Warning
Please note that we have recently received feedback indicated that atleast one of these reference may have a problem.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] U. Ristau, S. Fiedler, and A. Kolozhvari, “The EMBL Beamline Control Framework BICFROCK”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper WPO012, pp. 60-62.
[n] T. Argyropoulos, T. Bohl, J. Esteban Muller, E. N. Shaposhnikova, H. Timko, and C. M. Bhat, “Thresholds of Longitudinal Single Bunch Instability in Single and Double RF Systems in the CERN SPS”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPR061, pp. 3066-3068.
[n] N. P. Di Monte, W. E. Norum, and C. Yao, “Commissioning of the FPGA-Based Transverse Feedback System at the Advanced Photon Source”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP059, pp. 218-220.
[n] S. Q. Tian, H. H. Li, X. Y. Sun, M. Z. Zhang, and W. Z. Zhang, “A Design Approach of the Beam Optics in the Complex Storage Ring”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEA048, pp. 2597-2599.
[n] Y. Kamiya, A. Araki, M. Katoh, and M. Kihara, “Low Emittance Optics of Photon Factory Storage Ring at KEK”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 455-458.
[n] M. W. McGee, S. K. Chandrasekaran, A. C. Crawford, E. R. Harms, J. R. Leibfritz, and G. Wu, “Cryomdoule Test Stand Reduced-Magnetic Support Design at Fermilab”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2262-2264. doi:10.18429/JACoW-IPAC2016-WEPMR004
[n] S. James et al., “Accelerator Simulation - Beyond High Performance Computing”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPC086, pp. 340-342.
[n] C. Rossi et al., “The Low Level RF System of ELETTRA”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1942-1945.
[n] F. T. Cole, P. V. Livdahl, F. E. Mills, and L. C. Teng, “Loma Linda Medical Accelerator Project”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 737-742.
[n] S. C. Snowdon, “Mechanical and Thermal Stresses in Superconducting Accelerator and Beam-Line Magnets”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1254-1257.
[n] G. Chen et al., “Commissioning of RF System of the 200 MeV Proton Cyclotron”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2877-2879. doi:10.18429/JACoW-IPAC2019-WEPRB030
[n] S. West, M. G. Glover, J. W. Gray, K. Papp, K. Pointner, and L. A. E. Van Lieshout, “The Replacement of the Isis White-circuit Choke”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP136, pp. 3679-3681.
[n] L. P. Chau, M. Droba, N. S. Joshi, O. Meusel, U. Ratzinger, and C. Wiesner, “One Nano-second Bunch Compressor for High Intense Proton Beam”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP091, pp. 3578-3580.
[n] J. Kreutzkamp, L. Hagge, and R. Wichmann, “Distributed Project Management at the European XFEL”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPD030, pp. 1488-1490.
[n] M. Patecki, N. Kramarz, and M. Zieli, “Advancing the feasibility study of the ALICE fixed-target experiment using crystal-assisted halo splitting with HL-LHC lead ion beams”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 346-349. doi:10.18429/JACoW-IPAC2025-MOPM025
[n] J.-F. Ostiguy and L. Michelotti, “Mxyzptlk: An Efficient, Native C++ Differentiation Engine”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAN113, pp. 3489-3491.
[n] B. D. Hartsell, K. Anderson, J. Hylen, V. I. Sidorov, and S. Tariq, “LBNF Hadron Absorber: Mechanical Design and Analysis for 2.4MW Operation”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3318-3320. doi:10.18429/JACoW-IPAC2015-WEPTY025
[n] F. W. Wang and Z. Li, “High Power Tests of the 2-Pin Waveguide Structures”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPFI083, pp. 2890-2892.
[n] D. Y. Shchegolkov, E. I. Simakov, and A. Zholents, “Simulation Studies of BBU Suppression Methods and Acceptable Tolerances in Dielectric Wakefield Accelerators”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2685-2688. doi:10.18429/JACoW-IPAC2015-WEPJE007
[n] D. R. Pearce and J. S. Vincent, “A Facility for Radioisotope Production at TRIUMF with 70-110 MeV Protons”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper V-03, pp. 209-212.
