Favourites
For Word
[n] H. Beuscher et al., “The Characteristics of the Cyclotron JULIC as Injector for COSY”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper C-03, pp. 66-69.
[n] A. K. Orduz, M. Di Giacomo, J.-M. Lagniel, G. Normand, and D. U. Uriot, “SPIRAL2 Commissioning and Operations”, in Proc. HB'23, Geneva, Switzerland, Oct. 2023, pp. 106-111. doi:10.18429/JACoW-HB2023-TUA3I1
[n] P. K. Roy et al., “Development of a Li+ Alumino-Silicate Ion Source”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6RFP033, pp. 426-428.
[n] P. Emma, “Beam Based Alignment of Sector-1 of the SLC Linac”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1625-1628.
[n] P. T. Spampinato et al., “A Free Hg Jet System for Use in a High-Power Target Experiment”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAE073, pp. 3895-3897.
[n] R. Sundelin, M. Doleans, D. Jeon, and S. Kim, “SNS HOM Damping Requirements via Bunch Tracking”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPPH135, pp. 1984-1986.
[n] J. Chen et al., “Diagnostic and Timing Supports for Top-Up Injection Operation for the TLS”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMN082, pp. 4252-4254.
[n] H. Joehri, C. Hess, L. Nue, L. Patthey, and T. Schmitt, “Development of the RIXS Manipulator”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 35-37. doi:10.18429/JACoW-MEDSI2016-MOPE16
[n] Y. Asai, T. Kaneyasu, M. Katoh, H. Miyauchi, and M. Shimada, “Single electron storage at UVSOR-Ⅲ electron storage ring”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper MOPS056, unpublished.
[n] R. T. Dowd, M. P. Atkinson, M. J. Boland, G. LeBlanc, Y. E. Tan, and D. Teytelman, “Investigation of Trapped Resonant Modes in Insertion Devices at the Australian Synchrotron”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1710-1713. doi:10.18429/JACoW-IPAC2016-TUPOR023
[n] L. H. J. Bozyk, O. K. Kester, P. J. Spiller, and F. Chill, “Pumping Properties of Cryogenic Surfaces in SIS100”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3696-3698. doi:10.18429/JACoW-IPAC2015-THPF009
[n] A. A. Green et al., “Precision Measurements of the Effects of Energy and Intensity Modulation of an Optically-Pumped Polarized Ion Source”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper E-32, pp. 288-290.
[n] I. Podadera et al., “Manufacturing, Assembly and Tests of the LIPAc Medium Energy Beam Transport Line (MEBT)”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 554-557. doi:10.18429/JACoW-LINAC2016-TUPLR041
[n] Y. Levinsen et al., “First RF Phase Scans at the European Spallation Source”, in Proc. IBIC'22, Kraków, Poland, Sep. 2022, pp. 313-317. doi:10.18429/JACoW-IBIC2022-TUP35
[n] S.-H. Kim, B. H. Chung, K.-H. Chung, J.-S. Hong, J.-H. Jeon, and K. Lee, “RD Status of the 700 MHz, 1MW Klystron for PEFP”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAT071, pp. 3850-3852.
[n] Y. Higurashi et al., “Recent RIKEN 28 GHz SC-ECRIS Results”, in Proc. ECRIS'12, Sydney, Australia, Sep. 2012, paper THXO03, pp. 159-162.
[n] S. Seletskiy et al., “Analysis of Possible Beam Losses in the NSLS II BSR Transfer Line”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1959-1961. doi:10.18429/JACoW-IPAC2015-TUPMA056
[n] M. Veronese, S. Di Mitri, and M. Ferianis, “The Diagnostics of the FERMI@Elettra Bunch Compressors”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper THPPH029, pp. 629-632.
[n] P. Berrutti et al., “New Design of SSR2 Spoke Cavity for PIP II SRF Linac”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 600-604. doi:10.18429/JACoW-SRF2019-TUP066
[n] Yu. G. Alenitsky et al., “High Power Cyclotron Complex for Neutron Production”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP005, pp. 2145-2147.
[n] P. Pierini, S. Barbanotti, L. Monaco, and N. Panzeri, “Design of a Magnetic Shield Internal to the Helium Vessel of SRF Cavities”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP148, pp. 898-900.
[n] R. P. Walker et al., “Design, Construction and Testing of Insertion Devices for ELETTRA”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1587-1590.
[n] D. Cheng et al., “Status of the PEP-II Low-Energy Ring Vacuum System”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4P014, pp. 3619-3621.
[n] A. V. Smirnov, I. N. Meshkov, A. O. Sidorin, G. V. Trubnikov, A. V. Eliseev, and T. Katayama, “Stacking Modes with Barrier Buckets Method in NICA Collider”, in Proc. COOL'13, Mürren, Switzerland, Jun. 2013, paper WEPPO02, pp. 97-99.
[n] S. Cousineau et al., “Towards operational reality with laser assisted charge exchange”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper MOPS003, unpublished.
[n] T. Matsumoto, S. Michizono, T. Takenaka, S. Fukuda, K. Nakao, and K. Yoshida, “Development of C-band High-Power Mix-Mode RF Window”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper THP58, pp. 745-747.
[n] D. Kostin, W.-D. M?Âller, J. K. Sekutowicz, and K. Twarowski, “TESLA Type 9-Cell Cavities Continuous Wave Tests”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper TUPPO050, pp. 338-341.
