Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] W. A. Barth et al., “High Brilliance Uranium Beams for FAIR”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2052-2054. doi:10.18429/JACoW-IPAC2016-WEOBA03
[n] S.-H. Kim et al., “Status of the SNS Cryomodule Test”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS076, pp. 2511-2513.
[n] J. Y. Zhu, X. Li, Z. J. Lu, and J. B. Yu, “Design of a 166.6 MHz HOM Damped Copper Cavity for the Southern Advanced Photon Source”, in Proc. FLS'23, Luzern, Switzerland, Aug.-Sep. 2023, pp. 207-210. doi:10.18429/JACoW-FLS2023-WE4P33
[n] J. Dovc et al., “New Abeans for TINE Java Control Applications”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper THAP025, pp. XX-XX.
[n] M. Yoshimoto et al., “Recent Beam Studies of the POP FFAG Proton Synchrotron”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MOPA012, pp. 51-53.
[n] W. C. Barry, J. W. Heefner, G. S. Jones, E. Perry, and R. Rossmanith, “Beam Position Measurement in the CEBAF Recirculating Linacs by use of Pseudorandom Pulse Sequences”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 723-726.
[n] A. Gonias, M. T. Heron, E. Pietarinen, J. Pietarinen, and Y. S. Chernousko, “Metrological Testing of DLS Timing System”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper WPPB23, pp. 445-447.
[n] R. Baartman, M. K. Craddock, G. Dutto, T. Kuo, and B. Milton, “A Possible High Current H- Injector for Cyclotron-Based Energy Amplifier" Accelerator"”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP110G, pp. 593-595.
[n] F. Asvesta et al., “High Intensity Studies in the CERN Proton Synchrotron Booster”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2056-2059. doi:10.18429/JACoW-IPAC2022-WEPOTK011
[n] N. Vallis et al., “Enhancing e+ sources for future colliders through conical converter targets”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper TUPC51, unpublished.
[n] L. B. Jones et al., “The Commissioning of Tess: An Experimental Facility for Measuring the Electron Energy Distribution From Photocathodes”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper TUPSO33, pp. 290-293.
[n] T. J. Ring, M. B. Quinlan, and G. Wu, “Low Particulates Nitrogen Purge and Backfill during Prototype HB650 Cryomodule String Assembly”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 765-767. doi:10.18429/JACoW-SRF2023-WEPWB076
[n] P. Muggli, M. Babzien, E. Kallos, K. Kusche, and V. Yakimenko, “Generation of Electron Microbunches Trains with Adjustable Sub-picosecond Spacing for PWFA and FEL applications”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP146, pp. 2830-2832.
[n] A. Raghavi and N. Mahdizadeh, “FEL-IFEL, a Crossed Field Wiggler Scheme for Energy Transfer Between Two Electromagnetic Waves”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper MOPB12, pp. 68-70.
[n] V. Akcelik et al., “Thermal Analysis of SCRF Cavity Couplers Using Parallel Multiphysics Tool TEM3P”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5PFP071, pp. 4473-4475.
[n] G. Gallo, L. Allegra, G. Costa, E. Messina, and E. Zappal?â, “Mechanical Aspects of the LNS Superconducting Cyclotron Upgrade”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 322-324. doi:10.18429/JACoW-Cyclotrons2016-THP09
[n] E. Kikutani and M. Tobiyama, “Strategy for Developing Fast Bunch Feedback Systems for KEKB”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4P062, pp. 2332-2334.
[n] S. Appel et al., “Automatized Optimization of Beam Lines Using Evolutionary Algorithms”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1906-1910. doi:10.18429/JACoW-ICALEPCS2017-THPHA196
[n] M. Mu??oz and A. L??deke, “Top-Up Operation at the Swiss Light Source”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPRI012, pp. 721-723.
[n] A. Kabe, K. Egawa, K. Endo, and K. Takayama, “Precise Alignment of Magnets in the TRISTAN Main Ring”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1648-1651.
[n] C. Bourat and G. D'Auria, “Beam Dynamics in the Bunching System for ELETTRA”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1759-1762.
[n] H. G. Blosser, “Invited Paper: Applications of Superconducting Cyclotrons”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper E-01, pp. 137-144.
[n] R. Abela, W. Joho, P. Marchand, S. V. Milton, and L. Z. Rivkin, “Design Considerations for a Swiss Light Source (SLS)”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 486-489.
