Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] H. H. Li et al., “Beam Dynamics in the SSRF Storage Ring”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEA045, pp. 2591-2593.
[n] G. O. Bolme et al., “Measurement of RF Surface Efficiency at Cryogenic Temperatures Using a Coaxial Resonant Cavity”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper MO459, pp. 213-215.
[n] E. C. Hartwig, “PEP II RF System”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3621-3623.
[n] J. Grillenberger, M. Humbel, J. Y. Raguin And P, and A. Schmelzbach, “Commissioning And Tuning Of The New Buncher System In The 870 Kev Injection Beamline”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 464-466.
[n] Y. Minagawa, T. Fujita, T. Ieiri, T. Kasuga, and T. Obina, “Transverse Sawtooth Instability Observed in Photon Factory Advanced Ring”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPPB029, pp. 3080-3082.
[n] Y. Bao, C. Blume, A. Caldwell, and D. Greenwald, “Frictional Cooling Demonstration at MPP”, in Proc. COOL'09, Lanzhou, China, Aug.-Sep. 2009, paper TUM1MCCO03, pp. 55-58.
[n] J. Feuchtwanger et al., “Status of the Ion Sources at ESS-Bilbao”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPC030, pp. 1227-1229.
[n] O. A. Anderson and L. L. LoDestro, “Analytic Solution of the Envelope Equations for an Undepressed Matched Beam in a Quadrupole Doublet Channel”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5PFP007, pp. 4320-4322.
[n] Y. W. An et al., “The Operation Status of CSNS Front End”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2024-2026. doi:10.18429/JACoW-IPAC2019-TUPTS038
[n] H. Piekarz, “Project X with Superconducting Rapid Cycling Synchrotron”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPP020, pp. 3773-3775.
[n] W. Chou, J. Griffin, K. Y. Ng, A. Takagi, D. Wildman, and H. Zheng, “Barrier RF Stacking at Fermilab”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAG016, pp. 2922-2924.
[n] R. C. York, J. S. McCarthy, B. E. Norum, and J. C. Sheppard, “A Proposal for a High Current, High Duty Factor Electron Accelerator”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2080-2083.
[n] S. M. Reisdorf, B. A. Conrad, D. A. Potter, and P. D. Reisdorf, “Rapid Application Development Using Web 2.0 Technologies”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THCOAAB05, pp. 1058-1061.
[n] J. R. Nelson et al., “National Ignition Facility (NIF) Dilation X-ray Imager (DIXI) Diagnostic Instrumentation and Control System”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC073, pp. 751-754.
[n] L. K. Mestha, C. M. Kwan, R. C. Webber, and K. S. Yeung, “A General Control Model for Designing Beam Control Feedback Loops”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1076-1079.
[n] T. Wang et al., “Recent Progress on Beam Stability Study in the PSR”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAC29, pp. 3146-3148.
[n] D. Xie, J. Y. Benitez, C. M. Lyneis, D. S. Todd, and W. Lu, “Recent production of intense high charge ion beams with VENUS”, in Proc. ECRIS'16, Busan, Korea, Aug.-Sep. 2016, pp. 141-145. doi:10.18429/JACoW-ECRIS2016-THAO01
[n] D. Stratakis, B. E. Drendel, N. S. Froemming, J. P. Morgan, and M. J. Syphers, “Commissioning and First Results of the Fermilab Muon Campus”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 41-44. doi:10.18429/JACoW-IPAC2019-MOZZPLM3
[n] P. Shcherbakov et al., “MAGNETIC PROPERTIES OF SILICON ELECTRICAL STEELS AND ITS APPLICATION IN FAST CYCLING SUPERCONDUCTING MAGNETS AT LOW TEMPERATURES”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper THFP03, pp. XX-XX.
[n] Z. Kormány and I. Ander, “New Digital NMR System for an Old Analyzing Magnet”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC089, pp. 1215-1217.
[n] M. Sawabe, H. Hayano, A. Komiya, H. Monjushiro, T. Saeki, and M. Satou, “Long-Term Monitoring of 2ndÔÇôPeriod EP-Electrolyte in STF-EP Facility at KEK”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper TUPO039, pp. 467-471.
[n] T. Plettner et al., “Inverse-Transition Radiation Laser Acceleration Experiments at SLAC”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMS080, pp. 3172-3174.
[n] E. Bouquerel, “Design Status of the ESSvSB Switchyard”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 125-127. doi:10.18429/JACoW-IPAC2015-MOPWA017
[n] M. Boscolo et al., “Luminosity Measurement at DAFNE for Crab Waist Scheme”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC065, pp. 1203-1205.
