Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] F. Osmic et al., “Overview of the Beam Diagnostics in the MedAustron Accelerator: Design Choices and Test Beam Commissioning”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPR002, pp. 774-776.
[n] P. Anthouard et al., “AIRIX Prototype Technological Results at CESTA”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7P071, pp. 1254-1256.
[n] L. Zeng et al., “The Beam-Based Alignment Simulation and Preliminary Experiment at SXFEL”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1804-1807. doi:10.18429/JACoW-IPAC2019-TUPRB054
[n] J. Zichy, Ch. Markovits, and L. Rezzonico, “The Design, Assembly and Performance of the SIN Beam Transfer Line”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper D-21, pp. 306-311.
[n] W. M. Roach, D. Beringer, C. Clavero, R. A. Lukaszew, and C. E. Reece, “Investigation of Epitaxial Niobium Thin Films Grown on Different Surfaces Suitable for SRF Cavities”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper THPO062, pp. 874-876.
[n] C. H. Huang, Y.-S. Cheng, P. C. Chiu, K. T. Hsu, D. Lee, and C. Y. Liao, “Vibration Measurement of the Magnets in the Storage Ring of TPS”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1112-1115. doi:10.18429/JACoW-IPAC2015-MOPTY075
[n] A. N. Ermakov, V. I. Shvedunov, and V. S. Skachkov, “A Fixed Gradient Rare Earth Permanent Alpha-Magnet”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP3B18, pp. 2125-2127.
[n] L. Wang et al., “Design of a Test Cryomodule for IMP ADS-Injector II”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPME020, pp. 3546-3548.
[n] A. H. Lumpkin, F. Sakamoto, and B. X. Yang, “Dual-Sweep Streak Camera Measurements of the APS User Beams”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAT086, pp. 4185-4187.
[n] J. S. Eldred, M. Backfish, C.-Y. Tan, R. M. Zwaska, and S. Kato, “Beam Tests of Diamond-Like Carbon Coating for Mitigation of Electron Cloud”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4497-4500. doi:10.18429/JACoW-IPAC2017-THPVA031
[n] A. Barbalace, A. Luchetta, G. Manduchi, C. Taliercio, B. Carvalho, and D. F. Valc?írcel, “Comparative Analysis of EPICS IOC and MARTe for the Development of a Hard Real-Time Control Application”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMN036, pp. 961-964.
[n] R. Racz et al., “Application of an ECR Ion Source for Ionic Functionalization of Implant Materials on the Nanoscale”, in Proc. ECRIS'14, Nizhny Novgorod, Russia, Aug. 2014, paper THOMMH02, pp. 135-139.
[n] T. L. Owens and O. A. Calvo, “Feedback Control of the Upgraded Linac at Fermilab”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1876-1879.
[n] K. Moriyama and T. Nakatani, “A Data Management Infrastructure for Neutron Scattering Experiments in J-PARC/MLF”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 834-837. doi:10.18429/JACoW-ICALEPCS2015-WEPGF060
[n] C. Feng, J. H. Chen, W. Fang, Q. Gu, D. Wang, and Z. T. Zhao, “Design of a Compact Hard X-Ray Free Electron Laser at SSRF”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper THPB16, pp. 626-628.
[n] C.-Y. Liu, Y. S. Wong, J.-C. Huang, and K.-B. Liu, “Analysis of the bi-bridge topology and power device circuit of the TPS booster dipole power supply”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3779-3781. doi:10.18429/JACoW-IPAC2023-WEPM088
[n] F. Saito, “APPLICATION OF AN ELECTRO-CHEMICAL PROCEDURE TO THE PRODUCTION OF 18F-PHARMACEUTICALS”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 19P01, pp. XX-XX.
[n] B. P. Murin, A. P. Durkin, O. Yu. Shlygin, and I. V. Shumakov, “Super High-Power RF Regotron-Type Generator for Linear Accelerator with High Mean Currents”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TH402, pp. 584-586.
[n] J.-C. Huang, C.-Y. Liu, K.-B. Liu, and Y. S. Wong, “Realization of temperature compensated TPS correction magnet power supply”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3782-3784. doi:10.18429/JACoW-IPAC2023-WEPM089
[n] D. A. Ovsyannikov, A. D. Ovsyannikov, “New Approach to Optimization of RFQ Radial Matching Section”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEA013, pp. 1351-1353.
[n] K. Saito et al., “High Gradient Performance by Electropolishing with 1300 MHz Single and Multi-cell Niobium Superconducting Cavities”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper TUP033, pp. 288-291.
[n] J. Burns, “Magnet Design for the DARHT Linear Induction Accelerators”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2110-2113.
[n] S. P. Moeller, “ASTRID - A Small Multi-Purpose Storage Ring”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 158-161.
[n] T. Kikuchi, S. Kawata, and K. Takayama, “Half-mini Beta Optics with a Bunch Rotation for Warm Dense Matter Science Facility in KEK”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAN066, pp. 1541-1543.
[n] V. V. Altsybeyev and D. A. Ovsyannikov, “Optimization of Beam Parameters in APF Channel”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP130, pp. 722-725.
[n] G. Tosin and R. A. Pimenta, “Some Remarks about Characterization of Magnetic Blocks with Helmholtz Coil”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC161, pp. 2386-2388.
