Favourites
For Word
[n] P. Snopok, A. D. Bross, P. G. Lane, and Y. Torun, “RF Cavity Spark Localization Using Acoustic Measurement”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPFI074, pp. 2863-2865.
[n] C. Biscari, D. Alesini, A. Ghigo, J. B. Jeanneret, and F. Marcellini, “CLIC Drive Beam Frequency Multiplication System Design”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6PFP076, pp. 2673-2675.
[n] J. Valladares, A. Waghmare, J. Castellano, and J. Bradley III, “Transverse electric modes in a resonant cavity and the resultant kick to an 800 MeV proton beam”, presented at the LINAC'24, Chicago, IL, USA, Aug. 2024, paper MOPB086, unpublished.
[n] J. Staples et al., “A Deuteron Linac for a High-Intensity Neutron Source”, in Proc. LINAC'76, Chalk River, Canada, Sep. 1976, paper C07, pp. 148-152.
[n] A. Faltens, E. Hartwig, D. Keefe, and W. Salsig, “Preliminary Hardware Concepts for a High-Energy Electron-Ring Accelerator”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 484-488.
[n] R. Brinkmann and M. Boege, “Beam-based Alignment and Polarization Optimization in the HERA Electron Ring”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 938-941.
[n] Y.-G. Song, Y.-S. Cho, J.-H. Jang, and H.-J. Kwon, “Development of the Control System for PEFP 100-MeV Proton Linear Accelerator”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper FRCB02, pp. 257-259.
[n] F. Hug, M. Arnold, T. Bahlo, J. Pforr, and N. Pietralla, “Beam Based Alignment of SRF Cavities in an Electron Injector Linac”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4219-4222. doi:10.18429/JACoW-IPAC2018-THPMF064
[n] J. C. Smith et al., “Comparison of Tracking Codes for the International Linear Collider”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMS013, pp. 3020-3022.
[n] J. A. Gore et al., “A FPGA Based High Speed Data Acquisition Card”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper FRCC02, pp. 271-273.
[n] R. Avery et al., “The Era 4 MeV Injector”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 479-484.
[n] A. F. D. Morgan, G. Rehm, and I. Uzun, “First Tests of the Transverse Multibunch Feedback at Diamond”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper WEPB28, pp. 295-297.
[n] C. P. Welsch, “Advances in Diagnostics for Medical Accelerators”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 37-40. doi:10.18429/JACoW-IBIC2017-MOPCC01
[n] K. Whitham et al., “200 MeV RF Linac for Synchrotron Injection”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TH4-05, pp. 615-617.
[n] S. Kato et al., “Fabrication of 9 Cell Coupon Cavity for Vertical Electropolishing Test”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 220-222. doi:10.18429/JACoW-LINAC2016-MOPLR038
[n] S. Srinivasan and P.-A. Duperrex, “Reentrant Cavity Resonator for Low Intensities Proton Beam Measurements”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2341-2344. doi:10.18429/JACoW-IPAC2018-WEPAL069
[n] K. Schoenberg, “The LANSCE Accelerator: A Powerful Tool for Science and Applications”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOZAC03, pp. 120-120.
[n] O. Holme, D. R. S. Di Calafiori, G. Dissertori, W. Lustermann, and S. Zelepoukine, “Maintaining an Effective and Efficient Control System for the Electromagnetic Calorimeter of the Compact Muon Solenoid Experiment During Long-term CERN Large Hadron Collider Operations”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper FRCB01, pp. 254-256.
[n] G. Rehm, R. Bartolini, V. Karataev, I. P. S. Martin, and A. F. D. Morgan, “Ultra-Fast mm-Wave Detectors for Observation of Microbunching Instabilities in the Diamond Storage Ring”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper TUPD32, pp. 369-371.
[n] V. V. Smaluk, A. Blednykh, K. Ha, Y. Tian, and X. Yang, “A Method of Local Impedance Measurement by Sine-wave Beam Excitation”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 41-43. doi:10.18429/JACoW-IBIC2017-MOPCC03
[n] A. E. Vlieks, W. R. Fowkes, R. J. Loewen, and S. G. Tantawi, “High Power RF Component Testing for the NLC”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU4074, pp. 570-572.