[n] D. W. Storey, R. E. Laxdal, and Z. Y. Yao, “Cryogenic Performance of an SRF Deflecting Cavity Fabricated Using Alternative Techniques for the ARIEL eLinac”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4992-4994. doi:10.18429/JACoW-IPAC2018-THPML132
[n] C. Hovater et al., “Operation of the CEBAF 100 MV Cryomodules”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 65-67. doi:10.18429/JACoW-LINAC2016-MOOP11
[n] H. S. Matis, P. Humphreys, A. Ratti, W. C. Turner, R. Miyamoto, and J. Stiller, “Simulations of the LHC High Luminosity Monitors at Beam Energies 3.5 TeV to 7.0 TeV”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP202, pp. 471-473.
[n] I. Bylinsky et al., “TRIUMF ISAC RF System Improvements after 2 Years of Operational Experience”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAB040, pp. 1285-1287.
[n] C. Moore and H. Jostlein, “A Laser Alignment System for Low Beta Quadrupoles”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 631-634.
[n] A. Arteche et al., “Characterisation of Electro-Optic Pickups for High Bandwidth Diagnostics at the High Luminosity LHC”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2690-2693. doi:10.18429/JACoW-IPAC2019-WEPGW088
[n] C. Meng, X. He, S. Pei, S. C. Wang, O. Xiao, and Z. S. Zhou, “Optimization of Klystron Efficiency with MOGA”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2419-2421. doi:10.18429/JACoW-IPAC2018-WEPMF030
[n] J. Musson, K. E. Cole, and S. M. Rubin, “Application of Goubau Surface Wave Transmission Line for Improved Bench Testing of Diagnostic Beamline Elements”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6REP047, pp. 4060-4062.
[n] P. Burrows et al., “Performance of the FONT3 Fast Analogue Intra-train Beam-based Feedback System at ATF”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPLS123, pp. 852-854.
[n] J. J. Pon, K. S. Lee, M. Mouat, P. J. Yogendran, and B. Davison, “Overview of The Scans" in the Central Control System of TRIUMF's 500 MeV Cyclotron"”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC001, pp. 1090-1093.
[n] M.-S. Chiu et al., “The Commmissioning of Phase-I Insertion Devices in TPS”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3360-3362. doi:10.18429/JACoW-IPAC2016-THPMB050
[n] A. Grassellino, L. D. Cooley, C. M. Ginsburg, A. Romanenko, A. M. Rowe, and V. P. Yakovlev, “High Q0 in Superconducting Niobium Cavities: Progress at FNAL and Future Plans”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPC115, pp. 2492-2494.
[n] Z. Kormany, F. Dworschak, W. Kogler, W. Stellmacher, and A. Valek, “Advanced Beam Diagnostics for a Compact Cyclotron”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1524-1527.
[n] T. M. Huang et al., “The Improvement of the Power Coupler for CADS SC Spoke Cavities”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 220-222. doi:10.18429/JACoW-SRF2017-MOPB070
[n] P. M. Hanlet and C. N. Booth, “Muon Ionization Cooling Experiment: Controls and Monitoring”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPZ024, pp. 856-858.
[n] A. Xiao, T. B. Bolshakov, P. Lebrun, E. S. McCrory, V. Papadimitriou, and A. J. Slaughter, “Tevatron Beam Lifetimes at Injection Using the Shot Data Analysis System”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAT012, pp. 1279-1281.
[n] A. V. Aleksandrov et al., “Status of New 2.5 MeV Test Facility at SNS”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper THPP108, pp. 1105-1107.
[n] M. Valette and P. A. P. Nghiem, “Emittances of the Core and of the Halo”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 99-101. doi:10.18429/JACoW-IPAC2015-MOPWA010
[n] B. L. Bures et al., “X-ray Pole Figure Analysis on Fiber Textured Epitaxial Niobium Films for SRF Cavities”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper TUPPO080, pp. 418-421.
[n] G. Doucas, M. Kimmitt, J. H. Mulvey, M. Omori, and J. Walsh, “First Observation of Smith-Purcell Radiation from Relativistic Electrons”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 632-635.
[n] P. Kolb, Y. Gao, D. Holmes, K. S. Smith, and W. Xu, “Concepts and Design for Beamline HOM Dampers for eRHIC”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 39-42. doi:10.18429/JACoW-SRF2017-MOPB001
[n] S. Biedron, J. W. Lewellen, and M. Virgo, “High-Average, High-Peak Current Injector Design”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper THPP057, pp. XX-XX.
[n] T. Tajima et al., “Status of the LANL Activities in the Field of RF Superconductivity”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper MOP11, pp. 57-59.
