Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. W. McKenzie et al., “High Repetition Rate S-band Photoinjector Design for the CLARA FEL”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper THP064, pp. 889-892.
[n] A. Faus-Golfe, C. Blanch Gutierrez, J. V. Civera-Navarrete, and J. J. Garc?¡a-Garrig??s, “Development and Test Benchmarks of the Beam Position Monitor Series for the TBL line of the CTF3 at CERN”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE051, pp. 1086-1088.
[n] P. V. Logachev et al., “Performance of 2 MeV, 2 kA, 200 ns Linear Induction Accelerator with Ultra Low Beam Emittance for X-Ray Flash Radiography”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEOAA02, pp. 1906-1908.
[n] Y. Jongen et al., “Current Status of the IBA C400 Cyclotron Project for Hadron Therapy”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPP120, pp. 1806-1808.
[n] P. Mantsch, J. Carson, M. J. Lamm, and A. Riddiford, “A New High-Gradient Correction Quadrupole for the Fermilab Luminosity Upgrade”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 512-515.
[n] S. M. Liuzzo et al., “Update on the EBS Storage Ring Beam Dynamics Digital Twin”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1306-1311. doi:10.18429/JACoW-ICALEPCS2023-THPDP010
[n] Z. Liu et al., “Collimation Design and Beam Loss Detection at FRIB”, in Proc. HB'16, Malmö, Sweden, Jul. 2016, pp. 400-403. doi:10.18429/JACoW-HB2016-WEPM8X01
[n] J.-E. Chen, Z. Y. Guo, and K. X. Liu, “The Progress of Accelerator Mass Spectrometry and their Applications in China”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THZH103, pp. 597-600.
[n] R. T. Jongma et al., “Design of the Nijmegen High-Resolution THz-FEL”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper TUAAU05, pp. 200-203.
[n] L. Hagge et al., “Experience and Benefits from PLM-based Parts Management at European XFEL”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPFI008, pp. 3306-3308.
[n] H. Aksakal, A. K. Ciftci, Z. Nergiz, D. Schulte, and F. Zimmermann, “Luminosity Upgrade of CLIC-LHC ep/gp Collider”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN064, pp. 2853-2855.
[n] A. Tuzikov et al., “Heavy Ion Injection Chain of NICA Collider”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 52-54. doi:10.18429/JACoW-RUPAC2018-TUCDMH01
[n] A. Novokhatski, M. Timm, and T. Weiland, “The Transverse Wakefields in the TESLA-FEL Transfer Line”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP31G, pp. 1350-1352.
[n] S. Binello, T. D, J. S. Laster, and D. P. Ottavio, “Monitoring Applications Once They Are in the User Community”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEA005, pp. 370-372.
[n] Y. Luo et al., “Head-on Beam-beam Compensation with Electron Lenses in the Relativistic Heavy Ion Collider”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC113, pp. 328-330.
[n] M. A. Palmer, “An Overview of the US Muon Accelerator Program”, in Proc. COOL'13, Mürren, Switzerland, Jun. 2013, paper MOAM2HA02, pp. 16-20.
[n] J. C. L. Brazier, A. Dinius, and P. Semanaz, “Evolution of the SPS Power Converter Controls Towards the LHC Era”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper WEAP017, pp. XX-XX.
[n] I. Podadera Aliseda, B. Bra??as, A. Ibarra, and J. Marroncle, “Design of Beam Position Monitors for the IFMIF-EVEDA accelerator”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper MOPD06, pp. 53-55.
[n] Y. Kurimoto, Y. H. Chin, T. Obina, M. Tobiyama, T. Toyama, and Y. Shobuda, “The Bunch by Bunch Feedback System in J-PARC Main Ring”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper TUPD74, pp. 482-484.
[n] P. Sha et al., “Research and Development of 650 MHz Cavities for CEPC”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 616. doi:10.18429/JACoW-SRF2021-WEPCAV012
[n] Y. M. Pischalnikov, E. Borissov, T. N. Khabiboulline, and J. C. Yun, “LCLS-II Tuner Assembly for the Prototype Cryomodule at FNAL”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 143-145. doi:10.18429/JACoW-NAPAC2016-MOPOB33
[n] A. A. Bulavskaya, Yu. M. Cherepennikov, A. A. Grigorieva, I. A. Miloichikova, and S. Stuchebrov, “Determination of Minimal Acceptable Sizes of Collimation Hole in Plastic Sample Forming Ejected Therapeutic High-Energy Electron Beam”, presented at the RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, paper MOPSA37, unpublished.