[n] L. Ouyang, M. Gu, D. M. Li, Q. Yuan, and M. Z. Zhang, “Transverse RF Kicker Excitation and Longitudinal RF Noise Diffusion for Slow Extraction from SAPT”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPFI046, pp. 386-388.
[n] J. T. Bradley III, D. Rees, A. Scheinker, and R. L. Sheffield, “High Power RF Requirements for Driving Discontinuous Bunch Trains in the MaRIE Linac”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 320-322. doi:10.18429/JACoW-LINAC2016-MOP106016
[n] C. S. Huang et al., “Development of Operating Alarm System at TPS”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2684-2686. doi:10.18429/JACoW-IPAC2019-WEPGW085
[n] P. Kolb, N. Mueller, and A. Schempp, “A Beam Transport System for the Frankfurt Funneling Experiment”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5REP062, pp. 4914-4916.
[n] Y. Eidelman and V. Yakimenko, “The Spin Motion Calculation Using Lie Method in Collider Nonlinear Magnetic Field”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 269-272.
[n] S. V. Milton et al., “The APS SASE FEL: Status and Commissioning Results”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP95, pp. 2483-2485.
[n] R. A. Lerche et al., “The NIF Integrated Timing System - Design and Performance”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper TUAP069, pp. XX-XX.
[n] S. J. Pasky et al., “A New SLED Test Stand in the APS Injector Linac”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP003, pp. 806-808.
[n] H. Nishimura, J. L. McDonald, and C. Timossi, “Cross Platform SCA Component using C++ Builder and Kylix”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPE028, pp. 2385-2386.
[n] L. O. Dallin, D. Bodnarchuk, and T. Summers, “Optimizing Beam Brightness at the Canadian Light Source”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMN005, pp. 920-922.
[n] K. Evans, “The EPICS Process Variable Gateway -- Version 2”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P1_033.
[n] C. M. S. Sears et al., “Demonstration of Optical Microbunching and Net Acceleration at 0.8 microns”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEXKI02, pp. 1894-1898.
[n] W. K. Tucker, D. E. Hasti, and S. L. Shope, “Recirculating Electron Beam Linac”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 957-960.
[n] K. C. Wilhelmsen et al., “Automatic Alignment Upgrade of Advanced Radiographic Capability for the National Ignition Facility”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC141, pp. 1384-1387.
[n] B. G. Chidley, J. C. Brown, G. E. McMichael, S. O. Schriber, M. R. Shubaly, and J. Ungrin, “Design and Constraints for the ZEBRA Injector, RFQ and DTL”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper B06, pp. 49-52.
[n] A. I. Sukhanov, I. L. Rakhno, N. Solyak, and I. S. Tropin, “Dark Current Studies in ILC Main Linac”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 855-857. doi:10.18429/JACoW-LINAC2016-THPLR007
[n] J. R. Freeman and J. S. Wagner, “Numerical Models of Beam Dynamics in Ion Induction Linacs”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TU412, pp. 332-334.
[n] D. Boussard, L. Evans, J. Gareyte, T. Linnecar, W. Mills, and E. J. N. Wilson, “Acceleration and Storage of a Dense Single Bunch in the CERN SPS”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3484-3487.
[n] W. H. Hwang, H. G. Kim, W. W. Lee, S. J. Park, and Y. J. Han, “Measurement of Beam Energy Drift in PLS 2.5 GeV Linac”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper TUP11010, pp. XX-XX.
[n] O. V. Sinitsyn, T. M. Antonsen, and G. S. Nusinovich, “Self-consistent Time-dependent Quasi-3D Model of Multipactor in Dielectric-loaded Accelerating Structures”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC041, pp. 1090-1092.
[n] R. Nagaoka et al., “Perfomance of Bunch by Bunch Transverse Feedback and Evolution of Collective Effects at SOLEIL”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6REP079, pp. 4138-4140.
[n] J. F. O et al., “PSR Electron Cloud Detector and Suppressor Mechanical Design and Fabrication”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMS054, pp. 4117-4119.
[n] A. H. Botha and H. N. Jungwirth, “The Status of the South African National Accelerator Centre”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper F04, pp. 263-266.
[n] L. Wenliang et al., “Development of a 1.5 GHz High-power CW Magnetron for SRF Accelerator”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 908-910. doi:10.18429/JACoW-LINAC2018-THPO100
[n] Y. Shimosaki et al., “Optimization of Lower Emittance Optics for the SPring-8 Storage Ring”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPC013, pp. 1182-1184.
[n] S. Banna, L. Schachter, J. Nation, and P. Wang, “Interaction of TM01 and HEM11 in a TWT”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA91, pp. 3609-3611.
[n] S. W. Mosko, D. T. Dowling, and D. K. Olsen, “Prototype RF Cavity for the HISTRAP Accelerator”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 193-196.