[n] M. Wolf et al., “Expansion of the MTCA Based Direct Sampling LLRF at MedAustron for Hadron Synchrotron Applications”, in Proc. IBIC'23, Saskatoon, Canada, Sep. 2023, pp. 63-65. doi:10.18429/JACoW-IBIC2023-MOP013
[n] P. Balleyguier, H. Borrion, D. Deslandes, and Ph. Guimbal, “A High Dynamic-Range Beam Position Measurement System for ELSA-2”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPB022, pp. 2458-2460.
[n] D. Coves et al., “Experimental Evaluation of a Digitizer Designed for ACCT Beam Current Transformers”, presented at the IPAC'26, Deauville, France, May 2026, paper WEP6031, unpublished.
[n] T. Torims et al., “Development of a Hybrid Electron Accelerator System for the Treatment of Marine Diesel Exhaust Gases”, in Proc. IPAC'20, Caen, France, May 2020, pp. 80. doi:10.18429/JACoW-IPAC2020-THVIR14
[n] N. Steinhau-Kuehl, R. Bandelmann, D. Kostin, A. Matheisen, M. Schmoekel, and J. K. Sekutowicz, “Vertical Electro-Polishing at DESY of a 1.3 GHz Gun Cavity for CW Application”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper MOPB103, pp. 399-403.
[n] D. Soriano Guill?â, R. Seviour, and S. Hunt, “RF Cavity Design for a Low Cost 1 MeV Proton Source”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4355-4357. doi:10.18429/JACoW-IPAC2017-THPIK110
[n] R. Avery et al., “The Bevalac Beam Transport System”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1529-1533.
[n] K. P. Dixit et al., “Design and Development of Pulsed Modulators for RF Electron Linacs”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP004, pp. 55-57.
[n] R. Soto, N. Saez, T. C. Shen, and J. P. A. Ibsen, “ALMA Release Management: A Practical Approach”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 94-97. doi:10.18429/JACoW-ICALEPCS2015-MOM311
[n] P. B. Wilson, “Future e+e- Linear Colliders and Beam-Beam Effects”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper FR1-1, pp. 585-590.
[n] Y.-C. Huang, F. H. Chao, C. H. Chen, K. Y. Huang, and P. J. Chou, “Soft X-ray Free-electron Laser with a 10-time Reduced Size”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC096, pp. 3113-3115.
[n] H. Anamkath et al., “Design and Factory Test of the e e- Frascati Linear Accelerator for DAPhiNE”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 716-719.
[n] Ch. Leemann et al., “A 3-Dimensioanl Beam Scanning System for Particle Radiation Therapy”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1052-1055.
[n] J. Bogart, N. Phinney, M. Ross, and D. Yaffe, “Beam Position Monitor Readout and Control in the SLC Linac”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2101-2104.
[n] S. Molloy, M. J. Hogan, Y. Nosochkov, A. Seryi, and P. Tenenbaum, “Simulations of Jitter Coupling due to Wakefields in the FACET Linac”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5RFP084, pp. 4734-4736.
[n] P. Roychowdhury, D. P. Chakravarthy, P. Jain, K. C. Mittal, and A. K. Ray, “Design and Development of Beam Transport Elements for the BARC-ECIL Linac”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper TUPMA076, pp. 220-222.
[n] H. Burkhardt, J. Miles, J. Rothberg, and G. von Holtey, “Experience with Particle Backgrounds at LEP”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 451-454.
[n] K. V. Nagesh, “Theoretical Analysis of the Recovery Times in Low Pressure Sparkgaps - Positive Ion Diffusion Method”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THPMA065, pp. 723-725.
[n] L. Abadie et al., “SDD toolkit : ITER CODAC Platform for Configuration and Development”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC003, pp. 550-553.
[n] J. Cuperus and R. Morgado, “A Multi-Wire Chamber System for Heavy Ion Beam Monitoring at the Bevalac”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1561-1565.
