Warning
Please note that we have recently received feedback indicated that atleast one of these reference may have a problem.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. Kwiatkowski, M. Alsdorf, B. Dehning, W. Vigano, and C. Zamantzas, “A Gigabit Ethernet Link for an FPGA Based Beam Loss Measurement System”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper MOPC44, pp. 178-181.
[n] F. Becheri et al., “A tango based control system for a 3D measurement bench for magnets”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P1_054.
[n] V. A. Verzilov et al., “Status of Beam Diagnostic Systems for TRIUMF Electron Linac”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper TUPC06, pp. 361-364.
[n] T. Slaton, G. Mazaheri, and T. Shintake, “Development of Nanometer Resolution C-Band Radio Frequency Beam Position Monitors in the Final Focus Test Beam”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TH4064, pp. 911-913.
[n] J. McCarrick et al., “Electron Beam/Converter Target Interactions in Radiographic Accelerators”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper ROAC009, pp. 563-567.
[n] T. S. Ueng, K. T. Hsu, C. S. Fang, Y. M. Chang, and K. K. Lin, “Turn-by-Turn Beam Position Measurement for 1.3 GeV Booster Synchrotron”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPQ32, pp. 2524-2526.
[n] B. D. Hartsell, M. R. Campbell, P. Hurh, M. D. Fitton, T. Ishida, and T. Nakadaira, “Design of a Compact Fatigue Tester for Testing Irradiated Materials”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3321-3323. doi:10.18429/JACoW-IPAC2015-WEPTY026
[n] L. Bojtar, “Antiproton Decelerator Status Report”, in Proc. COOL'09, Lanzhou, China, Aug.-Sep. 2009, paper MOM1MCIO02, pp. XX-XX.
[n] Y. Chung et al., “Closed Orbit Feedback with Digital Signal Processing”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1592-1595.
[n] C. Jamet, W. LC. Le Coz, G. Ledu, S. Loret, and C. Potier de courcy, “Energy and Longitudinal Bunch Measurements at the SPIRAL2 RFQ Exit”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 723-727. doi:10.18429/JACoW-IBIC2016-WEPG42
[n] C. Y. Liu, Y.-C. Chien, K.-B. Liu, B. S. Wang, and Y. S. Wong, “Dipole Power Supply for the Storage Ring of Taiwan Photon Source”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3573-3575. doi:10.18429/JACoW-IPAC2016-THPMW016
[n] C. Baumgarten, “Beam Based Calibration Measurements at the PSI Cyclotron Facility”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 342-344. doi:10.18429/JACoW-Cyclotrons2016-THP16
[n] B. S. Wang, Y.-C. Chien, C.-Y. Liu, K.-B. Liu, and H. P. Tsai, “The Multi-channel Measuring Data Acquisition Interface for TPS Quadrupole and Sextupole Magnet Power Supplies by using LabVIEW as the Developing Tool”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWA046, pp. 774-776.
[n] J. Ma et al., “Reducing background/noise in stretched wire alignment technique measurements”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3345-3347. doi:10.18429/JACoW-IPAC2024-THPG38
[n] W. LC. Le Coz et al., “Progress on the Beam Energy Monitor for the SPIRAL2 Accelerator.”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper WEPF29, pp. 617-619.
[n] A. Lumpkin and B. Yang, “Status of the Synchrotron Radiation Monitors for the APS Facility Rings”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPQ09, pp. 2470-2472.
[n] S. H. Kim et al., “Development of L-band Electron Accelerator for Irradiation Source”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THPMA127, pp. 821-823.
[n] R. L. Gluckstern, “Feasibility Study of a Meson Linear Accelerator”, in Proc. LINAC'62, Long Island, NY, USA, Aug. 1962, paper B-07, pp. 124-127.
[n] T. Eriksson et al., “Upgrades and Consolidation of the CERN AD for Operation during the Next Decades”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPEA063, pp. 2654-2656.
[n] J. Rodnizki, B. Bazak, D. Berkovits, G. Feinberg, A. Shor, and Y. Yanay, “Lattice Beam Dynamics Study at Low for SARAF/EURISOL Driver 40/60 MeV 4 mA d& Superconducting Linac”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper WGB15, pp. 246-253.
[n] M. Peiniger, G. Mueller, H. Piel, and P. Thuens, “Nb3Sn for Superconducting Accelerators at 4.2 K”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1295-1298.
[n] R. Huhmann, G. Froehlich, S. J??licher, and V. RW. Schaa, “GSI Operation Software: Migration from OpenVMS to Linux”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMS014, pp. 351-353.
