Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. R. Howard, J. E. Coleman, and S. M. Lidia, “Studying the Emission Characteristics of Field Emission Cathodes with Various Geometries”, in Proc. NAPAC'22, Albuquerque, NM, USA, Aug. 2022, pp. 226-228. doi:10.18429/JACoW-NAPAC2022-MOPA79
[n] U. Wienands et al., “Status and Early Commissioning Results for the PEP-II High Energy Ring”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 6B009, pp. 315-317.
[n] E. Bleser, “Results from Commissioning the AGS Booster Orbit System”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3766-3769.
[n] T. Mattison, R. Cassel, A. Donaldson, G. Gross, and A. Harvey, “Operational Experience with SLC Damping Ring Kicker Magnets”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2331-2334.
[n] D. Rai et al., “Design and implementation of an instrumentation & control system for cathodes and radio-frequency interactions in extremes (CARIE) project”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2093-2096. doi:10.18429/JACoW-IPAC2024-WEPC57
[n] B. Sarkar, S. Bandyopadhyay, C. Datta, and D. Sarkar, “Software for Supervisory Control of the Trim Coil Power Supplies of the Kolkata Superconducting Cyclotron”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP011, pp. XX-XX.
[n] M. Abbaslou et al., “Design Considerations for a Proton Linac for a Compact Accelerator Based Neutron Source”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 878-883. doi:10.18429/JACoW-LINAC2022-FR1AA05
[n] L. Reid et al., “Acceleration of electrons from a linear accelerator by a laser driven plasma wave at CLARA”, presented at the IPAC'23, Venice, Italy, May 2023, paper THODA3, unpublished.
[n] S. Caspi et al., “Design and Construction of a 15 T, 120 mm Bore IR Quadrupole Magnet for LARP”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6PFP066, pp. 280-282.
[n] A. Laut, K. Thackston, C. Moeller, D. Packard, and H. Wang, “Models for power combining magnetrons in a magic tee”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1478-1481. doi:10.18429/JACoW-IPAC2024-TUPR26
[n] G. W. Foster et al., “Permanent Magnet Design for the Fermilab Main Injector Recycler Ring”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPE05, pp. 1298-1300.
[n] H. Brueck et al., “Time Dependence of Persistent-Current Field Distortions in the Superconducting HERA Magnets”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 329-332.
[n] C. Gardner and L. Ahrens, “A Method for Determining the Position, Angle and Other Injection Parameters of a Short Pulsed Beam in the Brookhaven AGS”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1888-1891.
[n] T. G. Banks et al., “Design development and R&D for CERN’s HL-LHC external beam dump”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2510-2513. doi:10.18429/JACoW-IPAC2023-TUPM122
[n] G. Hansen, K. Kishiyama, S. Shen, and P. V. Shoaff, “Design and Development of the Vacuum Systems for the APT Project ED&D Cryomodule”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA113, pp. 1336-1338.
[n] F. Toral et al., “Design and Calculation of a Superferric Combined Magnet for XFEL”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPLS096, pp. 2598-2600.
[n] D. C. Nguyen et al., “Operation of the High Brightness LINAC for the Advanced Free-Electron Laser Initiative at Los Alamos”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2970-2973.
[n] D. Gordon, A. Lal, C. E. Clayton, M. Everett, and C. Joshi, “A Novel Technique for Probing theTransverse Interactions Between an Electron Beam and a Plasma”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAB05, pp. 770-772.
[n] E. Naselli et al., “The First Measurement of Plasma Density by Means of an Interfero-Polarimetric Setup in a Compact ECR-Plasma Trap”, in Proc. ECRIS'18, Catania, Italy, Sep. 2018, pp. 102-106. doi:10.18429/JACoW-ECRIS2018-TUP11
[n] A. O. Borga, R. De Monte, M. Ferianis, L. Pavlovic, and M. Predonzani, “The Diagnostics' Back-End Platform Based on the In House Developed A|D|A And A|D|O Boards”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper TUPSM025, pp. 163-167.
[n] L. Ahrens et al., “High Intensity Proton Acceleration at the Brookhaven AGS - An Update”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7P001, pp. 89-91.
[n] T. Mattison, R. Cassel, A. Donaldson, H. Fischer, and D. Gough, “Pulse Shape Adjustment for the SLC Damping Ring Kickers”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 3156-3159.
