JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	H. Suzuki et al., “Development of 5-Cell rf Cavity for SPring-8 Booster Synchrotron”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 707-710. 
[n]	M. Felber et al., “Upgrade of the Optical Synchronization System for FLASH II”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper THPA14, pp. 496-498. 
[n]	Z. B. Li, W. Fang, Q. Gu, X. X. Huang, J. H. Tan, and Z. T. Zhao, “High Power Test of the First C-band Spherical Pulse Compressor Prototype”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2896-2898. doi:10.18429/JACoW-IPAC2019-WEPRB042
[n]	N. Nakamura et al., “Phase Shifter Prototype with Laminated Permalloy Yokes for a Polarization-Controlled Undulator”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6PFP090, pp. 342-344. 
[n]	M. Nabinger et al., “Terahertz streaking detection for longitudinal bunch diagnostics at FLUTE”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPM064, unpublished. 
[n]	J. Kamiya, Y. Hikichi, K. Kanazawa, M. Kinsho, N. Ogiwara, and Y. Takiyama, “Vacuum Status during the Beam Operation of RCS in J-PARC”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6RFP016, pp. 384-386. 
[n]	R. Cizeron et al., “Experimental Determination of the Characteristics of a Positron Source Using Channeling (*)”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper MOB21, pp. 143-145. 
[n]	J. I. M. Botman, H. L. Hagedoorn, J. Reich, and P. Wucherer, “Analytical Treatment of Ion Inflectors”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper G-12, pp. 263-266. 
[n]	W. P. Lysenko, V. W. Hughes, S. Ohnuma, P. A. Thompson, and H. F. Vogel, “Beam Calculations for LAMPF Muon Channel”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1593-1598. 
[n]	R. Gebel, “NEGATIVE ION SOURCES AT THE INJECTOR CYCLOTRON FOR THE COOLER SYNCHROTRON COSY/J?£LICH”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 19P16, pp. XX-XX. 
[n]	D. G. Myakishev and B. N. Sukhina, “Calcultion of the Gun and Collector for Electron Cooling System EX35 and EX300”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP2B03, pp. 1384-1386. 
[n]	B. C. Brown et al., “Fermilab Recycler Collimation System Design”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 726-728. doi:10.18429/JACoW-NAPAC2016-WEPOA16
[n]	M. Syha, U. Ratzinger, and M. Schuett, “Beam Dynamics for the FAIR p-Linac Ladder RFQ”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 522-524. doi:10.18429/JACoW-LINAC2018-TUPO083
[n]	M. S. Champion et al., “Progress on the Proton Power Upgrade at the Spallation Neutron Source”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1876-1879. doi:10.18429/JACoW-IPAC2021-TUPAB199
[n]	T. Wehrli, M. B?Âge, J. Krempasky, and E. D. van Garderen, “Properties of X-ray Beam Position Monitors at the Swiss Light Source”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC139, pp. 3312-3314. 
[n]	A. Dolinskii et al., “Simulation Results on Cooling Times and Equilibrium Parameters for Antiproton Beams at the HESR”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT057, pp. 1972-1974. 
[n]	S. Zhao et al., “Development of Intense Beam Proton Linac in China”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper MOP14, pp. 63-65. 
[n]	Yu. K. Alekseev, S. V. Abramov, A. M. Gorokhov, V. I. Shvedunov, A. A. Vetrov, and D. A. Zayarniy, “Electron Micro-Accelerator”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH147, pp. 4017-4019. 
[n]	R. Nagaoka, M. Hara, H. Tanaka, K. Tsumaki, and K. Yoshida, “Effect of Insertion Devices on Beam Dynamics of the 8 GeV Light Source Storage Ring”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1361-1364. 
[n]	T. J. Zhang, C. J. Chu, G. F. Song, S. M. Wei, J. J. Yang, and J. Q. Zhong, “Correction Coil System for Compact High Intensity Cyclotron”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6PFP012, pp. 157-159. 
[n]	S. Adam and M. Humbel, “Integration of Compute-Bound Tasks in the SIN Control System”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper I4-04, pp. 418-421. 
[n]	R. Littauer and H. Pfeffer, “The Multiplex Control System for the Cornell 10 - GeV Synchrotron”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 1050-1053. 
[n]	Y. T. Yang, K. Fan, J. J. Li, and Y. Song, “Study on Spherical Aberration Correction of Solenoid Lens in Ultrafast Electron Diffraction”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 213-216. doi:10.18429/JACoW-IPAC2019-MOPGW054
[n]	T. J. Zhang et al., “Imperfection Investigation for the Main Magnet Construction for Compact Cyclotron”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6PFP011, pp. 154-156. 
[n]	M. Champion et al., “Progress towards the completion of the proton power upgrade project”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1691-1694. doi:10.18429/JACoW-IPAC2024-TUPS27
[n]	M. Kesselman, “Spallation Neutron Source Beam Current Monitor Electronics”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH102, pp. 2323-2325. 