[n] B. K. Sahu et al., “Phase Locking of Superconducting Quarter Wave Resonator by Piezoelectric Actuator”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEC013, pp. 2920-2922.
[n] A. Halavanau and P. Piot, “Numerical Investigation of a Cascaded Longitudinal Space-Charge Amplifier at the Fermilab's Advanced Superconducting Test Accelerator”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1850-1852. doi:10.18429/JACoW-IPAC2015-TUPMA007
[n] J. T. M. Lyles et al., “Installation and Operation of Replacement 201 MHz High Power RF System at LANSCE”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3485-3488. doi:10.18429/JACoW-IPAC2015-WEPWI002
[n] N. Toge et al., “Recent Commissioning Experience on the SLC Arcs”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1844-1847.
[n] R. Keller, P. Allison, and J. D. Sherman, “Use of a Minimum-Elipse Criterion in the Study of Ion-Beam Extraction Systems”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2579-2582.
[n] C. Gonzalez-Ortiz and R. Ainsworth, “Single-bunch instabilities at the Fermilab Recycler Ring”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 676-680. doi:10.18429/JACoW-NAPAC2025-WECD03
[n] C. Zannini et al., “Beam-induced heating mitigation of the SPS kickers: a crucial upgrade to move towards HL-LHC beam intensities”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3486-3489. doi:10.18429/JACoW-IPAC2023-WEPL157
[n] J.-C. Denard, R. Aiello, A. Carniel, and T. Monaci, “Beam Position Monitoring System for ELETTRA”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 726-729.
[n] R. Joshel, S. Childress, C. Crawford, W. Kissel, and S. Lackey, “Automated Beam Position and Split Control for the Fermilab Switchyard”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 515-516.
[n] D. Gassner et al., “Design Status of the Electron-Ion Collider Beam Instrumentation”, presented at the IPAC'23, Venice, Italy, May 2023, paper THPL053, unpublished.
[n] N. Malitsky, K. Shroff, and C. Xiaomeng, “Bringing Accelerator Models to the Control System Studio”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP165, pp. 403-404.
[n] L. A. Ahrens et al., “High Intensity Performance of the Brookhaven AGS”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRAR3, pp. 614-616.
[n] M. Xie, “Laser Acceleration with Open Waveguides”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA128, pp. 3678-3680.
[n] L. Celona et al., “TRASCO 100 MeV High Intensity Proton Linac”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP6B15, pp. 857-859.
[n] Y. Xiao, Y. Liu, and Y. Leng, “Joint analysis of beam loss and beam position during the injection process at Hefei light source”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 215-219. doi:10.18429/JACoW-IBIC2025-MOPMO16
[n] T. E. Oseroff, M. Liepe, B. Moeckly, M. J. Sowa, and Z. Sun, “RF Characterization of Novel Superconducting Materials and Multilayers”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 950-955. doi:10.18429/JACoW-SRF2019-THP044
[n] L. Zhang, “Solid Pulse Transforming Line for DWA”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPZ004, pp. 2769-2771.
[n] K. J. Suthar et al., “Investigation of Various Fabrication Methods to Produce a 180GHz Corrugated Waveguide Structure in 2mm Diameter ?¡0.5m ?¡Long Copper Tube for the Compact Wakefield Accelerator for FEL Facility”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 286-289. doi:10.18429/JACoW-NAPAC2019-MOPLO23
[n] K. Seiya et al., “Status of Slip Stacking at Fermilab Main Injector”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MOPA004, pp. 347-349.
[n] Y. C. Nie, M. Jonker, and R. Schmidt, “Beam Related Machine Protection of the Future Circular Collider”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2063-2066. doi:10.18429/JACoW-IPAC2017-TUPVA012
[n] S. Rodriguez Esparza et al., “Mechanical Design and Evaluation of the MP-11-like Wire Scanner Prototype”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPR083, pp. 984-986.
[n] S. Assadi, F. Tecker, and M. J. Yang, “Optics Measurement of the Fermilab Main Injector 8-GeV Transfer Line”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP29, pp. 720-722.
[n] U. Dorda, R. W. Assmann, K. Floettmann, B. Marchetti, Y. C. Nie, and J. Zhu, “Simulation Results of the Beam Transport of Ultra-Short Electron Bunches in Existing Beam Transfer Lines to Sinbad”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1466-1468. doi:10.18429/JACoW-IPAC2015-TUPWA028
[n] S. Cao, L. Lai, J. Chen, and Y. Leng, “BAM system and machine stability at SXFEL”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4866-4868. doi:10.18429/JACoW-IPAC2023-THPL177
[n] R. Maier, B. Seligmann, and H. J. Stein, “Electron Cooling in COSY-Juelich”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1580-1583.