[n] S. Shen et al., “Testing of Vacuum System for APT/LEDA RFQ”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA112, pp. 1333-1335.
[n] A. S. Setty, “Electrons Beam Dynamics of the 100 MeV Preinjector Helios for the SOLEIL Synchrotron”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPKF017, pp. 997-999.
[n] R. L. Ramjiawan, M. Aiba, W. Bartmann, Y. Dutheil, M. Hofer, and P. J. Hunchak, “Concepts and Considerations for FCC-ee Top-Up Injection Strategies”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2106-2109. doi:10.18429/JACoW-IPAC2022-WEPOTK025
[n] M. W. Gerring, A. Ashton, and R. D. Walton, “Open Source Contributions and Using OSGi Bundles at Diamond Light Source”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 598-601. doi:10.18429/JACoW-ICALEPCS2015-WEB3O01
[n] W. Chou, “A Hybrid Design of Project-X”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6PFP058, pp. 1415-1417.
[n] J. B. Yu et al., “Alignment and Calibration for Collimation System in CSNS/RCS”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3432-3435. doi:10.18429/JACoW-IPAC2017-WEPVA070
[n] G. B. Rosenthal et al., “First Results for a 50 MeV Beam Induced Fluorescence Monitor for Beam Profile Measurements”, in Proc. IBIC'23, Saskatoon, Canada, Sep. 2023, pp. 418-420. doi:10.18429/JACoW-IBIC2023-WEP030
[n] J. Madlung, A. Firjahn-Andersch, and A. Schempp, “A Single Bunch RFQ System for Heavy Ions”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPA03, pp. 908-910.
[n] W. Chou, “Variable Bunch Spacing in Super Collider”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAP03, pp. 440-442.
[n] W. Chou, “Status of the Proton Driver Study at Fermilab”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THP138, pp. 3285-3287.
[n] F. Zimmermann, J. T. Seeman, M. Zolotorev, and W. Stoeffl, “Trapped Macroparticles in Electron Storage Rings”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPG10, pp. 517-519.
[n] S. Wolff, “The Infrastructure for the TESLA Test Facility (TTF) - A Status Report”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPB09, pp. 680-682.
[n] W. Chou and J. Griffin, “Impedance Scaling and Impedance Control”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7V034, pp. 1724-1726.
[n] D. Humphries and R. Schlueter, “Harmonic Correction Rings for the PEP-II I.R. Quadrupole Magnets”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7P038, pp. 3315-3317.
[n] B. Hounsell, W. Kaabi, M. Klein, B. L. Militsyn, T. C. Q. Noakes, and C. P. Welsch, “Re-optimisation of the ALICE Gun Upgrade Design for the 500-pC Bunch Charge Requirements of PERLE”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2071-2074. doi:10.18429/JACoW-IPAC2019-TUPTS066
[n] E. Hoyer et al., “The U5.0 Undulator for the ALS”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2721-2724.
[n] K. Batchelor et al., “Operational Experience on the Brookhaven National Laboratory Accelerator Test Facility”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 736-739.
[n] P. Craievich et al., “Commissioning of the Cavity BPM for the FERMI@Elettra FEL Project”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper TUPD14, pp. 329-331.
[n] W. V. Hassenzahl et al., “Insertion Devices for the Advanced Light Source at LBL”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1222-1225.
[n] M. Gaowei, R. Begay, K. P. Mondal, J. Walsh, and Y. Yang, “Epitaxial growth of sodium potassium antimonide photocathodes”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper TUPM039, unpublished.
[n] A. Schempp, O. Engels, and F. Marhauser, “A VE-RFQ-Injector for a Cyclotron”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPA05, pp. 914-916.
[n] L. Bizel-Bizellot, M. Ellis, S. M. Pattalwar, M. D. Pendleton, P. A. Smith, and A. E. Wheelhouse, “Innovative Cryogenic Test Facility for Testing SRF Cavity Series Production”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 520-523. doi:10.18429/JACoW-SRF2017-TUPB060
[n] T. Pacey et al., “Recent experimental results from the dielectric wakefield acceleration program at CLARA facility”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1328-1331. doi:10.18429/JACoW-IPAC2023-TUODB1
[n] W. Chou, “Accelerator Physics Issues of a Very Large Hadron Collider”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7P010, pp. 130-132.