[n] M. Hu et al., “Uniform Longitudinal Beam Profiles in the Fermilab Recycler Using Adaptive RF Correction”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAS011, pp. 458-460.
[n] G. Di Pirro, A. Cianchi, D. Filippetto, S. Fioravanti, and E. Pace, “The Camera Acquisition System in the SPARC Control System”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP043, pp. 486-488.
[n] A. H. Lumpkin et al., “Higher-Order-Mode Effects in Tesla-Type Superconducting RF Cavities on Electron Beam Quality”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 612-615. doi:10.18429/JACoW-IPAC2018-TUXGBF2
[n] J. King, “Potential Hazards from Neutrino Radiation at MUON Colliders”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEBR6, pp. 318-320.
[n] A. Cattoni, G. Raffone, and C. Sanelli, “Magnets and Power Supplies for ARES”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1136-1139.
[n] D. Boehne, “Future Accelerator Projects and Collaboration with Industry”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 71-74.
[n] Z. Liu, S. M. Cousineau, J. Galambos, J. A. Holmes, X. Huang, and M. A. Plum, “Orbit Response Matrix Analysis Applied at SNS Ring”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper WGA15, pp. 89-91.
[n] A. Rossi, I. Collins, J. R. Knaster, P. Lepeule, and R. Veness, “Vacuum Calculations for the LHC Experimental Beam Chambers”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPAH129, pp. 3153-3155.
[n] Y. M. Zhou, S. S. Cao, J. Chen, and Y. B. Leng, “Prototype Design of Bunch Arrival Time Measurement System Based on Cavity Monitor for SHINE”, in Proc. IBIC'20, Santos, Brazil, Sep. 2020, pp. 154-157. doi:10.18429/JACoW-IBIC2020-WEPP24
[n] M. D. Woodley and P. J. Emma, “Measurement and Correction of Cross-Plane Coupling in Transport Lines”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper MOC19, pp. 196-198.
For LaTeX
Use Complete Form
For BibTeX
References
- J. W. McKenzie et al., “High Repetition Rate S-band Photoinjector Design for the CLARA FEL”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper THP064, pp. 889-892.
- A. Faus-Golfe, C. Blanch Gutierrez, J. V. Civera-Navarrete, and J. J. Garc?¡a-Garrig??s, “Development and Test Benchmarks of the Beam Position Monitor Series for the TBL line of the CTF3 at CERN”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPE051, pp. 1086-1088.
- P. V. Logachev et al., “Performance of 2 MeV, 2 kA, 200 ns Linear Induction Accelerator with Ultra Low Beam Emittance for X-Ray Flash Radiography”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEOAA02, pp. 1906-1908.
- Y. Jongen et al., “Current Status of the IBA C400 Cyclotron Project for Hadron Therapy”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPP120, pp. 1806-1808.
- P. Mantsch, J. Carson, M. J. Lamm, and A. Riddiford, “A New High-Gradient Correction Quadrupole for the Fermilab Luminosity Upgrade”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 512-515.
- S. M. Liuzzo et al., “Update on the EBS Storage Ring Beam Dynamics Digital Twin”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper THPDP010, pp. 1306-1311.
- Z. Liu et al., “Collimation Design and Beam Loss Detection at FRIB”, in Proc. 57th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'16), Malmö, Sweden, Jul. 2016, pp. 400-403.
- J.-E. Chen, Z. Y. Guo, and K. X. Liu, “The Progress of Accelerator Mass Spectrometry and their Applications in China”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper THZH103, pp. 597-600.
- R. T. Jongma et al., “Design of the Nijmegen High-Resolution THz-FEL”, in Proc. 30th Int. Free Electron Laser Conf. (FEL'08), Gyeongju, Korea, Aug. 2008, paper TUAAU05, pp. 200-203.
- L. Hagge et al., “Experience and Benefits from PLM-based Parts Management at European XFEL”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPFI008, pp. 3306-3308.
- H. Aksakal, A. K. Ciftci, Z. Nergiz, D. Schulte, and F. Zimmermann, “Luminosity Upgrade of CLIC-LHC ep/gp Collider”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMN064, pp. 2853-2855.