[n] C. Timossi and M. J. Chin, “The Use of FPGAs As A Platform for Distributed Control Systems”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P1_046.
[n] V. L. Serov, “Isotope Production for Medical and Technical Use at Moscow Meson Factory Linac”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper MOP61, pp. 213-215.
[n] V. Anashin et al., “Photodesorption and Power Testing of the SR Crotch-Absorber for BESSY-II”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP06D, pp. 2163-2165.
[n] S.-W. Kim, “Quench Simulation Program for Superconducting Accelerator Magnets”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH096, pp. 3457-3459.
[n] A. H. Lumpkin, L. Emery, B. X. Yang, and C. Y. Yao, “X-Ray Imaging of the APS Storage Ring Beam Stability Effects: from the Alaskan Earthquake to Undulator Field Changes”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPB006, pp. 2423-2425.
[n] E. R. Harms et al., “Experience With LCLS-II Cryomodule Testing at Fermilab”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 1018-1022. doi:10.18429/JACoW-SRF2019-THP060
[n] L. Grisham, S. K. Hahto, S. T. Hahto, J. Kwan, and K. N. Leung, “Proof-of-Concept Experiments for Negative Ion Driver Beams for Heavy Ion Fusion”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FPAB010, pp. 3309-3311.
[n] Q. Xia, L. Zheng, and Y. Du, “Experimental design for validating the feasibility of in-situ plasma cleaning of normal conducting copper cavities”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3901-3903. doi:10.18429/JACoW-IPAC2024-THPS66
[n] L. H. Ding, J. Liang, H. Liu, and Z. P. Xie, “Active Magnetic Field Compensation System for SRF Cavities”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 101-103. doi:10.18429/JACoW-IBIC2018-MOPB13
[n] K. Kan et al., “Measurement of Temporal Electric Field of Electron Bunch using Photoconductive Antenna”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1623-1625. doi:10.18429/JACoW-IPAC2015-TUPJE007
[n] D. A. Chermoshentsev, A. Feschenko, and S. A. Gavrilov, “Electrodynamic Characteristics of RF-Deflector for Bunch Shape Monitor”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 659-661. doi:10.18429/JACoW-RUPAC2016-THPSC055
[n] Z. Insepov, A. Hassanein, and D. Swenson, “Computer Simulation of Surface Modification with Ion Beams”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper TUP51, pp. 363-365.
[n] A. H. Botha et al., “Modification of the Extraction System of the Pretoria Cyclotron”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper B33, pp. 137-140.
[n] R. Byrns and M. A. Green, “The ESCAR Helium Refrigeration System”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1168-1172.
[n] S. A. Gavrilov, A. Feschenko, and P. I. Reinhardt-Nickoulin, “INR RAS Instrumentation for Bunch Shape and Beam Cross-Section Monitoring”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 204-206. doi:10.18429/JACoW-RUPAC2016-THCBSH01
[n] A. Smirnov, E. Ivanov, A. Pronikov, and S. Kutsaev, “High-voltage pulsed power generator for beam injection systems”, presented at the NAPAC'25, Sacramento, California, USA, Aug. 2025, paper WEP045, unpublished.
[n] M. J. Yang, “Tevatron Lattice Function Measurement using TBT Data”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP13G, pp. 1647-1652.
[n] K. W. Struve et al., “Status of Beam Transport with the ETA and ATA Accelerators”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper THP0042, pp. 446-448.
[n] I. L. Rakhno, A. I. Drozhdin, N. V. Mokhov, V. I. Sidorov, and I. S. Tropin, “Improving the Fermilab Booster Notching Efficiency, Beam Losses and Radiation Levels”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPD083, pp. 562-564.
[n] B. C. Heisen et al., “Karabo: An Integrated Software Framework Combining Control, Data Management, and Scientific Computing Tasks”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper FRCOAAB02, pp. 1465-1468.
[n] B. B. Baricevic, A. Kosicek, J. Menart, and M. Znidarcic, “Evaluation of New Generation Heavy Particle Beam Diagnostics Instrumentation”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC123, pp. 1305-1307.
[n] M. Steinhorst et al., “Low Level RF ERL Experience at the S-DALINAC”, in Proc. ERL'19, Berlin, Germany, Sep. 2019, pp. 52-55. doi:10.18429/JACoW-ERL2019-TUCOZBS05
[n] A. Moretti and P. F. Schultz, “Operation of Argonne National Laboratory's RF Particle Separator in the Travelling Wave Mode”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1113-1116.
[n] F.-J. Decker et al., “Effects of Temperature Variation on the SLC Linac RF System”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPR15, pp. 1821-1823.