[n] T. Bahlo, C. Burandt, F. Hug, and N. Pietralla, “Implementation of a High Level Phase Controller for the Superconducting Injector of the S-DALINAC”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 814-816. doi:10.18429/JACoW-IPAC2015-MOPHA019
[n] P. H. Williams et al., “Developments in the CLARA FEL Test Facility Accelerator Design and Simulations”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 797-800. doi:10.18429/JACoW-IPAC2016-MOPOW037
[n] B. Y. Sharkov, “Development of Physics and Technology of Particle Accelerators for Basic Science and Applications”, presented at the RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, paper MOX01, unpublished.
[n] W. Herr, R. Lauckner, and G. Morpurgo, “The RTC - A Software Support System for the Control of the CERN SPS”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1678-1681.
[n] P. B. Wilson, “Current Status of Superconducting Accelerator Technology”, in Proc. LINAC'72, Los Alamos, NM, USA, Oct. 1972, paper D01, pp. 82-89.
[n] A. Sharma et al., “Multi Gigawatt High Current Pulsed Electron Accelerator Technology Development Program at BARC”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP007, pp. 456-458.
[n] H. P. Chang, C. C. Kuo, and J. Safranek, “Correction of Lattice Optics in the Presence of Strong Wiggler Magnet at SRRC”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 6D004, pp. 674-676.
[n] S. Srinivasan, P.-A. Duperrex, and J. M. Schippers, “Quadrated Dielectric-Filled Reentrant Cavity Resonator as a Proton Beam Position Diagnostic”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2676-2679. doi:10.18429/JACoW-IPAC2019-WEPGW083
[n] A. Gokhale, B. P. Dubey, and A. S. Sharma, “Artificial Neural Network Calculates Backward Wave Oscillator Parameters Reliably For Pulsed Accelerators”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THPMA073, pp. 738-739.
[n] G. Kube et al., “A MTCA Based BPM-System for PETRA IV”, in Proc. IBIC'23, Saskatoon, Canada, Sep. 2023, pp. 19-23. doi:10.18429/JACoW-IBIC2023-MO3C04
[n] R. Chandra, S. R. Ghodke, A. S. Patel, A. Sharma, and S. K. Singh, “Design of Relativistic Magnetron for High Power Microwave Generation”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP006, pp. 452-455.
[n] T. C. Shen et al., “The Evolution of the Simulation Environment in ALMA”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 765-768. doi:10.18429/JACoW-ICALEPCS2015-WEPGF031
[n] M. Schmoekel et al., “Experience on In-situ Module Repair and Set Up of Non XFEL Cavity Strings at DESY”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 269-272. doi:10.18429/JACoW-SRF2017-MOPB088
[n] F. Zhu et al., “Measurements on Particle Contamination During Cavity Assembly”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper TUP52, pp. 466-469.
[n] A. Roy, J. Mondal, and K. C. Mittal, “Structural Analysis of Single Cell Superconducting Elliptical Cavity with Static Lorentz Force”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper TUP17, pp. 275-277.
[n] G. Danby et al., “AGS Booster Prototype Magnets”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1422-1425.
[n] A. Lagzda et al., “Very-High Energy Electron (VHEE) Studies at CERN's CLEAR User Facility”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 445-448. doi:10.18429/JACoW-IPAC2018-MOPML023
[n] V. T. Nimje, D. Bhattacharjee, K. Dixit, D. Jayaprakash, K. C. Mittal, and A. K. Ray, “Design and Development of 30 MeV, 3 kW RF Electron LINAC”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper WEPMA122, pp. 491-493.
[n] C.-Y. Liu, D.-G. Huang, and J. C. Huang, “Optimal Design for Resonant Power Transformer”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPD061, pp. 3650-3652.
[n] G. P. Ferri, M. Glaser, F. Lemeilleur, and G. von Holtey, “Commissioning and Operating Experience with the Interaction Rate and Background Monitors of the LEP ee- Collider”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 797-800.
[n] Y. L. Martirosyan, M. Ivanyan, and D. K. Kalantaryan, “Nonlinear Beam Dynamics Study with MATLAB”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT001, pp. 1813-1815.
[n] Z. Chen, N. K. Bultman, and C. Gautier, “Spallation Neutron Source LINAC Vacuum Seal Design and Testing”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH046, pp. 2192-2194.