[n] J. Crone et al., “Simulation of longitudinal phase space measurements for the RUEDI ultrafast electron diffraction beamline”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3060-3063. doi:10.18429/JACoW-IPAC2024-THPC33
[n] R. Rimmer, H. Wang, and G. Wu, “Strongly HOM-Damped Multi-cell RF Cavities for High-current Applications”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper TUP36, pp. 392-396.
[n] M. Neubauer, K. Fant, J. Hodgson, J. Judkins, H. Schwarz, and R. A. Rimmer, “High-Power RF Window and Coupler Develoment for the PEP-II B Factory”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPR08, pp. 1803-1805.
[n] R. Hettel et al., “SPEAR-III: A Brighter Source at SSRL”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 6V049, pp. 838-840.
[n] W. Chou, “2 MW Upgrade of the Fermilab Main Injector”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper ROPA011, pp. 604-606.
[n] G. Cox et al., “Status of the CLARA Control System”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1517-1521. doi:10.18429/JACoW-ICALEPCS2017-THPHA063
[n] M. Blaskiewicz et al., “Ring RF and Longitudinal Dynamics in the SNS”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP3B03, pp. 1942-1944.
[n] A. Schempp et al., “Low-Frequency High-Current Spiral-RFQ Injectors”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TH-20, pp. 746-748.
[n] J. Klabunde, E. Malwitz, J. Friedrich, and A. Schempp, “Upgrade of the HLI-RFQ Accelerator (Oral Poster)”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TH-06, pp. 704-706.
[n] M. Calderon et al., “Test Results of Distributed Ion Pump Designs for the PEP-II Asymmetric B-Factory Collider”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2520-2523.
[n] M. Gerstel, A. Ashton, R. J. Gildea, K. Levik, and G. Winter, “Data Analysis Infrastructure for Diamond Light Source Macromolecular & Chemical Crystallography and Beyond”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1032. doi:10.18429/JACoW-ICALEPCS2019-WEMPR001
[n] M. W. Poole, J. N. Corlett, V. P. Suller, and S. L. Thomson, “Dynamic Aperture, Tune Space Characteristics and Sextupole Distribution in the Daresbury SRS”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1533-1536.
[n] F. S. Felber et al., “Relativistic Injection into a High-Current Betatron”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2781-2784.
[n] P. Bellomo, T. Jackson, and D. Shimer, “Progress on PEP-II Magnet Power Conversion System”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP090G, pp. 2346-2348.
For LaTeX
Use Complete Form
For BibTeX
References
- M. R. Howard, J. E. Coleman, and S. M. Lidia, “Studying the Emission Characteristics of Field Emission Cathodes with Various Geometries”, in Proc. North American Particle Accelerator Conf. (NAPAC'22), Albuquerque, NM, USA, Aug. 2022, pp. 226-228.
- U. Wienands et al., “Status and Early Commissioning Results for the PEP-II High Energy Ring”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 6B009, pp. 315-317.
- E. Bleser, “Results from Commissioning the AGS Booster Orbit System”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3766-3769.
- T. Mattison, R. Cassel, A. Donaldson, G. Gross, and A. Harvey, “Operational Experience with SLC Damping Ring Kicker Magnets”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2331-2334.
- D. Rai et al., “Design and implementation of an instrumentation & control system for cathodes and radio-frequency interactions in extremes (CARIE) project”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPC57, pp. 2093-2096.
- B. Sarkar, S. Bandyopadhyay, C. Datta, and D. Sarkar, “Software for Supervisory Control of the Trim Coil Power Supplies of the Kolkata Superconducting Cyclotron”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper TUP011, pp. XX-XX.
- M. Abbaslou et al., “Design Considerations for a Proton Linac for a Compact Accelerator Based Neutron Source”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 878-883.
- L. Reid et al., “Acceleration of electrons from a linear accelerator by a laser driven plasma wave at CLARA”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THODA3, unpublished.
- S. Caspi et al., “Design and Construction of a 15 T, 120 mm Bore IR Quadrupole Magnet for LARP”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6PFP066, pp. 280-282.