[n]	Y. Hashimoto et al., “Beam Loading Experiment with Short Bunched Electron Beams for New Type of Accelerating RF System of High Intensity Proton Synchrotron”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP13G, pp. 1770-1772. 
[n]	W. E. Norum, “New Capabilities of the EPICS IOC Shell”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper MP504, pp. XX-XX. 
[n]	G. Jackson, “Operational Experience with the Permanent Magnet Recycler Ring at Fermilab”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP5B01, pp. 542-544. 
[n]	E. Chen, A. Shemyakin, J. Stanton, and R. Sharankova, “Emittance measurements with wire scanners in the Fermilab side-coupled linac”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 177-180. doi:10.18429/JACoW-LINAC2024-MOPB060
[n]	D. McGinnis, V. K. Bharadwaj, and J. Marriner, “Coupled Bunch Dipole Mode Measurements of Accelerating Beam in the Fermilab Booster”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1255-1258. 
[n]	J. P. Charrier, B. Coadou, and B. Visentin, “Improvements of Superconducting Cavity Performances at High Accelerating Gradients”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP07B, pp. 1885-1890. 
[n]	M. W. Guetg, B. Beutner, E. Prat, and S. Reiche, “Dispersion Based Beam Tilt Correction”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper TUPSO24, pp. 267-270. 
[n]	A. I. Wawrzyniak et al., “Solaris Storage Ring Performance After 6 Years of Operation”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1515-1517. doi:10.18429/JACoW-IPAC2021-TUPAB065
[n]	C. E. Gonzalez-Ortiz, R. Ainsworth, and P. N. Ostroumov, “Third-Order Resonance Compensation at the FNAL Recycler Ring”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 195-198. doi:10.18429/JACoW-IPAC2022-MOPOST050
[n]	A. Curcio, M. A. Knafel, G. W. Kowalski, R. Pana, M. Waniczek, and A. I. Wawrzyniak, “Bunch Length Characterizations for the Solaris Injector LINAC”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2117-2119. doi:10.18429/JACoW-IPAC2021-TUPAB277
[n]	T. Ieiri, H. Ishii, Y. Mizumachi, A. Ogata, J.-L. Pellegrin, and M. Tejima, “Beam Diagnostics of the Triastan  Accumulation Ring”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2356-2359. 
[n]	D. L. Birx, S. A. Hawkins, S. E. Poor, L. L. Reginato, and M. W. Smith, “Technology of Magnetically Driven Accelerators”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2743-2748. 
[n]	M. Kuntzsch, M. K. Czwalinna, J. Kral, A. Maalberg, A. Schwarz, and K. Zenker, “Update of the Bunch Arrival Time Monitor at ELBE”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 260-262. doi:10.18429/JACoW-IPAC2022-MOPOPT016
[n]	J. Hetzel et al., “Final preparation of accelerated and polarised protons at COSY Jülich”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1657-1660. doi:10.18429/JACoW-IPAC2024-TUPS12
[n]	P. K. Bartkiewicz, S. W. Herb, S. Weisse, H. Wu, and P. Duval, “The TINE Control System, Overview and Status”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper FOPA03, pp. 733-735. 
[n]	G. Blokesch et al., “Test of a DC-photogun Injector for the Lighthouse facility”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1390-1392. doi:10.18429/JACoW-IPAC2023-TUPA020
[n]	M. Böge, J. Chrin, M. Muñoz, and A. Streun, “Commissioning of the SLS Using CORBA Based Beam Dynamics Applications”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TOPB012, pp. 292-294. 
[n]	H. S. Marks et al., “Performance and Parameters of a Novel Talbot Effect Confocal Resonator for mm-wave FEL”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper WEPC07, pp. 511-512. 
[n]	W. Cheng, Z. Zhu, M. Zhao, M. Zhang, and D. Gu, “Start-to-end simulations of microbunching instability based on optimized velocity bunching in linac-driven FELs”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 817-820. doi:10.18429/JACoW-IPAC2024-MOPS42
[n]	N. M. Cook, J. M. Brennan, and S. Peggs, “Harmonic Ratcheting for Fast Acceleration”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPMA25, pp. 1034-1036. 
[n]	M. Hara, H. Kamitsubo, and N. Kumagai, “Status of the SPring-8 Project (Storage Ring)”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2646-2649. 
[n]	B. van der Horst, M. Helmig, A. Matheisen, S. Saegebarth, and M. Schalwat, “Series Production of BQU at DESY for the EU-XFEL Module Assembly at CEA Saclay”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper TUPB104, pp. 865-868. 
[n]	A. Enomoto et al., “KEK Plasma Wakefield Accelerator Experiemnts”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 634-637. 
[n]	O. R. Sander, D. D. Chamberlin, R. A. Jameson, and G. N. Minerbo, “Beam Tomography in Two and Four Dimensions”, in Proc. LINAC'79, Montauk, NY, USA, Sep. 1979, paper S5-10, pp. 314-318. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search