[n] D. K. Olsen et al., “Recent Developments at the Holifield Heavy Ion Research Facility”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 452-455.
For LaTeX
Use Complete Form
For BibTeX
References
- H. Beuscher et al., “The Characteristics of the Cyclotron JULIC as Injector for COSY”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper C-03, pp. 66-69.
- A. K. Orduz, M. Di Giacomo, J.-M. Lagniel, G. Normand, and D. U. Uriot, “SPIRAL2 Commissioning and Operations”, in Proc. HB'23 (HB), Geneva, Switzerland, Oct. 2023, paper TUA3I1, pp. 106-111.
- P. K. Roy et al., “Development of a Li+ Alumino-Silicate Ion Source”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6RFP033, pp. 426-428.
- P. Emma, “Beam Based Alignment of Sector-1 of the SLC Linac”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1625-1628.
- P. T. Spampinato et al., “A Free Hg Jet System for Use in a High-Power Target Experiment”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper FPAE073, pp. 3895-3897.
- R. Sundelin, M. Doleans, D. Jeon, and S. Kim, “SNS HOM Damping Requirements via Bunch Tracking”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPPH135, pp. 1984-1986.
- J. Chen et al., “Diagnostic and Timing Supports for Top-Up Injection Operation for the TLS”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMN082, pp. 4252-4254.
- H. Joehri, C. Hess, L. Nue, L. Patthey, and T. Schmitt, “Development of the RIXS Manipulator”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 35-37.
- Y. Asai, T. Kaneyasu, M. Katoh, H. Miyauchi, and M. Shimada, “Single electron storage at UVSOR-Ⅲ electron storage ring”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPS056, this conference.
- R. T. Dowd, M. P. Atkinson, M. J. Boland, G. LeBlanc, Y. E. Tan, and D. Teytelman, “Investigation of Trapped Resonant Modes in Insertion Devices at the Australian Synchrotron”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1710-1713.
- L. H. J. Bozyk, O. K. Kester, P. J. Spiller, and F. Chill, “Pumping Properties of Cryogenic Surfaces in SIS100”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3696-3698.
- A. A. Green et al., “Precision Measurements of the Effects of Energy and Intensity Modulation of an Optically-Pumped Polarized Ion Source”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper E-32, pp. 288-290.
- I. Podadera et al., “Manufacturing, Assembly and Tests of the LIPAc Medium Energy Beam Transport Line (MEBT)”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 554-557.
- Y. Levinsen et al., “First RF Phase Scans at the European Spallation Source”, in Proc. 11th Int. Beam Instrumentation Conference (IBIC'22), Kraków, Poland, Sep. 2022, pp. 313-317.
- S.-H. Kim, B. H. Chung, K.-H. Chung, J.-S. Hong, J.-H. Jeon, and K. Lee, “RD Status of the 700 MHz, 1MW Klystron for PEFP”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAT071, pp. 3850-3852.
- Y. Higurashi et al., “Recent RIKEN 28 GHz SC-ECRIS Results”, in Proc. 20th Int. Workshop on ECR Ion Sources (ECRIS'12), Sydney, Australia, Sep. 2012, paper THXO03, pp. 159-162.
- S. Seletskiy et al., “Analysis of Possible Beam Losses in the NSLS II BSR Transfer Line”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1959-1961.
- M. Veronese, S. Di Mitri, and M. Ferianis, “The Diagnostics of the FERMI@Elettra Bunch Compressors”, in Proc. 28th Int. Free Electron Laser Conf. (FEL'06), Berlin, Germany, Aug.-Sep. 2006, paper THPPH029, pp. 629-632.
- P. Berrutti et al., “New Design of SSR2 Spoke Cavity for PIP II SRF Linac”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 600-604.
- Yu. G. Alenitsky et al., “High Power Cyclotron Complex for Neutron Production”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper THP005, pp. 2145-2147.
- P. Pierini, S. Barbanotti, L. Monaco, and N. Panzeri, “Design of a Magnetic Shield Internal to the Helium Vessel of SRF Cavities”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP148, pp. 898-900.
- R. P. Walker et al., “Design, Construction and Testing of Insertion Devices for ELETTRA”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1587-1590.
- D. Cheng et al., “Status of the PEP-II Low-Energy Ring Vacuum System”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 4P014, pp. 3619-3621.
- A. V. Smirnov, I. N. Meshkov, A. O. Sidorin, G. V. Trubnikov, A. V. Eliseev, and T. Katayama, “Stacking Modes with Barrier Buckets Method in NICA Collider”, in Proc. 9th Workshop on Beam Cooling and Related Topics (COOL'13), Mürren, Switzerland, Jun. 2013, paper WEPPO02, pp. 97-99.
- S. Cousineau et al., “Towards operational reality with laser assisted charge exchange”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPS003, this conference.
- T. Matsumoto, S. Michizono, T. Takenaka, S. Fukuda, K. Nakao, and K. Yoshida, “Development of C-band High-Power Mix-Mode RF Window”, in Proc. 22nd Linear Accelerator Conf. (LINAC'04), Lübeck, Germany, Aug. 2004, paper THP58, pp. 745-747.
- D. Kostin, W.-D. M?Âller, J. K. Sekutowicz, and K. Twarowski, “TESLA Type 9-Cell Cavities Continuous Wave Tests”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper TUPPO050, pp. 338-341.
- D. K. Olsen et al., “Recent Developments at the Holifield Heavy Ion Research Facility”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 452-455.
Back to search