[n] Y.-S. Cheng, J. Chen, P. C. Chiu, K. T. Hsu, C. H. Huang, and C. Y. Liao, “Development of EPICS Applications for the Taiwan Light Source”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1116-1119. doi:10.18429/JACoW-IPAC2015-MOPTY076
For LaTeX
Use Complete Form
For BibTeX
References
- F. Osmic et al., “Overview of the Beam Diagnostics in the MedAustron Accelerator: Design Choices and Test Beam Commissioning”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPR002, pp. 774-776.
- P. Anthouard et al., “AIRIX Prototype Technological Results at CESTA”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 7P071, pp. 1254-1256.
- L. Zeng et al., “The Beam-Based Alignment Simulation and Preliminary Experiment at SXFEL”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1804-1807.
- J. Zichy, Ch. Markovits, and L. Rezzonico, “The Design, Assembly and Performance of the SIN Beam Transfer Line”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper D-21, pp. 306-311.
- W. M. Roach, D. Beringer, C. Clavero, R. A. Lukaszew, and C. E. Reece, “Investigation of Epitaxial Niobium Thin Films Grown on Different Surfaces Suitable for SRF Cavities”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper THPO062, pp. 874-876.
- C. H. Huang, Y.-S. Cheng, P. C. Chiu, K. T. Hsu, D. Lee, and C. Y. Liao, “Vibration Measurement of the Magnets in the Storage Ring of TPS”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1112-1115.
- A. N. Ermakov, V. I. Shvedunov, and V. S. Skachkov, “A Fixed Gradient Rare Earth Permanent Alpha-Magnet”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP3B18, pp. 2125-2127.
- L. Wang et al., “Design of a Test Cryomodule for IMP ADS-Injector II”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPME020, pp. 3546-3548.
- A. H. Lumpkin, F. Sakamoto, and B. X. Yang, “Dual-Sweep Streak Camera Measurements of the APS User Beams”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAT086, pp. 4185-4187.
- J. S. Eldred, M. Backfish, C.-Y. Tan, R. M. Zwaska, and S. Kato, “Beam Tests of Diamond-Like Carbon Coating for Mitigation of Electron Cloud”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4497-4500.
- A. Barbalace, A. Luchetta, G. Manduchi, C. Taliercio, B. Carvalho, and D. F. Valc?írcel, “Comparative Analysis of EPICS IOC and MARTe for the Development of a Hard Real-Time Control Application”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPMN036, pp. 961-964.
- R. Racz et al., “Application of an ECR Ion Source for Ionic Functionalization of Implant Materials on the Nanoscale”, in Proc. 21st Int. Workshop on ECR Ion Sources (ECRIS'14), Nizhny Novgorod, Russia, Aug. 2014, paper THOMMH02, pp. 135-139.
- T. L. Owens and O. A. Calvo, “Feedback Control of the Upgraded Linac at Fermilab”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1876-1879.
- K. Moriyama and T. Nakatani, “A Data Management Infrastructure for Neutron Scattering Experiments in J-PARC/MLF”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 834-837.
- C. Feng, J. H. Chen, W. Fang, Q. Gu, D. Wang, and Z. T. Zhao, “Design of a Compact Hard X-Ray Free Electron Laser at SSRF”, in Proc. 32nd Int. Free Electron Laser Conf. (FEL'10), Malmö, Sweden, Aug. 2010, paper THPB16, pp. 626-628.
- C.-Y. Liu, Y. S. Wong, J.-C. Huang, and K.-B. Liu, “Analysis of the bi-bridge topology and power device circuit of the TPS booster dipole power supply”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPM088, pp. 3779-3781.
- F. Saito, “APPLICATION OF AN ELECTRO-CHEMICAL PROCEDURE TO THE PRODUCTION OF 18F-PHARMACEUTICALS”, in Proc. 17th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'04), Tokyo, Japan, Oct. 2004, paper 19P01, pp. XX-XX.
- B. P. Murin, A. P. Durkin, O. Yu. Shlygin, and I. V. Shumakov, “Super High-Power RF Regotron-Type Generator for Linear Accelerator with High Mean Currents”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TH402, pp. 584-586.
- J.-C. Huang, C.-Y. Liu, K.-B. Liu, and Y. S. Wong, “Realization of temperature compensated TPS correction magnet power supply”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPM089, pp. 3782-3784.
- D. A. Ovsyannikov, A. D. Ovsyannikov, “New Approach to Optimization of RFQ Radial Matching Section”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEA013, pp. 1351-1353.
- K. Saito et al., “High Gradient Performance by Electropolishing with 1300 MHz Single and Multi-cell Niobium Superconducting Cavities”, in Proc. 9th Int. Conf. RF Superconductivity (SRF'99), Santa Fe, NM, USA, Nov. 1999, paper TUP033, pp. 288-291.
- J. Burns, “Magnet Design for the DARHT Linear Induction Accelerators”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2110-2113.
- S. P. Moeller, “ASTRID - A Small Multi-Purpose Storage Ring”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 158-161.
- T. Kikuchi, S. Kawata, and K. Takayama, “Half-mini Beta Optics with a Bunch Rotation for Warm Dense Matter Science Facility in KEK”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAN066, pp. 1541-1543.
- V. V. Altsybeyev and D. A. Ovsyannikov, “Optimization of Beam Parameters in APF Channel”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP130, pp. 722-725.
- G. Tosin and R. A. Pimenta, “Some Remarks about Characterization of Magnetic Blocks with Helmholtz Coil”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC161, pp. 2386-2388.
- Y.-S. Cheng, J. Chen, P. C. Chiu, K. T. Hsu, C. H. Huang, and C. Y. Liao, “Development of EPICS Applications for the Taiwan Light Source”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1116-1119.
Back to search