- A. Tuzikov et al., “Heavy Ion Injection Chain of NICA Collider”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 52-54.
- A. Novokhatski, M. Timm, and T. Weiland, “The Transverse Wakefields in the TESLA-FEL Transfer Line”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THP31G, pp. 1350-1352.
- S. Binello, T. D, J. S. Laster, and D. P. Ottavio, “Monitoring Applications Once They Are in the User Community”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEA005, pp. 370-372.
- Y. Luo et al., “Head-on Beam-beam Compensation with Electron Lenses in the Relativistic Heavy Ion Collider”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPC113, pp. 328-330.
- M. A. Palmer, “An Overview of the US Muon Accelerator Program”, in Proc. 9th Workshop on Beam Cooling and Related Topics (COOL'13), Mürren, Switzerland, Jun. 2013, paper MOAM2HA02, pp. 16-20.
- J. C. L. Brazier, A. Dinius, and P. Semanaz, “Evolution of the SPS Power Converter Controls Towards the LHC Era”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper WEAP017, pp. XX-XX.
- I. Podadera Aliseda, B. Bra??as, A. Ibarra, and J. Marroncle, “Design of Beam Position Monitors for the IFMIF-EVEDA accelerator”, in Proc. 9th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'09), Basel, Switzerland, May 2009, paper MOPD06, pp. 53-55.
- Y. Kurimoto, Y. H. Chin, T. Obina, M. Tobiyama, T. Toyama, and Y. Shobuda, “The Bunch by Bunch Feedback System in J-PARC Main Ring”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper TUPD74, pp. 482-484.
- P. Sha et al., “Research and Development of 650 MHz Cavities for CEPC”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 616.
- Y. M. Pischalnikov, E. Borissov, T. N. Khabiboulline, and J. C. Yun, “LCLS-II Tuner Assembly for the Prototype Cryomodule at FNAL”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 143-145.
- A. A. Bulavskaya, Yu. M. Cherepennikov, A. A. Grigorieva, I. A. Miloichikova, and S. Stuchebrov, “Determination of Minimal Acceptable Sizes of Collimation Hole in Plastic Sample Forming Ejected Therapeutic High-Energy Electron Beam”, presented at the 27th Russian Particle Accelerator Conference (RuPAC2021), Alushta, Crimea, Sep.-Oct. 2021, paper MOPSA37, unpublished.
- M. Hu et al., “Uniform Longitudinal Beam Profiles in the Fermilab Recycler Using Adaptive RF Correction”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAS011, pp. 458-460.
- G. Di Pirro, A. Cianchi, D. Filippetto, S. Fioravanti, and E. Pace, “The Camera Acquisition System in the SPARC Control System”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEP043, pp. 486-488.
- A. H. Lumpkin et al., “Higher-Order-Mode Effects in Tesla-Type Superconducting RF Cavities on Electron Beam Quality”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 612-615.
- J. King, “Potential Hazards from Neutrino Radiation at MUON Colliders”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEBR6, pp. 318-320.
- A. Cattoni, G. Raffone, and C. Sanelli, “Magnets and Power Supplies for ARES”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1136-1139.
- D. Boehne, “Future Accelerator Projects and Collaboration with Industry”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 71-74.
- Z. Liu, S. M. Cousineau, J. Galambos, J. A. Holmes, X. Huang, and M. A. Plum, “Orbit Response Matrix Analysis Applied at SNS Ring”, in Proc. 42nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'08), Nashville, TN, USA, Aug. 2008, paper WGA15, pp. 89-91.
- A. Rossi, I. Collins, J. R. Knaster, P. Lepeule, and R. Veness, “Vacuum Calculations for the LHC Experimental Beam Chambers”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPAH129, pp. 3153-3155.
- Y. M. Zhou, S. S. Cao, J. Chen, and Y. B. Leng, “Prototype Design of Bunch Arrival Time Measurement System Based on Cavity Monitor for SHINE”, in Proc. 9th Int. Beam Instrumentation Conf. (IBIC'20), Santos, Brazil, Sep. 2020, pp. 154-157.
- M. D. Woodley and P. J. Emma, “Measurement and Correction of Cross-Plane Coupling in Transport Lines”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper MOC19, pp. 196-198.
Back to search