[n] P. Naisson et al., “State of the Art of Niobium Machining for SRF Applications”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 210-213. doi:10.18429/JACoW-SRF2019-MOP061
[n] S. Petitdemange, L. Claustre, A. Homs, R. Homs Regojo, and E. Papillon, “The LIMA Project Update”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper FRCOAAB08, pp. 1489-1492.
[n] F. Lemery et al., “Performances of VORPAL-GPU Slab-symmetric DLW”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPEA073, pp. 1298-1300.
[n] K. L. Erdman, “Special Aspects of Cyclotron RF-systems (Invited paper)”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper C-01, pp. 141-145.
[n] F. Lenkszus et al., “Timing and Synchronization for the APS Short Pulse X-ray Project”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUOAB01, pp. 1077-1079.
[n] A. Caruette, M. Fouaidy, T. Junquera, J. C. Le Scornet, and Q. S. Shu, “Analysis of Thermal Effects in TESLA SRF Cavities using Surface Scanning Thermometers”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP043L, pp. 2112-2114.
[n] B. T. Fishler et al., “Sustaining the National Ignition Facility (NIF) Integrated Computer Control System (ICCS) over its Thirty Year Lifespan”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1201-1205. doi:10.18429/JACoW-ICALEPCS2017-THCPL06
[n] E. E. Wisniewski et al., “Schottky-Enabled Photoemission and Dark Current Measurements - Toward an Alternate Approach to Fowler-Nordheim Plot Analysis”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPD069, pp. 1563-1565.
[n] S. J. Werkema, “Record Luminosities at the Tevatron amp; Future Potentiality”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper TUXMA02, pp. 51-55.
[n] Z. S. Zhou et al., “CEPC 650 MHz Klystron Development”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3891-3894. doi:10.18429/JACoW-IPAC2016-THPOR046
[n] M. Q. Barton, “Heavy Ion Collisions in a Collider at BNL”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2020-2022.
[n] Y. Chung, D. Barr, G. Decker, K. Evans Jr., and E. Kahana, “Sensitivity and Offset Calibration for the Beam Position Monitors at the Advanced Photon Source”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPQ03, pp. 2452-2454.
[n] P. Burrows et al., “Design of the ILC Prototype FONT4 Digital Intra-train Beam-based Feedback System”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPLS122, pp. 849-851.
[n] M. B. Shrader and D. H. Preist, “Compact High Efficiency, Lightweight 200-800 MHz High Power RF Source”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2751-2754.
[n] W. D. Klotz and C. Herve, “The Conceptual Design of the ESRF Control System”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1196-1199.
[n] H. G. Khodzhibagiyan et al., “Prototype Superconducting Magnets for the NICA Accelerator Complex”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPME028, pp. 3567-3569.
[n] R. Maldonado, “Overview of X-Ray Lithography at IBM Using a Compact Storage Ring”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 542-547.
For LaTeX
Use Complete Form
For BibTeX
References
- U. Ristau, S. Fiedler, and A. Kolozhvari, “The EMBL Beamline Control Framework BICFROCK”, in Proc. 10th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'14), Karlsruhe, Germany, Oct. 2014, paper WPO012, pp. 60-62.
- T. Argyropoulos, T. Bohl, J. Esteban Muller, E. N. Shaposhnikova, H. Timko, and C. M. Bhat, “Thresholds of Longitudinal Single Bunch Instability in Single and Double RF Systems in the CERN SPS”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPR061, pp. 3066-3068.
- N. P. Di Monte, W. E. Norum, and C. Yao, “Commissioning of the FPGA-Based Transverse Feedback System at the Advanced Photon Source”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper TUP059, pp. 218-220.
- S. Q. Tian, H. H. Li, X. Y. Sun, M. Z. Zhang, and W. Z. Zhang, “A Design Approach of the Beam Optics in the Complex Storage Ring”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEA048, pp. 2597-2599.
- Y. Kamiya, A. Araki, M. Katoh, and M. Kihara, “Low Emittance Optics of Photon Factory Storage Ring at KEK”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 455-458.
- M. W. McGee, S. K. Chandrasekaran, A. C. Crawford, E. R. Harms, J. R. Leibfritz, and G. Wu, “Cryomdoule Test Stand Reduced-Magnetic Support Design at Fermilab”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2262-2264.
- S. James et al., “Accelerator Simulation - Beyond High Performance Computing”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPC086, pp. 340-342.
- C. Rossi et al., “The Low Level RF System of ELETTRA”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1942-1945.
