Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. T. Seeman et al., “Alignment Issues of the SLC Linac Accelerating Structure”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2949-2952.
[n] M. Nagaenko and I. Pavletsov, “Simulation of Beam Optics and Beam-Degrader Interaction for COMBAS Fragment-Separator”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1394-1397.
[n] N. Gonzalez, C. Colldelram, C. Escudero, and S. Ferrer, “High Frequency UHV Mechanical X-Ray Beam Chopper”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 339-341. doi:10.18429/JACoW-MEDSI2016-WEPE15
[n] D. H. Bilderback, “Energy Recovery Linac Experimental Challenges”, in Proc. FLS'06, Hamburg, Germany, May 2006, paper PLT03, pp. XX-XX.
[n] J. B. Murphy et al., “The Brookhaven Superconducting X-Ray Lithography Source (SXLS)”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1828-1831.
[n] R. Rujanakraikarn, Ch. Dhammatong, and W. Phacheerak, “Design and Implementation of Stepper Motor Control of the LINAC High Power RF System Based on FPGA”, in Proc. PCaPAC'18, Hsinchu City, Taiwan, Oct. 2018, pp. 179-182. doi:10.18429/JACoW-PCaPAC2018-THP08
[n] R. De Prisco, A. R. Karlsson, M. Eshraqi, Y. I. Levinsen, and R. Miyamoto, “Integration of Interfaces and Stabilization System in the Design of a Drift Tube Linac”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 294-297. doi:10.18429/JACoW-LINAC2016-MOPLR070
[n] R. Kowalewicz et al., “Performance of the CERN Plasma Lens in Laboratory and Beam Tests at the Antiproton Source”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2631-2634.
[n] C. Peters et al., “Design and Performance of 40mm, 6.5 T, Collared, Cold-Iron Model Magnets”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3728-3731.
[n] J. Holmes, S. Cousineau, V. Danilov, A. Fedotov, S. Henderson, and A. Shishlo, “Computational Studies of Collective Beam Dynamics in High Intensity Rings”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TOAA005, pp. 117-119.
[n] A. E. Vlieks et al., “Development of An X-Band Photoinjector at SLAC”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper MO453, pp. 163-165.
[n] P. Arnold, J. Fydrych, W. Hees, J. M. Jurns, X. Wang, and J. G. Weisend, “The Accelerator Cryoplant at ESS”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper THPP041, pp. 939-941.
[n] E. Karantzoulis and A. Wrulich, “Multibunch Instability Investigation for the ELETTRA Cavities”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1618-1621.
[n] M. Sommer, M. H?Âner, B. D. Isbarn, S. Khan, B. Riemann, and T. Weis, “Coupled-Bunch Instability Suppression Using RF Phase Modulation at the DELTA Storage Ring”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 179-182. doi:10.18429/JACoW-IPAC2015-MOPWA034
[n] R. M. Jones and N. Juntong, “High-Gradient SRF Cavity with Minimized Surface E.M. Fields and Superior Bandwidth for the ILC”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THPPO024, pp. 594-598.
[n] Z. A. Conway et al., “Cryomodule Designs for Superconducting Half-Wave Resonators”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper TUPB068, pp. 627-629.
[n] D. Anicic, “Quest for the New Standard PSI IOC Platform”, in Proc. PCaPAC'18, Hsinchu City, Taiwan, Oct. 2018, pp. 119-123. doi:10.18429/JACoW-PCaPAC2018-THCA1
[n] P. G. Barnes et al., “A Micro-Channel Plate Based Gas Ionization Profile Monitor with Shaping Field Electrodes for the ISIS H- Injector”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC147, pp. 1371-1373.
[n] S. A. Whitehead, P. G. Barnes, G. M. Cross, S. J. Payne, and A. Pertica, “Multi-Channeltron Based Profile Monitor at the ISIS Proton Synchrotron”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper TUPSM007, pp. 106-110.
[n] A. Kitagawa, T. F. Fujita, and M. Muramatsu, “Present Status and Future Prospect of Heavy Ion Radiotherapy”, in Proc. ECRIS'18, Catania, Italy, Sep. 2018, pp. 49-52. doi:10.18429/JACoW-ECRIS2018-TUA2
[n] A. Wrulich, “ELETTRA Status Report”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 57-62.
[n] J. A. van der Heide, P. Magendans, J. L. J. de Regt, and W. J. Kleeven, “The Eindhoven Minicyclotron ILEC”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper D-10, pp. 121-124.
[n] Y. Chiba et al., “Ferrite Test Cavity For Muses”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP25G, pp. 1823-1825.
[n] T. Sieber et al., “Next Generation Cryogenic Current Comparator (CCC) for nA Intensity Measurement”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2510-2513. doi:10.18429/JACoW-IPAC2019-WEPGW020
[n] J. Knaster, P. Cara, A. Mosnier, S. Chel, J. Molla, and H. Suzuki, “Installation and Commissioning of the 1.1 MW Deuteron Prototype Linac for IFMIF”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUOAB101, pp. 1090-1092.
