JaCoW Logo

Reference Search

Warning
Some papers titles are all uppercase, you must correct this before using this reference.

The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	M. Otani et al., “Muon Profile Measurement After Acceleration With a Radio-Frequency Quadrupole Linac”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 977-980. doi:10.18429/JACoW-IPAC2018-TUPAK009
[n]	J. D. Herbert, R. J. Reid, and T. M. Weston, “Preliminary Design of the Vacuum System for DIAMOND”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP041L, pp. 2506-2508. 
[n]	T. Nishidano et al., “Performance Estimation of Vacuum System Components Including Crotch and Absorber”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2298-2301. 
[n]	H. Padamsee, “SRF for Neutrino Factories”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper TA007, pp. XX-XX. 
[n]	A. C. de Lira and P. Bellomo, “SPEAR3 INTERMEDIATE DC MAGNET POWER SUPPLIES”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPKF083, pp. 1798-1800. 
[n]	M. Farkhondeh, C. Sibley, R. Averill, S. Sobczynski, and W. Sapp, “Electrostatic Septa Design and Performance for Injection and Extraction to and from the MIT-Bates South Hall Ring (SHR)”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1372-1375. 
[n]	C. E. Reece, “Exploration and Comparison of Hydrodynamic and Thermal Properties of Horizontal and Vertical Electropolishing Configurations with Various Boundary Conditions”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THPPO061, pp. 742-745. 
[n]	T. Henderson et al., “Design of the PEP-II Low-Energy Ring Arc Magnets”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAP01, pp. 1322-1324. 
[n]	G. Azzopardi, A. Mereghetti, S. Redaelli, B. Salvachua, G. Valentino, and A. Muscat, “Automatic Angular Alignment of LHC Collimators”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 928-933. doi:10.18429/JACoW-ICALEPCS2017-TUPHA204
[n]	P. He, “Accelerator Vacuum Technology Challenges for Next-Generation Synchrotron-Light Sources”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4830-4835. doi:10.18429/JACoW-IPAC2017-FRXAB1
[n]	K. Akai, E. Ezura, and Y. Yamazaki, “Design of the KEKB RF System”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPQ08, pp. 1735-1737. 
[n]	B. Buonomo, D. G. C. Di Giulio, L. G. Foggetta, and P. Valente, “A Hardware and Software Overview on the New BTF Transverse Profile Monitor”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 818-821. doi:10.18429/JACoW-IBIC2016-WEPG73
[n]	E. N. Jongewaard et al., “RF Gun Photocathode Research at SLAC”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPP046, pp. 664-666. 
[n]	H. Danared, A. K?ñllberg, and A. Simonsson, “Studies of Cooling and Deceleration at CRYRING for FLAIR”, in Proc. COOL'07, Bad Kreuznach, Germany, Sep. 2007, paper FRM2C04, pp. 234-237. 
[n]	Y. Takeuchi et al., “HOM Absorber for the KEKB Normal Conducting Cavity”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPR05, pp. 1797-1799. 
[n]	J. Kirchgessner, D. Moffat, H. Padamsee, D. Rubin, J. Sears, and Q. S. Shu, “Superconducting RF Activities at Cornell University”, in Proc. SRF'89, Tsukuba, Japan, Aug. 1989, paper SRF89A03, pp. XX-XX. 
[n]	F.-J. Decker, S. D. Anderson, D. Kharakh, and M. K. Sullivan, “Permanent Magnet Skew Quadrupoles for the Low Emittance LER Lattice of PEP-II”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC007, pp. 2987-2989. 
[n]	J. Fujita, M. G. Cherney, D. Arkhipkin, and J. Lauret, “Development of MQTT-Channel Access Bridge”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1916-1918. doi:10.18429/JACoW-ICALEPCS2017-THPHA198
[n]	K. Anderson and Y. Hao, “Koopman operator method for nonlinear dynamics analysis using symplectic neural networks”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 713-716. doi:10.18429/JACoW-IPAC2024-MOPS10
[n]	G. Gatti et al., “Metal Film Photocathodes for High Brightness Electron Injectors”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH027, pp. 104-106. 
[n]	K. Bilko, M. Brugger, R. Garcia Alia, F. J. Harden, Y. Kadi, and O. Stein, “Detailed Analysis Of The Baseline Dose Levels And Localized Radiation Spikes In The Arc Sections Of The Large Hadron Collider During Run 2”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4009-4012. doi:10.18429/JACoW-IPAC2019-THPRB083
[n]	A. K?ñllberg et al., “Instrumentation in DESIREE”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 131-133. doi:10.18429/JACoW-IBIC2015-MOPB040