- F. T. Cole, P. V. Livdahl, F. E. Mills, and L. C. Teng, “Loma Linda Medical Accelerator Project”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 737-742.
- S. C. Snowdon, “Mechanical and Thermal Stresses in Superconducting Accelerator and Beam-Line Magnets”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1254-1257.
- G. Chen et al., “Commissioning of RF System of the 200 MeV Proton Cyclotron”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2877-2879.
- S. West, M. G. Glover, J. W. Gray, K. Papp, K. Pointner, and L. A. E. Van Lieshout, “The Replacement of the Isis White-circuit Choke”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPP136, pp. 3679-3681.
- L. P. Chau, M. Droba, N. S. Joshi, O. Meusel, U. Ratzinger, and C. Wiesner, “One Nano-second Bunch Compressor for High Intense Proton Beam”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPP091, pp. 3578-3580.
- J. Kreutzkamp, L. Hagge, and R. Wichmann, “Distributed Project Management at the European XFEL”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPD030, pp. 1488-1490.
- M. Patecki, N. Kramarz, and M. Zieli, “Advancing the feasibility study of the ALICE fixed-target experiment using crystal-assisted halo splitting with HL-LHC lead ion beams”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPM025, pp. 346-349.
- J.-F. Ostiguy and L. Michelotti, “Mxyzptlk: An Efficient, Native C++ Differentiation Engine”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPAN113, pp. 3489-3491.
- B. D. Hartsell, K. Anderson, J. Hylen, V. I. Sidorov, and S. Tariq, “LBNF Hadron Absorber: Mechanical Design and Analysis for 2.4MW Operation”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3318-3320.
- F. W. Wang and Z. Li, “High Power Tests of the 2-Pin Waveguide Structures”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPFI083, pp. 2890-2892.
- D. Y. Shchegolkov, E. I. Simakov, and A. Zholents, “Simulation Studies of BBU Suppression Methods and Acceptable Tolerances in Dielectric Wakefield Accelerators”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2685-2688.
- D. R. Pearce and J. S. Vincent, “A Facility for Radioisotope Production at TRIUMF with 70-110 MeV Protons”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper V-03, pp. 209-212.
- D. W. Storey, R. E. Laxdal, and Z. Y. Yao, “Cryogenic Performance of an SRF Deflecting Cavity Fabricated Using Alternative Techniques for the ARIEL eLinac”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4992-4994.
- C. Hovater et al., “Operation of the CEBAF 100 MV Cryomodules”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 65-67.
- H. S. Matis, P. Humphreys, A. Ratti, W. C. Turner, R. Miyamoto, and J. Stiller, “Simulations of the LHC High Luminosity Monitors at Beam Energies 3.5 TeV to 7.0 TeV”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP202, pp. 471-473.
- I. Bylinsky et al., “TRIUMF ISAC RF System Improvements after 2 Years of Operational Experience”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAB040, pp. 1285-1287.
- C. Moore and H. Jostlein, “A Laser Alignment System for Low Beta Quadrupoles”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 631-634.
- A. Arteche et al., “Characterisation of Electro-Optic Pickups for High Bandwidth Diagnostics at the High Luminosity LHC”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2690-2693.
- C. Meng, X. He, S. Pei, S. C. Wang, O. Xiao, and Z. S. Zhou, “Optimization of Klystron Efficiency with MOGA”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2419-2421.
- J. Musson, K. E. Cole, and S. M. Rubin, “Application of Goubau Surface Wave Transmission Line for Improved Bench Testing of Diagnostic Beamline Elements”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6REP047, pp. 4060-4062.
- P. Burrows et al., “Performance of the FONT3 Fast Analogue Intra-train Beam-based Feedback System at ATF”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPLS123, pp. 852-854.
- J. J. Pon, K. S. Lee, M. Mouat, P. J. Yogendran, and B. Davison, “Overview of The Scans" in the Central Control System of TRIUMF's 500 MeV Cyclotron"”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THPPC001, pp. 1090-1093.
- M.-S. Chiu et al., “The Commmissioning of Phase-I Insertion Devices in TPS”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3360-3362.
- A. Grassellino, L. D. Cooley, C. M. Ginsburg, A. Romanenko, A. M. Rowe, and V. P. Yakovlev, “High Q0 in Superconducting Niobium Cavities: Progress at FNAL and Future Plans”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPC115, pp. 2492-2494.