[n] M. Jablonka, B. Aune, and Ch. Magne, “A Scheme for a Fully Superconducting Electron Injector”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 478-481.
[n] H. V. Walz, R. C. Agostini, L. Barker, R. Cherkassky, T. Constant, and R. Mathieson, “Distributed Supervisory Protection Interlock System”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1928-1931.
[n] S. A. Gavrilov et al., “Beam Diagnostics and Instrumentation Upgrade for Multipurpose Research Complex of INR RAS”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 667-669. doi:10.18429/JACoW-RUPAC2016-THPSC058
[n] G. P. Lawrence, “Critical Design Issues of High Intensity Proton Linacs”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 236-241.
[n] N. Bongers et al., “First Considerations on Stochastic Cooling in Cosy Juelich”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 511-514.
For LaTeX
Use Complete Form
For BibTeX
References
- H. H. Li et al., “Beam Dynamics in the SSRF Storage Ring”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEA045, pp. 2591-2593.
- G. O. Bolme et al., “Measurement of RF Surface Efficiency at Cryogenic Temperatures Using a Coaxial Resonant Cavity”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper MO459, pp. 213-215.
- E. C. Hartwig, “PEP II RF System”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3621-3623.
- J. Grillenberger, M. Humbel, J. Y. Raguin And P, and A. Schmelzbach, “Commissioning And Tuning Of The New Buncher System In The 870 Kev Injection Beamline”, in Proc. 18th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'07), Giardini-Naxos, Italy, Oct. 2007, pp. 464-466.
- Y. Minagawa, T. Fujita, T. Ieiri, T. Kasuga, and T. Obina, “Transverse Sawtooth Instability Observed in Photon Factory Advanced Ring”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPPB029, pp. 3080-3082.
- Y. Bao, C. Blume, A. Caldwell, and D. Greenwald, “Frictional Cooling Demonstration at MPP”, in Proc. 7th Workshop on Beam Cooling and Related Topics (COOL'09), Lanzhou, China, Aug.-Sep. 2009, paper TUM1MCCO03, pp. 55-58.
- J. Feuchtwanger et al., “Status of the Ion Sources at ESS-Bilbao”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPC030, pp. 1227-1229.
- O. A. Anderson and L. L. LoDestro, “Analytic Solution of the Envelope Equations for an Undepressed Matched Beam in a Quadrupole Doublet Channel”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5PFP007, pp. 4320-4322.
- Y. W. An et al., “The Operation Status of CSNS Front End”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2024-2026.
- H. Piekarz, “Project X with Superconducting Rapid Cycling Synchrotron”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPP020, pp. 3773-3775.
- W. Chou, J. Griffin, K. Y. Ng, A. Takagi, D. Wildman, and H. Zheng, “Barrier RF Stacking at Fermilab”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPAG016, pp. 2922-2924.
- R. C. York, J. S. McCarthy, B. E. Norum, and J. C. Sheppard, “A Proposal for a High Current, High Duty Factor Electron Accelerator”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2080-2083.
- S. M. Reisdorf, B. A. Conrad, D. A. Potter, and P. D. Reisdorf, “Rapid Application Development Using Web 2.0 Technologies”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THCOAAB05, pp. 1058-1061.
- J. R. Nelson et al., “National Ignition Facility (NIF) Dilation X-ray Imager (DIXI) Diagnostic Instrumentation and Control System”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC073, pp. 751-754.
- L. K. Mestha, C. M. Kwan, R. C. Webber, and K. S. Yeung, “A General Control Model for Designing Beam Control Feedback Loops”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1076-1079.
- T. Wang et al., “Recent Progress on Beam Stability Study in the PSR”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WAC29, pp. 3146-3148.
- D. Xie, J. Y. Benitez, C. M. Lyneis, D. S. Todd, and W. Lu, “Recent production of intense high charge ion beams with VENUS”, in Proc. 22nd Int. Workshop on ECR Ion Sources (ECRIS'16), Busan, Korea, Aug.-Sep. 2016, pp. 141-145.
- D. Stratakis, B. E. Drendel, N. S. Froemming, J. P. Morgan, and M. J. Syphers, “Commissioning and First Results of the Fermilab Muon Campus”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 41-44.
- P. Shcherbakov et al., “MAGNETIC PROPERTIES OF SILICON ELECTRICAL STEELS AND ITS APPLICATION IN FAST CYCLING SUPERCONDUCTING MAGNETS AT LOW TEMPERATURES”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper THFP03, pp. XX-XX.
- Z. Kormány and I. Ander, “New Digital NMR System for an Old Analyzing Magnet”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC089, pp. 1215-1217.