[n] A. F. D. Morgan, “Technological Review of Beam Position Button Design and Manufacture”, in Proc. IBIC'19, Malmö, Sweden, Sep. 2019, pp. 448-452. doi:10.18429/JACoW-IBIC2019-WEAO01
For LaTeX
Use Complete Form
For BibTeX
References
- P. Snopok, A. D. Bross, P. G. Lane, and Y. Torun, “RF Cavity Spark Localization Using Acoustic Measurement”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPFI074, pp. 2863-2865.
- C. Biscari, D. Alesini, A. Ghigo, J. B. Jeanneret, and F. Marcellini, “CLIC Drive Beam Frequency Multiplication System Design”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6PFP076, pp. 2673-2675.
- J. Valladares, A. Waghmare, J. Castellano, and J. Bradley III, “Transverse electric modes in a resonant cavity and the resultant kick to an 800 MeV proton beam”, presented at the 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, paper MOPB086, unpublished.
- J. Staples et al., “A Deuteron Linac for a High-Intensity Neutron Source”, in Proc. 1976 Proton Linear Accelerator Conf. (LINAC'76), Chalk River, Canada, Sep. 1976, paper C07, pp. 148-152.
- A. Faltens, E. Hartwig, D. Keefe, and W. Salsig, “Preliminary Hardware Concepts for a High-Energy Electron-Ring Accelerator”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 484-488.
- R. Brinkmann and M. Boege, “Beam-based Alignment and Polarization Optimization in the HERA Electron Ring”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 938-941.
- Y.-G. Song, Y.-S. Cho, J.-H. Jang, and H.-J. Kwon, “Development of the Control System for PEFP 100-MeV Proton Linear Accelerator”, in Proc. 9th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'12), Kolkata, India, Dec. 2012, paper FRCB02, pp. 257-259.
- F. Hug, M. Arnold, T. Bahlo, J. Pforr, and N. Pietralla, “Beam Based Alignment of SRF Cavities in an Electron Injector Linac”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4219-4222.
- J. C. Smith et al., “Comparison of Tracking Codes for the International Linear Collider”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMS013, pp. 3020-3022.
- J. A. Gore et al., “A FPGA Based High Speed Data Acquisition Card”, in Proc. 9th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'12), Kolkata, India, Dec. 2012, paper FRCC02, pp. 271-273.
- R. Avery et al., “The Era 4 MeV Injector”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 479-484.
- A. F. D. Morgan, G. Rehm, and I. Uzun, “First Tests of the Transverse Multibunch Feedback at Diamond”, in Proc. 8th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'07), Venice, Italy, May 2007, paper WEPB28, pp. 295-297.
- C. P. Welsch, “Advances in Diagnostics for Medical Accelerators”, in Proc. 6th Int. Beam Instrumentation Conf. (IBIC'17), Grand Rapids, MI, USA, Aug. 2017, pp. 37-40.
- K. Whitham et al., “200 MeV RF Linac for Synchrotron Injection”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TH4-05, pp. 615-617.
- S. Kato et al., “Fabrication of 9 Cell Coupon Cavity for Vertical Electropolishing Test”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 220-222.
- S. Srinivasan and P.-A. Duperrex, “Reentrant Cavity Resonator for Low Intensities Proton Beam Measurements”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2341-2344.
- K. Schoenberg, “The LANSCE Accelerator: A Powerful Tool for Science and Applications”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOZAC03, pp. 120-120.
- O. Holme, D. R. S. Di Calafiori, G. Dissertori, W. Lustermann, and S. Zelepoukine, “Maintaining an Effective and Efficient Control System for the Electromagnetic Calorimeter of the Compact Muon Solenoid Experiment During Long-term CERN Large Hadron Collider Operations”, in Proc. 9th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'12), Kolkata, India, Dec. 2012, paper FRCB01, pp. 254-256.
- G. Rehm, R. Bartolini, V. Karataev, I. P. S. Martin, and A. F. D. Morgan, “Ultra-Fast mm-Wave Detectors for Observation of Microbunching Instabilities in the Diamond Storage Ring”, in Proc. 9th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'09), Basel, Switzerland, May 2009, paper TUPD32, pp. 369-371.
