Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] S. P. Antipov et al., “Experimental Test of Semiconductor Dechirper”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1932-1934. doi:10.18429/JACoW-IPAC2015-TUPMA043
[n] A. Skrinsky, “Accelerator Field Development at Novosibirsk (History, Status, Prospects)”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MAD04, pp. 14-26.
[n] M. Peiniger, C. Piel, H. Vogel, and P. vom Stein, “A 100 MeV Injector Linac for the Swiss Light Source Supplied by Industry”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA56, pp. 3510-3512.
[n] E. Marin, A. Latina, J. Pfingstner, D. Schulte, and R. Tomas, “Tuning of CLIC-Final Focus System 3 TeV Baseline Design Under Static and Dynamic Imperfections”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 196-199. doi:10.18429/JACoW-IPAC2018-MOPMF043
[n] D. L. Hall et al., “Surface Analysis of Features Seen on Nb3Sn Sample Coupons Grown by Vapour Diffusion”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1130-1133. doi:10.18429/JACoW-IPAC2017-MOPVA119
[n] B. Petersen, “High Gradient CW Modules for FEL/Standard Modules”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper THWG4, pp. 752-754.
[n] S. Liu, P. Bambade, S. Bai, T. Tauchi, and N. Terunuma, “Development of Diamond Sensors for Beam Halo and Compton Spectrum Diagnostics After The Interaction Point of ATF2”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPME003, pp. 470-472.
[n] S. P. Antipov et al., “Single Crystal Diamond X-ray Lens Development”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3643-3644. doi:10.18429/JACoW-IPAC2016-THPMW041
[n] M. J. Lee et al., “Mathematical Models for the Control Program of SLAC Linear Collider”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2155-2158.
[n] E. D. Gazazyan, G. G. Oksuzyan, E. S. Pogossian, and A. D. Ter-Pogossyan, “Electron Beam Monitor based on Waveguide with Thin Impedance Films”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP2A16, pp. 1318-1320.
[n] J. A. Caggiano et al., “Design of the Neutron Imaging Differential Pumping Line at LLNL”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1312-1314. doi:10.18429/JACoW-IPAC2019-TUPMP033
[n] S. S. Karkare, I. V. Bazarov, L. Cultrera, W. J. Schaff, X. G. Jin, and Y. Takeda, “Photoemission from III-V Semiconductor Cathodes”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 736-738. doi:10.18429/JACoW-IPAC2014-MOPRI057
[n] V. N. Litvinenko, S. H. Park, Y. Wu, and I. V. Pinayev, “The Duke XUV FEL Storage Ring Facility”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 6D066, pp. 834-836.
[n] U. Klein, M. Peiniger, and H. Vogel, “RF Superconductivity at Interatom”, in Proc. SRF'89, Tsukuba, Japan, Aug. 1989, paper SRF89G08, pp. XX-XX.
[n] J. Staples, S. Abbott, R. Caylor, R. Gough, D. Howard, and R. MacGill, “A Compact Proton RFQ Injector for the Bevalac”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper MO3-05, pp. 48-50.
[n] R. I. Saban et al., “Coordination of the Commissioning of the LHC Technical Systems”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC118, pp. 340-342.
[n] O. R. Blanco, P. Bambade, and R. Tomas, “CLIC 3 TeV Beam Size Optimization with Radiation Effects”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWO003, pp. 1877-1879.
[n] R. O. Hettel et al., “Ideas for a Future PEP Light Source”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC023, pp. 2031-2033.
[n] A. Ratti, J. M. Brennan, J. Brodowski, E. Onillon, and J. Rose, “The RHIC Accelerating Cavity Prototype Tuner”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPQ17, pp. 2705-2707.
[n] P. A. Lin, C. K. Kuan, T. Y. Lee, H. Y. Lin, and I. C. Sheng, “Brazing and Helium Leaking Test for High Heat Load Components in the Taiwan Photon Source”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 4004-4006. doi:10.18429/JACoW-IPAC2014-THPRI098
[n] N. Barov, J. S. Kim, R. H. Miller, and D. J. Newsham, “Novel Acceleration Structure Using Slot Resonance Coupling”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP014, pp. 839-841.
