Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. A. Clarke et al., “Status of the HeLiCal Contribution to the Polarised Positron Source for the International Linear Collider”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPLS072, pp. 715-717.
[n] C. Bracco, W. Bartmann, M. A. Fraser, B. Goddard, and A. Lechner, “Beam Based Measurements to Check Integrity of LHC Dump Protection Elements”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3908-3910. doi:10.18429/JACoW-IPAC2016-THPOR051
[n] Z. Parsa and T. Marshall, “Enhanced IFEL Performance Using a Novel Wiggler”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 6V039, pp. 642-644.
[n] H. Deruyter et al., “Damped Accelerator Structures for Future Linear e_ Colliders”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 156-159.
[n] Z.-D. Tsai et al., “Commissioning of the TPS Cooling System: Testing, Adjusting, Balancing and Numerical Simulation”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3209-3211. doi:10.18429/JACoW-IPAC2015-WEPHA042
[n] K. B. Mallory, “Applications of Microprocessors in Upgrading of Accelerator Controls”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1677-1681.
[n] R. Maier, U. Pfister, and J. Range, “The COSY-Julich Project April 1991 Status”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2808-2811.
[n] D. Valuch, O. Brunner, and N. Schwerg, “Performance of the Arc Detectors of LHC High Power RF System”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPS072, pp. 1704-1706.
[n] J. Alessi et al., “The New AGS H- RFQ Preinjector”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 538-541.
[n] A. Beckmann, “Automated Verification Environment for TwinCAT PLC Programs”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC082, pp. 288-291.
[n] J. A. Holmes, S. M. Cousineau, S. Henderson, and M. A. Plum, “Simulations for SNS Ring Commissioning”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH130, pp. 348-350.
[n] Q. Gan, P. Chu, and C. H. Wang, “Study on a New Framework of the Accelerator Application Software Based on Eclipse”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP077, pp. 818-820.
[n] R. Sah, A. Dudas, J. W. Kwan, and M. L. Neubauer, “High Current Density Lithium Ion Source”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEC074, pp. 4229-4231.
[n] M. Miski-Oglu et al., “Progress in SRF CH-Cavities for the HELIAC CW Linac at GSI”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 1206-1212. doi:10.18429/JACoW-SRF2019-FRCAA4
[n] S. A. Chilingaryan et al., “Computing Infrastructure for Online Monitoring and Control of High-throughput DAQ Electronics”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper WCO201, pp. 10-12.
[n] M. Schuh, F. Gerigk, J. Tuckmantel, and C. P. Welsch, “Higher Order Mode Analysis of the SPL Cavities”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPE082, pp. 4713-4715.
[n] Y. Wang et al., “Status of the NSRL Storage Ring UHV System After Project-II”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPPE056, pp. 3334-3336.
[n] S. Liu, P. Bambade, S. Bai, T. Tauchi, and N. Terunuma, “Development of Diamond Sensors for Beam Halo and Compton Spectrum Diagnostics After The Interaction Point of ATF2”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPME003, pp. 470-472.
[n] W. L. Waldron and L. L. Reginato, “TUB07”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper TUB07, pp. 446-448.
[n] P. Chu, T. D. Brown, R. Gaul, S. Peng, E. T. Berryman, and V. Vuppala, “FRIB High-level Software Architecture”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPR014, pp. 3996-3998.
[n] C. Rathjen, S. Blanchard, B. Henrist, K. Koelemeijer, B. Libera, and P. Lutkiewicz, “Ultrathin Polyimide-Stainless Steel Heater for Vacuum System Bake-Out”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPPE043, pp. 2744-2746.
[n] K. Umemori et al., “Status of Main Linac Cryomodule Development for Compact ERL Project”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOOBC02, pp. 67-69.
[n] A. Kalinin and V. Smaluk Budker Institute of Nuclear Physics, “Turn-By-Turn Phase Space Diagram Construction for Non-Linear Betatron Oscillation”, in Proc. DIPAC'99, Chester, UK, May 1999, paper PS06, pp. XX-XX.
[n] B. Dalena, A. Chanc?®, R. De Maria, and J. Payet, “Alternative High Luminosity LHC Matching Section Layout”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 990-992. doi:10.18429/JACoW-IPAC2014-TUPRO001
[n] M. Jablonka, B. Aune, and Ch. Magne, “A Scheme for a Fully Superconducting Electron Injector”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 478-481.