- M. Sawabe, H. Hayano, A. Komiya, H. Monjushiro, T. Saeki, and M. Satou, “Long-Term Monitoring of 2ndÔÇôPeriod EP-Electrolyte in STF-EP Facility at KEK”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper TUPO039, pp. 467-471.
- T. Plettner et al., “Inverse-Transition Radiation Laser Acceleration Experiments at SLAC”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMS080, pp. 3172-3174.
- E. Bouquerel, “Design Status of the ESSvSB Switchyard”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 125-127.
- M. Boscolo et al., “Luminosity Measurement at DAFNE for Crab Waist Scheme”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPC065, pp. 1203-1205.
- L. Ouyang, M. Gu, D. M. Li, Q. Yuan, and M. Z. Zhang, “Transverse RF Kicker Excitation and Longitudinal RF Noise Diffusion for Slow Extraction from SAPT”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPFI046, pp. 386-388.
- J. T. Bradley III, D. Rees, A. Scheinker, and R. L. Sheffield, “High Power RF Requirements for Driving Discontinuous Bunch Trains in the MaRIE Linac”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 320-322.
- C. S. Huang et al., “Development of Operating Alarm System at TPS”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2684-2686.
- P. Kolb, N. Mueller, and A. Schempp, “A Beam Transport System for the Frankfurt Funneling Experiment”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5REP062, pp. 4914-4916.
- Y. Eidelman and V. Yakimenko, “The Spin Motion Calculation Using Lie Method in Collider Nonlinear Magnetic Field”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 269-272.
- S. V. Milton et al., “The APS SASE FEL: Status and Commissioning Results”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEP95, pp. 2483-2485.
- R. A. Lerche et al., “The NIF Integrated Timing System - Design and Performance”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper TUAP069, pp. XX-XX.
- S. J. Pasky et al., “A New SLED Test Stand in the APS Injector Linac”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5PFP003, pp. 806-808.
- H. Nishimura, J. L. McDonald, and C. Timossi, “Cross Platform SCA Component using C++ Builder and Kylix”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPE028, pp. 2385-2386.
- L. O. Dallin, D. Bodnarchuk, and T. Summers, “Optimizing Beam Brightness at the Canadian Light Source”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPMN005, pp. 920-922.
- K. Evans, “The EPICS Process Variable Gateway -- Version 2”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper P1_033.
- C. M. S. Sears et al., “Demonstration of Optical Microbunching and Net Acceleration at 0.8 microns”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEXKI02, pp. 1894-1898.
- W. K. Tucker, D. E. Hasti, and S. L. Shope, “Recirculating Electron Beam Linac”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 957-960.
- K. C. Wilhelmsen et al., “Automatic Alignment Upgrade of Advanced Radiographic Capability for the National Ignition Facility”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THPPC141, pp. 1384-1387.
- B. G. Chidley, J. C. Brown, G. E. McMichael, S. O. Schriber, M. R. Shubaly, and J. Ungrin, “Design and Constraints for the ZEBRA Injector, RFQ and DTL”, in Proc. 1981 Linear Accelerator Conf. (LINAC'81), Santa Fe, NM, USA, Oct. 1981, paper B06, pp. 49-52.
- A. I. Sukhanov, I. L. Rakhno, N. Solyak, and I. S. Tropin, “Dark Current Studies in ILC Main Linac”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 855-857.
- J. R. Freeman and J. S. Wagner, “Numerical Models of Beam Dynamics in Ion Induction Linacs”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TU412, pp. 332-334.
- D. Boussard, L. Evans, J. Gareyte, T. Linnecar, W. Mills, and E. J. N. Wilson, “Acceleration and Storage of a Dense Single Bunch in the CERN SPS”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3484-3487.
- W. H. Hwang, H. G. Kim, W. W. Lee, S. J. Park, and Y. J. Han, “Measurement of Beam Energy Drift in PLS 2.5 GeV Linac”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper TUP11010, pp. XX-XX.
- O. V. Sinitsyn, T. M. Antonsen, and G. S. Nusinovich, “Self-consistent Time-dependent Quasi-3D Model of Multipactor in Dielectric-loaded Accelerating Structures”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC041, pp. 1090-1092.
- R. Nagaoka et al., “Perfomance of Bunch by Bunch Transverse Feedback and Evolution of Collective Effects at SOLEIL”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6REP079, pp. 4138-4140.
- J. F. O et al., “PSR Electron Cloud Detector and Suppressor Mechanical Design and Fabrication”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMS054, pp. 4117-4119.
- A. H. Botha and H. N. Jungwirth, “The Status of the South African National Accelerator Centre”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper F04, pp. 263-266.