- A. Laut, K. Thackston, C. Moeller, D. Packard, and H. Wang, “Models for power combining magnetrons in a magic tee”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPR26, pp. 1478-1481.
- G. W. Foster et al., “Permanent Magnet Design for the Fermilab Main Injector Recycler Ring”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TPE05, pp. 1298-1300.
- H. Brueck et al., “Time Dependence of Persistent-Current Field Distortions in the Superconducting HERA Magnets”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 329-332.
- C. Gardner and L. Ahrens, “A Method for Determining the Position, Angle and Other Injection Parameters of a Short Pulsed Beam in the Brookhaven AGS”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1888-1891.
- T. G. Banks et al., “Design development and R&D for CERN’s HL-LHC external beam dump”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPM122, pp. 2510-2513.
- G. Hansen, K. Kishiyama, S. Shen, and P. V. Shoaff, “Design and Development of the Vacuum Systems for the APT Project ED&D Cryomodule”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUA113, pp. 1336-1338.
- F. Toral et al., “Design and Calculation of a Superferric Combined Magnet for XFEL”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPLS096, pp. 2598-2600.
- D. C. Nguyen et al., “Operation of the High Brightness LINAC for the Advanced Free-Electron Laser Initiative at Los Alamos”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2970-2973.
- D. Gordon, A. Lal, C. E. Clayton, M. Everett, and C. Joshi, “A Novel Technique for Probing theTransverse Interactions Between an Electron Beam and a Plasma”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RAB05, pp. 770-772.
- E. Naselli et al., “The First Measurement of Plasma Density by Means of an Interfero-Polarimetric Setup in a Compact ECR-Plasma Trap”, in Proc. 23th International Workshop on ECR Ion Sources (ECRIS'18), Catania, Italy, Sep. 2018, pp. 102-106.
- A. O. Borga, R. De Monte, M. Ferianis, L. Pavlovic, and M. Predonzani, “The Diagnostics' Back-End Platform Based on the In House Developed A|D|A And A|D|O Boards”, in Proc. 14th Beam Instrumentation Workshop (BIW'10), Santa Fe, NM, USA, May 2010, paper TUPSM025, pp. 163-167.
- L. Ahrens et al., “High Intensity Proton Acceleration at the Brookhaven AGS - An Update”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 7P001, pp. 89-91.
- T. Mattison, R. Cassel, A. Donaldson, H. Fischer, and D. Gough, “Pulse Shape Adjustment for the SLC Damping Ring Kickers”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 3156-3159.
- S. Shen et al., “Testing of Vacuum System for APT/LEDA RFQ”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUA112, pp. 1333-1335.
- A. S. Setty, “Electrons Beam Dynamics of the 100 MeV Preinjector Helios for the SOLEIL Synchrotron”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPKF017, pp. 997-999.
- R. L. Ramjiawan, M. Aiba, W. Bartmann, Y. Dutheil, M. Hofer, and P. J. Hunchak, “Concepts and Considerations for FCC-ee Top-Up Injection Strategies”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2106-2109.
- M. W. Gerring, A. Ashton, and R. D. Walton, “Open Source Contributions and Using OSGi Bundles at Diamond Light Source”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 598-601.
- W. Chou, “A Hybrid Design of Project-X”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6PFP058, pp. 1415-1417.
- J. B. Yu et al., “Alignment and Calibration for Collimation System in CSNS/RCS”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3432-3435.
- G. B. Rosenthal et al., “First Results for a 50 MeV Beam Induced Fluorescence Monitor for Beam Profile Measurements”, in Proc. 12th International Beam Instrumentation Conference (IBIC'23), Saskatoon, Canada # e.g. "Barcelona, Spain" or "San Francisco, CA, USA", Sep. 2023, paper WEP030, pp. 418-420.
- J. Madlung, A. Firjahn-Andersch, and A. Schempp, “A Single Bunch RFQ System for Heavy Ions”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WPA03, pp. 908-910.
- W. Chou, “Variable Bunch Spacing in Super Collider”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WAP03, pp. 440-442.
- W. Chou, “Status of the Proton Driver Study at Fermilab”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THP138, pp. 3285-3287.
- F. Zimmermann, J. T. Seeman, M. Zolotorev, and W. Stoeffl, “Trapped Macroparticles in Electron Storage Rings”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WPG10, pp. 517-519.