- V. V. Smaluk, A. Blednykh, K. Ha, Y. Tian, and X. Yang, “A Method of Local Impedance Measurement by Sine-wave Beam Excitation”, in Proc. 6th Int. Beam Instrumentation Conf. (IBIC'17), Grand Rapids, MI, USA, Aug. 2017, pp. 41-43.
- A. E. Vlieks, W. R. Fowkes, R. J. Loewen, and S. G. Tantawi, “High Power RF Component Testing for the NLC”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TU4074, pp. 570-572.
- M. Wolf et al., “Expansion of the MTCA Based Direct Sampling LLRF at MedAustron for Hadron Synchrotron Applications”, in Proc. 12th International Beam Instrumentation Conference (IBIC'23), Saskatoon, Canada # e.g. "Barcelona, Spain" or "San Francisco, CA, USA", Sep. 2023, paper MOP013, pp. 63-65.
- P. Balleyguier, H. Borrion, D. Deslandes, and Ph. Guimbal, “A High Dynamic-Range Beam Position Measurement System for ELSA-2”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPB022, pp. 2458-2460.
- D. Coves et al., “Experimental Evaluation of a Digitizer Designed for ACCT Beam Current Transformers”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper WEP6031, this conference.
- T. Torims et al., “Development of a Hybrid Electron Accelerator System for the Treatment of Marine Diesel Exhaust Gases”, in Proc. 11th Int. Particle Accelerator Conf. (IPAC'20), Caen, France, May 2020, pp. 80.
- N. Steinhau-Kuehl, R. Bandelmann, D. Kostin, A. Matheisen, M. Schmoekel, and J. K. Sekutowicz, “Vertical Electro-Polishing at DESY of a 1.3 GHz Gun Cavity for CW Application”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper MOPB103, pp. 399-403.
- D. Soriano Guill?â, R. Seviour, and S. Hunt, “RF Cavity Design for a Low Cost 1 MeV Proton Source”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4355-4357.
- R. Avery et al., “The Bevalac Beam Transport System”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1529-1533.
- K. P. Dixit et al., “Design and Development of Pulsed Modulators for RF Electron Linacs”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP004, pp. 55-57.
- R. Soto, N. Saez, T. C. Shen, and J. P. A. Ibsen, “ALMA Release Management: A Practical Approach”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 94-97.
- P. B. Wilson, “Future e+e- Linear Colliders and Beam-Beam Effects”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper FR1-1, pp. 585-590.
- Y.-C. Huang, F. H. Chao, C. H. Chen, K. Y. Huang, and P. J. Chou, “Soft X-ray Free-electron Laser with a 10-time Reduced Size”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPC096, pp. 3113-3115.
- H. Anamkath et al., “Design and Factory Test of the e e- Frascati Linear Accelerator for DAPhiNE”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 716-719.
- Ch. Leemann et al., “A 3-Dimensioanl Beam Scanning System for Particle Radiation Therapy”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1052-1055.
- J. Bogart, N. Phinney, M. Ross, and D. Yaffe, “Beam Position Monitor Readout and Control in the SLC Linac”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2101-2104.
- S. Molloy, M. J. Hogan, Y. Nosochkov, A. Seryi, and P. Tenenbaum, “Simulations of Jitter Coupling due to Wakefields in the FACET Linac”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5RFP084, pp. 4734-4736.
- P. Roychowdhury, D. P. Chakravarthy, P. Jain, K. C. Mittal, and A. K. Ray, “Design and Development of Beam Transport Elements for the BARC-ECIL Linac”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper TUPMA076, pp. 220-222.
- H. Burkhardt, J. Miles, J. Rothberg, and G. von Holtey, “Experience with Particle Backgrounds at LEP”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 451-454.
- K. V. Nagesh, “Theoretical Analysis of the Recovery Times in Low Pressure Sparkgaps - Positive Ion Diffusion Method”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper THPMA065, pp. 723-725.
- L. Abadie et al., “SDD toolkit : ITER CODAC Platform for Configuration and Development”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC003, pp. 550-553.
- J. Cuperus and R. Morgado, “A Multi-Wire Chamber System for Heavy Ion Beam Monitoring at the Bevalac”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1561-1565.
- T. Bahlo, C. Burandt, F. Hug, and N. Pietralla, “Implementation of a High Level Phase Controller for the Superconducting Injector of the S-DALINAC”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 814-816.