For LaTeX
Use Complete Form
For BibTeX
References
- W. A. Barth et al., “High Brilliance Uranium Beams for FAIR”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2052-2054.
- S.-H. Kim et al., “Status of the SNS Cryomodule Test”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMS076, pp. 2511-2513.
- J. Y. Zhu, X. Li, Z. J. Lu, and J. B. Yu, “Design of a 166.6 MHz HOM Damped Copper Cavity for the Southern Advanced Photon Source”, in Proc. 67th ICFA Advanced Beam Dynamics Workshop on Future Light Sources (FLS'23), Luzern, Switzerland, Aug.-Sep. 2023, paper WE4P33, pp. 207-210.
- J. Dovc et al., “New Abeans for TINE Java Control Applications”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper THAP025, pp. XX-XX.
- M. Yoshimoto et al., “Recent Beam Studies of the POP FFAG Proton Synchrotron”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MOPA012, pp. 51-53.
- W. C. Barry, J. W. Heefner, G. S. Jones, E. Perry, and R. Rossmanith, “Beam Position Measurement in the CEBAF Recirculating Linacs by use of Pseudorandom Pulse Sequences”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 723-726.
- A. Gonias, M. T. Heron, E. Pietarinen, J. Pietarinen, and Y. S. Chernousko, “Metrological Testing of DLS Timing System”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper WPPB23, pp. 445-447.
- R. Baartman, M. K. Craddock, G. Dutto, T. Kuo, and B. Milton, “A Possible High Current H- Injector for Cyclotron-Based Energy Amplifier" Accelerator"”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP110G, pp. 593-595.
- F. Asvesta et al., “High Intensity Studies in the CERN Proton Synchrotron Booster”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2056-2059.
- N. Vallis et al., “Enhancing e+ sources for future colliders through conical converter targets”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPC51, unpublished.
- L. B. Jones et al., “The Commissioning of Tess: An Experimental Facility for Measuring the Electron Energy Distribution From Photocathodes”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper TUPSO33, pp. 290-293.
- T. J. Ring, M. B. Quinlan, and G. Wu, “Low Particulates Nitrogen Purge and Backfill during Prototype HB650 Cryomodule String Assembly”, in Proc. 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper WEPWB076, pp. 765-767.
- P. Muggli, M. Babzien, E. Kallos, K. Kusche, and V. Yakimenko, “Generation of Electron Microbunches Trains with Adjustable Sub-picosecond Spacing for PWFA and FEL applications”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP146, pp. 2830-2832.
- A. Raghavi and N. Mahdizadeh, “FEL-IFEL, a Crossed Field Wiggler Scheme for Energy Transfer Between Two Electromagnetic Waves”, in Proc. 32nd Int. Free Electron Laser Conf. (FEL'10), Malmö, Sweden, Aug. 2010, paper MOPB12, pp. 68-70.
- V. Akcelik et al., “Thermal Analysis of SCRF Cavity Couplers Using Parallel Multiphysics Tool TEM3P”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5PFP071, pp. 4473-4475.
- G. Gallo, L. Allegra, G. Costa, E. Messina, and E. Zappal?â, “Mechanical Aspects of the LNS Superconducting Cyclotron Upgrade”, in Proc. 21th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'16), Zurich, Switzerland, Sep. 2016, pp. 322-324.
- E. Kikutani and M. Tobiyama, “Strategy for Developing Fast Bunch Feedback Systems for KEKB”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 4P062, pp. 2332-2334.
- S. Appel et al., “Automatized Optimization of Beam Lines Using Evolutionary Algorithms”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1906-1910.
- M. Mu??oz and A. L??deke, “Top-Up Operation at the Swiss Light Source”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPRI012, pp. 721-723.
- A. Kabe, K. Egawa, K. Endo, and K. Takayama, “Precise Alignment of Magnets in the TRISTAN Main Ring”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1648-1651.
- C. Bourat and G. D'Auria, “Beam Dynamics in the Bunching System for ELETTRA”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1759-1762.
- H. G. Blosser, “Invited Paper: Applications of Superconducting Cyclotrons”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper E-01, pp. 137-144.
- R. Abela, W. Joho, P. Marchand, S. V. Milton, and L. Z. Rivkin, “Design Considerations for a Swiss Light Source (SLS)”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 486-489.
Back to search