- S. Wolff, “The Infrastructure for the TESLA Test Facility (TTF) - A Status Report”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPB09, pp. 680-682.
- W. Chou and J. Griffin, “Impedance Scaling and Impedance Control”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 7V034, pp. 1724-1726.
- D. Humphries and R. Schlueter, “Harmonic Correction Rings for the PEP-II I.R. Quadrupole Magnets”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 7P038, pp. 3315-3317.
- B. Hounsell, W. Kaabi, M. Klein, B. L. Militsyn, T. C. Q. Noakes, and C. P. Welsch, “Re-optimisation of the ALICE Gun Upgrade Design for the 500-pC Bunch Charge Requirements of PERLE”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2071-2074.
- E. Hoyer et al., “The U5.0 Undulator for the ALS”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2721-2724.
- K. Batchelor et al., “Operational Experience on the Brookhaven National Laboratory Accelerator Test Facility”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 736-739.
- P. Craievich et al., “Commissioning of the Cavity BPM for the FERMI@Elettra FEL Project”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper TUPD14, pp. 329-331.
- W. V. Hassenzahl et al., “Insertion Devices for the Advanced Light Source at LBL”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1222-1225.
- M. Gaowei, R. Begay, K. P. Mondal, J. Walsh, and Y. Yang, “Epitaxial growth of sodium potassium antimonide photocathodes”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPM039, unpublished.
- A. Schempp, O. Engels, and F. Marhauser, “A VE-RFQ-Injector for a Cyclotron”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WPA05, pp. 914-916.
- L. Bizel-Bizellot, M. Ellis, S. M. Pattalwar, M. D. Pendleton, P. A. Smith, and A. E. Wheelhouse, “Innovative Cryogenic Test Facility for Testing SRF Cavity Series Production”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 520-523.
- T. Pacey et al., “Recent experimental results from the dielectric wakefield acceleration program at CLARA facility”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUODB1, pp. 1328-1331.
- W. Chou, “Accelerator Physics Issues of a Very Large Hadron Collider”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 7P010, pp. 130-132.
- J. Crone et al., “Simulation of longitudinal phase space measurements for the RUEDI ultrafast electron diffraction beamline”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPC33, pp. 3060-3063.
- R. Rimmer, H. Wang, and G. Wu, “Strongly HOM-Damped Multi-cell RF Cavities for High-current Applications”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper TUP36, pp. 392-396.
- M. Neubauer, K. Fant, J. Hodgson, J. Judkins, H. Schwarz, and R. A. Rimmer, “High-Power RF Window and Coupler Develoment for the PEP-II B Factory”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WPR08, pp. 1803-1805.
- R. Hettel et al., “SPEAR-III: A Brighter Source at SSRL”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 6V049, pp. 838-840.
- W. Chou, “2 MW Upgrade of the Fermilab Main Injector”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper ROPA011, pp. 604-606.
- G. Cox et al., “Status of the CLARA Control System”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1517-1521.
- M. Blaskiewicz et al., “Ring RF and Longitudinal Dynamics in the SNS”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP3B03, pp. 1942-1944.
- A. Schempp et al., “Low-Frequency High-Current Spiral-RFQ Injectors”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TH-20, pp. 746-748.
- J. Klabunde, E. Malwitz, J. Friedrich, and A. Schempp, “Upgrade of the HLI-RFQ Accelerator (Oral Poster)”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TH-06, pp. 704-706.
- M. Calderon et al., “Test Results of Distributed Ion Pump Designs for the PEP-II Asymmetric B-Factory Collider”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2520-2523.
- M. Gerstel, A. Ashton, R. J. Gildea, K. Levik, and G. Winter, “Data Analysis Infrastructure for Diamond Light Source Macromolecular & Chemical Crystallography and Beyond”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 1032.
- M. W. Poole, J. N. Corlett, V. P. Suller, and S. L. Thomson, “Dynamic Aperture, Tune Space Characteristics and Sextupole Distribution in the Daresbury SRS”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1533-1536.
- F. S. Felber et al., “Relativistic Injection into a High-Current Betatron”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2781-2784.
- P. Bellomo, T. Jackson, and D. Shimer, “Progress on PEP-II Magnet Power Conversion System”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP090G, pp. 2346-2348.
Back to search