[n] S. P. Antipov et al., “Microwave Active Media Studies for PASER”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5RFP001, pp. 4535-4537.
For LaTeX
Use Complete Form
For BibTeX
References
- J. A. Clarke et al., “Status of the HeLiCal Contribution to the Polarised Positron Source for the International Linear Collider”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPLS072, pp. 715-717.
- C. Bracco, W. Bartmann, M. A. Fraser, B. Goddard, and A. Lechner, “Beam Based Measurements to Check Integrity of LHC Dump Protection Elements”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3908-3910.
- Z. Parsa and T. Marshall, “Enhanced IFEL Performance Using a Novel Wiggler”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 6V039, pp. 642-644.
- H. Deruyter et al., “Damped Accelerator Structures for Future Linear e_ Colliders”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 156-159.
- Z.-D. Tsai et al., “Commissioning of the TPS Cooling System: Testing, Adjusting, Balancing and Numerical Simulation”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3209-3211.
- K. B. Mallory, “Applications of Microprocessors in Upgrading of Accelerator Controls”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1677-1681.
- R. Maier, U. Pfister, and J. Range, “The COSY-Julich Project April 1991 Status”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2808-2811.
- D. Valuch, O. Brunner, and N. Schwerg, “Performance of the Arc Detectors of LHC High Power RF System”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPS072, pp. 1704-1706.
- J. Alessi et al., “The New AGS H- RFQ Preinjector”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 538-541.
- A. Beckmann, “Automated Verification Environment for TwinCAT PLC Programs”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC082, pp. 288-291.
- J. A. Holmes, S. M. Cousineau, S. Henderson, and M. A. Plum, “Simulations for SNS Ring Commissioning”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH130, pp. 348-350.
- Q. Gan, P. Chu, and C. H. Wang, “Study on a New Framework of the Accelerator Application Software Based on Eclipse”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper THP077, pp. 818-820.
- R. Sah, A. Dudas, J. W. Kwan, and M. L. Neubauer, “High Current Density Lithium Ion Source”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEC074, pp. 4229-4231.
- M. Miski-Oglu et al., “Progress in SRF CH-Cavities for the HELIAC CW Linac at GSI”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 1206-1212.
- S. A. Chilingaryan et al., “Computing Infrastructure for Online Monitoring and Control of High-throughput DAQ Electronics”, in Proc. 10th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'14), Karlsruhe, Germany, Oct. 2014, paper WCO201, pp. 10-12.
- M. Schuh, F. Gerigk, J. Tuckmantel, and C. P. Welsch, “Higher Order Mode Analysis of the SPL Cavities”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPE082, pp. 4713-4715.
- Y. Wang et al., “Status of the NSRL Storage Ring UHV System After Project-II”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPPE056, pp. 3334-3336.
- S. Liu, P. Bambade, S. Bai, T. Tauchi, and N. Terunuma, “Development of Diamond Sensors for Beam Halo and Compton Spectrum Diagnostics After The Interaction Point of ATF2”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPME003, pp. 470-472.
- W. L. Waldron and L. L. Reginato, “TUB07”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper TUB07, pp. 446-448.
- P. Chu, T. D. Brown, R. Gaul, S. Peng, E. T. Berryman, and V. Vuppala, “FRIB High-level Software Architecture”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPR014, pp. 3996-3998.
- C. Rathjen, S. Blanchard, B. Henrist, K. Koelemeijer, B. Libera, and P. Lutkiewicz, “Ultrathin Polyimide-Stainless Steel Heater for Vacuum System Bake-Out”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPPE043, pp. 2744-2746.
- K. Umemori et al., “Status of Main Linac Cryomodule Development for Compact ERL Project”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOOBC02, pp. 67-69.
- A. Kalinin and V. Smaluk Budker Institute of Nuclear Physics, “Turn-By-Turn Phase Space Diagram Construction for Non-Linear Betatron Oscillation”, in Proc. 4th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'99), Chester, UK, May 1999, paper PS06, pp. XX-XX.
- B. Dalena, A. Chanc?®, R. De Maria, and J. Payet, “Alternative High Luminosity LHC Matching Section Layout”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 990-992.
- M. Jablonka, B. Aune, and Ch. Magne, “A Scheme for a Fully Superconducting Electron Injector”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 478-481.
- S. P. Antipov et al., “Microwave Active Media Studies for PASER”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5RFP001, pp. 4535-4537.
Back to search