- Z. Kormany, F. Dworschak, W. Kogler, W. Stellmacher, and A. Valek, “Advanced Beam Diagnostics for a Compact Cyclotron”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1524-1527.
- T. M. Huang et al., “The Improvement of the Power Coupler for CADS SC Spoke Cavities”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 220-222.
- P. M. Hanlet and C. N. Booth, “Muon Ionization Cooling Experiment: Controls and Monitoring”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPZ024, pp. 856-858.
- A. Xiao, T. B. Bolshakov, P. Lebrun, E. S. McCrory, V. Papadimitriou, and A. J. Slaughter, “Tevatron Beam Lifetimes at Injection Using the Shot Data Analysis System”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper FPAT012, pp. 1279-1281.
- A. V. Aleksandrov et al., “Status of New 2.5 MeV Test Facility at SNS”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper THPP108, pp. 1105-1107.
- M. Valette and P. A. P. Nghiem, “Emittances of the Core and of the Halo”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 99-101.
- B. L. Bures et al., “X-ray Pole Figure Analysis on Fiber Textured Epitaxial Niobium Films for SRF Cavities”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper TUPPO080, pp. 418-421.
- G. Doucas, M. Kimmitt, J. H. Mulvey, M. Omori, and J. Walsh, “First Observation of Smith-Purcell Radiation from Relativistic Electrons”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 632-635.
- P. Kolb, Y. Gao, D. Holmes, K. S. Smith, and W. Xu, “Concepts and Design for Beamline HOM Dampers for eRHIC”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 39-42.
- S. Biedron, J. W. Lewellen, and M. Virgo, “High-Average, High-Peak Current Injector Design”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper THPP057, pp. XX-XX.
- T. Tajima et al., “Status of the LANL Activities in the Field of RF Superconductivity”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper MOP11, pp. 57-59.
- P. Naisson et al., “State of the Art of Niobium Machining for SRF Applications”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 210-213.
- S. Petitdemange, L. Claustre, A. Homs, R. Homs Regojo, and E. Papillon, “The LIMA Project Update”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper FRCOAAB08, pp. 1489-1492.
- F. Lemery et al., “Performances of VORPAL-GPU Slab-symmetric DLW”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPEA073, pp. 1298-1300.
- K. L. Erdman, “Special Aspects of Cyclotron RF-systems (Invited paper)”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper C-01, pp. 141-145.
- F. Lenkszus et al., “Timing and Synchronization for the APS Short Pulse X-ray Project”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUOAB01, pp. 1077-1079.
- A. Caruette, M. Fouaidy, T. Junquera, J. C. Le Scornet, and Q. S. Shu, “Analysis of Thermal Effects in TESLA SRF Cavities using Surface Scanning Thermometers”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP043L, pp. 2112-2114.
- B. T. Fishler et al., “Sustaining the National Ignition Facility (NIF) Integrated Computer Control System (ICCS) over its Thirty Year Lifespan”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1201-1205.
- E. E. Wisniewski et al., “Schottky-Enabled Photoemission and Dark Current Measurements - Toward an Alternate Approach to Fowler-Nordheim Plot Analysis”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPD069, pp. 1563-1565.
- S. J. Werkema, “Record Luminosities at the Tevatron amp; Future Potentiality”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper TUXMA02, pp. 51-55.
- Z. S. Zhou et al., “CEPC 650 MHz Klystron Development”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3891-3894.
- M. Q. Barton, “Heavy Ion Collisions in a Collider at BNL”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2020-2022.
- Y. Chung, D. Barr, G. Decker, K. Evans Jr., and E. Kahana, “Sensitivity and Offset Calibration for the Beam Position Monitors at the Advanced Photon Source”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPQ03, pp. 2452-2454.
- P. Burrows et al., “Design of the ILC Prototype FONT4 Digital Intra-train Beam-based Feedback System”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPLS122, pp. 849-851.
- M. B. Shrader and D. H. Preist, “Compact High Efficiency, Lightweight 200-800 MHz High Power RF Source”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2751-2754.
- W. D. Klotz and C. Herve, “The Conceptual Design of the ESRF Control System”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1196-1199.
- H. G. Khodzhibagiyan et al., “Prototype Superconducting Magnets for the NICA Accelerator Complex”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPME028, pp. 3567-3569.
- R. Maldonado, “Overview of X-Ray Lithography at IBM Using a Compact Storage Ring”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 542-547.
Back to search