[n] Y. Yano, A. Goto, K. Hatanaka, S. Motonaga, and H. Takebe, “Beam Injection and Extraction System of RIKEN Ring Cyclotron”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper I6-01, pp. 470-472.
[n] V. G. Dudnikov and C. M. Ankenbrandt, “Efficient Plasma Generation by Positive Circulating Beams”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPD045, pp. 1503-1505.
[n] R. C. York et al., “The NSCL Coupled Cyclotron Project - Overview and Status”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper K-01, pp. 687-691.
[n] S. Ramamoorthy, P. Pearson, and J. Smith, “Error Handling in the NSLS Control System”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPR07, pp. 2250-2252.
[n] K. W. Shepard, R. Benaroya, L. M. Bollinger, and C. H. Scheibelhut, “Split Ring Resonator for the Argonne Superconducting Heavy Ion Booster”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1147-1150.
[n] J. Skelly, C. Gardner, A. Kponou, A. Luccio, and K. Reece, “Generalized Emittance Measurements in a Beam Transport Line”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1473-1476.
[n] L. Liu et al., “Status of SIRIUS operation with users”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2586-2589. doi:10.18429/JACoW-IPAC2023-WEOGA2
[n] E. L?®corch?® and P. Lermine, “Use of the Ingres RDBMS inside the new Ganil Linux based control system”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P1_087.
[n] S. A. Nikitin et al., “High-Efficiency Polarimeter Based on Intra-Beam Scattering at VEPP-4M”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPRI121, pp. 1954-1956.
[n] C. A. Lindstrom, E. Adli, J. Pfingstner, E. Marin, and D. Schulte, “Transverse Tolerances of a Multi-Stage Plasma Wakefield Accelerator”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2561-2564. doi:10.18429/JACoW-IPAC2016-WEPMY009
[n] L. Xiao, C.-K. Ng, J. E. Dey, and I. Kourbanis, “Second Harmonic Cavity Design for Project-X Main Injector”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPC087, pp. 2417-2419.
[n] L. David, E. Lecorche, T. T. Luong, and M. Ulrich, “The GANIL Computer Control System Renewal”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 830-833.
For LaTeX
Use Complete Form
For BibTeX
References
- S. P. Antipov et al., “Experimental Test of Semiconductor Dechirper”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1932-1934.
- A. Skrinsky, “Accelerator Field Development at Novosibirsk (History, Status, Prospects)”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MAD04, pp. 14-26.
- M. Peiniger, C. Piel, H. Vogel, and P. vom Stein, “A 100 MeV Injector Linac for the Swiss Light Source Supplied by Industry”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA56, pp. 3510-3512.
- E. Marin, A. Latina, J. Pfingstner, D. Schulte, and R. Tomas, “Tuning of CLIC-Final Focus System 3 TeV Baseline Design Under Static and Dynamic Imperfections”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 196-199.
- D. L. Hall et al., “Surface Analysis of Features Seen on Nb3Sn Sample Coupons Grown by Vapour Diffusion”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1130-1133.
- B. Petersen, “High Gradient CW Modules for FEL/Standard Modules”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper THWG4, pp. 752-754.
- S. Liu, P. Bambade, S. Bai, T. Tauchi, and N. Terunuma, “Development of Diamond Sensors for Beam Halo and Compton Spectrum Diagnostics After The Interaction Point of ATF2”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPME003, pp. 470-472.
- S. P. Antipov et al., “Single Crystal Diamond X-ray Lens Development”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3643-3644.
- M. J. Lee et al., “Mathematical Models for the Control Program of SLAC Linear Collider”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2155-2158.
- E. D. Gazazyan, G. G. Oksuzyan, E. S. Pogossian, and A. D. Ter-Pogossyan, “Electron Beam Monitor based on Waveguide with Thin Impedance Films”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP2A16, pp. 1318-1320.