- P. H. Williams et al., “Developments in the CLARA FEL Test Facility Accelerator Design and Simulations”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 797-800.
- B. Y. Sharkov, “Development of Physics and Technology of Particle Accelerators for Basic Science and Applications”, presented at the 27th Russian Particle Accelerator Conference (RuPAC2021), Alushta, Crimea, Sep.-Oct. 2021, paper MOX01, unpublished.
- W. Herr, R. Lauckner, and G. Morpurgo, “The RTC - A Software Support System for the Control of the CERN SPS”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1678-1681.
- P. B. Wilson, “Current Status of Superconducting Accelerator Technology”, in Proc. 1972 Proton Linear Accelerator Conf. (LINAC'72), Los Alamos, NM, USA, Oct. 1972, paper D01, pp. 82-89.
- A. Sharma et al., “Multi Gigawatt High Current Pulsed Electron Accelerator Technology Development Program at BARC”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP007, pp. 456-458.
- H. P. Chang, C. C. Kuo, and J. Safranek, “Correction of Lattice Optics in the Presence of Strong Wiggler Magnet at SRRC”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 6D004, pp. 674-676.
- S. Srinivasan, P.-A. Duperrex, and J. M. Schippers, “Quadrated Dielectric-Filled Reentrant Cavity Resonator as a Proton Beam Position Diagnostic”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2676-2679.
- A. Gokhale, B. P. Dubey, and A. S. Sharma, “Artificial Neural Network Calculates Backward Wave Oscillator Parameters Reliably For Pulsed Accelerators”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper THPMA073, pp. 738-739.
- G. Kube et al., “A MTCA Based BPM-System for PETRA IV”, in Proc. 12th International Beam Instrumentation Conference (IBIC'23), Saskatoon, Canada # e.g. "Barcelona, Spain" or "San Francisco, CA, USA", Sep. 2023, paper MO3C04, pp. 19-23.
- R. Chandra, S. R. Ghodke, A. S. Patel, A. Sharma, and S. K. Singh, “Design of Relativistic Magnetron for High Power Microwave Generation”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP006, pp. 452-455.
- T. C. Shen et al., “The Evolution of the Simulation Environment in ALMA”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 765-768.
- M. Schmoekel et al., “Experience on In-situ Module Repair and Set Up of Non XFEL Cavity Strings at DESY”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 269-272.
- F. Zhu et al., “Measurements on Particle Contamination During Cavity Assembly”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper TUP52, pp. 466-469.
- A. Roy, J. Mondal, and K. C. Mittal, “Structural Analysis of Single Cell Superconducting Elliptical Cavity with Static Lorentz Force”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper TUP17, pp. 275-277.
- G. Danby et al., “AGS Booster Prototype Magnets”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1422-1425.
- A. Lagzda et al., “Very-High Energy Electron (VHEE) Studies at CERN's CLEAR User Facility”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 445-448.
- V. T. Nimje, D. Bhattacharjee, K. Dixit, D. Jayaprakash, K. C. Mittal, and A. K. Ray, “Design and Development of 30 MeV, 3 kW RF Electron LINAC”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper WEPMA122, pp. 491-493.
- C.-Y. Liu, D.-G. Huang, and J. C. Huang, “Optimal Design for Resonant Power Transformer”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPD061, pp. 3650-3652.
- G. P. Ferri, M. Glaser, F. Lemeilleur, and G. von Holtey, “Commissioning and Operating Experience with the Interaction Rate and Background Monitors of the LEP ee- Collider”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 797-800.
- Y. L. Martirosyan, M. Ivanyan, and D. K. Kalantaryan, “Nonlinear Beam Dynamics Study with MATLAB”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPLT001, pp. 1813-1815.
- Z. Chen, N. K. Bultman, and C. Gautier, “Spallation Neutron Source LINAC Vacuum Seal Design and Testing”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH046, pp. 2192-2194.
- A. F. D. Morgan, “Technological Review of Beam Position Button Design and Manufacture”, in Proc. 8th Int. Beam Instrumentation Conf. (IBIC'19), Malmö, Sweden, Sep. 2019, pp. 448-452.
Back to search