- L. Wenliang et al., “Development of a 1.5 GHz High-power CW Magnetron for SRF Accelerator”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 908-910.
- Y. Shimosaki et al., “Optimization of Lower Emittance Optics for the SPring-8 Storage Ring”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPC013, pp. 1182-1184.
- S. Banna, L. Schachter, J. Nation, and P. Wang, “Interaction of TM01 and HEM11 in a TWT”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA91, pp. 3609-3611.
- S. W. Mosko, D. T. Dowling, and D. K. Olsen, “Prototype RF Cavity for the HISTRAP Accelerator”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 193-196.
- B. K. Sahu et al., “Phase Locking of Superconducting Quarter Wave Resonator by Piezoelectric Actuator”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEC013, pp. 2920-2922.
- A. Halavanau and P. Piot, “Numerical Investigation of a Cascaded Longitudinal Space-Charge Amplifier at the Fermilab's Advanced Superconducting Test Accelerator”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1850-1852.
- J. T. M. Lyles et al., “Installation and Operation of Replacement 201 MHz High Power RF System at LANSCE”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3485-3488.
- N. Toge et al., “Recent Commissioning Experience on the SLC Arcs”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1844-1847.
- R. Keller, P. Allison, and J. D. Sherman, “Use of a Minimum-Elipse Criterion in the Study of Ion-Beam Extraction Systems”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2579-2582.
- C. Gonzalez-Ortiz and R. Ainsworth, “Single-bunch instabilities at the Fermilab Recycler Ring”, in Proc. 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, pp. 676-680.
- C. Zannini et al., “Beam-induced heating mitigation of the SPS kickers: a crucial upgrade to move towards HL-LHC beam intensities”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPL157, pp. 3486-3489.
- J.-C. Denard, R. Aiello, A. Carniel, and T. Monaci, “Beam Position Monitoring System for ELETTRA”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 726-729.
- R. Joshel, S. Childress, C. Crawford, W. Kissel, and S. Lackey, “Automated Beam Position and Split Control for the Fermilab Switchyard”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 515-516.
- D. Gassner et al., “Design Status of the Electron-Ion Collider Beam Instrumentation”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPL053, unpublished.
- N. Malitsky, K. Shroff, and C. Xiaomeng, “Bringing Accelerator Models to the Control System Studio”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP165, pp. 403-404.
- L. A. Ahrens et al., “High Intensity Performance of the Brookhaven AGS”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRAR3, pp. 614-616.
- M. Xie, “Laser Acceleration with Open Waveguides”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA128, pp. 3678-3680.
- L. Celona et al., “TRASCO 100 MeV High Intensity Proton Linac”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP6B15, pp. 857-859.
- Y. Xiao, Y. Liu, and Y. Leng, “Joint analysis of beam loss and beam position during the injection process at Hefei light source”, in Proc. 14th International Beam Instrumentation Conference (IBIC'25), Liverpool, UK, Sep. 2025, pp. 215-219.
- T. E. Oseroff, M. Liepe, B. Moeckly, M. J. Sowa, and Z. Sun, “RF Characterization of Novel Superconducting Materials and Multilayers”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 950-955.
- L. Zhang, “Solid Pulse Transforming Line for DWA”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPZ004, pp. 2769-2771.
- K. J. Suthar et al., “Investigation of Various Fabrication Methods to Produce a 180GHz Corrugated Waveguide Structure in 2mm Diameter ?¡0.5m ?¡Long Copper Tube for the Compact Wakefield Accelerator for FEL Facility”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 286-289.
- K. Seiya et al., “Status of Slip Stacking at Fermilab Main Injector”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MOPA004, pp. 347-349.
- Y. C. Nie, M. Jonker, and R. Schmidt, “Beam Related Machine Protection of the Future Circular Collider”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2063-2066.
- S. Rodriguez Esparza et al., “Mechanical Design and Evaluation of the MP-11-like Wire Scanner Prototype”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPR083, pp. 984-986.
- S. Assadi, F. Tecker, and M. J. Yang, “Optics Measurement of the Fermilab Main Injector 8-GeV Transfer Line”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MOP29, pp. 720-722.
- U. Dorda, R. W. Assmann, K. Floettmann, B. Marchetti, Y. C. Nie, and J. Zhu, “Simulation Results of the Beam Transport of Ultra-Short Electron Bunches in Existing Beam Transfer Lines to Sinbad”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1466-1468.
- S. Cao, L. Lai, J. Chen, and Y. Leng, “BAM system and machine stability at SXFEL”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPL177, pp. 4866-4868.
- R. Maier, B. Seligmann, and H. J. Stein, “Electron Cooling in COSY-Juelich”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1580-1583.
