Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] R. Klatt, R. D. Kohaupt, and T. Weiland, “Theoretical Prediction of Head-Tail Tune Shift in PETRA”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2356-2359.
[n] R. B. Miller, “RADLAC Technology Review”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3149-3154.
[n] P. Sievers, R. Bellone, D. Fiander, J. Hangst, and G. Silvestrov, “Performance and Operational Experience with CERN-Lithium Lenses”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1401-1404.
[n] M. Kuntzsch, S. J. Burger, R. Schurig, and T. Weber, “Long Term Investigation of the Degradation of Coaxial Cables”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 552-555. doi:10.18429/JACoW-IBIC2018-THOB03
[n] T. Shrey et al., “RHIC Au-Au operation at 100 GeV in Run 23”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 48-50. doi:10.18429/JACoW-IPAC2024-MOPC07
[n] D. Li, S. Y. Lee, J. Budnick, and T. Hall, “Design and Fabrication of a Multi-Purpose Panofsky Magnet”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2865-2868.
[n] J. Bosser et al., “Operational Aspects of Electron Cooling at the Low Energy Antiproton Ring (LEAR)”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2832-2835.
[n] K. Dunkel, C. Piel, and H. Vogel, “100 MeV Pre-Injector for 3rd Generation Synchrotron Light Sources”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper TUP14017, pp. XX-XX.
[n] J. K. Bair et al., “Design Considerations for the ORNL 25 MV Tandem Accelerator”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1655-1659.
[n] D. T. Dowling et al., “Status of the Radioactive Ion Beam Injector at the Holifield Radioactive Ion Beam Facility”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAQ26, pp. 1897-1899.
[n] W. T. Milner et al., “Transport of DC and Bunched Beams Through a 25 mV Folded Tandem Accelerator”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1697-1702.
[n] G. Goin, J. Vernois, C. Cimeti?¿re, and J. L?®ger, “Iodine-123 Production by Irradiation at the CNRS Cyclotron in Orleans”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper GP-03, pp. 697-698.
[n] I. Pinayev et al., “First Results of the SRF Gun Test for CeC PoP Experiment”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 564-566. doi:10.18429/JACoW-FEL2015-TUD03
[n] A. Hutton and M. S. Zisman, “PEP-II: An Asymmetric B Factory Based on PEP”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 84-87.
[n] H. Kumpfert, “Recent Progress in the Performance of the Desy-Electron Synchrotron”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 231-236.
[n] R. J. Roussel et al., “Transformer Ratio Measurements from Ramped Beams in the Plasma Blowout Regime using Emittance Exchange”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3778-3781. doi:10.18429/JACoW-IPAC2019-THPGW088
[n] Q. Gu, Q. G. Zhou, Z. M. Dai, D. M. Li, and Z. T. Zhao, “Design of an Intense THz Light Source Based on Femto-Second Electron Bunches”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper TUP11008, pp. XX-XX.
[n] J. Briaud, “Fast Closing Vacuum Valve Control for Cyclotron Protection”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper EP-43, pp. 541-541.
[n] P. Suominen, T. Stora, J. Medard, and P. Sortais, “Ionization Efficiency of a COMIC Ion Source Equipped With a Quartz Plasma Chamber”, in Proc. ECRIS'10, Grenoble, France, Aug. 2010, paper MOPOT006, pp. 51-53.
[n] I. Pinayev, D. Kayran, and V. Litvinenko, “Formation of the Electron Bunch Longitudinal Profile for Coherent Electron Cooling Experiment”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper THP048, pp. 840-842.
[n] F.-J. Decker et al., “Two Bunches with ns-Separation with LCLS”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 634-638. doi:10.18429/JACoW-FEL2015-WEP023
[n] T. Winkelmann, R. Cee, Th. Haberer, B. Naas, and A. Peters, “Long-Term Operation Experience With Two ECR Ion Sources and Planned Extensions at HIT”, in Proc. ECRIS'10, Grenoble, France, Aug. 2010, paper TUPOT016, pp. 153-155.
[n] R. Connolly, P. Cameron, W. Ryan, T. J. Shea, R. Sikora, and N. Tsoupas, “A Prototype Ionization Profile Monitor for RHIC”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5P047, pp. 2152-2154.
[n] R. Bellone et al., “Beam Tests of a 36 mm Lithium Lens”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1303-1306.
[n] H. X. Deng and Z. M. Dai, “Three Dimensional Simulations on Harmonic Operation of Shanghai Deep Ultraviolet Free Electron Laser”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper MOPPH032, pp. 55-58.
[n] Z. B. du Toit, S. J. Burger, P. J. Celliers, G. S. Z. Guasco, L. Roels, and H. A. Smit, “Aspects of the Design of an 8 MeV Cyclotron as Injector for a 200 MeV Separated-Sector Cyclotron”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper ABP-09, pp. 129-131.
[n] A. I. Pikin et al., “Tandem EBIS”, in Proc. HIAT'12, Chicago, IL, USA, Jun. 2012, paper PO18, pp. 101-104.
[n] R. Coisson, “Insertion Devices for the Production of Electromagnetic Radiation”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 291-295.
[n] J. D. Bailey, D. T. Dowling, S. N. Lane, S. W. Mosko, D. K. Olsen, and B. A. Tatum, “ORIC Central Region Calculations”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAP07, pp. 366-368.