[n]	H. Padamsee et al., “Cornell Status Report”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper TL005, pp. XX-XX. 
[n]	C. E. Reece, J. K. Spradlin, O. Trofimova, and A-M. Valente-Feliciano, “Identifying Specific Cryomodule and Cleanroom Particulate Contamination: Understanding Legacy Issues and Providing New Feedback Standards”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 758-762. doi:10.18429/JACoW-SRF2019-WETEB2
[n]	J. Seeman, “Beam Dynamics Verification in Linacs of Linear Colliders”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper TH1-03, pp. 487-493. 
[n]	A. Bocci et al., “Fast IR Array Detector for Transverse Beam Diagnostics at DANE”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPD098, pp. 936-938. 
[n]	Y. Ma, D. Z. Guo, P. He, B. Liu, and Y. C. Yang, “Preparation and Characterization of Non-Evaporable Ti-Zr-V Getter Films for HEPS”, in Proc. FLS'18, Shanghai, China, Mar. 2018, pp. 125-127. doi:10.18429/JACoW-FLS2018-WEP2PT023
[n]	S. Belomestnykh and H. Padamsee, “Performance of the CESR Superconducting RF System and Future Plans”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper SA003, pp. XX-XX. 
[n]	M. Hara, K. Mitomori, T. Wada, and F. Kikuchi, “Three Dimensional Analysis of RF Electromagnetic Field by the Finite Element Method”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper I2-03, pp. 337-340. 
[n]	F.-J. Decker, M. H. Donald, R. H. Iverson, A. Kulikov, G. C. Pappas, and M. Weaver, “Diagnosing the PEP-II Injection System”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT127, pp. 833-835. 
[n]	D. Trines, “TESLA Project Overview”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper FRA003, pp. 605-609. 
[n]	T. Tydecks, D. Alves, T. E. Levens, M. Wendt, and J. Wenninger, “Status of the LHC Schottky Monitors”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 247-249. doi:10.18429/JACoW-IPAC2018-MOPMF058
[n]	M. Pisharody et al., “High Power Window Tests on a 500 MHz Planar Window for the CESR Upgrade”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPQ02, pp. 1720-1722. 
[n]	J. M. Weber and M. J. Chin, “Continuous Bunch-by-Bunch 16-bit Data Acquisition using DDR2 SDRAM Connected to an FPGA”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper TUPSM112, pp. 483-486. 
[n]	A. H. Botha, “Invited Paper: The Status of the South African National Accelerator Centre”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper A-05, pp. 1896-1903. 
[n]	A. A. Rossi et al., “Purification of 6 GHz Cavities by Induction Heating”, in Proc. SRF'13, Paris, France, Sep. 2013, paper TUIOC05, pp. 419-423. 
[n]	E. F. Valderrama et al., “Nb Film Growth on Crystalline and Amorphous Substrates”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper THPO069, pp. 898-904. 
[n]	F. Van der Veken et al., “Collimation performance of the 400MJ LHC beam at 6.8 TeV”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2499-2502. doi:10.18429/JACoW-IPAC2023-TUPM119
[n]	A. Goto, N. Kishida, N. Nakanishi, T. Wada, and Y. Yano, “Calculation of Injection and Extraction Orbits for the IPCR SSC”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper EP-18, pp. 439-443. 
[n]	J. Pflueger, “Insertion Devices For 4th Generation Light Sources”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUAR3, pp. 157-161. 
[n]	C. E. Reece, “An Experimental Analysis of Effective EP Parameters for Low-Frequency Cylindrical Nb Cavities”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 472-476. doi:10.18429/JACoW-SRF2019-TUP029
[n]	S. S. Gilardoni et al., “Installation and Hardware Commissioning of the Multi-Turn Extraction at the CERN Proton Synchrotron”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6RFP023, pp. 1581-1583. 
[n]	C. Sanelli et al., “A New Hybrid Tunable Quadrupole Proposal for the DAPhiNE Main Ring Low Beta Insertions”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1388-1391. 
[n]	K. Skoufaris, Y. Papaphilippou, J. Laskar, and Ch. Skokos, “A Benchmark Study of a High Order Symplectic Integration Method With Only Positive Steps”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3111-3114. doi:10.18429/JACoW-IPAC2018-THPAF060
[n]	B. Yee-Rendon, R. Muto, K. Ohmi, K. Satou, M. Tomizawa, and T. Toyama, “Electron Cloud Simulations for the Main Ring of J-PARC”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4436-4438. doi:10.18429/JACoW-IPAC2017-THPVA010

For LaTeX

Use Complete Form

For BibTeX

References

Back to search