[n] J. A. Carter et al., “Progress on the Final Design of the APS-Upgrade Storage Ring Vacuum System”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 30-32. doi:10.18429/JACoW-MEDSI2018-TUPH04
For LaTeX
Use Complete Form
For BibTeX
References
- J. T. Seeman et al., “Alignment Issues of the SLC Linac Accelerating Structure”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2949-2952.
- M. Nagaenko and I. Pavletsov, “Simulation of Beam Optics and Beam-Degrader Interaction for COMBAS Fragment-Separator”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1394-1397.
- N. Gonzalez, C. Colldelram, C. Escudero, and S. Ferrer, “High Frequency UHV Mechanical X-Ray Beam Chopper”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 339-341.
- D. H. Bilderback, “Energy Recovery Linac Experimental Challenges”, in Proc. 37th ICFA Advanced Beam Dynamics Workshop on Future Light Sources (FLS'06), Hamburg, Germany, May 2006, paper PLT03, pp. XX-XX.
- J. B. Murphy et al., “The Brookhaven Superconducting X-Ray Lithography Source (SXLS)”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1828-1831.
- R. Rujanakraikarn, Ch. Dhammatong, and W. Phacheerak, “Design and Implementation of Stepper Motor Control of the LINAC High Power RF System Based on FPGA”, in Proc. 12th International Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'18), Hsinchu City, Taiwan, Oct. 2018, pp. 179-182.
- R. De Prisco, A. R. Karlsson, M. Eshraqi, Y. I. Levinsen, and R. Miyamoto, “Integration of Interfaces and Stabilization System in the Design of a Drift Tube Linac”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 294-297.
- R. Kowalewicz et al., “Performance of the CERN Plasma Lens in Laboratory and Beam Tests at the Antiproton Source”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2631-2634.
- C. Peters et al., “Design and Performance of 40mm, 6.5 T, Collared, Cold-Iron Model Magnets”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3728-3731.
- J. Holmes, S. Cousineau, V. Danilov, A. Fedotov, S. Henderson, and A. Shishlo, “Computational Studies of Collective Beam Dynamics in High Intensity Rings”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TOAA005, pp. 117-119.
- A. E. Vlieks et al., “Development of An X-Band Photoinjector at SLAC”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper MO453, pp. 163-165.
- P. Arnold, J. Fydrych, W. Hees, J. M. Jurns, X. Wang, and J. G. Weisend, “The Accelerator Cryoplant at ESS”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper THPP041, pp. 939-941.
- E. Karantzoulis and A. Wrulich, “Multibunch Instability Investigation for the ELETTRA Cavities”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1618-1621.
- M. Sommer, M. H?Âner, B. D. Isbarn, S. Khan, B. Riemann, and T. Weis, “Coupled-Bunch Instability Suppression Using RF Phase Modulation at the DELTA Storage Ring”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 179-182.
- R. M. Jones and N. Juntong, “High-Gradient SRF Cavity with Minimized Surface E.M. Fields and Superior Bandwidth for the ILC”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper THPPO024, pp. 594-598.
- Z. A. Conway et al., “Cryomodule Designs for Superconducting Half-Wave Resonators”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper TUPB068, pp. 627-629.
- D. Anicic, “Quest for the New Standard PSI IOC Platform”, in Proc. 12th International Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'18), Hsinchu City, Taiwan, Oct. 2018, pp. 119-123.
- P. G. Barnes et al., “A Micro-Channel Plate Based Gas Ionization Profile Monitor with Shaping Field Electrodes for the ISIS H- Injector”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC147, pp. 1371-1373.
- S. A. Whitehead, P. G. Barnes, G. M. Cross, S. J. Payne, and A. Pertica, “Multi-Channeltron Based Profile Monitor at the ISIS Proton Synchrotron”, in Proc. 14th Beam Instrumentation Workshop (BIW'10), Santa Fe, NM, USA, May 2010, paper TUPSM007, pp. 106-110.
- A. Kitagawa, T. F. Fujita, and M. Muramatsu, “Present Status and Future Prospect of Heavy Ion Radiotherapy”, in Proc. 23th International Workshop on ECR Ion Sources (ECRIS'18), Catania, Italy, Sep. 2018, pp. 49-52.
- A. Wrulich, “ELETTRA Status Report”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 57-62.
- J. A. van der Heide, P. Magendans, J. L. J. de Regt, and W. J. Kleeven, “The Eindhoven Minicyclotron ILEC”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper D-10, pp. 121-124.
- Y. Chiba et al., “Ferrite Test Cavity For Muses”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP25G, pp. 1823-1825.
- T. Sieber et al., “Next Generation Cryogenic Current Comparator (CCC) for nA Intensity Measurement”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2510-2513.
- J. Knaster, P. Cara, A. Mosnier, S. Chel, J. Molla, and H. Suzuki, “Installation and Commissioning of the 1.1 MW Deuteron Prototype Linac for IFMIF”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUOAB101, pp. 1090-1092.
- J. A. Carter et al., “Progress on the Final Design of the APS-Upgrade Storage Ring Vacuum System”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 30-32.
Back to search