For LaTeX
Use Complete Form
For BibTeX
References
- R. Klatt, R. D. Kohaupt, and T. Weiland, “Theoretical Prediction of Head-Tail Tune Shift in PETRA”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2356-2359.
- R. B. Miller, “RADLAC Technology Review”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3149-3154.
- P. Sievers, R. Bellone, D. Fiander, J. Hangst, and G. Silvestrov, “Performance and Operational Experience with CERN-Lithium Lenses”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1401-1404.
- M. Kuntzsch, S. J. Burger, R. Schurig, and T. Weber, “Long Term Investigation of the Degradation of Coaxial Cables”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 552-555.
- T. Shrey et al., “RHIC Au-Au operation at 100 GeV in Run 23”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPC07, pp. 48-50.
- D. Li, S. Y. Lee, J. Budnick, and T. Hall, “Design and Fabrication of a Multi-Purpose Panofsky Magnet”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2865-2868.
- J. Bosser et al., “Operational Aspects of Electron Cooling at the Low Energy Antiproton Ring (LEAR)”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2832-2835.
- K. Dunkel, C. Piel, and H. Vogel, “100 MeV Pre-Injector for 3rd Generation Synchrotron Light Sources”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper TUP14017, pp. XX-XX.
- J. K. Bair et al., “Design Considerations for the ORNL 25 MV Tandem Accelerator”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1655-1659.
- D. T. Dowling et al., “Status of the Radioactive Ion Beam Injector at the Holifield Radioactive Ion Beam Facility”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WAQ26, pp. 1897-1899.
- W. T. Milner et al., “Transport of DC and Bunched Beams Through a 25 mV Folded Tandem Accelerator”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1697-1702.
- G. Goin, J. Vernois, C. Cimeti?¿re, and J. L?®ger, “Iodine-123 Production by Irradiation at the CNRS Cyclotron in Orleans”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper GP-03, pp. 697-698.
- I. Pinayev et al., “First Results of the SRF Gun Test for CeC PoP Experiment”, in Proc. 37th Int. Free Electron Laser Conf. (FEL'15), Daejeon, Korea, Aug. 2015, pp. 564-566.
- A. Hutton and M. S. Zisman, “PEP-II: An Asymmetric B Factory Based on PEP”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 84-87.
- H. Kumpfert, “Recent Progress in the Performance of the Desy-Electron Synchrotron”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 231-236.
- R. J. Roussel et al., “Transformer Ratio Measurements from Ramped Beams in the Plasma Blowout Regime using Emittance Exchange”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3778-3781.
- Q. Gu, Q. G. Zhou, Z. M. Dai, D. M. Li, and Z. T. Zhao, “Design of an Intense THz Light Source Based on Femto-Second Electron Bunches”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper TUP11008, pp. XX-XX.
- J. Briaud, “Fast Closing Vacuum Valve Control for Cyclotron Protection”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper EP-43, pp. 541-541.
- P. Suominen, T. Stora, J. Medard, and P. Sortais, “Ionization Efficiency of a COMIC Ion Source Equipped With a Quartz Plasma Chamber”, in Proc. 19th Int. Workshop on ECR Ion Sources (ECRIS'10), Grenoble, France, Aug. 2010, paper MOPOT006, pp. 51-53.
- I. Pinayev, D. Kayran, and V. Litvinenko, “Formation of the Electron Bunch Longitudinal Profile for Coherent Electron Cooling Experiment”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper THP048, pp. 840-842.
- F.-J. Decker et al., “Two Bunches with ns-Separation with LCLS”, in Proc. 37th Int. Free Electron Laser Conf. (FEL'15), Daejeon, Korea, Aug. 2015, pp. 634-638.
- T. Winkelmann, R. Cee, Th. Haberer, B. Naas, and A. Peters, “Long-Term Operation Experience With Two ECR Ion Sources and Planned Extensions at HIT”, in Proc. 19th Int. Workshop on ECR Ion Sources (ECRIS'10), Grenoble, France, Aug. 2010, paper TUPOT016, pp. 153-155.
- R. Connolly, P. Cameron, W. Ryan, T. J. Shea, R. Sikora, and N. Tsoupas, “A Prototype Ionization Profile Monitor for RHIC”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 5P047, pp. 2152-2154.
- R. Bellone et al., “Beam Tests of a 36 mm Lithium Lens”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1303-1306.
- H. X. Deng and Z. M. Dai, “Three Dimensional Simulations on Harmonic Operation of Shanghai Deep Ultraviolet Free Electron Laser”, in Proc. 30th Int. Free Electron Laser Conf. (FEL'08), Gyeongju, Korea, Aug. 2008, paper MOPPH032, pp. 55-58.
- Z. B. du Toit, S. J. Burger, P. J. Celliers, G. S. Z. Guasco, L. Roels, and H. A. Smit, “Aspects of the Design of an 8 MeV Cyclotron as Injector for a 200 MeV Separated-Sector Cyclotron”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper ABP-09, pp. 129-131.
- A. I. Pikin et al., “Tandem EBIS”, in Proc. 12th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'12), Chicago, IL, USA, Jun. 2012, paper PO18, pp. 101-104.
- R. Coisson, “Insertion Devices for the Production of Electromagnetic Radiation”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 291-295.
- J. D. Bailey, D. T. Dowling, S. N. Lane, S. W. Mosko, D. K. Olsen, and B. A. Tatum, “ORIC Central Region Calculations”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAP07, pp. 366-368.
Back to search