- C. Timossi and M. J. Chin, “The Use of FPGAs As A Platform for Distributed Control Systems”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper P1_046.
- V. L. Serov, “Isotope Production for Medical and Technical Use at Moscow Meson Factory Linac”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper MOP61, pp. 213-215.
- V. Anashin et al., “Photodesorption and Power Testing of the SR Crotch-Absorber for BESSY-II”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP06D, pp. 2163-2165.
- S.-W. Kim, “Quench Simulation Program for Superconducting Accelerator Magnets”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH096, pp. 3457-3459.
- A. H. Lumpkin, L. Emery, B. X. Yang, and C. Y. Yao, “X-Ray Imaging of the APS Storage Ring Beam Stability Effects: from the Alaskan Earthquake to Undulator Field Changes”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPB006, pp. 2423-2425.
- E. R. Harms et al., “Experience With LCLS-II Cryomodule Testing at Fermilab”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 1018-1022.
- L. Grisham, S. K. Hahto, S. T. Hahto, J. Kwan, and K. N. Leung, “Proof-of-Concept Experiments for Negative Ion Driver Beams for Heavy Ion Fusion”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper FPAB010, pp. 3309-3311.
- Q. Xia, L. Zheng, and Y. Du, “Experimental design for validating the feasibility of in-situ plasma cleaning of normal conducting copper cavities”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPS66, pp. 3901-3903.
- L. H. Ding, J. Liang, H. Liu, and Z. P. Xie, “Active Magnetic Field Compensation System for SRF Cavities”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 101-103.
- K. Kan et al., “Measurement of Temporal Electric Field of Electron Bunch using Photoconductive Antenna”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1623-1625.
- D. A. Chermoshentsev, A. Feschenko, and S. A. Gavrilov, “Electrodynamic Characteristics of RF-Deflector for Bunch Shape Monitor”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 659-661.
- Z. Insepov, A. Hassanein, and D. Swenson, “Computer Simulation of Surface Modification with Ion Beams”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper TUP51, pp. 363-365.
- A. H. Botha et al., “Modification of the Extraction System of the Pretoria Cyclotron”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper B33, pp. 137-140.
- R. Byrns and M. A. Green, “The ESCAR Helium Refrigeration System”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1168-1172.
- S. A. Gavrilov, A. Feschenko, and P. I. Reinhardt-Nickoulin, “INR RAS Instrumentation for Bunch Shape and Beam Cross-Section Monitoring”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 204-206.
- A. Smirnov, E. Ivanov, A. Pronikov, and S. Kutsaev, “High-voltage pulsed power generator for beam injection systems”, presented at the 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, paper WEP045, unpublished.
- M. J. Yang, “Tevatron Lattice Function Measurement using TBT Data”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP13G, pp. 1647-1652.
- K. W. Struve et al., “Status of Beam Transport with the ETA and ATA Accelerators”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper THP0042, pp. 446-448.
- I. L. Rakhno, A. I. Drozhdin, N. V. Mokhov, V. I. Sidorov, and I. S. Tropin, “Improving the Fermilab Booster Notching Efficiency, Beam Losses and Radiation Levels”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPD083, pp. 562-564.
- B. C. Heisen et al., “Karabo: An Integrated Software Framework Combining Control, Data Management, and Scientific Computing Tasks”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper FRCOAAB02, pp. 1465-1468.
- B. B. Baricevic, A. Kosicek, J. Menart, and M. Znidarcic, “Evaluation of New Generation Heavy Particle Beam Diagnostics Instrumentation”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC123, pp. 1305-1307.
- M. Steinhorst et al., “Low Level RF ERL Experience at the S-DALINAC”, in Proc. 63rd Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'19), Berlin, Germany, Sep. 2019, pp. 52-55.
- A. Moretti and P. F. Schultz, “Operation of Argonne National Laboratory's RF Particle Separator in the Travelling Wave Mode”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1113-1116.
- F.-J. Decker et al., “Effects of Temperature Variation on the SLC Linac RF System”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WPR15, pp. 1821-1823.
- M. Jablonka, B. Aune, and Ch. Magne, “A Scheme for a Fully Superconducting Electron Injector”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 478-481.
- H. V. Walz, R. C. Agostini, L. Barker, R. Cherkassky, T. Constant, and R. Mathieson, “Distributed Supervisory Protection Interlock System”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1928-1931.
- S. A. Gavrilov et al., “Beam Diagnostics and Instrumentation Upgrade for Multipurpose Research Complex of INR RAS”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 667-669.
- G. P. Lawrence, “Critical Design Issues of High Intensity Proton Linacs”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 236-241.
- N. Bongers et al., “First Considerations on Stochastic Cooling in Cosy Juelich”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 511-514.
Back to search