-1722.
- Ch. Carli, S. Maury, and D. M, “Combined Longitudinal and Transverse Multiturn Injection in a Heavy Ion Accumulator”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9W008, pp. 976-978.
Back to search