- J. A. Caggiano et al., “Design of the Neutron Imaging Differential Pumping Line at LLNL”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1312-1314.
- S. S. Karkare, I. V. Bazarov, L. Cultrera, W. J. Schaff, X. G. Jin, and Y. Takeda, “Photoemission from III-V Semiconductor Cathodes”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 736-738.
- V. N. Litvinenko, S. H. Park, Y. Wu, and I. V. Pinayev, “The Duke XUV FEL Storage Ring Facility”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 6D066, pp. 834-836.
- U. Klein, M. Peiniger, and H. Vogel, “RF Superconductivity at Interatom”, in Proc. 4th Int. Conf. RF Superconductivity (SRF'89), Tsukuba, Japan, Aug. 1989, paper SRF89G08, pp. XX-XX.
- J. Staples, S. Abbott, R. Caylor, R. Gough, D. Howard, and R. MacGill, “A Compact Proton RFQ Injector for the Bevalac”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper MO3-05, pp. 48-50.
- R. I. Saban et al., “Coordination of the Commissioning of the LHC Technical Systems”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPC118, pp. 340-342.
- O. R. Blanco, P. Bambade, and R. Tomas, “CLIC 3 TeV Beam Size Optimization with Radiation Effects”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPWO003, pp. 1877-1879.
- R. O. Hettel et al., “Ideas for a Future PEP Light Source”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC023, pp. 2031-2033.
- A. Ratti, J. M. Brennan, J. Brodowski, E. Onillon, and J. Rose, “The RHIC Accelerating Cavity Prototype Tuner”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPQ17, pp. 2705-2707.
- P. A. Lin, C. K. Kuan, T. Y. Lee, H. Y. Lin, and I. C. Sheng, “Brazing and Helium Leaking Test for High Heat Load Components in the Taiwan Photon Source”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 4004-4006.
- N. Barov, J. S. Kim, R. H. Miller, and D. J. Newsham, “Novel Acceleration Structure Using Slot Resonance Coupling”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5PFP014, pp. 839-841.
- Y. Yano, A. Goto, K. Hatanaka, S. Motonaga, and H. Takebe, “Beam Injection and Extraction System of RIKEN Ring Cyclotron”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper I6-01, pp. 470-472.
- V. G. Dudnikov and C. M. Ankenbrandt, “Efficient Plasma Generation by Positive Circulating Beams”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPD045, pp. 1503-1505.
- R. C. York et al., “The NSCL Coupled Cyclotron Project - Overview and Status”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper K-01, pp. 687-691.
- S. Ramamoorthy, P. Pearson, and J. Smith, “Error Handling in the NSLS Control System”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPR07, pp. 2250-2252.
- K. W. Shepard, R. Benaroya, L. M. Bollinger, and C. H. Scheibelhut, “Split Ring Resonator for the Argonne Superconducting Heavy Ion Booster”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1147-1150.
- J. Skelly, C. Gardner, A. Kponou, A. Luccio, and K. Reece, “Generalized Emittance Measurements in a Beam Transport Line”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1473-1476.
- L. Liu et al., “Status of SIRIUS operation with users”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEOGA2, pp. 2586-2589.
- E. L?®corch?® and P. Lermine, “Use of the Ingres RDBMS inside the new Ganil Linux based control system”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper P1_087.
- S. A. Nikitin et al., “High-Efficiency Polarimeter Based on Intra-Beam Scattering at VEPP-4M”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPRI121, pp. 1954-1956.
- C. A. Lindstrom, E. Adli, J. Pfingstner, E. Marin, and D. Schulte, “Transverse Tolerances of a Multi-Stage Plasma Wakefield Accelerator”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2561-2564.
- L. Xiao, C.-K. Ng, J. E. Dey, and I. Kourbanis, “Second Harmonic Cavity Design for Project-X Main Injector”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPC087, pp. 2417-2419.
- L. David, E. Lecorche, T. T. Luong, and M. Ulrich, “The GANIL Computer Control System Renewal”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 830-833.
Back to search