[n] J. A. Mitchell et al., “LHC Crab Cavity Coupler Test Boxes”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2248-2250. doi:10.18429/JACoW-IPAC2016-WEPMB058
For LaTeX
Use Complete Form
For BibTeX
References
- M. Kwiatkowski, M. Alsdorf, B. Dehning, W. Vigano, and C. Zamantzas, “A Gigabit Ethernet Link for an FPGA Based Beam Loss Measurement System”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper MOPC44, pp. 178-181.
- F. Becheri et al., “A tango based control system for a 3D measurement bench for magnets”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper P1_054.
- V. A. Verzilov et al., “Status of Beam Diagnostic Systems for TRIUMF Electron Linac”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper TUPC06, pp. 361-364.
- T. Slaton, G. Mazaheri, and T. Shintake, “Development of Nanometer Resolution C-Band Radio Frequency Beam Position Monitors in the Final Focus Test Beam”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TH4064, pp. 911-913.
- J. McCarrick et al., “Electron Beam/Converter Target Interactions in Radiographic Accelerators”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper ROAC009, pp. 563-567.
- T. S. Ueng, K. T. Hsu, C. S. Fang, Y. M. Chang, and K. K. Lin, “Turn-by-Turn Beam Position Measurement for 1.3 GeV Booster Synchrotron”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPQ32, pp. 2524-2526.
- B. D. Hartsell, M. R. Campbell, P. Hurh, M. D. Fitton, T. Ishida, and T. Nakadaira, “Design of a Compact Fatigue Tester for Testing Irradiated Materials”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3321-3323.
- L. Bojtar, “Antiproton Decelerator Status Report”, in Proc. 7th Workshop on Beam Cooling and Related Topics (COOL'09), Lanzhou, China, Aug.-Sep. 2009, paper MOM1MCIO02, pp. XX-XX.
- Y. Chung et al., “Closed Orbit Feedback with Digital Signal Processing”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1592-1595.
- C. Jamet, W. LC. Le Coz, G. Ledu, S. Loret, and C. Potier de courcy, “Energy and Longitudinal Bunch Measurements at the SPIRAL2 RFQ Exit”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 723-727.
- C. Y. Liu, Y.-C. Chien, K.-B. Liu, B. S. Wang, and Y. S. Wong, “Dipole Power Supply for the Storage Ring of Taiwan Photon Source”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3573-3575.
- C. Baumgarten, “Beam Based Calibration Measurements at the PSI Cyclotron Facility”, in Proc. 21th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'16), Zurich, Switzerland, Sep. 2016, pp. 342-344.
- B. S. Wang, Y.-C. Chien, C.-Y. Liu, K.-B. Liu, and H. P. Tsai, “The Multi-channel Measuring Data Acquisition Interface for TPS Quadrupole and Sextupole Magnet Power Supplies by using LabVIEW as the Developing Tool”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPWA046, pp. 774-776.
- J. Ma et al., “Reducing background/noise in stretched wire alignment technique measurements”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPG38, pp. 3345-3347.
- W. LC. Le Coz et al., “Progress on the Beam Energy Monitor for the SPIRAL2 Accelerator.”, in Proc. 3rd Int. Beam Instrumentation Conf. (IBIC'14), Monterey, CA, USA, Sep. 2014, paper WEPF29, pp. 617-619.
- A. Lumpkin and B. Yang, “Status of the Synchrotron Radiation Monitors for the APS Facility Rings”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPQ09, pp. 2470-2472.
- S. H. Kim et al., “Development of L-band Electron Accelerator for Irradiation Source”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper THPMA127, pp. 821-823.
- R. L. Gluckstern, “Feasibility Study of a Meson Linear Accelerator”, in Proc. 1962 Conf. on Linear Accelerators for High Energies (LINAC'62), Long Island, NY, USA, Aug. 1962, paper B-07, pp. 124-127.
- T. Eriksson et al., “Upgrades and Consolidation of the CERN AD for Operation during the Next Decades”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPEA063, pp. 2654-2656.
- J. Rodnizki, B. Bazak, D. Berkovits, G. Feinberg, A. Shor, and Y. Yanay, “Lattice Beam Dynamics Study at Low for SARAF/EURISOL Driver 40/60 MeV 4 mA d& Superconducting Linac”, in Proc. 42nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'08), Nashville, TN, USA, Aug. 2008, paper WGB15, pp. 246-253.
- M. Peiniger, G. Mueller, H. Piel, and P. Thuens, “Nb3Sn for Superconducting Accelerators at 4.2 K”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1295-1298.
- R. Huhmann, G. Froehlich, S. J??licher, and V. RW. Schaa, “GSI Operation Software: Migration from OpenVMS to Linux”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPMS014, pp. 351-353.
- J. A. Mitchell et al., “LHC Crab Cavity Coupler Test Boxes”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2248-2250.
Back to search
